1. Analyzing the Influence of Microstructure on the Mechanical Properties of Mig Welded Similar and Dissimilar Joints Between AISI-304 and Inconel 718 Plates

   • Aarav Shrenik Dodhia
   • Jhashanka Dadhich
   • Saurabh Dewangan

   Original Contribution 03 January 2024 Pages: 1 - 15

   

2. Constructal Solid and Perforated Fin Installation in a Combined Microchannel Heat Sink for Maximum Heat Transfer

   • N. Y. Godi

   Original Contribution 03 January 2024 Pages: 17 - 30

   

3. Design, Development, and Analysis of Ultrasonic Fall Rate Measuring System for Primary Pressure Standard

   • Rahul Kumar
   • Kalpana Yadav
   • Sanjay Yadav

   Original Contribution 05 January 2024 Pages: 31 - 39

   

4. Study on Effects of Flow Rate of Coolant During CO₂-Assisted MQL Turning of EN31 Steel

   • Sutanu Misra
   • Yogesh Kumar
   • Goutam Paul

   Original Contribution 14 November 2023 Pages: 41 - 57

   

5. Effect on Different Anatomy Layers of Human Subject During Vibration Conditions Using FEM

   • Shubham Sharma
   • Sachin Kalsi
   • Rohit Kumar

   Original Contribution 31 December 2023 Pages: 59 - 68

   

6. Experimental and Numerical Investigation of Effect of Melter Temperature and Casting Speed on Pull-In (Concavity) of AA1050 Ingot During Direct Chill Casting

   • Ritesh Fegade
   • Rajendrakumar Tated
   • Rupendra Nehete

   Original Contribution 05 January 2024 Pages: 69 - 79

   

7. Geographical Information System (GIS)-Based Solar Photovoltaic Farm Site Suitability Using Multi-criteria Approach (MCA) in Southern Tamilnadu, India

   • Vivek Vasudevan
   • Edison Gundabattini
   • S. Darius Gnanaraj

   Original Contribution 09 November 2023 Pages: 81 - 99

   

8. Off-Design Performance Simulation of Non-mixed Twin-Spool Aero Turbine Engine

   • Saeed Jafaripanah
   • Fathollah Ommi
   • Zoheir Saboohi

   Original Contribution 11 November 2023 Pages: 101 - 114

   

9. Role of CNTs on the Resistance to Delamination Growth in Three-Phase FRP Laminates with Embedded Delamination: Finite Element Analysis

   • Chukka Atchuta Rao
   • K. S. R. K. Murthy
   • D. Chakraborty

   Original Contribution 02 December 2023 Pages: 115 - 126

   

10. Rolling Element Bearing Fault Investigation Based on Translation Invariant Wavelet Means Denoising and Empirical Mode Decomposition (EMD)

    • Arvind Singh Tomar
    • Pratesh Jayaswal

    Original Contribution 09 January 2024 Pages: 127 - 140

    

11. Structural Synthesis of Planar Kinematic Chains and Their Detection of Isomorphism

    • Sayeed Ahamad
    • Sabah Khan
    • Aas Mohammad

    Original Contribution 27 January 2024 Pages: 141 - 159

    

12. Study of the Step Climbing Ability of a Rover with Rocker Bogie Mechanism

    • Manav Mepani
    • Anirban Guha

    Original Contribution 08 January 2024 Pages: 161 - 177

    

13. Synthesis and Characterization of Mg and Ti Co-Doped Bismuth Ferrite for Piezoelectric Application

    • Pratim Das
    • Ranit Karmakar

    Original Contribution 03 January 2024 Pages: 179 - 186

    

14. Traction Separation Curve Determination for CP Ti-2 Using the EWF Approach

    • Khushbu Panchal
    • Chaitanya Desai

    Original Contribution 30 November 2023 Pages: 187 - 194

    

15. Workspace Analysis of Calibrated Multi-position Synthesized 3-Prismatic-Revolute-Spherical Manipulator

    • Srinivasa Rao Pundru

    Original Contribution 21 January 2024 Pages: 195 - 214

    

16. Grooves and Cross Section Effects on Energy Absorption of S-Shaped Tubes Under Axial Quasi-Static and Impact Loading

    • Erfan Soheili
    • Saeed Feli

    Review Paper 26 December 2023 Pages: 215 - 232

    

17. Instruments for Addressing Climate Change in Renewable Energy Policy of India: A Review of Developments in Policy Research

    • Anil Kumar Joshi
    • C. M. S. Negi

    Review Paper 18 November 2023 Pages: 233 - 240

    

18. Review on Efforts to Improve the Mechanical Performance of Fiber-Reinforced Polymer (FRP) Composites Under the Marine Environment

    • Praful Choudhari
    • Vivek Kulkarni
    • Sanjeevakumar Khandal

    Review Paper 23 November 2023 Pages: 241 - 269