Abstract
A procedure has been developed for estimation of elastic moduli and microhardness of elements composing heterogeneous materials, including coal and rocks. The procedure is based on the joint application of continuous nanoindentation and optical microscopy. The article gives an example of the procedure application in terms of two different coal samples.
Similar content being viewed by others
References
Khrushchev, M.M. and Berkovich, E.S., Mikrotverdost’ opredelyaemaya metodom vdavlivaniya (Determination of Microhardness by Indentation), Moscow: AN SSSR, 1943.
Mott, B.A., Micro-Indentation Hardness Testing, London: Butterworths, 1956.
GOST 21206-75, Moscow: Gostandart SSSR, 1975.
Musyal, S.A., Microhardness and Microbrittleness as Possible Classification Parameters of Fossil Coals, Petrograficheskie osobennosti i svoistva uglei (Petrographic Peculiarities and Properties of Coals), Moscow: AN SSSR, 1963.
Hower, J., Trinkle, E.J., and Raione, R.P., Vickers Microhardness of Telovitrinite and Pseudovitrinite from High Nolatile Bituminous Kentucky Coals, Int. J. Coal Geology., 2008, vol. 75.
Epshtein, S.A., Barabanova, O.V., Minaev, V.I., Veber, Zh., and Shirochin, D.L., Effect of Di-Methyl- Formamide Treatment of Coals on Their Thermal Destruction and Elastic–Plastic Properties, Khim. Tverd. Tela., 2007, no. 4.
Das, B., Effect of Load on Vickers Indentation Hardness of Coals, Int. J. Rock Mech. Min. Sci., 1972, vol. 9.
Epshtein, S.A., Physico-Mechanical Properties of Different-Genotype Coal Vitrinite, GIAB., 2009, no. 8.
Kožušníková, A., Determination of Microhardness and Elastic Modulus of Coal Components by Using Indentation Method, GeoLines., 2009, vol. 22.
Kalei, G.N., Data on Microhardness Tests by Indent Depth, Mashinovedenie., 1968, no. 3.
Bulychev, S.I., Alekhin, V.P., Shorokhov, M. Kh., Ternovsky, A.P., and Shyrev, G.D., Determination of Young’s modulus from Indentation Diagram, Zavod. Labor., 1975, no. 9.
Bull, S.J., Nanoindentation of Coatings, J. Phys. D: Appl. Phys., 2005, vol. 38.
Borodich, F. M., The Hertz-Type and Adhesive Contact Problems for Depth-Sensing Indentation, Advances in Applied Mechanics., 2014, vol. 47.
Nemat-Nasser, S. and Hori, M., Micromechanics: Overall Properties of Heterogeneous Materials, London: North-Holland, 1994.
Iofis, M.A. and Shmelev, A.I., Inzhenernaya geomekhanika pri podzemnykh razrabotkakh (Engineering Geomechanics in Underground Mining), Moscow: Nedra, 1985.
Velez, K., Maximilien, S., Damidot, D., Fantozzi, G., and Sorrentino, F., Determination by Nanoindentation of Elastic Modulus and Hardness of Pure Constituents of Portland Cement Clinker, Cement and Concrete Research., 2001, vol. 31.
Constantinides, G., Ulm, F.J., and Van Vliet, K., On the Use of Nanoindentation for Cementitious Materials, Materials and Structures., 2003, vol. 36.
Zhu, W., Hughes, J.J., Bicanic, N., and Pearce C.J., Nanoindentation Mapping of Mechanical Properties of Cement Paste and Natural Rocks, Materials Characterization., 2007, vol. 58.
Ban, H., Karki, P., and Kim, Y., Nanoindentation Test Integrated with Numerical Simulation to Characterize Mechanical Properties of Rock Materials, J. Testing and Evaluation., 2014, vol. 42.
Menčík, J., Munz, D., Quandt, E., Weppelmann, E.R., and Swain, M.V. Determination of Elastic Modulus of Thin Layers Using Nanoindentation, J. Materials Res., 1997, vol. 12.
Author information
Authors and Affiliations
Corresponding author
Additional information
Original Russian Text © F.M. Borodich, S.J. Bull, S.A. Epshtein, 2015, published in Fiziko-Tekhnicheskie Problemy Razrabotki Poleznykh Iskopaemykh, 2015, No. 3, pp. 57–63.
Rights and permissions
About this article
Cite this article
Borodich, F.M., Bull, S.J. & Epshtein, S.A. Nanoindentation in studying mechanical properties of heterogeneous materials. J Min Sci 51, 470–476 (2015). https://doi.org/10.1134/S1062739115030072
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1062739115030072