1. Field decrystallization and structural modifications of highly doped silicon in a 2.45-GHz microwave single-mode cavity

   • Ramesh Peelamedu
   • Rustum Roy
   • William Drawl

   Rapid Communications 01 June 2004 Pages: 1599 - 1602

2. Predicted pyrochlore to fluorite disorder temperature for A₂Zr₂O₇ compositions

   • M. J. D. Rushton
   • Robin W. Grimes
   • Scott Owens

   Rapid Communications 01 June 2004 Pages: 1603 - 1604

3. Energy dissipated during spherical indentation

   • Jürgen Malzbender

   Rapid Communications 01 June 2004 Pages: 1605 - 1607

4. The microstructure of Sn in near-eutectic Sn–Ag–Cu alloy solder joints and its role in thermomechanical fatigue

   • Donald W. Henderson
   • James J. Woods
   • Karl J. Puttlitz

   Articles 01 June 2004 Pages: 1608 - 1612

5. The effect of composition on the growth and morphology of zeolite A in solution

   • Bovornlak Oonkhanond
   • Michael E. Mullins

   Articles 01 June 2004 Pages: 1613 - 1622

6. Grain refinement at the nanoscale via mechanical twinning and dislocation interaction in a nickel-based alloy

   • N. R. Tao
   • X. L. Wu
   • K. Lu

   Articles 01 June 2004 Pages: 1623 - 1629

7. Thermal analysis and optical transition of Yb³⁺, Er³⁺ co-doped lead–germanium–tellurite glasses

   • Zhongmin Yang
   • Shiqing Xu
   • Zhonghong Jiang

   Articles 01 June 2004 Pages: 1630 - 1637

8. Temperature-dependent ferroelectric properties of (Pb_0.75La_0.25)TiO₃ thin films

   • S. T. Zhang
   • J. P. Li
   • N. B. Ming

   Articles 01 June 2004 Pages: 1638 - 1642

9. Fabrication of β-boron by chemical-reaction and melt-quenching methods at high pressures

   • V. V. Brazhkin
   • T. Taniguichi
   • S. V. Popova

   Articles 01 June 2004 Pages: 1643 - 1648

10. Microwave-assisted synthesis of one-dimensional nanostructures

    • Qingyi Lu
    • Feng Gao
    • Sridhar Komarneni

    Articles 01 June 2004 Pages: 1649 - 1655

11. Facile method of infilling photonic silica templates with rare earth element oxide phosphor precursors

    • J. Silver
    • T. G. Ireland
    • R. Withnall

    Articles 01 June 2004 Pages: 1656 - 1661

12. Effect of drop impact energy on contact resistance of anisotropic conductive adhesive film joints

    • Rashed Adnan Islam
    • Y. C. Chan
    • B. Ralph

    Articles 01 June 2004 Pages: 1662 - 1668

13. Coating of TiO₂ nanolayer on spherical Ni particles using a novel sol-gel route

    • Jae-Young Lee
    • Seong-Hyeon Hong
    • Jae-Young Choi

    Articles 01 June 2004 Pages: 1669 - 1675

14. Magnetic field–induced biomimetic synthesis of superparamagnetic poly (vinyl alcohol)–maghemite composite

    • Arvind Sinha
    • Jui Chakraborty
    • P. Ramachandrarao

    Articles 01 June 2004 Pages: 1676 - 1681

15. Using self-assembling monolayers to study crack initiation in epoxy/silicon joints

    • M. S. Kent
    • E. D. Reedy
    • R. Assink

    Articles 01 June 2004 Pages: 1682 - 1695

16. Critical factors that determine face-centered cubic to body-centered cubic phase transformation in sputter-deposited austenitic stainless steel films

    • X. Zhang
    • A. Misra
    • M. Nastasi

    Articles 01 June 2004 Pages: 1696 - 1702

17. A new scheme for computational modeling of conical indentation in plastically graded materials

    • Yan Ping Cao
    • Jian Lu

    Articles 01 June 2004 Pages: 1703 - 1716

18. Use of aluminum in air-brazing aluminum oxide

    • Jin Yong Kim
    • John S. Hardy
    • K. Scott Weil

    Articles 01 June 2004 Pages: 1717 - 1722

19. Alloys that form conductive and passivating oxides for proton exchange membrane fuel cell bipolar plates

    • Neil Aukland
    • Abdellah Boudina
    • Simon S. Wang

    Articles 01 June 2004 Pages: 1723 - 1729

20. Etching to obtain atomically flat 6H–SiC (000-1) surface after annealing in nitrogen ambient

    • Masashi Harada
    • Takayuki Nagano
    • Noriyoshi Shibata

    Articles 01 June 2004 Pages: 1730 - 1735

21. Synthesis and characterization of polyether structure carbon nitride

    • Tiancheng Mu
    • Jun Huang
    • Haixiang Gao

    Articles 01 June 2004 Pages: 1736 - 1741

22. Thermodynamic modeling of the Ni–Al–Ga–N system

    • B. A. Hull
    • S. E. Mohney
    • Z-K. Liu

    Articles 01 June 2004 Pages: 1742 - 1751

23. Fracture mode transitions in brittle coatings on compliant substrates as a function of thickness

    • Herzl Chai
    • Brian R. Lawn

    Articles 01 June 2004 Pages: 1752 - 1761

24. A new approach to characterization of the transition temperatures of thin film NiTi shape memory alloys

    • Nicholas W. Botterill
    • David M. Grant
    • Clive J. Roberts

    Articles 01 June 2004 Pages: 1762 - 1767

25. Growth and characterization of gallium nitride nanowires produced on different sol-gel derived catalyst dispersed in titania and polyvinyl alcohol matrix

    • A. Chatterjee
    • S. Chattopadhyay
    • H. Y. Lee

    Articles 01 June 2004 Pages: 1768 - 1774

26. Deposition and characterization of HfO₂ high k dielectric films

    • Wai Lo
    • Arvind Kamath
    • Zhihao Chen

    Articles 01 June 2004 Pages: 1775 - 1782

27. Nanotopography impact in shallow-trench isolation chemical mechanical polishing—analysis method and consumable dependence

    • Jea-Gun Park
    • Takeo Katoh
    • Ungyu Paik

    Articles 01 June 2004 Pages: 1783 - 1790

28. Effects of substrate on determination of hardness of thin films by nanoscratch and nanoindentation techniques

    • Noureddine Tayebi
    • Andreas A. Polycarpou
    • Thomas F. Conry

    Articles 01 June 2004 Pages: 1791 - 1802

29. Carbon nanotubes grown on different-sized rectangular patterns

    • Lujun Pan
    • Yoshikazu Nakayama
    • Chikashi Inazumi

    Articles 01 June 2004 Pages: 1803 - 1807

30. Evolution of microstructure during the thermal processing of aluminum-modified titania and aluminum/vanadium co-modified titania gels

    • Francis J. Allison
    • David M. Grant
    • Philip G. Harrison

    Articles 01 June 2004 Pages: 1808 - 1817

31. Quantifying improvements in adhesion of platinum films on brittle substrates

    • M. J. Cordill
    • N. R. Moody
    • D. F. Bahr

    Articles 01 June 2004 Pages: 1818 - 1825

32. Tensile fracture behaviors of solid-state-annealed eutectic SnPb and lead-free solder flip chip bumps

    • Jin-Wook Jang
    • Ananda P. De Silva
    • Darrel R. Frear

    Articles 01 June 2004 Pages: 1826 - 1834

33. Phase transition of iron inside carbon nanotubes under electron irradiation

    • Hansoo Kim
    • Michael J. Kaufman
    • Wolfgang M. Sigmund

    Articles 01 June 2004 Pages: 1835 - 1839

34. Mechanical properties of nanostructured amorphous metal multilayer thin films

    • J. B. Vella
    • A. B. Mann
    • R. C. Cammarata

    Articles 01 June 2004 Pages: 1840 - 1848

35. New lead-free relaxors based on the K_0.5Na_0.5NbO₃–SrTiO₃ solid solution

    • Marija Kosec
    • Vid Bobnar
    • Janez Holc

    Articles 01 June 2004 Pages: 1849 - 1854

36. Enthalpy of formation of cubic yttria-stabilized hafnia

    • Theresa A. Lee
    • Alexandra Navrotsky

    Articles 01 June 2004 Pages: 1855 - 1861

37. Ferroelectric property of an epitaxial lead zirconate titanate thin film deposited by a hydrothermal method

    • Takeshi Morita
    • Yasuo Wagatsuma
    • Yasuo Cho

    Articles 01 June 2004 Pages: 1862 - 1868

38. Microstructure of SrTiO₃ buffer layers and itseffects on superconducting properties ofYBa₂Cu₃O_7-δ coated conductors

    • H. Wang
    • S. R. Foltyn
    • P. C. Dowden

    Articles 01 June 2004 Pages: 1869 - 1875

39. Microwave-assisted synthesis of calcium phosphate nanowhiskers

    • Sahil Jalota
    • A. Cuneyt Tas
    • Sarit B. Bhaduri

    Articles 01 June 2004 Pages: 1876 - 1881