1. Tribological and Corrosion Behaviors of 304L and 317L Stainless Steel Coatings for Mechanical Parts Subjected to Friction and Wear

   • Khaled Chemaa
   • Mohamed Kezrane
   • Sofiane Haireche

   Technical Article 31 March 2022 Pages: 7785 - 7794

   

2. Improving Corrosion Resistance of 3Ni Weathering Steel in Simulated Tropical Marine Atmosphere via Changing Microstructure

   • Weijian Yang
   • Wei Liu
   • Yonggang Zhao

   Technical Article 12 April 2022 Pages: 7795 - 7807

   

3. An Assessment of Microstructure and Tensile Behavior of Magnetically Impelled Arc Butt Welded AISI 409 Ferritic Stainless Steel Tubes

   • I. Dinaharan
   • T. Muthu Krishnan
   • R. Palanivel

   Technical Article 24 March 2022 Pages: 7808 - 7819

   

4. Microstructures and Mechanical Properties of FeNiCrMnAl High-Entropy Alloys

   • Xicong Ye
   • Weiquan Xu
   • Dong Fang

   Technical Article 28 March 2022 Pages: 7820 - 7829

   

5. Investigation of the Damage Mechanism of CrN and Diamond-Like Carbon Coatings on Precipitation-Hardened and Duplex-Treated X42Cr13/W Tool Steel by 3D Scratch Testing

   • Shiraz Ahmed Siddiqui
   • Gregory Favaro
   • Maria Berkes Maros

   Technical Article Open access 28 March 2022 Pages: 7830 - 7842

   

6. Effect of Delamination on Ductile Fracture during the Impact Test in Ultra-Heavy Steel

   • Hongtao Wang
   • Yong Tian
   • Guodong Wang

   Technical Article 29 March 2022 Pages: 7843 - 7855

   

7. The Wet–Dry Cycling Corrosion Behavior of Low-Carbon Medium Manganese Steel Exposed to a 3.5% NaCl Solution Environment

   • Guanqiao Su
   • Cansheng Yu
   • Zhengyi Jiang

   Technical Article 29 March 2022 Pages: 7856 - 7869

   

8. Effects of High- and Low-Frequency Coupled Square Wave Pulses on TiC/Al₂O₃ Microarc Oxidation Coatings on 6063 Aluminum Alloy

   • Yupeng Guo
   • Jian Chen
   • Xiaofeng Lu

   Technical Article 25 April 2022 Pages: 7870 - 7880

   

9. Effect of Carbon on the Microstructures and Mechanical Properties of a Ni-Based Superalloy with High W Content

   • Kuo Jiang
   • Naicheng Sheng
   • Xiaofeng Sun

   Technical Article 11 April 2022 Pages: 7881 - 7891

   

10. Short-Term Corrosion Characteristic of Q235 Steel under Different Atmospheric Environments of Hunan

    • Xuankai Wang
    • Jun Wang
    • Fucheng Yin

    Technical Article 05 April 2022 Pages: 7892 - 7905

    

11. Research on the Influence of the Load Direction and the Cross-Section Shape on the Young's Modulus of Elements Produced by the Fused Deposition Modeling Method

    • Michał Bembenek
    • Łukasz Kowalski
    • Szymon Bajda

    Technical Article 04 April 2022 Pages: 7906 - 7912

    

12. A Novel Hypoeutectic High-Entropy Alloy CrFe₂Ni₂Mo_0.3Nb_0.25 with High Tensile Strength and Good Ductility

    • Wandong Wu
    • Weizhong Liang
    • Zhiliang Ning

    Technical Article 13 April 2022 Pages: 7913 - 7920

    

13. Microstructure and Properties of Vacuum-Brazed Joints of 3D-Structured Ni718 High-Temperature Alloy Prepared by Selective Laser Melting

    • Nan Song
    • Haichuan Shi
    • Zhongwen Li

    Technical Article 13 April 2022 Pages: 7921 - 7934

    

14. Effect of Long-Term Pre-oxidation on the Corrosion Rate of 316L Stainless Steel in a High-Temperature Water Environment

    • Xi Huang
    • Xiaoyan Li
    • Zhenghe Li

    Technical Article 14 April 2022 Pages: 7935 - 7944

    

15. Structural Evolution in Thin Films of Ag₂Te_1−xSe_x (x~0.3) Alloy Prepared by Thermal Evaporation Technique

    • Shubhendra Gupta
    • Mukesh Kr. Chowrasia
    • M. K. Banerjee

    Technical Article 11 April 2022 Pages: 7945 - 7954

    

16. Laser Sintered Ti-6Al-4V Alloy Coated with Plasma Electrolytic Oxidation: Influence of Duty Cycle and Frequency on Morphological, Structural, and Corrosion Properties

    • C. Premchand
    • E. Lokeshkumar
    • N. Rameshbabu

    Technical Article 24 March 2022 Pages: 7955 - 7963

    

17. Influence of Thermomechanical Processing on Microstructure and Mechanical Properties of MoNbTaW Refractory High-Entropy Alloy

    • Anjali Kanchi
    • Koteswararao V. Rajulapati
    • Ravi C. Gundakaram

    Technical Article 11 April 2022 Pages: 7964 - 7972

    

18. Effects of Laser Shock Peening on Surface Roughness and Residual Stress of AA 7050-T7451

    • Michele Angelo Attolico
    • Claudia Barile
    • David Osman Busse

    Technical Article Open access 08 April 2022 Pages: 7973 - 7988

    

19. The Role of Microstructure Inhomogeneity in Ti-6Al-4V Forging on Fracture Toughness Behavior

    • Anish Ranjan
    • Jyoti S. Jha
    • Sushil K. Mishra

    Technical Article 27 April 2022 Pages: 7989 - 8003

    

20. Microstructure and Mechanical Properties of Ti-Alloyed Supermartensitic 12%Cr Stainless Steel Classes 95 ksi and 110 ksi for Oil and Gas Production

    • S. S. M. Tavares
    • A. R. Pimenta
    • L. Malet

    Technical Article 18 April 2022 Pages: 8004 - 8012

    

21. In Situ x-ray Diffraction Study of the Deformation of an AISI 316L Stainless Steel Produced by Laser Powder Bed Fusion

    • Leticia F. Starck
    • Kahl D. Zilnyk
    • Osvaldo M. Cintho

    Technical Article 11 April 2022 Pages: 8013 - 8026

    

22. Effect of the Addition of a Buffer Gas during Pulsed Plasma-Chemical Synthesis on the Structural and Morphological Characteristics of Cu_xO_y@SiO₂ and Cu_xO_y@TiO₂ Nanocomposites

    • Galina Kholodnaya
    • Denis Ponomarev
    • Olga Lapteva

    Technical Article 11 April 2022 Pages: 8027 - 8037

    

23. Nanocomposite Coatings and Electrochemical Corrosion Behavior of TZAV-30 Titanium Alloy in Simulated Body Fluid Solution

    • K. Y. Liu
    • S. X. Liang
    • Z. G. Xing

    Technical Article 08 April 2022 Pages: 8038 - 8046

    

24. Defect-Correlated Vickers Microhardness of Al-Si-Mg Alloy Manufactured by Laser Powder Bed Fusion with Post-process Heat Treatments

    • Emanuela Cerri
    • Emanuele Ghio
    • Giovanni Bolelli

    Technical Article Open access 22 April 2022 Pages: 8047 - 8067

    

25. Digital Prognosis of Fatigue Residual Life of Lightweight Metallic Materials

    • Yali Yang
    • Hao Chen
    • Jie Shen

    Technical Article 30 March 2022 Pages: 8068 - 8083

    

26. Theoretical Calculation and Performance Analysis of Four-Element Metal Nitride Coatings Based on First Principles

    • Zhaopeng Hao
    • Wencang Fu
    • Yuan Qiu

    Technical Article 31 March 2022 Pages: 8084 - 8093

    

27. Microstructure Simulation and Experiment for the Weak Weld Joint of a Domed Storage Tank during an Explosion Based on the Cellular Automaton Method

    • Li Chang
    • Zhang Dacheng
    • Han Xing

    Technical Article 28 March 2022 Pages: 8094 - 8112

    

28. Experimental Investigation and Numerical Simulation of Residual Stress and Distortion of Ti6Al4V Components Manufactured Using Selective Laser Melting

    • Shuang Gao
    • Zhijun Tan
    • Bo He

    Technical Article 11 April 2022 Pages: 8113 - 8123

    

29. Constitutive and Artificial Neural Network Modeling to Predict Hot Deformation Behavior of CoFeMnNiTi Eutectic High-Entropy Alloy

    • Reliance Jain
    • Priyanka Umre
    • Sumanta Samal

    Technical Article 06 April 2022 Pages: 8124 - 8135

    

30. Study of High-Temperature Low-Cycle Fatigue Behavior and a Unified Viscoplastic-Damage Model for Heat-Resistant Cast Iron

    • Zhenxing Wu
    • Xuedong Chen
    • Heng Jiang

    Technical Article 22 March 2022 Pages: 8136 - 8147

    

31. Fabrication and Experimental Study of Micro-gripper with Electrothermal Actuation by Stereolithography Method

    • Osman Ulkir
    • Ishak Ertugrul
    • Salih Ozer

    Technical Article 18 April 2022 Pages: 8148 - 8159

    

32. Modelling of Porous Titanium and Understanding Its Mechanical Behavior Using Micro-Computed Tomography

    • Rajdeep Bhattacharyya
    • Masud Rana
    • Amit Roy Chowdhury

    Technical Article 04 April 2022 Pages: 8160 - 8168

    

33. Comparison of Five Different Models Predicting the Hot Deformation Behavior of EA4T Steel

    • Jie Bai
    • Yuanming Huo
    • Xiangyang Du

    Technical Article 30 March 2022 Pages: 8169 - 8182

    

34. A New Constitutive Model for 7055 Aluminum Alloy

    • Yong Shao
    • Qihang Liu
    • Shujin Chen

    Technical Article 11 April 2022 Pages: 8183 - 8198

    

35. Microstructure and Mechanical Properties of Active Gas Arc Welding between 304 Austenitic Stainless Steel and Q235B Low Carbon Steel

    • Jihua Liu
    • Xinghao Li
    • Zhibiao Xu

    Technical Article 23 March 2022 Pages: 8199 - 8209

    

36. Tribological Behavior of 42CrMo Steel Under Grease Lubrication with Ti₃C₂ as an Additive

    • Kaipeng Zhang
    • Zhao Peng
    • Qipeng Huang

    Technical Article 25 March 2022 Pages: 8210 - 8225

    

37. The Influence of Heterogeneous Microstructure on Low-Cycle Fatigue Behavior in NiCrMoV Welded Joint

    • Jiangkun Ma
    • Jingchao Wang
    • Fenggui Lu

    Technical Article 27 April 2022 Pages: 8226 - 8238

    

38. Investigation on Thermomechanical Field Distribution by Various Electrothermal Modes for Wide Magnesium Alloy Foil

    • Lipo Yang
    • Gengliang Liu
    • Hailong Zhang

    Technical Article 23 March 2022 Pages: 8239 - 8249

    

39. Microstructure and Fatigue Properties of Ti-48Al Alloy Fabricated by the Twin-Wire Plasma Arc Additive Manufacturing

    • Xi Zhang
    • Qinghua Lu
    • Xueming Hua

    Technical Article 07 April 2022 Pages: 8250 - 8260

    

40. Effect of Coating Thickness on Wetting Behavior of Nickel-Coated Alumina by Molten Aluminum

    • Qiangang Xu
    • Hao Lin
    • Hanlin Liu

    Technical Article 06 April 2022 Pages: 8261 - 8269

    

41. Mechanical Properties Evaluation and Parametric Optimization of Atmospheric Plasma Spray NiTi Coating

    • B. Swain
    • S. Chatterjee
    • A. Behera

    Technical Article 07 April 2022 Pages: 8270 - 8284

    

42. Preparation of Ni45 Alloy Coating with Directional Structure and its Wear Resistance

    • Xiaotian Yang
    • Xinhua Wang
    • Wensheng Li

    Technical Article 04 April 2022 Pages: 8285 - 8293

    

43. Effect of Ti on the Microstructure and Mechanical Properties of AlCrFeNiTi_x Eutectic High-Entropy Alloys

    • Songyuan Li
    • Feida Chen
    • Ping Huang

    Technical Article 31 March 2022 Pages: 8294 - 8303

    

44. Fatigue Properties of Rolled Steel Sheets for Automotive Structure

    • Tae-Ung Song
    • Je-Sik Shin
    • Chang-Yeol Jeong

    Technical Article 11 April 2022 Pages: 8304 - 8313

    

45. Cyclic Deformation Behavior and Failure Mechanism of 316LN Stainless Steel under Creep-Fatigue Loading at 550 °C

    • Jingwei Zhao
    • Bingbing Li
    • Xu Chen

    Technical Article 08 April 2022 Pages: 8314 - 8326

    

46. Effects of Heat Treatment on the Mechanical Behavior of Udimet 720 Nickel-Based Superalloy

    • Yu Sik Kong
    • Muralimohan Cheepu
    • Dong Gyu Kim

    Technical Article 11 April 2022 Pages: 8327 - 8333

    

47. Synthesis of Nitrogen-Doped Diamond-Like Carbon Films Produced by Plasma-Enhanced Chemical Vapor Deposition and their Tribocorrosion Behavior in Hanks’ Solution

    • Jianfang Sun
    • Yongtao Tang
    • Fenghua Su

    Technical Article 17 May 2022 Pages: 8334 - 8345

    

48. The Recovery Behavior of AZ31B Magnesium Alloy Stimulated by Electropulsing Treatment and Heat Treatment

    • Meng Zhang
    • Wenyang Wang
    • Hongwei Zhao

    Technical Article 12 August 2022 Pages: 8346 - 8354

    

49. Effects of High Ambient Temperature and Surface Quality on Tribological Properties of Si₃N₄

    • Songhua Li
    • Chao Wei
    • Chuanzhen Yan

    Technical Article 26 April 2022 Pages: 8355 - 8364

    

50. Multiaxial Creep Deformation and Influence of Different Precipitates on Creep Cavitation Failure of 304HCu SS

    • Kanhu Charan Sahoo
    • Parameswaran Padmanabhan
    • Kinkar Laha

    Technical Article 05 July 2022 Pages: 8365 - 8388