1. Superior performance area changing capacitive MEMS accelerometer employing additional lateral springs for low frequency applications

   • Kannan Solai
   • Joseph Daniel Rathnasami
   • Sumangala Koilmani

   Technical Paper 12 February 2020 Pages: 2353 - 2370

   

2. Design and sensitivity analysis of capacitive MEMS pressure sensor for blood pressure measurement

   • K. Srinivasa Rao
   • W. Samyuktha
   • Koushik Guha

   Technical Paper 14 March 2020 Pages: 2371 - 2379

   

3. Design and of analysis of SPDT Ohmic RF MEMS switch

   • K. Srinivasa Rao
   • K. Vasantha
   • K. Girija Sravani

   Technical Paper 03 March 2020 Pages: 2381 - 2387

   

4. On the mechanical behavior of a wide tunable capacitive MEMS resonator for low frequency energy harvesting applications

   • Salar Ghasemi
   • Saeid Afrang
   • Behzad Sotoudeh

   Technical Paper 14 February 2020 Pages: 2389 - 2398

   

5. A UHF CPW-fed patch antenna for nanosatellite store and forward mission

   • Md. Amanath Ullah
   • Touhidul Alam
   • Mohammad Tariqul Islam

   Technical Paper 13 February 2020 Pages: 2399 - 2405

   

6. A new Tapered-L shaped springs based MEMS piezoelectric vibration energy harvester designed for small rolling bearing fault detection

   • Bapi Debnath
   • R. Kumar

   Technical Paper 20 February 2020 Pages: 2407 - 2422

   

7. Experimental and numerical study on HDPE/SWCNT nanocomposite elastic properties considering the processing techniques effect

   • R. T. Tebeta
   • A. M. Fattahi
   • N. A. Ahmed

   Technical Paper 21 February 2020 Pages: 2423 - 2441

   

8. Vulnerability assessment of a power transmission network employing complex network theory in a resilience framework

   • Dipanjan Bose
   • Chandan Kumar Chanda
   • Abhijit Chakrabarti

   Technical Paper 21 February 2020 Pages: 2443 - 2451

   

9. Analytical analysis of a circular unimorph piezoelectric actuator in the range of low voltages and pressures

   • Hamid Asadi Dereshgi
   • Huseyin Dal
   • Mehmet Emin Sayan

   Technical Paper 28 February 2020 Pages: 2453 - 2464

   

10. Design and development of an efficient fluid mixing for 3D printed lab-on-a-chip

    • Anurag Agarwal
    • Asif Salahuddin
    • Mohammed Jalal Ahamed

    Technical Paper 06 March 2020 Pages: 2465 - 2477

    

11. Fabrication process for very-low frequency operation of guided two-beam piezoelectric energy harvester

    • Shanky Saxena
    • Ritu Sharma
    • B. D. Pant

    Technical Paper 21 February 2020 Pages: 2479 - 2486

    

12. A powerless iron oxide based magnetometer

    • Tyler Coughlin
    • Reza Rashidi

    Technical Paper 22 February 2020 Pages: 2487 - 2498

    

13. Ferrofluid transformer-based tilt sensor

    • Allison DeGraff
    • Reza Rashidi

    Technical Paper 21 February 2020 Pages: 2499 - 2506

    

14. Analysis of a three-phase to seven-phase transformer under unbalanced input

    • Md Tabrez
    • Pradip Kumar Sadhu
    • Farhad I. Bakhsh

    Technical Paper 09 March 2020 Pages: 2507 - 2516

    

15. Significance of Arrhenius activation energy in flow and heat transfer of tangent hyperbolic fluid with zero mass flux condition

    • K. Ganesh Kumar
    • Abeer Baslem
    • S. Nadeem

    Technical Paper 28 February 2020 Pages: 2517 - 2526

    

16. MEMS multi-vibrating ring gyroscope for space applications

    • Waqas Amin Gill
    • Dima Ali
    • Daniel S. Choi

    Technical Paper 02 March 2020 Pages: 2527 - 2533

    

17. Thermo-mechanical vibration of FG curved nanobeam containing porosities and reinforced by graphene platelets

    • Xianfeng Yang
    • Hu Liu
    • Jingxuan Ma

    Technical Paper 28 March 2020 Pages: 2535 - 2551

    

18. Design and simulation of capacitive SPDT RF MEMS switch to improve its isolation

    • K. Srinivasa Rao
    • K. Vasantha
    • K. Girija Sravani

    Technical Paper 06 March 2020 Pages: 2553 - 2560

    

19. Development of a novel low-temperature differential hollow roller using an ultra-thin heating element of graphene polymeric composite material

    • Kun-Cheng Ke
    • Li-Jian Lin
    • Sen-Yeu Yang

    Technical Paper 05 March 2020 Pages: 2561 - 2567

    

20. Design and simulation of RF MEMS shunt capacitive switch with non-uniform meanders for C-band applications

    • K. Girija Sravani
    • D. Kali Naga Mallika
    • K. Srinivasa Rao

    Technical Paper 16 March 2020 Pages: 2569 - 2574

    

21. Optimization of injection-molding processing conditions for plastic double-convex Fresnel lens using grey-based Taguchi method

    • Chao-Ming Lin
    • Wei-Cheng Chen

    Technical Paper 04 March 2020 Pages: 2575 - 2588

    

22. Surrogate models for uncertainty analysis of micro-actuator

    • Fatma Abid
    • Khalil Dammak
    • Mohamed Haddar

    Technical Paper 13 March 2020 Pages: 2589 - 2600

    

23. Hydrodynamic mobility of a porous spherical particle with variable permeability in a spherical cavity

    • Jai Prakash

    Technical Paper 11 March 2020 Pages: 2601 - 2614

    

24. Instability analysis of bi-axial micro-scanner under electromagnetic actuation including small scale and damping effects

    • Ruhollah Atabak
    • Hamid M. Sedighi
    • Erfan Mirshekari

    Technical Paper 10 March 2020 Pages: 2615 - 2638

    

25. A class of biaxial micro/meso-scale structures for isotropic in-plane inertial sensing and actuation: design, fabrication and experiments

    • Xiaowei Shan
    • Jorge Angeles
    • James Richard Forbes

    Technical Paper 13 March 2020 Pages: 2639 - 2648

    

26. Correction to: A class of biaxial micro/meso-scale structures for isotropic in-plane inertial sensing and actuation: design, fabrication and experiments

    • Xiaowei Shan
    • Jorge Angeles
    • James Richard Forbes

    Correction 18 April 2020 Pages: 2649 - 2649

27. High performance wide response GaAs based photo detector with nano texture on nanopillar arrays structure

    • Smriti Baruah
    • Joyatri Bora
    • Santanu Maity

    Technical Paper 10 March 2020 Pages: 2651 - 2660

    

28. Axial vibration analysis of a Rayleigh nanorod with deformable boundaries

    • Mustafa Özgür Yayli

    Technical Paper 14 March 2020 Pages: 2661 - 2671

    

29. Performance of three phase AI controller based UPQC to enhance power quality of hybrid RES

    • CH. Siva Kumar
    • G. Mallesham

    Technical Paper 04 April 2020 Pages: 2673 - 2682

    

30. Magnetic field distribution of magnetic encoder with TMR sensor using finite element analysis

    • Yirga Belay Muna
    • Cheng-Chien Kuo

    Technical Paper 14 March 2020 Pages: 2683 - 2701

    

31. Double-sided bowtie antenna array for Ku/K band applications and performance study of controlling ground plane

    • Md. Rabiul Hasan
    • Carlene Goodbody
    • Tutku Karacolak

    Technical Paper 17 March 2020 Pages: 2703 - 2713

    

32. Design and modeling of a novel electromechanical optical micro-scanner

    • Ruoyu Tan
    • Shixun Fan
    • Dapeng Fan

    Technical Paper 11 April 2020 Pages: 2715 - 2728

    

33. Friction embossing

    • W. Zou
    • W. K. Schomburg

    Technical Paper Open access 30 March 2020 Pages: 2729 - 2737

    

34. Development of a low stress RF MEMS double-cantilever shunt capacitive switch

    • Hamid Reza Ansari
    • Zoheir Kordrostami

    Technical Paper 16 April 2020 Pages: 2739 - 2748

    

35. Comment on the paper "Microsystem Technologies (2018) 24:4965–4979”

    • Asterios Pantokratoras

    Comment 23 March 2020 Pages: 2749 - 2749