1. From The Editor

   • Thomas Prucha

   Editorial 21 September 2022 Pages: 1635 - 1636

   

2. Seven Keys to Long-Term Success: Lessons from a 50-Year Career

   • Jean Bye

   Technical Paper 24 August 2022 Pages: 1637 - 1650

   

3. Appropriate Heat Treatment Procedures for Improving Strength and Quality Index in 354 Casting Alloys

   • H. R. Ammar
   • A. M. Samuel
   • G. K. Sigworth

   Technical Paper 11 November 2021 Pages: 1651 - 1668

   

4. Fluidized Bed Heat Treating of a Magnesium-Rare Earth Alloy

   • Jayme Keist
   • Yuandong Li
   • Diran Apelian

   Technical Paper 11 January 2022 Pages: 1669 - 1679

   

5. Processing and Properties of Magnesium-Based Composites Reinforced with Low Levels of Al₂O₃

   • Payam Emadi
   • Bernoulli Andilab
   • Comondore Ravindran

   Technical Paper 07 January 2022 Pages: 1680 - 1692

   

6. Fatigue Properties and Simulation of Thin Wall ADI and IADI Castings

   • Mervat M. Ibrahim
   • A. M. Negm
   • Khaled M. Ibrahim

   Technical Paper 30 November 2021 Pages: 1693 - 1708

   

7. Metallurgical Parameters Controlling Fragmentation and Spheroidization Processes of Eutectic Si Particles in Al-Si Cast Alloys

   • A. M. Samuel
   • M. H. Abdelaziz
   • F. H. Samuel

   Technical Paper 12 November 2021 Pages: 1709 - 1731

   

8. Correction to: Metallurgical Parameters Controlling Fragmentation and Spheroidization Processes of Eutectic Si Particles in Al–Si Cast Alloys

   • A. M. Samuel
   • M. H. Abdelaziz
   • F. H. Samuel

   Correction 06 December 2021 Pages: 1732 - 1732

9. Effect of Antimony on the Microstructure Evolution and Mechanical Properties of Hypereutectic Al–Si Rheological High Pressure Die Casting Alloy

   • Pengyu Yan
   • Yabo Liu
   • Bingdong Yan

   Technical Paper 11 November 2021 Pages: 1733 - 1744

   

10. Design and Development of an Energy-Efficient Oil-Fired Tilting Furnace with an Innovative Recuperator

    • Prabhjot Singh
    • Harpreet Singh
    • Anoop Kumar Singh

    Technical Paper 16 November 2021 Pages: 1745 - 1757

    

11. Simulation Based Optimization of Geometrical Factors and Process Parameters for a Continuous Caster to Fabricate Aluminum Based MMC

    • Prasenjit Biswas
    • Santosh Mishra
    • Sanjeev Das

    Technical Paper 17 November 2021 Pages: 1758 - 1776

    

12. Understanding the Effect of Be Addition on the Microstructure and Tensile Properties of Al–Si–Mg Cast Alloys

    • E. A. Elsharkawi
    • M. F. Ibrahim
    • F. H. Samuel

    Technical Paper 19 November 2021 Pages: 1777 - 1795

    

13. Influence of Ni and Y Plus Ni Complex Additions on Microstructure and Mechanical Properties of Al–7Si Alloy

    • Li Qinglin
    • Zhang Yan
    • Lan Yefeng

    Technical Paper 22 November 2021 Pages: 1796 - 1808

    

14. Composition Optimization and Strengthening Mechanism of High-Strength Composite Water-Soluble Salt Core for Foundry

    • Xuan-yu Liu
    • Wei-hua Liu
    • Ying-min Li

    Technical Paper 30 November 2021 Pages: 1809 - 1816

    

15. Utilization of Natural Mineral Ilmenite-Reinforced Composites for the Dry Sliding Application

    • Varun Singhal
    • O. P. Pandey

    Technical Paper 01 December 2021 Pages: 1817 - 1835

    

16. Effects of Short-Time Austenitization on Mechanical Properties and Transformation-Induced Plasticity in Alloyed Austempered Ductile Iron

    • Burak Nalcaci
    • Omer Sahin
    • Mehmet Erdogan

    Technical Paper 01 December 2021 Pages: 1836 - 1848

    

17. Research on Modification of Steel Fiber in Investment Casting shell

    • Kai Lü
    • Simin Shen
    • Kaixin Liu

    Technical Paper 01 December 2021 Pages: 1849 - 1857

    

18. Optimized Hot Tearing Resistance of VW63K Magnesium Alloy

    • Zhiyuan Yang
    • Muqing Li
    • Fusheng Pan

    Technical Paper 01 December 2021 Pages: 1858 - 1868

    

19. Effect of Copper and Chromium Addition on the Mechanical and Wear Resistance of Tempered Hypoeutectic Grey Cast Iron used in Crusher Applications

    • M. Habireche
    • N. Bacha
    • D. Saidi

    Technical Paper 02 December 2021 Pages: 1869 - 1884

    

20. Effect of Blowing Agent CaCO₃ Content on the Microstructure and Mechanical Properties of AA 5083 Foam

    • Divakar Bommana
    • Niranjan Sahoo
    • T. Rajesh Kumar Dora

    Technical Paper 02 December 2021 Pages: 1885 - 1901

    

21. Effects of Zn Content on Hot Tearing Susceptibility of Mg–Zn–Gd–Y–Zr Alloys

    • Ziqi Wei
    • Shimeng Liu
    • Zhi Wang

    Technical Paper 03 January 2022 Pages: 1902 - 1914

    

22. Effects of Free-Cutting Elements Addition on the Microstructure, Hardness, and Machinability of Al-11%Si–Cu–Mg Casting Alloys

    • Y. Zedan
    • A. M. Samuel
    • F. H. Samuel

    Technical Paper 05 January 2022 Pages: 1915 - 1931

    

23. Investigations on Mechanical Properties of Micro- and Nano-Particulates (Al₂ O₃/B₄C) Reinforced in Al 7075 Matrix Composite

    • G. Kumaresan
    • B. Arul kumar

    Technical Paper 06 January 2022 Pages: 1932 - 1939

    

24. Effect of Ca–Sr–Mg and Bi–Sr–Mg Interactions on the Microstructural Characterization and Tensile Properties of B319 Alloy

    • A. M. Samuel
    • H. R. Ammar
    • F. H. Samuel

    Technical Paper 07 January 2022 Pages: 1940 - 1959

    

25. Rejuvenation of Nickel-Based Superalloy Experiencing Creep via Use of Hot Isostatic Pressing and Heat Treatment

    • Mohammad Mehdi Barjesteh

    Technical Paper 07 January 2022 Pages: 1960 - 1975

    

26. Microstructure, Mechanical and Wear Properties of Low-Density Cast Medium and High Entropy Aluminium Alloys

    • Hilmi Sahin
    • Huseyin Zengin

    Technical Paper 07 January 2022 Pages: 1976 - 1984

    

27. Post-Processing of Stir Casted Al–Si12Cu Metal Matrix Composite by Friction Stir Processing

    • Vipin Sharma
    • Suresh Kumar
    • Pardeep Kumar Nagpal

    Technical Paper 07 January 2022 Pages: 1985 - 1994

    

28. An Investigation on Wear Behaviour of ASTM B23 tin-Based Babbitt Alloy Developed Through Microwave-Assisted Casting

    • Sameer S. Gajmal
    • Dadarao N. Raut

    Technical Paper 08 January 2022 Pages: 1995 - 2013

    

29. Computer-Aided Engineering (CAE) Simulation for the Robust Gating System Design: Improved Process for Investment Casting Defects of 316L Stainless Steel Valve Housing

    • Yi Chen Kao
    • Ming-Hsiu Ho
    • Yiin-Kuen Fuh

    Technical Paper 10 January 2022 Pages: 2014 - 2032

    

30. Homogeneity Study of TiC and η Phases Via Electromagnetic Stirring in Arc-Melted Heat-Resistant A286 Superalloys Varied with Carbon and Titanium Contents

    • Muhammad Saqlain Qurashi
    • Yajun Zhao
    • Ying Li

    Technical Paper 11 January 2022 Pages: 2033 - 2049

    

31. Effect of Heat Treatments on the Microstructure, Mechanical, Wear and Corrosion Resistance of Casted Hadfield Steel

    • R. Zellagui
    • L. Hemmouche
    • N. Djalleb

    Technical Paper 11 January 2022 Pages: 2050 - 2064

    

32. Solidification Structure and Heat Treatment Behavior of Multi-alloyed White Cast Iron with Extensive Molybdenum Content for Applying to Hot Work Rolls

    • Jatupon Opapaiboon
    • Sudsakorn Inthidech
    • Yasuhiro Matsubara

    Technical Paper 12 January 2022 Pages: 2065 - 2078

    

33. Evaluation of Microstructures, Mechanical and Dry-Sliding Wear Performance of A356-(Fly Ash/SiCp) Hybrid Composites

    • R. Soundararajan
    • A. Sathishkumar
    • S. Karthik

    Technical Paper 13 January 2022 Pages: 2079 - 2096

    

34. Review on effect of tooling parameters on microwave processing of metallic materials with special emphasis on melting/casting application

    • Shruti C. Bhatt
    • Nilesh D. Ghetiya

    Technical Paper 16 January 2022 Pages: 2097 - 2127

    

35. Effect of TiC Reinforcement on Mechanical and Wear Properties of AZ91 Matrix Composites

    • Anil Kumar
    • Santosh Kumar
    • Devendra Kumar Sinha

    Technical Paper 18 January 2022 Pages: 2128 - 2143

    

36. Research on the Relationship between Sodium Bicarbonate Content and “Over-gassing” in the Core Making Process of CO₂ Hardening Sodium Silicate Sand

    • Kangbo Zhao
    • Weihua Liu
    • Yingmin Li

    Technical Paper 22 January 2022 Pages: 2144 - 2149

    

37. Microstructure and Tribological Characterization of Composite Castings Developed through In-situ Microwave Hybrid Heating

    • Sarbjeet Kaushal

    Technical Paper 23 January 2022 Pages: 2150 - 2161

    

38. Effect of External Pressure on the Microstructure and Mechanical Properties of In Situ (ZrB₂+Al₂O₃/Al₃Zr)/6016 Nanocomposites

    • Soban Muddassir Dar
    • Yutao Zhao
    • Zhuangzhuang Xu

    Technical Paper 24 January 2022 Pages: 2162 - 2174

    

39. Effect of Runner Thickness and Hydrogen Content on the Mechanical Properties of A356 Alloy Castings

    • Mahmoud Ahmed El-Sayed
    • Khamis Essa
    • Hany Hassanin

    Technical Paper Open access 24 January 2022 Pages: 2175 - 2186

    

40. The Effect of Cooling Rate on the Microstructure and Hardness of As-Cast Co-28Cr-6Mo Alloy Used as Biomedical Knee Implant

    • Douglas Júnior da Silva
    • Rodrigo Contieri
    • Ricardo Floriano

    Technical Paper 25 January 2022 Pages: 2187 - 2198

    

41. Effect of Trace Rare Earth Er Addition on Microstructure and Tensile Properties of 319 Al-Si-Cu Alloy

    • Denisha N. Patel
    • Mayur P. Sutaria

    Technical Paper 25 January 2022 Pages: 2199 - 2209

    

42. Tensile Property and Corrosion Behavior of Die-Casting AlSi₁₀Cu₃+0.6wt% (La + Yb) Alloy with T6 Heat Treatment

    • Yuqiang Rao
    • Hong Yan
    • Lijie Zhang

    Technical Paper 28 January 2022 Pages: 2210 - 2220

    

43. Metalcasting Industry Research

    News 24 September 2022 Pages: 2221 - 2229