Metallurgical and Materials Transactions B - Free Access to Editor's Choice Articles
The papers listed below have been personally chosen by the Editors of Metallurgical and Materials Transactions as having special significance.
2024
Thermodynamics and Synthesis of AlN-Reinforced Mg Alloy Composites
Oxidation Kinetics and Mechanism of Boron in Metallurgical-Grade Silicon Melt by Oxidizing Refining
2023
Study of Flow and Heat Transfer in High Pressure Die Casting Cooling Channel
Lead Recovery From PbO Using Hydrogen as a Reducing Agent
Operation and Fundamentals of Direct Anode Copper Production From Matte
2022
Slag Flow in the Packed Bed With Varied Properties and Bed Conditions: Numerical Investigation
Study of an Industrial Scale Counter Pressure Casting Process Using an Advanced Thermal-Stress Model
Numerical Simulation of Decarburization Reaction with Oxygen Blowing During RH Refining Process
2021
Formation Mechanism of a Wide Face Longitudinal Off-corner Depression During Thick Slab Continuous Casting
A Dynamic Mixed-Control Model for BOF Metal–Slag–Gas Reactions
Effect of ionic structure on dissolution behavior of nickel in aluminosilicate slags
Effect of prior oxidation on the reduction behavior of magnetite-based iron ore in hydrogen-induced fluidized bed
Influence of grain refiners on the wettability of Al2O3 substrate by aluminum melt
Elucidation of gas formation effect on strong inhibition of magnetite dissolution in Cu2S through in-situ analysis of reactive interface
Multiphase Field Modeling of Dendritic Solidification of Low-Carbon Steel with Peritectic Phase Transition
Nucleation of SiO2-CaO-Al2O3 Slag in Oxidative Ladle Refining of Metallurgical Grade Silicon
Propagation of Input Uncertainties in Numerical Simulations of Laser Powder Bed Fusion
Electrochemical Methods for the Study of Liquid Metals: Highlights from Metallurgical Transactions
2020
Solidified Microstructure of Wear Resistant Fe-Cr-C-B Overlays
Hidden Phenomena during Transient Reaction Trajectories in Liquid Metals Processing
Recent Progress in Titanium Extraction and Recycling
Review of Peritectic Solidification Mechanisms and Effects in Steel Casting
A Review of Steel Processing Considerations for Oxide Cleanliness
Kinetic Modeling of Non-Metallic Inclusions Behavior in Molten Steel - A Review
Computational Thermodynamic Calculations: FactSage from CALPHAD Thermodynamic Database to Virtual Process Simulation
2019
Mechanisms and Kinetics of Reduction of Solid NiO in CO/CO2 and CO/Ar Gas Mixtures
Microstructure evolution during controlled solidification of "Fe2O3"-CaO-SiO2 liquids in air
MnS Precipitation Behavior of High Sulfur Microalloyed Steel under Sub-rapid Solidification Process
2018
Mathematical Investigation of Fluid Flow, Mass Transfer, and Slag-steel Interfacial Behavior in Gas-stirred Ladles
Recovery of Platinum Group Metals from Spent Catalysts Using Iron Chloride Vapor Treatment
Effect of Direct Reduced Iron (DRI) on Dephosphorization of Molten Steel by Electric Arc Furnace Slag
Numerical Simulation of Bulging Deformation for Wide-thick Slab under Uneven Cooling Conditions
Thermodynamic Considerations of Direct Oxygen Removal from Titanium by Utilizing the Deoxidation Capability of Rare-Earth Metals
Simulator of Non-homogenous Alumina and Current Distribution in an Aluminum Electrolysis Cell to Predict Low-Voltage Anode Effects
Understanding the relationship between structure and thermophysical properties of CaO-SiO2-MgO-Al2O3 molten slags
Selective Extraction and Recovery of Nd and Dy from Nd−Fe−B Magnet Scrap by Utilizing Molten MgCl2
Evolution of Size and Chemical Composition of Copper Concentrate Particles Oxidized Under Simulated Flash Smelting Conditions
2017
Modeling and Simulation of the Off-Gas in an Electric Arc Furnace
Mold Simulator Study of Heat Transfer Phenomenon during the Initial Solidification in Continuous Casting Mold
On the Initial Rate of Fluid-Solid Reactions
Study on the Equilibrium between Liquid Iron and Calcium Vapor
On the capability of non-metallic inclusions to act as nuclei for acicular ferrite in different steel grades
The Dynamic Interfacial Oxygen Potential between Iron-Carbon Droplets and Oxidizing Slag
The Influence of Sulfur on Dephosphorization Kinetics between Bloated Metal Droplets and Slag Containing FeO
2016
Thermodynamics of Nitrogen in Fe-Mn-Al-Si-C Alloy Melts
Entropic Heat Effects in Aluminum Electrolysis Cells with Inert Anodes
Materials for a Non-Steady-State World
Effect of Amount of Carbon on the Reduction Efficiency of Iron Ore-Coal Composite Pellets in Multi-layer Bed Rotary Hearth Furnace (RHF)
Mg Doping Induced Effects on Structural, Optical, and Electrical Properties as Well as Cytotoxicity of CeO2 Nanostructures
Simultaneous Evaporation of Cu and Sn from Liquid Steel
Control of Crystal Morphology for Mold Flux During High-Aluminum AHSS Continuous Casting Process
Study of Shell-Mold Thermal Resistance: Laboratory Measurements, Estimation from Compact Strip Production Plant Data, and Observation of Simulated Flux-Mold Interface
Digitalizing the Circular Economy
Investigation of High-Temperature Slag/Copper/Spinel Interactions
A Model for Dissolution of Lime in Steelmaking Slags
2015
Morphology Control for Al2O3 Inclusion without Ca Treatment in High-Aluminum Steel
Improvement of Resistance of MgO Based Refractory to Slag Penetration by In Situ Spinel Formation
Hydrogen Embrittlement Understood
Electroreduction of Iron(III) Oxide Pellets to Iron in Alkaline Media: A Typical Shrinking-core Reaction Process
Measurement of Density of Fe-Co Alloys Using Electrostatic Levitation
Entropic Heat Effects in Aluminum Electrolysis Cells with Inert Anodes
2014
Removal of Vanadium from Molten Aluminum - Part III. Analysis of Industrial Boron Treatment Practice
Large Eddy Simulations of Double-Ruler Electromagnetic Field Effect on Transient Flow during Continuous Casting
Stress-Induced Grain Growth in an Ultra-fine Grained Al Alloy
Surface Tension Measurements of Calcia-Alumina Slags -- A Comparison of Dynamic Methods
Effect of Ca on the Behavior of Double Oxide Film Defects in Commercially Pure Aluminum Melt
2013
Highly Anisotropic Steel Processed by Selective Laser Melting
Effect of Silicon on the Desulfurization of Al-killed Steels - Part II. Experimental Results and Plant Trials
Quasi-chemical Viscosity Model for Fully Liquid Slag in the
Al2O3-CaO-MgO-SiO2 System, Part I: Revision of the Model
Thermodynamic Analysis of the Cu-As-S-(O) System Relevant to Sulfuric Acid Baking of Enargite at 473 K (200 °C)
2012
Leaching Process Investigation of Secondary Aluminum Dross: The Effect of CO2 on Leaching Process of Salt Cake from Aluminum Remelting Process
Heat Transfer Phenomena across Mold Flux by Using the Infrared Emitter Technique
Crystallization Behavior of the CaO-Al2O3-MgO System Studied with a Confocal Laser Scanning Microscope
Effective Dissolution of Platinum by Using Chloride Salts in Recovery Process
Oxidation Studies of SiAlON/MgAlON Ceramics with Fe2O3 and Cao Impurities, Part II: Phase Evolution
Heat Transfer Phenomena across Mold Flux by Using the Infrared Emitter Technique