1. A review of microstructure evolution during ultrasonic additive manufacturing

   • Dezhi Li

   Critical Review Open access 22 January 2021 Pages: 1 - 19

   

2. Sensors applied to automated guided vehicle position control: a systematic literature review

   • Wallace Pereira Neves dos Reis
   • Orides Morandin Junior

   Survey Paper 23 January 2021 Pages: 21 - 34

   

3. Recent advances in surface defect inspection of industrial products using deep learning techniques

   • Xiaoqing Zheng
   • Song Zheng
   • Jie Chen

   Survey Paper 25 January 2021 Pages: 35 - 58

   

4. Mechanical clinching and self-pierce riveting for sheet combination of 780-MPa high-strength steel and aluminium alloy A5052 sheets and durability on salt spray test of joints

   • Yohei Abe
   • Ken-ichiro Mori

   ORIGINAL ARTICLE Open access 20 January 2021 Pages: 59 - 72

   

5. Study on kerf characteristics and surface integrity based on physical energy model during abrasive waterjet cutting of thick CFRP laminates

   • Maojun Li
   • Xiangchen Lin
   • Xianming Meng

   ORIGINAL ARTICLE 20 January 2021 Pages: 73 - 85

   

6. Roll crown control capacity of sextic CVC work roll curves in plate rolling process

   • Jingguo Ding
   • Yanghaochen He
   • Wen Peng

   ORIGINAL ARTICLE 20 January 2021 Pages: 87 - 97

   

7. Real-time thermal modelling approach of a machine tool spindle based on bond graph method

   • Yun Yang
   • Zhengchun Du
   • Jianguo Yang

   ORIGINAL ARTICLE 20 January 2021 Pages: 99 - 115

   

8. Wear mechanism and experimental study of a tool used for micro-milling single-crystal nickel-based superalloys

   • Qi Gao
   • Guang-yan Guo
   • Ming Cai

   ORIGINAL ARTICLE 20 January 2021 Pages: 117 - 129

   

9. Study on EDM technology of distributed group electrodes in titanium alloy with large inclined angle and thin-walled group holes

   • Ze Yu
   • Dunwen Zuo
   • Wei Chen

   ORIGINAL ARTICLE 21 January 2021 Pages: 131 - 140

   

10. The variable radial depth of cut in finishing machining of thin-walled blade based on the stable-state deformation field

    • Yaohua Hou
    • Dinghua Zhang
    • Baohai Wu

    ORIGINAL ARTICLE 21 January 2021 Pages: 141 - 158

    

11. Modelling and interaction analysis of the self-pierce riveting process using regression analysis and FEA

    • Huan Zhao
    • Li Han
    • Xianping Liu

    ORIGINAL ARTICLE 21 January 2021 Pages: 159 - 176

    

12. Water-jet guided laser drilling of thermal barrier coated aerospace alloy

    • Sundar Marimuthu
    • Bethan Smith

    ORIGINAL ARTICLE 21 January 2021 Pages: 177 - 191

    

13. Mechanism of ultra-high-speed cutting of Ti-6Al-4V alloy considering time-dependent microstructure and mechanical behaviors

    • Guang Chen
    • Jiaying Ge
    • Chengzu Ren

    ORIGINAL ARTICLE 22 January 2021 Pages: 193 - 213

    

14. Semi-automated system for assembly of insulated corner faux bricks

    • Zachary Whittaker
    • Musa K. Jouaneh

    ORIGINAL ARTICLE 23 January 2021 Pages: 215 - 229

    

15. Research on magnetorheological elastomer forming process for complicated superalloy hollow part

    • Hao Li
    • Yong Xu
    • Xun-Zhong Guo

    ORIGINAL ARTICLE 23 January 2021 Pages: 231 - 246

    

16. Analytical modeling of cutting forces considering material softening effect in laser-assisted milling of AerMet100 steel

    • Hang Zhang
    • Haohao Zeng
    • Fangyu Peng

    ORIGINAL ARTICLE 23 January 2021 Pages: 247 - 260

    

17. Exploitation of force displacement curves in blanking—feature engineering beyond defect detection

    • Christian Kubik
    • Johannes Hohmann
    • Peter Groche

    ORIGINAL ARTICLE Open access 22 January 2021 Pages: 261 - 278

    

18. Tolerance optimization method based on flatness error distribution

    • Huan Guo
    • Zhijing Zhang
    • Qirong Zhang

    ORIGINAL ARTICLE 23 January 2021 Pages: 279 - 293

    

19. Vibration suppression of aeroengine casing during milling

    • Liang Guo
    • Fan Yang
    • Junlei Tang

    ORIGINAL ARTICLE 23 January 2021 Pages: 295 - 307

    

20. Modeling, simulation, and prediction of surface topography in two-dimensional ultrasonic rolling 7075 Al-alloy

    • Zheng Jianxin
    • Zhu Lixin
    • Liu Hongwei

    ORIGINAL ARTICLE 23 January 2021 Pages: 309 - 320

    

21. Experimental study on the cutting responses and surface integrity of side milled in situ TiB₂/Al composites

    • Zhenyu Zuo
    • Jie Chen
    • Haowei Wang

    ORIGINAL ARTICLE 23 January 2021 Pages: 321 - 335

    

22. Thermal simulation speculation-based active coolant control onto spindle bearings

    • Teng Liu
    • Liang Zhou
    • Dawei Zhang

    ORIGINAL ARTICLE 23 January 2021 Pages: 337 - 350

    

23. Alternative materials in moulding elements of hybrid moulds: structural integrity and tribological aspects

    • Pedro Gonçalves Martinho
    • António Sérgio Pouzada

    ORIGINAL ARTICLE 24 January 2021 Pages: 351 - 363

    

24. Comparative assessment of lubri-cooling conditions when turning CP-Ti Grade 4 based on surface roughness

    • Fabio Telles
    • Heraldo J. Amorim
    • André J. Souza

    ORIGINAL ARTICLE 24 January 2021 Pages: 365 - 378

    

25. Experimental and numerical prediction on square cup punch–die misalignment during the deep drawing process

    • Alimi Abdul Ghafar
    • Ahmad Baharuddin Abdullah
    • Johan Ihsan Mahmood

    ORIGINAL ARTICLE 25 January 2021 Pages: 379 - 388

    

26. Prediction modeling of surface roughness in milling of carbon fiber reinforced polymers (CFRP)

    • Jiang Xiaohui
    • Gao Shan
    • Liu Lei

    ORIGINAL ARTICLE 25 January 2021 Pages: 389 - 405

    

27. Development and characterization of AISI 316L micro parts produced by metal powder hot embossing

    • Omid Emadinia
    • Maria Teresa Vieira
    • Manuel Fernando Vieira

    ORIGINAL ARTICLE 25 January 2021 Pages: 407 - 417

    

28. Comparative evaluation of supervised machine learning algorithms in the prediction of the relative density of 316L stainless steel fabricated by selective laser melting

    • Germán Omar Barrionuevo
    • Jorge Andrés Ramos-Grez
    • Carlos Andrés Betancourt

    ORIGINAL ARTICLE 25 January 2021 Pages: 419 - 433

    

29. Implementation framework for PLM: a case study in the fashion industry

    • Virginia Fani
    • Chiara Falchi
    • Romeo Bandinelli

    ORIGINAL ARTICLE Open access 25 January 2021 Pages: 435 - 448

    

30. Multi-objective titanium alloy belt grinding parameters optimization oriented to resources allocation and environment

    • Ying Liu
    • Haoran Dong
    • Fankang Meng

    ORIGINAL ARTICLE 25 January 2021 Pages: 449 - 463

    

31. Global sensitivity analysis of riveting parameters based on a random sampling-high dimensional model representation

    • Junqing Yin
    • Jinyu Gu
    • Feng Zhang

    ORIGINAL ARTICLE 26 January 2021 Pages: 465 - 472

    

32. Rotary ultrasonic-assisted abrasive flow finishing and its fundamental performance in Al6061 machining

    • Qiuyan Wang
    • Moiz Sabbir Vohra
    • Swee Hock Yeo

    ORIGINAL ARTICLE 26 January 2021 Pages: 473 - 481

    

33. Effects of forming parameters on the forming limit of single-point incremental forming of sheet metal

    • Chunjian Su
    • Shipeng Lv
    • Sumin Guo

    ORIGINAL ARTICLE 26 January 2021 Pages: 483 - 501

    

34. WAAM process for metal block structure parts based on mixed heat input

    • Junyi Cui
    • Lei Yuan
    • Zengxi Pan

    ORIGINAL ARTICLE 26 January 2021 Pages: 503 - 521

    

35. Study on hydrogen behaviors around micropores within heavy forging during heating process

    • Junkai Fan
    • Bo Peng
    • Wu Zhao

    ORIGINAL ARTICLE 26 January 2021 Pages: 523 - 533

    

36. Multi-phase modeling of SiC particle removal mechanism in ultrasonic vibration–assisted scratching of SiCp/Al composites

    • Wei Zheng
    • Da Qu
    • Guochao Qiao

    ORIGINAL ARTICLE 26 January 2021 Pages: 535 - 551

    

37. Inducement of residual stresses in WC-5%Co cutting inserts by plunge-face grinding

    • Dennis Coelho Cruz
    • André Luis Christoforo
    • Carlos Eiji Hirata Ventura

    ORIGINAL ARTICLE 27 January 2021 Pages: 553 - 563

    

38. A lean approach to address material losses: materials cost deployment (MaCD)

    • Marcello Braglia
    • Mosè Gallo
    • Leonardo Marrazzini

    ORIGINAL ARTICLE 27 January 2021 Pages: 565 - 584

    

39. An efficient short-time Fourier transform algorithm for grinding wheel condition monitoring through acoustic emission

    • Wenderson N. Lopes
    • Pedro O. C. Junior
    • Eduardo C. Bianchi

    ORIGINAL ARTICLE 27 January 2021 Pages: 585 - 603

    

40. A novel investigation into edge effect reduction of 4340 steel spur gear during induction hardening process

    • Mahyar Parvinzadeh
    • Sasan Sattarpanah Karganroudi
    • Mohamed Khalifa

    ORIGINAL ARTICLE 26 January 2021 Pages: 605 - 619

    

41. Retraction Note: Development and application of copper–nickel zirconium diboride as EDM electrodes manufactured by selective laser sintering

    • Tiago Czelusniak
    • Fred L. Amorim
    • Camila F. Higa

    Retraction Note 17 January 2021 Pages: 621 - 621