Abstract
In this work we have investigated the effects of production processes on the structural and mechanical properties of B4C reinforced/unreinforced foamable aluminium composite materials. All samples were produced with the powder metallurgy method. The production method included compression, extrusion and rolling processes. The Vickers microhardness test was applied to determine the mechanical properties of the samples. Vickers microhardness, elastic modulus and yield strength values of the samples were separately calculated and compared with each other. The experimental microhardness results were analysed using Meyer’s law, the proportional sample resistance model, the elastic–plastic deformation model and the Hays Kendall (HK) approach. The results determined that the HK approach was the most suitable model among the other applied microhardness models.
Similar content being viewed by others
References
Banhart J, JOM-J Min Met Mater Soc 52 (2000) 22.
Hangai Y, and Utsunomıya T, Metall Mater Trans A 40 (2009) 275.
Kitazono K, Kikuchi Y, Sato E, and Kuribayashi K, Mater Lett 61 (2007) 1771.
Gergely V, and Clyne B, Adv Eng Mater 2 (2000) 175.
Li N, Xing S, Bao P, and Liu Z, A research on fabrication of aluminum foam precursor using semi-solid melt, Proc. 2nd International Conference on Mechanical and Electronics Engineering (ICMEE 2010), Kyoto, Japan, August 2010, p 49.
Banhart J, Prog Mater Sci 46 (2001) 559.
Banhart J, MRS Bull 28 (2003) 290.
Baumgärtner F, Duarte I, and Banhart J, Adv Eng Mater 2 (2000) 168.
Degischer H P, and Krıszt B, Handbook of Cellular Metals: Production, Processing and Applications, Weinheim, Wiley (2002), p 1.
Young S W, and Kang C G, Metall Mater Trans B 35B (2004) 769.
Asavavisithchai S, and Opa A, Chiang Mai J Sci 37 (2010) 213.
Gokmen U, and Turker M, J Fac Eng Archit Gazi Univ 27 (2012) 651.
Güden M, and Yüksel S, J Mater Sci 41 (2006) 4075.
Kennedy A R, and Asavavisitchai S, Adv Eng Mater 6 (2004) 400.
Kennedy A R, and Asavavisitchai S, Scri Mater 50 (2004) 115.
Uzun A, and Turker M, Int J Mater Res 106 (2015) 970.
Varol T, and Canakci A, Met Mater Int 19 (2013) 1227.
Hafizpour H R, Simchi A, and Parvizi S, Adv Powder Technol 21 (2010) 273.
Chen H S, Wang W X, Nie H H, Li, Y L, Wu Q C, and Zhang P, Acta Metall Sin (Engl Lett) 28 (2015) 1214.
Abdullah Y, Yusof M R, Muhammad A, Kamarudin N, Paulus W S, Shamsudin R, Shudin N H, and Zali N M, J Nucl Relat Technol 9 (2012) 42.
Li H, and Bradt R C, J Mater Sci 28 (1993) 917.
Bull S J, Page T F, and Yoffe E H, Philos Mag Lett 59 (1989) 281.
Quinn J B, and Quinn G D, J Mater Sci 32 (1997) 4331.
Ozturk O, Cetinkara H A, Asıkuzun E, Akdogan M, Yilmazlar M, and Terzioglu C, J Mater Sci Mater Electron 22 (2011) 1501.
Asikuzun E, Ozturk O, Cetinkara H A, Yildirim G, Varilci A, Yılmazlar M, and Terzioglu C, J Mater Sci Mater Electron 23 (2012) 1001.
Tosun M, Ataoglu S, Arda L, Ozturk O, Asikuzun E, Akcan D, and Cakiroglu O, Mater Sci Eng A Struct 590 (2014) 416.
Upit G P, and Varchenya S A, Phys Status Solidi B 17 (1966) 831.
Hays C, and Kendall E G, Metallography 6 (1973) 275.
Acknowledgements
This study was funded by the Kastamonu University, Scientific Research Projects Coordination Department, Kastamonu, Turkey (Project Number: KÜBAP-01/2014-11).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Uzun, A., Asikuzun, E., Gokmen, U. et al. Vickers Microhardness Studies on B4C Reinforced/Unreinforced Foamable Aluminium Composites. Trans Indian Inst Met 71, 327–337 (2018). https://doi.org/10.1007/s12666-017-1163-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12666-017-1163-1