Metallography, Microstructure, and Analysis - Free Editor's Choice Articles

2023

Evolution of L12 Ordered Precipitates in Cu–Fe–Si Alloy System and Its Influence on Potential Strength–Conductivity Properties

In Situ Alloying through Laser-Powder Bed Fusion of a 60%Inconel718-40%Cu Powders Mixture

Nano-Dimensional Elements in the Structure of Zinc Subjected to KOBO Extrusion

Investigation of Anisotropic Properties of Al 5052 Alloy Deformed by Cryorolling and Cryo-cross Rolling

Microstructural Analysis and Integrity of Drilling Surfaces on Titanium Alloy (Ti–6Al–4V) Using Heat-Sink-Based Cryogenic Cooling

Alternative Reagent for Revealing the Entire Microstructure of Additive Manufactured Ti–6Al–4V Alloy

2022

Microstructural Development in Inconel 718 Nickel-Based Superalloy Additively Manufactured by Laser Powder Bed Fusion

Effect of Casting Thickness on the Solidification Characteristics and Microstructural Parameters of Near-Eutectic Al-Si Alloy Produced by Ablation Casting Process

Comparative Study of Microstructure and Properties of Hypoeutectic Al-Si Alloys Being Cast With and Without Melt Thermal Treatment

Precipitation Characteristics of HPVDC AlSi10Mg0.3Mn Alloy Under Different Temper Conditions

Effect of Cooling Rate on Phase Transformation Kinetics and Microstructure of Nb–Ti Microalloyed Low Carbon HSLA Steel

Recrystallization, Grain Growth, and Color Etching to Design an Artistic Microstructure in Cartridge Brass (C26000)

2021

Microstructure Evolution and Thermal Stability of AZ31 Alloy Deformed by Multi-Pass DSR

Microstructural Evaluation of Copper Brazed Joints Using Silver-Based Filler Metal

Development of an Oxidation Contrast Method for Pearlite Colony Revelation in Eutectoid Steels

Microstructure and Mechanical Properties of Nb-API X70 Low Carbon Steel

EBSD Analysis of Blocky Structures in Hardened and Tempered Microstructures of a 5 wt.% Cr Cold Work Tool Steel

Effect of Strain Rate on Mechanical Behavior and Microstructure Evolution of Ti-Based T110 Alloy

2020

Effect of Niobium Addition on Microstructure and Mechanical Properties of Fe–7Al–0.35C Low-Density Steel

Phase Transformations in γ-Aluminide, Ti–46.5Al–xNb–yCr–zMo–0.3B (x = 3.5, 5; y, z = 0, 1, 2; y + z = 2) Alloys

Substructure Formation, Texture, and Mechanical Behavior of Warm Rolled 2205-Type Duplex Stainless Steel

Segmentation of Lath-Like Structures via Localized Identification of Directionality in a Complex-Phase Steel

The Nineteenth-Century Molyneux’s Boat: Archaeometallurgical Perspective of its Metal Fastenings

Microstructure and Tensile Properties of Cost-Efficient Thermally Hardenable α + β Alloys of Ti–Al–Mo–Fe and Ti–Al–Mo–Cr Systems
 

2019

Metallographic Studies of Dissimilar Al-Cu Laser-Welded Joints Using Various Etchants

Effects of Plastic Stress on Transformation Plasticity and Microstructure of a Carbide-Free Bainite Steel

EBSD Analysis of the Primary Austenite Grains in Lamellar Graphite Cast Iron

Effect of Cooling Rate on the Microstructure of a Pressure Vessel Steel

Visualization and Observation of Morphological Peculiarities of Twin Formation in Mg-Based Samples After Electrically Assisted Forming

2018

Bainite Transformation Characteristics of High-Si Hypereutectoid Bearing Steel

A Metallographic Review of 3D Printing/Additive Manufacturing of Metal and Alloy Products and Components

Effect of Hot Isostatic Pressing and Powder Feedstock on Porosity, Microstructure, and Mechanical Properties of Selective Laser Melted AlSi10Mg

Graphite Formation and Dissolution in Ductile Irons and Steels Having High Silicon Contents: Solid-State Transformations

Oxidation Behavior of Tungsten Carbide-6% Cobalt Cemented Carbide
 

2017

Application of Color Metallography to Study the Microstructure of Friction Stir-Welded Dual-Phase Brass Using Various Etchants

On the Precipitation of Intermetallic Compounds in Selected Solid-Solution-Strengthened Ni-Base Alloys and Their Effects on Mechanical Properties

Determination of Mo-Rich Laves-Phase in Weld Metals of a Creep-Resistant 9% Cr-Steel Using Light Optical Microscopy

Industrial Sintering Response and Microstructural Characterization of Aluminum Powder Metallurgy Alloy Alumix 123

Delineation of Prior Austenite Grain Boundaries in a Low-Alloy High-Performance Steel

2016

A two-tilt analysis of electron-diffraction patterns from transition-iron-carbide precipitates formed during tempering of 4340 steel

Quantification of Dendritic Austenite After Interrupted Solidification in a Hypoeutectic Lamellar Graphite Iron

A Comparative Study on Tensile and Fracture Behavior of Al–Mg Alloy Processed Through Cryorolling and Cryo Groove Rolling

Qualifying Electrically Conductive Cold Embedding-Media for Scanning Electron Microscopy

Hot Forging of IN718 with Solution-Treated and Delta-Containing Initial Microstructures

2015

Study of Coarsening in γ′ Precipitates by Diffusion Couples

Microstructure and Mechanical Properties of a TRIP-Aided Martensitic Steel

Microstructure and Carburization Detection in HP Alloy Pyrolysis Tubes

The Brass Nails of the Akko Tower Wreck (Israel): Archaeometallurgical Analyses

Microstructure Characterization of Single and Multipass 13Cr4Ni Steel Welded Joints