1. The 73rd World Foundry Congress

   • Natalia Sobczak
   • Rajiv Asthana

   Guest Editorial 11 July 2019 Pages: 3817 - 3818

2. The Effect of Boron Content on Wetting Kinetics in Si-B Alloy/h-BN System

   • Wojciech Polkowski
   • Natalia Sobczak
   • Ivan Kaban

   OriginalPaper Open access 06 December 2018 Pages: 3819 - 3825

   

3. Influence of Melt-Pouring Temperature and Composition of Primary Coating of Shell Mold on Tensile Strength and Creep Resistance of Ni-Based Superalloy

   • Łukasz Rakoczy
   • Małgorzata Grudzień
   • Rafał Cygan

   OriginalPaper Open access 04 January 2019 Pages: 3826 - 3834

   

4. Deformation Behavior of Pure Copper Castings with As-Cast Surfaces for Electrical Parts

   • Ikuzo Goto
   • Setsuo Aso
   • Jun-ichi Shionoya

   OriginalPaper 17 January 2019 Pages: 3835 - 3843

   

5. Microstructure and Hardness Evolution in Haynes 282 Nickel-Based Superalloy During Multi-variant Aging Heat Treatment

   • Adelajda Polkowska
   • Wojciech Polkowski
   • Robert M. Purgert

   OriginalPaper Open access 23 January 2019 Pages: 3844 - 3851

   

6. Fabrication of Al-Based Composites by Centrifugal Mixed-Powder Method and Their Application for Grinding Wheels

   • Yoshimi Watanabe
   • Takayasu Sugiura
   • Hideaki Tsuge

   OriginalPaper 19 February 2019 Pages: 3852 - 3863

   

7. Mechanical Performance of Nodular Cast Irons After Prolonged High-Temperature Exposure

   • Alessandro Morri
   • Lorella Ceschini
   • Stefano Masaggia

   OriginalPaper 04 March 2019 Pages: 3864 - 3877

   

8. Morphological Evolution of Mg-Al-La-Ca Alloy Induced by a Mechanical Stirring Process

   • Sérgio Luiz Telles Bartex
   • Lírio Schaeffer
   • Vinicius Karlinski de Barcellos

   OriginalPaper 15 February 2019 Pages: 3878 - 3886

   

9. Gating System Design Optimization for Investment Casting Process

   • Marek Bruna
   • Dana Bolibruchová
   • Anna Remišová

   ReviewPaper 12 February 2019 Pages: 3887 - 3893

   

10. Application of Selected Artificial Intelligence Methods in a System Predicting the Microstructure of Compacted Graphite Iron

    • Barbara Mrzygłód
    • Grzegorz Gumienny
    • Krzysztof Regulski

    OriginalPaper Open access 19 February 2019 Pages: 3894 - 3904

    

11. Environmentally Friendly Foundry Molding and Core Sands

    • K. Major-Gabryś

    ReviewPaper Open access 21 February 2019 Pages: 3905 - 3911

    

12. High-Temperature Interaction of Liquid Gd with Y₂O₃

    • P. Turalska
    • N. Sobczak
    • N. Mattern

    OriginalPaper Open access 05 March 2019 Pages: 3912 - 3921

    

13. Geometric Form of Gating System Elements and Its Influence on the Initial Filling Phase

    • Rafał Dojka
    • Jan Jezierski
    • Niels Skat Tiedje

    OriginalPaper Open access 11 March 2019 Pages: 3922 - 3928

    

14. Electromagnetic Method to Control the Solidification of Al99.99

    • Marcela Pokusová
    • Marta Murgašová
    • Alena Pribulová

    OriginalPaper 08 March 2019 Pages: 3929 - 3934

    

15. Development of a Squeeze Semisolid High-Pressure Die Casting Process for Magnesium Structural Parts

    • Iban Vicario
    • Iñigo Crespo
    • Jon Mikel Sanchez

    OriginalPaper 12 March 2019 Pages: 3935 - 3940

    

16. Modeling and Computation of Casting Process by Particle Method

    • Masaki Kazama
    • Tamon Suwa
    • Yasuhiro Maeda

    OriginalPaper 14 March 2019 Pages: 3941 - 3949

    

17. The Effect of Surface Condition on Wetting of HASTELLOY^® X by Brazing Filler Metal of Ni-Pd-Cr-B-Si System

    • Michał Baranowski
    • Mariusz Bober
    • Natalia Sobczak

    ReviewPaper Open access 15 April 2019 Pages: 3950 - 3959

    

18. Indicator W_so: A New Parameter for Characterization of Protective Coating Efficiency Against Humidity

    • Natalia Kaźnica
    • Jerzy Zych

    OriginalPaper Open access 23 April 2019 Pages: 3960 - 3965

    

19. Quality Assessment of Al Castings Produced in Sand Molds Using Image and CT Analyses

    • Lenka Kuchariková
    • Eva Tillová
    • Ivana Švecová

    OriginalPaper 03 May 2019 Pages: 3966 - 3973

    

20. The Influence of Shell Mold Composition on the As-cast Macro- and Micro-structure of Thin-Walled IN713C Superalloy Castings

    • Łukasz Rakoczy
    • Małgorzata Grudzień-Rakoczy
    • Rafał Cygan

    OriginalPaper Open access 23 May 2019 Pages: 3974 - 3985

    

21. Main Directions of Recent Works on Al-Zn-Based Alloys for Foundry Engineering

    • P. K. Krajewski
    • A. L. Greer
    • W. K. Krajewski

    OriginalPaper Open access 26 April 2019 Pages: 3986 - 3993

    

22. Development of Mathematical Relationships for Calculating Material-Dependent Flowability of Green Molding Sand

    • Dheya Abdulamer
    • Abdulkader Kadauw

    OriginalPaper 17 May 2019 Pages: 3994 - 4001

    

23. Influence of Ti and REE on Primary Crystallization and Wear Resistance of Chromium Cast Iron

    • Malwina Dojka
    • Rafał Dojka
    • Andrzej Studnicki

    OriginalPaper Open access 16 May 2019 Pages: 4002 - 4011

    

24. Determination of the Charge Materials Range in Multistage Charge Burden Optimization for Foundry Furnaces

    • Eugeniusz Ziółkowski
    • Kamil Schmalenberg

    OriginalPaper Open access 24 June 2019 Pages: 4012 - 4017

25. Modeling of the Kinetics of Carbonitride Precipitation Process in High-Strength Low-Alloy Steels Using Cellular Automata Method

    • Przemysław Marynowski
    • Henryk Adrian
    • Mirosław Głowacki

    OriginalPaper Open access 28 June 2019 Pages: 4018 - 4025

    

26. Determination of Gray Cast Iron Age Strengthening by Nondestructive Methods: Effect of Alloying Elements

    • Vaucheret Alexis
    • Rossi Frédéric
    • Albertalli Eric

    OriginalPaper 02 July 2019 Pages: 4026 - 4033

    

27. Effect of Nickel Content on Microstructural Evolution in Austempered Solution-Strengthened Ferritic Ductile Cast Iron

    • Tatsuya Tokunaga
    • Yeong-Jin Kim
    • Hidenori Era

    OriginalPaper 05 July 2019 Pages: 4034 - 4040

    

28. Corrosion Behavior of Annealed Steels with Different Carbon Contents (0.002, 0.17, 0.43 and 0.7% C) in Freely Aerated 3.5% NaCl Solution

    • Prvan Kumar Katiyar
    • S. Misra
    • K. Mondal

    OriginalPaper 26 June 2019 Pages: 4041 - 4052

    

29. Effect of Sulfide Concentration on the Corrosion and Cavitation Erosion Behavior of a Manganese-Aluminum Bronze in 3.5% NaCl Solution

    • Q. N. Song
    • N. Xu
    • Y. X. Qiao

    OriginalPaper 26 June 2019 Pages: 4053 - 4064

    

30. Effect of Chemical Composition on the Microstructure and Tribological Properties of Sn-Based Alloys

    • B. Leszczyńska-Madej
    • M. Madej
    • J. Hrabia-Wiśnios

    OriginalPaper Open access 26 June 2019 Pages: 4065 - 4073

    

31. Effects of Holding Time on the Sintering of Cemented Tungsten Carbide Powder and Bonding with High-Strength Steel Wire

    • Mahadi Hasan
    • Jingwei Zhao
    • Zhengyi Jiang

    OriginalPaper 26 June 2019 Pages: 4074 - 4085

    

32. Microstructure and Corrosion Behavior of Cr Coating on M50 Steel Fabricated by Electrospark Deposition

    • Guojian Cao
    • Xu Zhang
    • Xinxin Ma

    OriginalPaper 27 June 2019 Pages: 4086 - 4094

    

33. Few-Layer Graphene Functionalized by Carbon Nanotubes and MnO₂ Nanoparticles for High-Performance Supercapacitors

    • Feng Qiu
    • Liyao Suo
    • Jun Chen

    OriginalPaper 26 June 2019 Pages: 4095 - 4101

    

34. Effects of Process Control Agents on Characteristics of Cu-Ta Nanocomposite during Milling and Subsequent Sintering

    • Roohollah Rahmanifard
    • Seyed Meysam Javidan
    • Mohsen Asadi Asadabad

    OriginalPaper 24 June 2019 Pages: 4102 - 4110

    

35. Effect of Cobalt Content on Thermal, Mechanical, and Microstructural Properties of Al_0.4FeCrNiCo_x (x = 0, 0.25, 0.5, 1.0 mol) High-Entropy Alloys

    • Saurav Kumar
    • Amar Patnaik
    • Vinod Kumar

    OriginalPaper 02 July 2019 Pages: 4111 - 4119

    

36. Improved Electrochemical Performance of Plasma Electrolytic Oxidation Coating on Titanium in Simulated Body Fluid

    • S. Ahmadnia
    • S. Aliasghari
    • M. Ghorbani

    OriginalPaper 27 June 2019 Pages: 4120 - 4127

    

37. Effect of Boron Addition on Creep Strain during Impression Creep of P91 Steel

    • Akhil Khajuria
    • Rajneesh Kumar
    • Raman Bedi

    OriginalPaper 24 June 2019 Pages: 4128 - 4142

    

38. Effect of Anisotropy on Microstructures and Mechanical Properties of Rolled Ti/Al/Mg/Al/Ti Laminates

    • Yujie Mi
    • Huihui Nie
    • Wei Liang

    OriginalPaper 28 June 2019 Pages: 4143 - 4151

    

39. Corrosion Behavior of Ta-10W Coatings on CP-Ti and TC4 Substrates

    • Pei Sun
    • Yi Gu
    • Baoshan Liu

    OriginalPaper 27 June 2019 Pages: 4152 - 4162

    

40. Oxidation Resistance of Ti-Al-Cr-Nb-Based High-Entropy Alloys in Air at 1073 K

    • Richard Gawel
    • Łukasz Rogal
    • Kazimierz Przybylski

    OriginalPaper Open access 27 June 2019 Pages: 4163 - 4170

    

41. Role of Titanium, Carbon, Boron, and Zirconium in Carbide and Porosity Formation during Equiaxed Solidification of Nickel-Based Superalloys

    • Eduardo Cortes
    • Arnoldo Bedolla-Jacuinde
    • Jorge Zuno

    OriginalPaper 02 July 2019 Pages: 4171 - 4186

    

42. Wear Regime and Wear Mechanism Map for Spark-Plasma-Sintered Cu-15Ni-8Sn-0.2Nb Alloy under Oil Lubrication

    • Jinjuan Cheng
    • Shizhong Zhang
    • Kechao Zhou

    OriginalPaper 03 July 2019 Pages: 4187 - 4196

    

43. Effect of Cobalt on the Microstructure and Corrosion Behavior of Martensitic Age-Hardened Stainless Steel

    • Wei Zhang
    • Xin Zhang
    • Chu Shen

    OriginalPaper 08 July 2019 Pages: 4197 - 4208

    

44. Effect of Preheating and Water Cooling on the Performance of Friction-Stir-Welded Aviation-Grade Aluminum Alloy Joints

    • Shubham Verma
    • Meenu Gupta
    • Joy Prakash Misra

    OriginalPaper 03 July 2019 Pages: 4209 - 4220

    

45. Influence of Temperature Variation on the Formation and Corrosion Protective Performance of Calcium Carbonate Deposits in Artificial Seawater

    • M. Izadi
    • A. Yazdiyan
    • H. Shahrabi

    OriginalPaper 05 July 2019 Pages: 4221 - 4233

    

46. Influence of Detwinning on the Shape Memory Effect in Ni₅₅Fe₁₈Ga₂₇ Single Crystals

    • Sergey Belyaev
    • Natalia Resnina
    • Alexey Sibirev

    OriginalPaper 05 July 2019 Pages: 4234 - 4240

    

47. Investigation on Microstructure and Mechanical Properties of TA10–Q245R Composite Plate Formed by Explosive Welding

    • Shaogang Wang
    • Xiaomin Han

    OriginalPaper 08 July 2019 Pages: 4241 - 4251

    

48. Effect of Heat Input on Microstructure, Residual Stress, and Corrosion Resistance of UNS 32101 Lean Duplex Stainless Steel Weld Joints

    • Naima Ouali
    • Khadidja Khenfer
    • Samuel Branchu

    OriginalPaper 08 July 2019 Pages: 4252 - 4264

    

49. In Situ Synthesis of 3D Interconnected Graphene-Reinforced Copper Composites

    • Jinzhang Li
    • Xiaohong Chen
    • Liangyan Zhao

    OriginalPaper 08 July 2019 Pages: 4265 - 4274

    

50. Ductile-to-Brittle Transition in Low-Alloy Steel: A Combined Experimental and Numerical Investigation

    • Tenneti Sharma
    • N. Naveen Kumar
    • V. Kain

    OriginalPaper 26 June 2019 Pages: 4275 - 4288