1. Integrating the digital twin concept into the evaluation of reconfigurable manufacturing systems (RMS): literature review and research trend

   • Jesus Kombaya Touckia

   Critical Review 07 March 2023 Pages: 875 - 889

   

2. Challenges and recent progress on the application of rapid sand casting for part production: a review

   • Samson Dare Oguntuyi
   • Kasongo Nyembwe
   • Tajudeen Mojisola

   Critical Review Open access 09 March 2023 Pages: 891 - 906

   

3. A novel method for flute grinding of conical end milling cutter

   • Gaojun Zheng
   • Caixu Yue
   • Hongyang Wang

   ORIGINAL ARTICLE 17 February 2023 Pages: 907 - 917

   

4. High-efficient fabrication of infrared optics with uniform microstructures by a semi-ductile diamond milling approach

   • Peizheng Li
   • Sujuan Wang
   • Shijun Xu

   ORIGINAL ARTICLE 04 March 2023 Pages: 919 - 934

   

5. A machine learning model for flank wear prediction in face milling of Inconel 718

   • Tiyamike Banda
   • Yu-chen Liu
   • Chin Seong Lim

   ORIGINAL ARTICLE 04 March 2023 Pages: 935 - 945

   

6. Modelling and application of hierarchical joint optimisation for modular product family and supply chain architecture

   • Md. Sanowar Hossain
   • Ripon K. Chakrabortty
   • Michael J. Ryan

   ORIGINAL ARTICLE 04 March 2023 Pages: 947 - 971

   

7. A model reconstruction strategy with geometric parameters adjustment function for repairing damaged blade

   • Jianing Dang
   • Baohai Wu
   • Limin Gao

   ORIGINAL ARTICLE 06 March 2023 Pages: 973 - 989

   

8. Behavior and damage of the near-surface layer of parts pre-machined by the EDM process

   • Adnene Tlili
   • Farhat Ghanem
   • Chedly Braham

   ORIGINAL ARTICLE 06 March 2023 Pages: 991 - 1003

   

9. Information system-theoretic view on the architecture of smart manufacturing systems: a case study in the Democratic People’s Republic of Korea

   • Song-Chol Kim
   • Il-Chol Jong
   • Jong-Chol Kim

   ORIGINAL ARTICLE 06 March 2023 Pages: 1005 - 1023

   

10. Predicting axial force in friction stir welding thick 2219 aluminum alloy plate

    • Le Teng
    • Xiaohong Lu
    • Shixuan Sun

    ORIGINAL ARTICLE 06 March 2023 Pages: 1025 - 1034

    

11. Design of a novel 2D ultrasonic transducer for 2D high-frequency vibration–assisted micro-machining

    • Vinod Satpute
    • Dehong Huo
    • Mohammed Elgendy

    ORIGINAL ARTICLE Open access 06 March 2023 Pages: 1035 - 1053

    

12. Spiral growth selective laser melting of axisymmetric objects from Cu-Ni–Sn alloy powder: a mass rate efficiency and physical properties study

    • Jorge Andrés Ramos-Grez
    • Javier Vera-Hoffmann
    • Magdalena Walczak

    ORIGINAL ARTICLE 06 March 2023 Pages: 1055 - 1066

    

13. Optimization of material extrusion additive manufacturing process parameters for polyether ketone ketone (PEKK)

    • Kaifur Rashed
    • Abdullah Kafi
    • Stuart Bateman

    ORIGINAL ARTICLE 07 March 2023 Pages: 1067 - 1091

    

14. FDD: a deep learning–based steel defect detectors

    • Fityanul Akhyar
    • Ying Liu
    • Chih-Yang Lin

    ORIGINAL ARTICLE 07 March 2023 Pages: 1093 - 1107

    

15. Efficient compensation method of 5-axis machine tools based on a novel representation of the volumetric error

    • Hongdong Cong
    • Jun Zha
    • Yaolong Chen

    ORIGINAL ARTICLE 07 March 2023 Pages: 1109 - 1119

    

16. Detection of tool wear during machining by designing a novel 12-way 2-shot learning model by applying L2-regularization and image augmentation

    • Jawad Mahmood
    • Muhammad Adil Raja
    • Sadaf Zahoor

    ORIGINAL ARTICLE 08 March 2023 Pages: 1121 - 1142

    

17. A new control parameter to predict micro-warping-induced job failure in LPBF of TI6AL4V titanium alloy

    • Gianluca Buffa
    • Antonio Costa
    • Livan Fratini

    ORIGINAL ARTICLE Open access 08 March 2023 Pages: 1143 - 1157

    

18. Information-rich quality controls prediction model based on non-destructive analysis for porosity determination of AISI H13 produced by electron beam melting

    • Cristian Ghibaudo
    • Giacomo Maculotti
    • Daniele Ugues

    ORIGINAL ARTICLE Open access 08 March 2023 Pages: 1159 - 1173

    

19. Generation of rule-adhering robot programs for aluminium welding automatically from CAD

    • Tuan Anh Tran
    • Eirik Bjørndal Njåstad
    • Andrei Lobov

    ORIGINAL ARTICLE Open access 08 March 2023 Pages: 1175 - 1187

    

20. Enhancing the interfacial bonding strength between 3D-printed aluminium substrates and carbon fibre–reinforced polymers

    • Hamed Abdoli
    • Yuk Lun Chan
    • Simon Bickerton

    ORIGINAL ARTICLE Open access 08 March 2023 Pages: 1189 - 1197

    

21. Post-process drilling of AlSi10Mg parts by laser powder bed fusion

    • Alpay Tamer Ertürk
    • Eser Yarar
    • Mustafa Enes Bulduk

    ORIGINAL ARTICLE 08 March 2023 Pages: 1199 - 1212

    

22. Manual assembly and Human–Robot Collaboration in repetitive assembly processes: a structured comparison based on human-centered performances

    • Riccardo Gervasi
    • Matteo Capponi
    • Fiorenzo Franceschini

    ORIGINAL ARTICLE Open access 08 March 2023 Pages: 1213 - 1231

    

23. Compressive response versus power consumption of acrylonitrile butadiene styrene in material extrusion additive manufacturing: the impact of seven critical control parameters

    • Markos Petousis
    • Nectarios Vidakis
    • Amalia Moutsopoulou

    ORIGINAL ARTICLE Open access 08 March 2023 Pages: 1233 - 1245

    

24. Experimental and numerical investigation of residual stresses in proximity girth welds

    • Sachin Bhardwaj
    • Sigmund Kyrre Aas
    • R. M. Chandima Ratnayake

    ORIGINAL ARTICLE Open access 09 March 2023 Pages: 1247 - 1259

    

25. Intelligent layout optimization of reconfigurable flexible fixture for assembling multiple aircraft panels

    • Shuang Meng
    • Lianyu Zheng
    • Jian Zhou

    ORIGINAL ARTICLE 09 March 2023 Pages: 1261 - 1278

    

26. Experimental analysis on the influence of the tool micro geometry on the wear behavior in gear hobbing

    • Felix Kühn
    • Steffen Hendricks
    • Thomas Bergs

    ORIGINAL ARTICLE Open access 09 March 2023 Pages: 1279 - 1292

    

27. Selection of materials in metal additive manufacturing via three-way decision-making

    • Yuchu Qin
    • Qunfen Qi
    • Xiangqian Jiang

    ORIGINAL ARTICLE Open access 10 March 2023 Pages: 1293 - 1302

    

28. Tool wear assessment and life prediction model based on image processing and deep learning

    • Cheng Wu
    • Shenlong Wang

    ORIGINAL ARTICLE 10 March 2023 Pages: 1303 - 1315

    

29. Effect of spiral welding path and laser power on weld in laser welding of aluminum tab for lithium-ion battery

    • Joong-Han Shin
    • Hyeong-Chang Noh
    • Go-Dong Park

    ORIGINAL ARTICLE 10 March 2023 Pages: 1317 - 1327

    

30. Numerical simulation research on welded residual stress and distortion of aero-engine afterburner lobe mixer with different welding sequences

    • Hongxi Jin
    • Zhenlin Chen
    • Jicheng Chen

    ORIGINAL ARTICLE 10 March 2023 Pages: 1329 - 1346

    

31. Predictive model of surface roughness in milling of 7075Al based on chatter stability analysis and back propagation neural network

    • Long Bai
    • Xin Cheng
    • Jianfeng Xu

    ORIGINAL ARTICLE 10 March 2023 Pages: 1347 - 1361

    

32. Optimization of manufacturing parameters for Fe–25Cr–13Co magnetic alloy by using Taguchi technique

    • Ali Haider
    • Syed Husain Imran Jaffery
    • Najam Ulqadir

    ORIGINAL ARTICLE 10 March 2023 Pages: 1363 - 1378

    

33. A geometric error measurement method for five-axis ultra-precision machine tools

    • Luqi Song
    • Xueshen Zhao
    • Tao Sun

    ORIGINAL ARTICLE 10 March 2023 Pages: 1379 - 1395

    

34. Ladle pouring process parameter and quality estimation using Mask R-CNN and contrast-limited adaptive histogram equalisation

    • Callum O’Donovan
    • Ivan Popov
    • Cinzia Giannetti

    ORIGINAL ARTICLE Open access 11 March 2023 Pages: 1397 - 1416

    

35. FE simulation, analytical prediction, and experimentation of cutting force in longitudinal vibration-assisted milling (LVAM) during Ti-6Al-4 V cutting

    • Rendi Kurniawan
    • Tae Jo Ko
    • Saood Ali

    ORIGINAL ARTICLE 11 March 2023 Pages: 1417 - 1451

    

36. Creep-feed grinding of single crystal nickel-base turbine blade fir-tree roots: tool wear, grinding force, temperature, and surface integrity

    • Qing Miao
    • Mengbin Lu
    • Ming Zhang

    ORIGINAL ARTICLE 11 March 2023 Pages: 1453 - 1470

    

37. Additive manufacturing of recycled plastics: a ‘techno-eco-efficiency’ assessment

    • Heshan Jayawardane
    • Ian J. Davies
    • Wahidul K. Biswas

    ORIGINAL ARTICLE Open access 11 March 2023 Pages: 1471 - 1496

    

38. Forming analysis of T2 copper foil processed by submerged water jet cavitation

    • Chao Yu
    • Peiyu He
    • Retao Li

    ORIGINAL ARTICLE 11 March 2023 Pages: 1497 - 1508

    

39. Local tool path smoothing based on symmetrical NURBS transition curve with look ahead optimal method: experimental and analytical study

    • Chunlin Lei
    • Yusoff Nukman
    • Mingbing Luo

    ORIGINAL ARTICLE 13 March 2023 Pages: 1509 - 1526

    

40. Adjustment of the geometries of the cutting front and the kerf by means of beam shaping to maximize the speed of laser cutting

    • Jannik Lind
    • Christian Hagenlocher
    • Thomas Graf

    ORIGINAL ARTICLE Open access 13 March 2023 Pages: 1527 - 1538

    

41. Interface characterization and formation mechanism of Al/Ti dissimilar joints of refill friction stir spot welding

    • Xinchen Nan
    • Hongyun Zhao
    • Xiaoguo Song

    ORIGINAL ARTICLE 13 March 2023 Pages: 1539 - 1551

    

42. On the predictive modeling of surface micro-topography in vibratory polishing of aeronautic gear considering initial workpiece topography

    • Wen Shao
    • Yihui Hou
    • Zhengmingqing Li

    ORIGINAL ARTICLE 13 March 2023 Pages: 1553 - 1565

    

43. A rapid identification method for angular positioning error of rotary axes for machine tools with 5 axes based on a double ball-bar

    • Anling Jiao
    • Guangsheng Chen

    ORIGINAL ARTICLE 13 March 2023 Pages: 1567 - 1575

    

44. A machine learning method for cutting parameter selection in rotary ultrasonic-assisted end grinding

    • Mohammad Reza Chalak Qazani
    • Saeid Amini
    • Adeel H. Suhail

    ORIGINAL ARTICLE 13 March 2023 Pages: 1577 - 1591

    

45. Creep anisotropy reduction and improvement via post-heat treatment in yttrium-added Hastelloy-X fabricated by laser powder bed fusion

    • Santhosh Banoth
    • Thaviti Naidu Palleda
    • Koji Kakehi

    ORIGINAL ARTICLE 13 March 2023 Pages: 1593 - 1609

    

46. Structure optimization of electromagnetic clinching die based on response surface methodology and particle swarm optimization algorithm

    • Yanan Ji
    • Changqing Huang
    • Xiaohui Cui

    ORIGINAL ARTICLE 13 March 2023 Pages: 1611 - 1628

    

47. Impact of nozzle temperature on dimensional and mechanical characteristics of low-density PLA

    • Fernando de Freitas
    • Hélio Pegado

    ORIGINAL ARTICLE 14 March 2023 Pages: 1629 - 1638

    

48. Influence of the deformation temperature on the formability of AA5083 during electromagnetic forming

    • Pengxin Dong
    • Jiawei Wu
    • Xiaotao Han

    ORIGINAL ARTICLE 14 March 2023 Pages: 1639 - 1655

    

49. Formability and microstructure analysis of TiBw/TA15 composites sheet with superplastic tensile and gas bulging tests

    • Jianhang Qian
    • Gang Liu
    • Xiaotong Liu

    ORIGINAL ARTICLE 14 March 2023 Pages: 1657 - 1668

    

50. On machining K417 superalloy with sliding self-propelled rotary tools: simulation and experimental investigation

    • Wenbo He
    • Zhongling Xue
    • Ni Chen

    ORIGINAL ARTICLE 14 March 2023 Pages: 1669 - 1680