Articles

1. Framework for the Generation of 3D Fiber Composite Structures from 2D Observations

   • Kenneth M. Clarke
   • John Wertz
   • Michael Groeber

   Technical Article Open access 16 May 2024

   

2. Evolution of Model-Based Materials Definitions

   • David U. Furrer
   • Dennis M. Dimiduk
   • Charles H. Ward

   Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 15 May 2024

   

3. Annotating Materials Science Text: A Semi-automated Approach for Crafting Outputs with Gemini Pro

   • Hasan M. Sayeed
   • Trupti Mohanty
   • Taylor D. Sparks

   Thematic Section: Harnessing the Power of Materials Data 13 May 2024

   

4. Cross-Sectional Melt Pool Geometry of Laser Scanned Tracks and Pads on Nickel Alloy 718 for the 2022 Additive Manufacturing Benchmark Challenges

   • Jordan S. Weaver
   • David Deisenroth
   • Ho Yeung

   Thematic Section: Additive Manufacturing Benchmarks 2022 Open access 07 May 2024

   

5. Multi-objective Optimization-Oriented Generative Adversarial Design for Multi-principal Element Alloys

   • Z. Li
   • N. Birbilis

   Thematic Section: Harnessing the Power of Materials Data Open access 30 April 2024

   

6. Material Property Prediction Using Graphs Based on Generically Complete Isometry Invariants

   • Jonathan Balasingham
   • Viktor Zamaraev
   • Vitaliy Kurlin

   Technical Article Open access 16 April 2024

   

7. Semantics-Enabled Data Federation: Bringing Materials Scientists Closer to FAIR Data

   • Kareem S. Aggour
   • Vijay S. Kumar
   • Varish Mulwad

   Thematic Section: Harnessing the Power of Materials Data Open access 09 April 2024

   

8. Online Measurement for Parameter Discovery in Fused Filament Fabrication

   • Jake Robert Read
   • Jonathan E. Seppala
   • Neil Gershenfeld

   Technical Article Open access 03 April 2024

   

9. Three-Dimensional Prediction of Lack-of-Fusion Porosity Volume Fraction and Morphology for Powder Bed Fusion Additively Manufactured Ti–6Al–4V

   • Vamsi Subraveti
   • Brodan Richter
   • Caglar Oskay

   Technical Article 25 March 2024

   

10. A Comparative Study of Clustering Methods for Nanoindentation Mapping Data

    • Mehrnoush Alizade
    • Rushabh Kheni
    • Rodica Neamtu

    Technical Article 25 March 2024

    

11. A Case Study of Multimodal, Multi-institutional Data Management for the Combinatorial Materials Science Community

    • Sarah I. Allec
    • Eric S. Muckley
    • Apurva Mehta

    Thematic Section: Harnessing the Power of Materials Data 22 March 2024

    

12. High-Throughput Extraction of Phase–Property Relationships from Literature Using Natural Language Processing and Large Language Models

    • Luca Montanelli
    • Vineeth Venugopal
    • Marat I. Latypov

    Thematic Section: Harnessing the Power of Materials Data Open access 19 March 2024

    

13. A Methodology for the Rapid Qualification of Additively Manufactured Materials Based on Pore Defect Structures

    • Krzysztof S. Stopka
    • Andrew Desrosiers
    • Michael D. Sangid

    Technical Article Open access 27 February 2024 Pages: 335 - 359

    

14. Correction: AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions

    • Newell Moser
    • Jake Benzing
    • Nikolas Hrabe

    Correction Open access 26 February 2024 Pages: 360 - 361

15. A General Materials Data Science Framework for Quantitative 2D Analysis of Particle Growth from Image Sequences

    • Sameera Nalin Venkat
    • Thomas G. Ciardi
    • Laura S. Bruckman

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering Open access 20 February 2024 Pages: 71 - 82

    

16. MICRO2D: A Large, Statistically Diverse, Heterogeneous Microstructure Dataset

    • Andreas E. Robertson
    • Adam P. Generale
    • Surya R. Kalidindi

    Thematic Section: Harnessing the Power of Materials Data 12 February 2024 Pages: 120 - 154

    

17. Temperature-Dependent Material Property Databases for Marine Steels—Part 6: HY-100

    • Justin E. Norkett
    • Jennifer K. Semple
    • Charles R. Fisher

    Technical Article 07 February 2024 Pages: 305 - 334

    

18. A Common Data Dictionary and Common Data Model for Additive Manufacturing

    • Alexander Kuan
    • Kareem S. Aggour
    • Hunter Macdonald

    Thematic Section: Harnessing the Power of Materials Data Open access 07 February 2024 Pages: 105 - 119

    

19. Blockchain-Based Security Access Control System for Sharing Squeeze Casting Process Database

    • Jianxin Deng
    • Gang Liu
    • Xiangming Zeng

    Thematic Section: Harnessing the Power of Materials Data 06 February 2024 Pages: 92 - 104

    

20. Phase Composition and Phase Transformation of Additively Manufactured Nickel Alloy 718 AM Bench Artifacts

    • Fan Zhang
    • Aaron C. Johnston-Peck
    • Jan Ilavsky

    Thematic Section: Additive Manufacturing Benchmarks 2022 Open access 05 February 2024 Pages: 185 - 200

    

21. Ability to Simulate Absorption and Melt Pool Dynamics for Laser Melting of Bare Aluminum Plate: Results and Insights from the 2022 Asynchronous AM-Bench Challenge

    • Brian J. Simonds
    • Jack Tanner
    • Paul A. Williams

    Thematic Section: Additive Manufacturing Benchmarks 2022 Open access 01 February 2024 Pages: 175 - 184

    

22. Heat Source Model Development for Thermal Analysis of Laser Powder Bed Fusion Using Bayesian Optimization and Machine Learning

    • Masahiro Kusano
    • Makoto Watanabe

    Technical Article Open access 19 January 2024 Pages: 288 - 304

    

23. Reconstructing Microstructures From Statistical Descriptors Using Neural Cellular Automata

    • Paul Seibert
    • Alexander Raßloff
    • Markus Kästner

    Technical Article Open access 18 January 2024 Pages: 272 - 287

    

24. Enhancing Reproducibility in Precipitate Analysis: A FAIR Approach with Automated Dark-Field Transmission Electron Microscope Image Processing

    • Ghezal Ahmad Jan Zia
    • Thomas Hanke
    • Bernd Bayerlein

    Technical Article Open access 18 January 2024 Pages: 257 - 271

    

25. PRISMS-Indentation: Multi-scale Elasto-Plastic Virtual Indentation Module

    • Aaron E. Tallman
    • Mohammadreza Yaghoobi

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 17 January 2024 Pages: 53 - 70

    

26. AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions

    • Newell Moser
    • Jake Benzing
    • Nikolas Hrabe

    Thematic Section: Additive Manufacturing Benchmarks 2022 Open access 16 January 2024 Pages: 155 - 174

    

27. Phase Identification in Synchrotron X-ray Diffraction Patterns of Ti–6Al–4V Using Computer Vision and Deep Learning

    • Weiqi Yue
    • Pawan K. Tripathi
    • Roger H. French

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 16 January 2024 Pages: 36 - 52

    

28. Automated Grain Boundary (GB) Segmentation and Microstructural Analysis in 347H Stainless Steel Using Deep Learning and Multimodal Microscopy

    • Shoieb Ahmed Chowdhury
    • M. F. N. Taufique
    • Keerti S. Kappagantula

    Technical Article 08 January 2024 Pages: 244 - 256

    

29. Beyond Combinatorial Materials Science: The 100 Prisoners Problem

    • J. Elliott Fowler
    • Matthew A. Kottwitz
    • Rémi Dingreville

    Thematic Section: Harnessing the Power of Materials Data 08 January 2024 Pages: 83 - 91

    

30. Robust, Co-design Exploration of Multilevel Product, Material, and Manufacturing Process Systems

    • Mathew Baby
    • Rashmi Rama Sushil
    • Anand Balu Nellippallil

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 29 December 2023 Pages: 14 - 35

    

31. Automated Segmentation and Chord Length Distribution of Melt Pools in Complex 3D Printed Metal Artifacts

    • Sheila E. Whitman
    • Guangyu Hu
    • Marat I. Latypov

    Technical Article 27 December 2023 Pages: 229 - 243

    

32. Temperature-Dependent Material Property Databases for Marine Steels—Part 5: HY-80

    • Jennifer K. Semple
    • Daniel H. Bechetti
    • Charles R. Fisher

    Technical Article 21 December 2023 Pages: 201 - 228

    

33. An Integrated Multiscale Model to Study the Marangoni Effect on Molten Pool and Microstructure Evolution

    • Chuanzhen Ma
    • Ruijie Zhang
    • Xuanhui Qu

    Technical Article 14 December 2023 Pages: 502 - 513

    

34. Coupled Thermal Solidification Process Simulation of Sapphire Growth

    • R. A. Trasca
    • M. Sistaninia
    • S. Lohrasbi

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 14 December 2023 Pages: 1 - 13

    

35. Laser Powder Bed Fusion Process and Structure Data Set for Process Model Validations

    • Nathaniel Wood
    • Edwin Schwalbach
    • David J. Hoelzle

    Technical Article 13 December 2023 Pages: 493 - 501

    

36. Image Processing Pipeline for Fluoroelastomer Crystallite Detection in Atomic Force Microscopy Images

    • Mingjian Lu
    • Sameera Nalin Venkat
    • Yinghui Wu

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 08 December 2023 Pages: 371 - 385

    

37. Temperature-Dependent Material Property Database for C63200 Nickel-Aluminum Bronze (NAB) Plate

    • Sean M. Orzolek
    • Justin E. Norkett
    • Charles R. Fisher

    Technical Article 06 December 2023 Pages: 481 - 492

    

38. A Transformer and Random Forest Hybrid Model for the Prediction of Non-metallic Inclusions in Continuous Casting Slabs

    • Zexian Deng
    • Yungui Zhang
    • Junqiang Cong

    Technical Article 27 November 2023 Pages: 466 - 480

    

39. Lifetime and Degradation Study of Poly(Methyl Methacrylate) via a Data-Driven Study Protocol Approach

    • Hein Htet Aung
    • Donghui Li
    • Laura S. Bruckman

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 22 November 2023 Pages: 349 - 370

    

40. Process–Structure–Property Simulation Approach to the Estimation of Tensile Anisotropy in 3D Printed Meta-stable \(\beta \) Titanium Alloy

    • Luis M. Reig Buades
    • Martin P. Persson

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 15 November 2023 Pages: 338 - 348

    

41. Review of Material Modeling and Digitalization in Industry: Barriers and Perspectives

    • Lucia Scotti
    • Hector Basoalto
    • Daniel Cogswell

    Review Article Open access 10 November 2023 Pages: 397 - 420

    

42. Study of TIG Weld Microstructure Formation in Inconel 718 Alloy Using ICME Approach

    • Shambhu Kushwaha
    • M. Agilan
    • Gandham Phanikumar

    Technical Article 07 November 2023 Pages: 456 - 465

    

43. Design and Optimization of Manufacturing Process of Polymer Composites Through Multiscale Cure Analysis and NSGA-II

    • Yagnik Kalariya
    • Soban Babu Beemaraj
    • Amit Salvi

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 03 November 2023 Pages: 321 - 337

    

44. Multi-physics Approach to Predict Fatigue Behavior of High Strength Aluminum Alloy Repaired via Additive Friction Stir Deposition

    • N. I. Palya
    • K. A. Fraser
    • J. B. Jordon

    Technical Article Open access 01 November 2023 Pages: 441 - 455

    

45. A Workflow for Accelerating Multimodal Data Collection for Electrodeposited Films

    • Kimberly L. Bassett
    • Tylan Watkins
    • Brad L. Boyce

    Technical Article Open access 26 October 2023 Pages: 430 - 440

    

46. Tempered Hardness Optimization of Martensitic Alloy Steels

    • Heather A. Murdoch
    • Daniel M. Field
    • Krista R. Limmer

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 26 October 2023 Pages: 301 - 320

    

47. Predicting Sintering Window of Binder Jet Additively Manufactured Parts Using a Coupled Data Analytics and CALPHAD Approach

    • Rangasayee Kannan
    • Peeyush Nandwana

    Technical Article 25 October 2023 Pages: 421 - 429

    

48. CAROUSEL: An Open-Source Framework for High-Throughput Microstructure Simulations

    • Sebastian Carrion Ständer
    • Nora Barschkett
    • Evgeniya Kabliman

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering Open access 23 October 2023 Pages: 289 - 300

    

49. Part Deflection Measurements of AM‑Bench IN718 3D Build Artifacts

    • Maxwell Praniewicz
    • Jason C. Fox
    • Jared Tarr

    Thematic Section: Additive Manufacturing Benchmarks 2022 06 October 2023 Pages: 386 - 396

    

50. VAMPYR: A MATLAB-Based Toolset Leveraging MTEX for Automating VPSC

    • B. A. Begley
    • V. M. Miller

    Thematic Section: 7th World Congress on Integrated Computational Materials Engineering 03 October 2023 Pages: 277 - 288