1. An Ancient Traditional Indian Archaeometallurgical Artefact: “Dokra”

   • Rahul Samanta
   • Arindam Biswas
   • Atul Bandyopadhyay

   ORIGINAL CONTRIBUTION 27 December 2022 Pages: 443 - 448

   

2. Application of SiC and Graphite reinforced Aluminium Metal Matrix Composite in Braking Systems and its Validation Through Finite Element Analysis

   • Arpita Chatterjee
   • Soumyadeep Sen
   • Manojit Ghosh

   ORIGINAL CONTRIBUTION 30 December 2022 Pages: 449 - 464

   

3. Assessment of Environmental Impacts of Different Mine Unit Operations on Mine Workers and the Workplaces: A Field-Based Investigation

   • Falguni Sarkar

   ORIGINAL CONTRIBUTION 28 December 2022 Pages: 465 - 478

   

4. Assessment of Water Condition in Underground Mine Workings of Belgaon Coal Mine, India

   • Abhay Kumar Soni
   • Chandrani Prasad Verma
   • Surendra Nath Singh

   ORIGINAL CONTRIBUTION 02 January 2023 Pages: 479 - 487

   

5. Development of Aluminum-Based Composite Material by using Bagasse Ash and Eggshell as Reinforcement Along with Nano-CuO Particles

   • Shashi Prakash Dwivedi
   • Rohit Sahu

   Original Contribution 29 December 2022 Pages: 489 - 502

   

6. Development of Multiple Regression Model for Assessment of Coal Calorific Value in Indian Opencast Mines

   • Nilesh Pratap Singh
   • Vikram Seervi
   • Nawal Kishore

   ORIGINAL CONTRIBUTION 03 January 2023 Pages: 503 - 514

   

7. Development of Resistive-type IoT-Based Methane Gas Concentration Transmitter Using SnO₂ Material

   • Animesh Ghosh
   • Bikas Mondal
   • Arindam Biswas

   ORIGINAL CONTRIBUTION 27 December 2022 Pages: 515 - 529

   

8. Diagnostics of Dissimilar Weld Joints of Austenitic to Pearlitic Steels by Acoustic Emission

   • Vera Barat
   • Artem Marchenkov
   • Sergey Elizarov

   Original Contribution 06 October 2022 Pages: 531 - 538

   

9. Effect of Mo- and SiC-Reinforced NiCr Microwave Cladding on Microstructure, Mechanical and Wear Properties

   • H. Sharanabasava
   • C. Durga Prasad
   • M. R. Ramesh

   ORIGINAL CONTRIBUTION 13 January 2023 Pages: 539 - 551

   

10. Effect of Oil Bean Stalk Filler on the Thermo-Mechanical Properties of Developed Aluminium Dross Composites for Building Ceilings

    • Joseph O. Dirisu
    • Damola S. Adelekan
    • Imhade P. Okokpujie

    Original Contribution 14 November 2022 Pages: 553 - 559

    

11. Effect of Processing Route on the Mechanical and Tribological Behaviour of AA8011 Hybrid Composites

    • N. Babu
    • R. Soundararajan
    • M. Kamaraj

    Original Contribution 26 September 2022 Pages: 561 - 567

    

12. Experimental Studies of Failure in L-Shaped Carbon Fiber-Reinforced Polymer Composite Under Pullout and Four-Point Bending

    • Bipin Kumar Chaurasia
    • Deepak Kumar
    • Mani Kant Paswan

    Original Contribution 06 October 2022 Pages: 569 - 579

    

13. Evaluation of Absorption and Photoluminescence in Graphene Oxide Obtained Through a Simple Route

    • Ashu Jangra
    • Sonal Sahai
    • Vibha R. Satsangi

    ORIGINAL CONTRIBUTION 01 December 2022 Pages: 581 - 586

    

14. Fabrication and Characterization of Silicon Carbide and Graphite Reinforced Aluminium Matrix Composite

    • Arpita Chatterjee
    • Soumyadeep Sen
    • Goutam Sutradhar

    Original Contribution 01 December 2022 Pages: 587 - 601

    

15. Fabrication of Al 6082/SiC Composite Using Friction Stir Processing

    • Nitesh Kumar
    • Prateek Gupta
    • Rakesh Kumar Singh

    Original Contribution 06 October 2022 Pages: 603 - 608

    

16. Finite Element Investigation of the Geometrical Parameters of Waviness Carbon Nanotube on Directional Young’s and Shear Elastic Modulus of Polymer Nanocomposites

    • Mohsen Eghbalian
    • Reza Ansari
    • Saeed Rouhi

    Original Contribution 21 November 2022 Pages: 609 - 622

    

17. Friction and Wear Characteristics of Hot-Rolled Al7075-TiO₂-Graphite Hybrid Composites

    • Amithkumar Gajakosh
    • R. Keshavamurthy
    • R. Vasanth Kumar

    Original Contribution 07 November 2022 Pages: 623 - 642

    

18. Influence of SiC Reinforcement on AA6061 Alloy Composite Prepared by Gravity Die Casting

    • Anand Tiwari
    • Mayank Agarwal

    ORIGINAL CONTRIBUTION 28 December 2022 Pages: 643 - 649

    

19. Influence of Silicon Carbide Particulates on Vibrational Characteristics for Al 7075 Composites

    • S. R. Srinidhi Acharya
    • P. M. Suresh
    • M. Mruthunjaya

    ORIGINAL CONTRIBUTION 28 January 2023 Pages: 651 - 660

    

20. Investigation on Slurry Erosive Wear Behaviour of HVOF-Sprayed Al₂O₃–CeO₂ Coatings on AZ91 Alloy

    • Kaushik V. Prasad
    • Adarsha Hiriyannaiah
    • R. Keshavamurthy

    Original Contribution 30 December 2022 Pages: 661 - 675

    

21. Maximum Aerobic Capacity and Relative Aerobic Strain among Mobile Mine Equipment Operators in Underground Mines

    • S. Sridhar
    • M. Govinda Raj
    • M. Aruna

    ORIGINAL CONTRIBUTION 28 December 2022 Pages: 677 - 688

    

22. Microstructure and Tribo-corrosion Behavior of Stainless Steel-304 Cladding with the Mixture of Nickel and Chromium Carbide by Microwave Energy

    • Shashi Prakash Dwivedi

    ORIGINAL CONTRIBUTION 11 January 2023 Pages: 689 - 697

    

23. Modelling of Shallow Drawing of Aluminium Alloy AA2014 Thin Sheet Using FE Simulations

    • G. Narender
    • E. Ramjee
    • N Eswara Prasad

    Original Contribution 09 November 2022 Pages: 699 - 704

    

24. On Titanium Powder Mixed Electric Discharge Machining of Nimonic C-263

    • Prasan Ralph Dewan
    • Pranab Kumar Kundu

    ORIGINAL CONTRIBUTION 11 December 2022 Pages: 705 - 712

    

25. Optimization of Process Parameters in the Synthesis of TiO₂ Nanoparticle Catalyst to Produce Hydrocarbon Oil Using the Catalytic Pyrolysis Process

    • S. Ramasamy
    • R. B. Anand

    ORIGINAL CONTRIBUTION 30 December 2022 Pages: 713 - 721

    

26. Optimization of Wear Parameters on Friction Stir Welded Dissimilar Aluminium Joints

    • M. Madhusudan
    • S. P. Shanmuganatan
    • Shridhar Kurse

    Original Contribution 10 October 2022 Pages: 723 - 738

    

27. Piezo-beam Structure in a Pipe with Turbulent Flow as Energy Harvester: Mathematical Modeling and Simulation

    • Mohit Yadav
    • Surendra Kumar
    • Deepak Chhabra

    ORIGINAL CONTRIBUTION 29 December 2022 Pages: 739 - 752

    

28. Progressive Damage Analysis of Random Oriented Chopped Glass Fiber-Reinforced Laminate Under Three-Point Bending Test

    • Pankaj Chaupal
    • Deepak Kumar

    Original Contribution 29 November 2022 Pages: 753 - 766

    

29. Qualitative Damage Assessment of Laser Contact Opening and Microstructural Evolution at the Rear Contact of a Perc Mono Crystalline Si Solar Cell upon Co-Firing with Si Doped Al Paste

    • Devdutt Singh
    • Himadri Agrawal
    • Priyanka Kamari

    Original Contribution 14 November 2022 Pages: 767 - 776

    

30. Stochastic Study of Random-Ballistic Competitive Growth Model in 2 + 1 Dimension and Related Scaling Exponents

    • S. K. Das
    • D. Banerjee
    • J. N. Roy

    Original Contribution 13 October 2022 Pages: 777 - 784

    

31. Study on Effect of Gouge Depth on the Microstructure and Tensile Properties of 18%Ni Maraging Steel Welds Made Through Hot Wire GTA Welding

    • Chidanand Magadum
    • Rohit Kumar Gupta
    • S. Biju

    ORIGINAL CONTRIBUTION 06 December 2022 Pages: 785 - 794

    

32. Synthesis and Characteristics of Heat Treated Al6061-Zirconium Dioxide Metal Matrix Composites

    • R. Vijayakumar
    • K. C. Anantha Padmanabham
    • S. Udayashankar

    ORIGINAL CONTRIBUTION 02 January 2023 Pages: 795 - 804

    

33. Synthesis of Alumina Sol Binder for Pure Alumina Refractory Castable and its Comparison with Other Commercially Available Binders

    • Pawan Rangdal
    • Sharanabasappa B. Patil

    Original Contribution 14 November 2022 Pages: 805 - 809

    

34. Taguchi Analysis of the Deformation Characteristics of Single-Point Cutting Tool with Micro-Tool Coatings During Orthogonal Machining

    • Anand Pai
    • Satish Shenoy Baloor
    • Chandrakant R. Kini

    Original Contribution Open access 30 December 2022 Pages: 811 - 820

    

35. Critical Analysis of Powder Factor in Dragline Bench Blasting: A Case Study

    • Vikram Seervi

    Case Study 28 October 2022 Pages: 821 - 830

    

36. A Review on High-Velocity Oxy-Fuel (HVOF) Coating Technique

    • Kalluri Anusha
    • Bharat Chandra Routara
    • Spandan Guha

    REVIEW PAPER 02 January 2023 Pages: 831 - 848

    

37. Applications and Challenges of 3D Printed Polymer Composites in the Emerging Domain of Automotive and Aerospace: A Converged Review

    • Pradeep Kumar Mishra
    • T. Jagadesh

    Review Paper 29 December 2022 Pages: 849 - 866

    

38. Exploiting Machine Learning in Multiscale Modelling of Materials

    • G. Anand
    • Swarnava Ghosh
    • James R. Kermode

    Article of professional interests 28 November 2022 Pages: 867 - 877

    

39. Modeling and Simulation of Brake Disc Using Lightweight Materials

    • Tanishq Bheda
    • Dhrupad Joshi
    • S. Darius Gnanaraj

    Article of professional interests 01 December 2022 Pages: 879 - 885

    

40. Simulation of Temperature Distribution in a Brake Pad Ceramic Composite Material

    • Praveenkumar Babu
    • Darius Gnanaraj Solomon

    ARTICLE OF PROFESSIONAL INTERESTS 17 January 2023 Pages: 887 - 896