1. Experimental investigation on Ti₂AlNb in high-efficiency short electric arc milling

   • Bingbing Wang
   • Jianping Zhou
   • Xianhe Yin

   Critical Review 26 February 2024 Pages: 4361 - 4375

   

2. A state-of-the-art review on sustainability evaluation of machining processes involving the effects of advanced cooling technologies

   • Muhammad Jamil
   • Ning He
   • Navneet Khanna

   Critical Review 27 February 2024 Pages: 4377 - 4402

   

3. Cathode design and structure optimization of the ECM for special-shaped deep holes

   • Jianli Jia
   • Qingxiang Wang
   • Yajun Wang

   Critical Review 01 March 2024 Pages: 4403 - 4423

   

4. A novel actuator for precise design of the spatial-distributed Lorentz force in electromagnetic sheet metal forming: process principle, optimization methodology, and experimental validation

   • Zixuan Zhang
   • Zhipeng Lai
   • Liang Li

   ORIGINAL ARTICLE 24 February 2024 Pages: 4425 - 4445

   

5. Process parameter optimization of K477 and GH4169 for defect control in laser-directed energy deposition using Taguchi design of experiments

   • Yuan Li
   • Yun Chen
   • Jiahao Zou

   ORIGINAL ARTICLE 26 February 2024 Pages: 4447 - 4467

   

6. Pure niobium manufactured by Laser-Based Powder Bed Fusion: influence of process parameters and supports on as-built surface quality

   • Silvia Candela
   • Pietro Rebesan
   • Paolo Bettini

   ORIGINAL ARTICLE Open access 26 February 2024 Pages: 4469 - 4482

   

7. Tailoring grain structure including grain size distribution, morphology, and orientation via building parameters on 316L parts produced by laser powder bed fusion

   • Nada Hassine
   • Sami Chatti
   • Lioua Kolsi

   ORIGINAL ARTICLE 26 February 2024 Pages: 4483 - 4498

   

8. Multi-step cutting depth optimization method based on the removal mechanism of SiCp/Al

   • Xu Zhang
   • Liangfei Hu
   • Xuechang Zhang

   ORIGINAL ARTICLE 26 February 2024 Pages: 4499 - 4514

   

9. A study on machining error prediction model of precision vertical grinding machine based on the tolerance of key components

   • Zhuang Li
   • Jinwei Fan
   • Ronghua Yu

   ORIGINAL ARTICLE 26 February 2024 Pages: 4515 - 4528

   

10. Single track formation of TiC reinforced Inconel 718 metal matrix composites using selective laser melting process

    • Bralee Chayasombat
    • Patcharapit Promoppatum
    • Ola L. A. Harrysson

    ORIGINAL ARTICLE 26 February 2024 Pages: 4529 - 4542

    

11. Experimental investigation on axial ultrasonic-assisted grinding of different crystal surfaces of single-crystal gallium oxide

    • Shixiang Hu
    • Hai Zhou
    • Jinde Song

    ORIGINAL ARTICLE 26 February 2024 Pages: 4543 - 4556

    

12. Numerical simulation of gravity effects on keyhole behaviors in laser mirror welding of 2219 aluminum alloy

    • Xiaohong Zhan
    • Zetao Ye
    • Leilei Wang

    ORIGINAL ARTICLE 26 February 2024 Pages: 4557 - 4574

    

13. A new variant of the inherent strain method for the prediction of distortion in powder bed fusion additive manufacturing processes

    • Pegah Pourabdollah
    • Farzaneh Farhang Mehr
    • Daan Maijer

    ORIGINAL ARTICLE Open access 26 February 2024 Pages: 4575 - 4594

    

14. Multi-objective optimization of machining parameters in micro-milling LF 21 based on the AHP-entropy weight method

    • Xiaohong Lu
    • Yuhang Tian
    • Steven Y. Liang

    ORIGINAL ARTICLE 26 February 2024 Pages: 4595 - 4609

    

15. Chemical deposition and corrosion perspectives on the development of pipe union steel in automobile industry

    • Olumide Omoegun
    • Ojo Fayomi
    • Oluranti Agboola

    ORIGINAL ARTICLE 26 February 2024 Pages: 4611 - 4620

    

16. A novel prediction method for assembly accuracy of rudder systems considering clearance factors

    • Wei Wei
    • Xiaokai Mu
    • Wei Sun

    ORIGINAL ARTICLE 26 February 2024 Pages: 4621 - 4634

    

17. Simulation study of the punching forming process and die wear of spur gears

    • Zhiyuan Chen
    • Zenghui Guo
    • Bingqiang Liu

    ORIGINAL ARTICLE 26 February 2024 Pages: 4635 - 4648

    

18. The influence of diamond content on the formability and mechanical properties of additively manufactured metal-bonded diamond tools

    • Chenchen Tian
    • Yi Wan
    • Xuekun Li

    ORIGINAL ARTICLE 26 February 2024 Pages: 4649 - 4661

    

19. Research on the effects of machining paths and variable parameters of different passes on defects in multi-pass single-point incremental forming

    • Chunjian Su
    • Tingyi Ding
    • Wei Min Huang

    ORIGINAL ARTICLE 26 February 2024 Pages: 4663 - 4682

    

20. Research on dynamic characteristics of turning process system based on finite element generalized dynamics space

    • Xiangfu Fu
    • Kangnan Li
    • Enyi Chen

    ORIGINAL ARTICLE 27 February 2024 Pages: 4683 - 4698

    

21. Combined rolling-extrusion of various billets from the Al–Ce–La alloy for electrical wire production

    • Denis Sergeevich Voroshilov
    • Sergey Borisovich Sidelnikov
    • Mikhail Mikhaylovich Motkov

    ORIGINAL ARTICLE 27 February 2024 Pages: 4699 - 4725

    

22. Numerical, experimental, and analytical investigation of the skin contamination evolution in the extrusion of different industrial profiles

    • Marco Negozio
    • Riccardo Pelaccia

    Original Article 27 February 2024 Pages: 4727 - 4738

    

23. Effective, versatile and inexpensive extruder system for direct ink writing of high-viscosity pastes

    • Pablo Rodríguez-Lagar
    • Alejandro Reguera-García
    • Victoria G. Rocha

    ORIGINAL ARTICLE Open access 27 February 2024 Pages: 4739 - 4753

    

24. Unraveling the technological performance of low-energy ED-machining for processing Inconel 718 alloy: a comparative study of electrode materials

    • Giovani Conrado Carlini
    • Rodrigo Blödorn
    • Fred Lacerda Amorim

    ORIGINAL ARTICLE 27 February 2024 Pages: 4755 - 4772

    

25. Study on helical milling of small holes in zirconia ceramics with PCD tools

    • Jinpeng He
    • Xiang Cheng
    • Mingze Tang

    ORIGINAL ARTICLE 27 February 2024 Pages: 4773 - 4796

    

26. Parameter optimization of the MQL nozzle by the computational fluid dynamics

    • Lan Yan
    • Kunhui Luo
    • Feng Jiang

    ORIGINAL ARTICLE 28 February 2024 Pages: 4797 - 4810

    

27. Effects of hygrothermal aging on the physicochemical and mechanical properties of 3D-printed PA6

    • Mohammadali Shirinbayan
    • Khaled Benfriha
    • Joseph Fitoussi

    ORIGINAL ARTICLE 28 February 2024 Pages: 4811 - 4823

    

28. Sustainable 3D printing of enhanced carbon nanotube-based polymeric nanocomposites: green solvent-based casting for eco-friendly electrochemical sensing applications

    • Javid Sharifi
    • Ghaus Rizvi
    • Haniyeh (Ramona) Fayazfar

    ORIGINAL ARTICLE 28 February 2024 Pages: 4825 - 4837

    

29. Research on the precision machining of CVD rotary dressers based on graded grinding and real-time profile planning path of grinding wheel

    • Zhenwei Zhu
    • Ying Tie
    • Rui Zhang

    ORIGINAL ARTICLE 28 February 2024 Pages: 4839 - 4849

    

30. Robot motion planning and control for thread hole cleaning tasks

    • Hongtai Cheng
    • Kai Wang
    • Xiong Cheng

    ORIGINAL ARTICLE 29 February 2024 Pages: 4851 - 4863

    

31. Research on the ultrasonic vibration-assisted short electric arc milling process of Inconel 718

    • Shengwei Ding
    • Jianping Zhou
    • Bisheng Zhou

    ORIGINAL ARTICLE 29 February 2024 Pages: 4865 - 4884

    

32. Analysis of high temperature and mixed tool wear effects on UD-CFRP cutting mechanism in stacks drilling

    • Sipeng Cao
    • Ping Liu
    • Muhammad Shahbaz Rafique

    ORIGINAL ARTICLE 29 February 2024 Pages: 4885 - 4902

    

33. A seamless CAD/CAM integration approach for venting system generation in injection mold design

    • Binkui Hou
    • Shuncong Xue
    • Deping Liu

    ORIGINAL ARTICLE 29 February 2024 Pages: 4903 - 4913

    

34. The cutting performance of saw blades with textured structures on the rake face, main flank face, and secondary flank face

    • Yang Lu
    • Jianxin Deng
    • Runzhou Tian

    ORIGINAL ARTICLE 29 February 2024 Pages: 4915 - 4933

    

35. Enhancing automatic inspection and characterization of carbon fiber composites through hyperspectral diffuse reflection analysis and k-means clustering

    • Alaaeldin Mahmoud
    • Mohammed Kassem
    • Yasser H. El-Sharkawy

    ORIGINAL ARTICLE Open access 29 February 2024 Pages: 4935 - 4951

    

36. Facile synthesis of SnO₂ nanopowders on laser-patterned ITO electrodes for fast response NO₂ gas sensors

    • Shih-Feng Tseng
    • Yi-Chin Chen
    • Shu-Han Hsu

    ORIGINAL ARTICLE 29 February 2024 Pages: 4953 - 4964

    

37. An integrated CRITIC-COPRAS approach for multi-response optimization on AWJM of hybrid filler–reinforced polymer composite and its surface integrity

    • Kavimani Vijayananth
    • Gopal Pudhupalayam Muthukutti
    • Wenbin Zhou

    ORIGINAL ARTICLE Open access 29 February 2024 Pages: 4965 - 4980

    

38. Residual stresses in gear form grinding by considering carburizing heat treatment: multi-field coupled numerical simulation and experimental verification

    • Shuying Yang
    • Weifang Chen
    • Ruijun Liang

    ORIGINAL ARTICLE 29 February 2024 Pages: 4981 - 4999

    

39. Investigation of surface roughness, microstructure, and mechanical properties of overhead structures fabricated by wire + arc additive manufacturing

    • Sainand Jadhav
    • Gwang Ho Jeong
    • Duck Bong Kim

    ORIGINAL ARTICLE 01 March 2024 Pages: 5001 - 5021

    

40. Material removal model for describing the plasma discharge effect in magnetic-electrolytic plasma polishing

    • Yuxia Xiang
    • Huanwu Sun
    • Juan Wang

    Original Article 01 March 2024 Pages: 5023 - 5036

    

41. Variation of the vibrational treatment on mechanical properties and weld residual stress

    • Douglas Silva Marques Serrati
    • Ricardo Martins Silva
    • Louriel Oliveira Vilarinho

    ORIGINAL ARTICLE 01 March 2024 Pages: 5037 - 5046

    

42. Research on cutting tool edge geometry design based on SVR-PSO

    • Yimin Jiang
    • Wei Huang
    • Ming Zhou

    ORIGINAL ARTICLE 01 March 2024 Pages: 5047 - 5059

    

43. The surface quality of 316L sheets after abrasive waterjet, photochemical machining, and electropolishing for compact heat exchangers

    • Maria Cristina Amaral
    • Lucas de Andrade Caldas
    • Marcia Barbosa Henriques Mantelli

    ORIGINAL ARTICLE 01 March 2024 Pages: 5061 - 5074

    

44. Generation mechanism of high-order waves in wide titanium strip under the control of the first intermediate taper roll of a 20-high mill

    • Guanyu Zhou
    • Anrui He
    • Yi Qiang

    ORIGINAL ARTICLE 01 March 2024 Pages: 5075 - 5090

    

45. Performance of patterned single-layer diamond grinding wheel in grinding of Al-SiC_P composites with large infeed

    • Trilochan Prasad Nanda
    • Amitava Ghosh

    ORIGINAL ARTICLE 01 March 2024 Pages: 5091 - 5109

    

46. Development of an efficient multi-scale model to predict residual stresses and distortions in the laser powder bed fusion process for Inconel-718

    • Hossein Mohammadtaheri
    • Ramin Sedaghati
    • Marjan Molavi-Zarandi

    ORIGINAL ARTICLE 01 March 2024 Pages: 5111 - 5131

    

47. Circular usage of waste cooking oil towards green electrical discharge machining process with lower carbon emissions

    • Kashif Ishfaq
    • Muhammad Sana
    • Abdul Wasy Zia

    ORIGINAL ARTICLE Open access 01 March 2024 Pages: 5133 - 5153

    

48. A novel path planning method of robotic grinding for free-form weld seam based on 3D point cloud

    • Yan Liu
    • Shuai Yang
    • Xincheng Tian

    ORIGINAL ARTICLE 02 March 2024 Pages: 5155 - 5176

    

49. Modelling and simulation of heat flow in indexable insert drilling

    • Tobias Andersson
    • Daniel Svensson
    • Andreas Andersson Lassila

    ORIGINAL ARTICLE Open access 02 March 2024 Pages: 5177 - 5192

    

50. Improvement of 3D printing polymer simulations considering converting G-code to Abaqus

    • Taoufik Hachimi
    • Fatima Majid
    • Hassan Rhanim

    ORIGINAL ARTICLE 02 March 2024 Pages: 5193 - 5208