Abstract
The coal’s mechanical properties have a significant influence on mining safety and the mine environment. Preparing a standard sample and conducting repeat mechanical testing are challenging because the coal is primarily soft, fragmented, and rich in developed fractures. This study used nanoindentation technology, combined with X-ray diffraction, small-angle X-ray, a high magnification microscope, and mechanical parameter scale-up analysis, to study the micromechanical of three coals being dominated by heterogeneous components and pores. The results show that load–displacement curves with different maximum loads (50 mN, 100 mN, and 200 mN) all appear the pop-in events, and coal heterogeneity affects the frequency of their occurrence. As the maximum load is increased, pop-in event of DSC appears once each, YW increases from zero to three times and HM decreases from four to two times. The heterogeneity of pore structure has little effect on residual displacement, which is mainly affected by hard minerals, and hard minerals reduce the law that residual displacement increases with the increase in maximum load. The micromechanical parameters of soft coals are mainly affected by large pores, while hard coals are mainly affected by hard minerals. The coal’s heterogeneity does not affect the linear relationship between hardness and elastic modulus, but stronger heterogeneity will weaken the linear relationship between fracture toughness and elastic modulus. Compared to the mechanical parameters after scale-up, the values obtained based on nanoindentation are less than 15.588% larger, and the increase in the heterogeneity and hard minerals can make the predicted parameters more accurate. The nanoindentation technique can not only provide an efficient and accurate method for studying the mechanical properties of heterogeneous coal at the nanoscale, an important guide for large-scale coal.
Similar content being viewed by others
Data availability
Please contact the corresponding author for data requests.
References
Abou-Chakra Guéry A, Cormery F, Shao JF, Kondo D (2010) A comparative micromechanical analysis of the effective properties of a geomaterial: effect of mineralogical compositions. Comput Geotech 37:585–593. https://doi.org/10.1016/j.compgeo.2010.02.008
Bhuiyan MAH, Bodrud-Doza M, Rakib MA, Saha BB, Islam SMD (2021) Appraisal of pollution scenario, sources and public health risk of harmful metals in mine water of Barapukuria coal mine industry in Bangladesh. Environ Sci Pollut Res Int 28:22105–22122. https://doi.org/10.1007/s11356-020-11999-z
Borodich FM, Bull SJ, Epshtein SA (2015) Nanoindentation in studying mechanical properties of heterogeneous materials. J Min Sci 51:470–476. https://doi.org/10.1134/S1062739115030072
Cao D, Li X, Zhang S (2007) Influence of tectonic stress on coalification: stress degradation mechanism and stress polycondensation mechanism. Sci China, Ser D Earth Sci 50:43–54. https://doi.org/10.1007/s11430-007-2023-3
Cao Q, Yan R, Yang L, Takaoka M (2023) Effects of water–coal interactions on coal mine water quality in China: a lixiviation experiment and actual water quality investigation. Environ Sci Pollut Res Int 30:107350–107364. https://doi.org/10.1007/s11356-022-25116-9
Chao J, Chu T, Yu M et al (2021) An experimental study on the oxidation kinetics characterization of broken coal under stress loading. Fuel 287:119515. https://doi.org/10.1016/j.fuel.2020.119515
Cheng Y, Pan Z (2020) Reservoir properties of Chinese tectonic coal: a review. Fuel 260:116350. https://doi.org/10.1016/j.fuel.2019.116350
Epshtein SA, Borodich FM, Bull SJ (2015) Evaluation of elastic modulus and hardness of highly inhomogeneous materials by nanoindentation. Applied Physics. A, Mater Sci Proc 119:325–335. https://doi.org/10.1007/s00339-014-8971-5
Feng H, Zhou J, Chai B et al (2020) Groundwater environmental risk assessment of abandoned coal mine in each phase of the mine life cycle: a case study of Hongshan coal mine, North China. Environ Sci Pollut Res Int 27:42001–42021. https://doi.org/10.1007/s11356-020-10056-z
Hu Z, Lynne K, Delfanian F (2015) Characterization of materials’ elasticity and yield strength through micro-/nano-indentation testing with a cylindrical flat-tip indenter. J Mater Res 30:578–591. https://doi.org/10.1557/jmr.2015.4
Huang Y, Shen WQ, Shao JF, Abou-Chakra Guéry A, Jia Y (2014) Multi-scale modeling of time-dependent behavior of claystones with a viscoplastic compressible porous matrix. Mech Mater 79:25–34. https://doi.org/10.1016/j.mechmat.2014.08.003
Karacan C, Ruiz F, Cotè M, Phipps S (2011) Coal mine methane: a review of capture and utilization practices with benefits to mining safety and to greenhouse gas reduction. Int J Coal Geol 86:121–156. https://doi.org/10.1016/j.coal.2011.02.009
Kossovich EL, Borodich FM, Epshtein SA, Galanov BA, Minin MG, Prosina VA (2019) Mechanical, structural and scaling properties of coals: depth-sensing indentation studies. Applied Physics. A, Materials Science & Processing 125:1–15. https://doi.org/10.1007/s00339-018-2282-1
Kossovich E, Borodich F, Epshtein S, Galanov B, Minin M, Prosina V (2019) Mechanical, structural and scaling properties of coals: depth-sensing indentation studies. Applied Physics A 125. https://doi.org/10.1007/s00339-018-2282-1
Kossovich E, Epshtein S, Krasilova V, Hao J, Minin M (2023) Effects of coals microscale structural features on their mechanical properties, propensity to crushing and fine dust formation. Int J Coal Sci Technol 10. https://doi.org/10.1007/s40789-023-00578-5
Le T, Oh J (2022) Longwall face stability analysis from a discontinuum-discrete fracture network modelling. Tunn Undergr Space Technol 124:104480. https://doi.org/10.1016/j.tust.2022.104480
Li W, Jiang B, Gu S (2022) Effect of water on mechanical properties of coal measures mudstone using nanoindentation. Geofluids 2022:1–16. https://doi.org/10.1155/2022/9032572
Li Y, Chen J, Elsworth D, Pan Z, Ma X (2022) Nanoscale mechanical property variations concerning mineral composition and contact of marine shale. Geosci Front 13:101405. https://doi.org/10.1016/j.gsf.2022.101405
Li Y, Chen J, Yang J, Liu J, Tong W (2022) Determination of shale macroscale modulus based on microscale measurement: a case study concerning multiscale mechanical characteristics. Pet Sci 19:1262–1275. https://doi.org/10.1016/j.petsci.2021.10.004
Li Y, Pan S, Ning S, Shao L, Jing Z, Wang Z (2022) Coal measure metallogeny: metallogenic system and implication for resource and environment. Sci China Earth Sci 65:1211–1228. https://doi.org/10.1007/s11430-021-9920-4
Li G, Li Z, Du F, Cao Z (2023) Mechanical mechanism of rib spalling and sensitivity analysis of gangue parameters to rib spalling in gangue-bearing coal seams. Environ Sci Pollut Res Int 30:38713–38727. https://doi.org/10.1007/s11356-022-25033-x
Li L, Khraishi T, Shen Y (2023) Investigation of the effect of indentation spacing, edge distance and specimen thickness on the measurement of hardness. J Mech Sci Technol 37:687–696. https://doi.org/10.1007/s12206-023-0112-7
Liu X, Wang L, Kong X et al (2022) Role of pore irregularity in methane desorption capacity of coking coal. Fuel 314:123037. https://doi.org/10.1016/j.fuel.2021.123037
Liu Y, Yang C, Wang J, Xiong Y, Peng P (2023) Rheology of coal at particle level characterized by nanoindentation. Nat Resour Res 32:1359–1380. https://doi.org/10.1007/s11053-023-10188-2
Ma Z, Pathegama Gamage R, Zhang C (2020) Application of nanoindentation technology in rocks: a review. Geomech Geophys Geo Energy Ge Resour 6. https://doi.org/10.1007/s40948-020-00178-6
Manjunath G, Jha B (2019) Nanoscale fracture mechanics of gondwana coal. Int J Coal Geol 204:102–112. https://doi.org/10.1016/j.coal.2019.02.007
Meng J, Lyu C, Wang J et al (2023) Mechanical properties and failure mechanisms of different rank coals at the nanoscale. Fuel 345:128209. https://doi.org/10.1016/j.fuel.2023.128209
Miller M, Bobko C, Vandamme M, Ulm F (2008) Surface roughness criteria for cement paste nanoindentation. Cem Concr Res 38:467–476. https://doi.org/10.1016/j.cemconres.2007.11.014
Oliver W, Pharr G (1992) An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J Mater Res 7:1564–1583. https://doi.org/10.1557/JMR.1992.1564
Ou X, Ouyang L, Xu X, Wang L (2022) Case study on floor heave failure of highway tunnels in gently inclined coal seam. Eng Fail Anal 136:106224. https://doi.org/10.1016/j.engfailanal.2022.106224
Phani P, Hackett B, Walker C, Oliver W, Pharr G (2023) High strain rate nanoindentation testing: recent advancements, challenges and opportunities. Curr Opin Solid State Mater Sci 27:101054. https://doi.org/10.1016/j.cossms.2022.101054
Qin B, Shi Z, Hao J, Ye D, Liang B, Sun W (2022) Analysis of the space–time synergy of coal and gas co-mining. ACS Omega 7:13737–13749. https://doi.org/10.1021/acsomega.2c00034
Różański A, Różańska A, Sobótka M, Pachnicz M, Bukowska M (2021) Identification of changes in mechanical properties of sandstone subjected to high temperature: meso-and micro-scale testing and analysis. Arch Civ Mech Eng 21. https://doi.org/10.1007/s43452-021-00187-6
Shi X, Jiang S, Wang Z, Bai B, Xiao D, Tang M (2020) Application of nanoindentation technology for characterizing the mechanical properties of shale before and after supercritical co2 fluid treatment. J Co2 Util 37:158–172. https://doi.org/10.1016/j.jcou.2019.11.022
Song B, Zhai X, Ma T, Wang B, Hao L, Zhou Y (2023) Effect of water immersion on pore structure of bituminous coal with different metamorphic degrees. Energy 274:127449. https://doi.org/10.1016/j.energy.2023.127449
Sun C, Li G, Zhang S, Xu J, Yang H (2020) Mechanical and heterogeneous properties of coal and rock quantified and mapped at the microscale. Appl Sci 10:342. https://doi.org/10.3390/app10010342
Tu Q, Cheng Y, Ting R, Wang Z, Jia L, Lei Y (2019) Role of tectonic coal in coal and gas outburst behavior during coal mining. Rock Mech Rock Eng 52:4619–4635. https://doi.org/10.1007/s00603-019-01846-0
Wang Z, Cheng Y, Wang L, Wang C, Lei Y, Jiang Z (2020) Analysis of pulverized tectonic coal gas expansion energy in underground mines and its influence on the environment. Environ Sci Pollut Res Int 27:1508–1520. https://doi.org/10.1007/s11356-019-06757-9
Wang S, Li X, Qin Q (2022) Study on surrounding rock control and support stability of ultra-large height mining face. Energies 15:6811. https://doi.org/10.3390/en15186811
Xu J, Tang X, Wang Z, Feng Y, Bian K (2020) Investigating the softening of weak interlayers during landslides using nanoindentation experiments and simulations. Eng Geol 277:105801. https://doi.org/10.1016/j.enggeo.2020.105801
Xue Y, Liu J, Ranjith P, Gao F, Xie H, Wang J (2022) Changes in microstructure and mechanical properties of low-permeability coal induced by pulsating nitrogen fatigue fracturing tests. Rock Mech Rock Eng 55:7469–7488. https://doi.org/10.1007/s00603-022-03031-2
Yang L, Xu J, Fang J, Cao Z, Li T, Song H (2020) Risk evaluation of groundwater leakage in coal seam goaf: a case study in the Lingxin mining area. Environ Sci Pollut Res Int 27:26066–26078. https://doi.org/10.1007/s11356-020-08995-8
Yu H, Zhang Y, Lebedev M et al (2018) Nanoscale geomechanical properties of western Australian coal. J Pet Sci Eng 162:736–746. https://doi.org/10.1016/j.petrol.2017.11.001
Zeng Q, Wu Y, Liu Y, Zhang G (2019) Determining the micro-fracture properties of Antrim gas shale by an improved micro-indentation method. J Nat Gas Sci Eng 62:224–235. https://doi.org/10.1016/j.jngse.2018.12.013
Zhang X, Li X, Gao X (2016) Hydrochemistry and coal mining activity induced karst water quality degradation in the Niangziguan karst water system, China. Environ Sci Pollut Res Int 23:6286–6299. https://doi.org/10.1007/s11356-015-5838-z
Zhang Y, Lebedev M, Al-Yaseri A et al (2018) Nanoscale rock mechanical property changes in heterogeneous coal after water adsorption. Fuel 218:23–32. https://doi.org/10.1016/j.fuel.2018.01.006
Zhang G, Ranjith P, Lyu Q (2022) Direct evidence of CO2 softening effects on coal using nanoindentation. Energy 254:124221. https://doi.org/10.1016/j.energy.2022.124221
Zhang S, Sun L, Qin B, Wang H, Qi G (2022) Characteristics and main factors of foam flow in broken rock mass in coal mine goaf. Environ Sci Pollut Res Int 29:47095–47108. https://doi.org/10.1007/s11356-022-19208-9
Zhao J, Huang P, Xu KW, Wang F, Lu TJ (2018) Indentation size and loading strain rate dependent creep deformation of nanocrystalline mo. Thin Solid Films 653:365–370. https://doi.org/10.1016/j.tsf.2018.03.068
Zhong S, Lin D (2022) Evaluation of the coordination degree of coal and gas co-mining system based on system dynamics. Sustainability 14:16434. https://doi.org/10.3390/su142416434
Zhu Y, Li C, Li L, Yang K, Yang Y, Zhang G (2023) Dynamic assessment and system dynamics simulation of safety risk in whole life cycle of coal mine. Environ Sci Pollut Res Int 30:64154–64167. https://doi.org/10.1007/s11356-023-26958-7
Funding
This work was supported by the National Natural Science Foundation of China (52204206, 52274173) and the Open Fund Project Funded by State Key Laboratory of Mining Response and Disaster Prevention and Control in Deep Coal Mines (Grant No. SKLMRDPC21KF12).
Author information
Authors and Affiliations
Contributions
Baisheng Nie proposed the topic. Hengyi He wrote the manuscript. Peng Liu carried out the visualization and paper editing. Xianfeng Liu carried out visualization. Bozhi Deng carried out the review analysis. Yulong Zhao edited the manuscript. Hao Zhang contributed to the interpretation of the results. Mingwei Cao edited the manuscript.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Philippe Garrigues
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Nie, B., He, H., Liu, P. et al. Nanomechanical behavior of coal with heterogeneous minerals and pores using nanoindentation. Environ Sci Pollut Res 31, 28007–28024 (2024). https://doi.org/10.1007/s11356-024-32952-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-024-32952-4