Avoid common mistakes on your manuscript.
Correction to: Integrating Materials and Manufacturing Innovation: https://doi.org/10.1007/s40192-023-00333-3
The authors have discovered an error in Table 1 of the above in-print article, titled “AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHALAMB2022-04-MaTTO) and Summary of Predictions” [1]. Regrettably, Table 1 in the original article describes the chemical compositions of the powder feedstock and solid material for a different build of nickel alloy IN625 parts, used elsewhere in the 2022 NIST Additive Manufacturing Benchmarks. While minor differences technically exist, it is worth emphasizing that both powder lots and builds of IN625 are within specification of ASTM B564-22
As stated in the original article [1], the IN625 build plate used for this benchmarking challenge was named AMB2022-625-CBM-B2. The corrected chemical composition of the powder feedstock used for this additively manufactured build plate, as well as the chemical composition of the solid material (after manufacturing), are provided below in Table 1.
References
Moser N, Benzing J, Kafka OL, Weaver J, Derimow N, Rentz R, Hrabe N (2024) AM bench 2022 macroscale tensile challenge at different orientations (CHAL-AMB2022-04-MaTTO) and summary of predictions. Integr Mater Manuf Innov. https://doi.org/10.1007/s40192-023-00333-3
ASTM B564–22 (2022) Standard specification for nickel alloy forgings. https://doi.org/10.1520/B0564-22
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Moser, N., Benzing, J., Kafka, O.L. et al. Correction: AM Bench 2022 Macroscale Tensile Challenge at Different Orientations (CHAL-AMB2022-04-MaTTO) and Summary of Predictions. Integr Mater Manuf Innov 13, 360–361 (2024). https://doi.org/10.1007/s40192-024-00346-6
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40192-024-00346-6