1. Texture Produced by Abnormal Grain Growth in Friction Stir-Welded Aluminum Alloy 1050

   • Sergey Mironov
   • Kunitaka Masaki
   • Hiroyuki Kokawa

   Communication 12 January 2013 Pages: 1153 - 1157

   

2. Discussion of “A Molecular Dynamics Simulation Study of the Cavitation Pressure in Liquid Al”

   • John Campbell

   Discussion 24 January 2013 Pages: 1158 - 1158

3. Statistical Analysis of the Influence of Some Trace Elements on Chunky Graphite Formation in Heavy Section Nodular Iron Castings

   • Jon Sertucha
   • Jacques Lacaze
   • Peio Larrañaga

   Communication 12 January 2013 Pages: 1159 - 1162

   

4. Foreword

   • A. K. Vasudevan
   • N. R. Moody
   • R. E. Ricker

   Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 19 December 2012 Pages: 1163 - 1163

5. Water Penetration—Its Effect on the Strength and Toughness of Silica Glass

   • Sheldon M. Wiederhorn
   • Theo Fett
   • Jean-Pierre Guin

   Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 08 September 2012 Pages: 1164 - 1174

   

6. Modified Kitagawa Diagram and Transition from Crack Nucleation to Crack Propagation

   • K. Sadananda
   • S. Sarkar

   Symposium: Environmental Damage in Structural Materials Under Static/Dynamic Loads at Ambient Temperature 22 September 2012 Pages: 1175 - 1189

   

7. Failure Diagram and Chemical Driving Forces for Subcritical Crack Growth

   • K. Sadananda

   Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 17 October 2012 Pages: 1190 - 1199

   

8. Environmental Crack Driving Force

   • M. M. Hall Jr.

   Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 27 November 2012 Pages: 1200 - 1208

9. Mechanisms and Kinetics of Environmentally Assisted Cracking: Current Status, Issues, and Suggestions for Further Work

   • S. P. Lynch

   Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 12 September 2012 Pages: 1209 - 1229

   

10. Stress Corrosion Cracking in Al-Zn-Mg-Cu Aluminum Alloys in Saline Environments

    • N. J. Henry Holroyd
    • G. M. Scamans

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 27 November 2012 Pages: 1230 - 1253

    

11. Applied Stress Affecting the Environmentally Assisted Cracking

    • A. K. Vasudevan

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 15 January 2013 Pages: 1254 - 1267

    

12. Evolution of Grain Boundary Precipitates in Al 7075 Upon Aging and Correlation with Stress Corrosion Cracking Behavior

    • Ramasis Goswami
    • Stanley Lynch
    • Ronald L. Holtz

    Symposium: Environmental Damage in Structural Materials Under Static/Dynamic Loads at Ambient Temperature 28 September 2012 Pages: 1268 - 1278

    

13. Transmission Electron Microscopic Investigations of Grain Boundary Beta Phase Precipitation in Al 5083 Aged at 373 K (100 °C)

    • Ramasis Goswami
    • Ronald L. Holtz

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 30 May 2012 Pages: 1279 - 1289

    

14. Studies of Evaluation of Hydrogen Embrittlement Property of High-Strength Steels with Consideration of the Effect of Atmospheric Corrosion

    • Eiji Akiyama
    • Maoqiu Wang
    • Kaneaki Tsuzaki

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 29 September 2012 Pages: 1290 - 1300

    

15. Fatigue Crack Growth Analysis Under Spectrum Loading in Various Environmental Conditions

    • S. Mikheevskiy
    • G. Glinka
    • E. Lee

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 04 January 2013 Pages: 1301 - 1310

    

16. Effects of NaCl, pH, and Potential on the Static Creep Behavior of AA1100

    • Quanhe Wan
    • David J. Quesnel

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 10 October 2012 Pages: 1311 - 1319

    

17. Fatigue Crack Growth under High Pressure of Gaseous Hydrogen in a 15-5PH Martensitic Stainless Steel: Influence of Pressure and Loading Frequency

    • Z. Sun
    • C. Moriconi
    • G. Henaff

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 03 April 2012 Pages: 1320 - 1330

    

18. Hydrogen Embrittlement Behavior of 430 and 445NF Ferritic Stainless Steels

    • Sun Mi Kim
    • Young Soo Chun
    • Chong Soo Lee

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 13 June 2012 Pages: 1331 - 1339

    

19. Environmental Crack Growth Behavior Affected by Thickness/Geometry Constraint

    • Daniel Kujawski

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 13 November 2012 Pages: 1340 - 1352

    

20. Chloride Ion Activity and Susceptibility of Al Alloys 7075-T6 and 5083-H131 to Stress Corrosion Cracking

    • R. E. Ricker
    • E. U. Lee
    • E. Lipnickas

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 10 November 2012 Pages: 1353 - 1364

    

21. Atomistic Investigation of the Role of Grain Boundary Structure on Hydrogen Segregation and Embrittlement in α-Fe

    • Kiran N. Solanki
    • Mark A. Tschopp
    • Nathan R. Rhodes

    Symposium: Environmental Damage in Structural Materials under Static/Dynamic Loads at Ambient Temperature 26 September 2012 Pages: 1365 - 1375

    

22. Evolution of Microstructures During Austempering of Ductile Irons Alloyed with Manganese and Copper

    • Ranjan Kumar Dasgupta
    • Dipak Kumar Mondal
    • Ajit Kumar Chakrabarti

    OriginalPaper 09 November 2012 Pages: 1376 - 1387

    

23. Effect of Aging on Microstructure and Shape Memory Properties of a Ni-48Ti-25Pd (At. Pct) Alloy

    • Taisuke T. Sasaki
    • B. Chad Hornbuckle
    • Gregory B. Thompson

    OriginalPaper 08 November 2012 Pages: 1388 - 1400

    

24. Phase Selection in Undercooled Ni-3.3 Wt Pct B Alloy Melt

    • Junfeng Xu
    • Feng Liu
    • Bo Dang

    OriginalPaper 10 November 2012 Pages: 1401 - 1408

    

25. An Epitaxial Model for Heterogeneous Nucleation on Potent Substrates

    • Zhongyun Fan

    OriginalPaper 08 November 2012 Pages: 1409 - 1418

    

26. Topologically Close-Packed μ Phase Precipitation in Creep-Exposed Inconel 617 Alloy

    • R. Krishna
    • S. V. Hainsworth
    • H. V. Atkinson

    OriginalPaper 27 November 2012 Pages: 1419 - 1429

    

27. Kinetics of Martensite Formation in Substitutional Fe-Al Alloys: Dilatometric Analysis

    • Yongchang Liu
    • Lifang Zhang
    • Eric Jan Mittemeijer

    OriginalPaper 10 November 2012 Pages: 1430 - 1440

    

28. Neural Networks Relating Alloy Composition, Microstructure, and Tensile Properties of α/β-Processed TIMETAL 6-4

    • Peter C. Collins
    • Santhosh Koduri
    • Hamish L. Fraser

    OriginalPaper 08 November 2012 Pages: 1441 - 1453

    

29. Influence of Microstructural Length Scale on the Strength and Annealing Behavior of Pearlite, Bainite, and Martensite

    • Xiang Wang
    • Hatem S. Zurob
    • David Embury

    OriginalPaper 08 November 2012 Pages: 1454 - 1461

    

30. Corrosion of Ga-doped Sn-0.7Cu Solder in Simulated Marine Atmosphere

    • Zhong Yan
    • Ai-Ping Xian

    OriginalPaper 10 November 2012 Pages: 1462 - 1474

    

31. Mass Transfer of Nickel-Base Alloy Covered Electrode During Shielded Metal Arc Welding

    • Renyao Qin
    • Guo He

    OriginalPaper 13 November 2012 Pages: 1475 - 1484

    

32. Morphology and Growth Kinetics of Straight and Kinked Tin Whiskers

    • Donald Susan
    • Joseph Michael
    • W. Graham Yelton

    OriginalPaper 25 October 2012 Pages: 1485 - 1496

    

33. Evolution of Texture and Microstructure in Commercially Pure Titanium with Change in Strain Path During Rolling

    • N. P. Gurao
    • S. Sethuraman
    • Satyam Suwas

    OriginalPaper 25 October 2012 Pages: 1497 - 1507

    

34. Effects of Particle Sizes on Sintering Behavior of 316L Stainless Steel Powder

    • Dong Yong Park
    • Shi W. Lee
    • Isamu Otsuka

    OriginalPaper 08 November 2012 Pages: 1508 - 1518

    

35. Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy

    • A. G. Rao
    • K. R. Ravi
    • B. P. Kashyap

    OriginalPaper 13 November 2012 Pages: 1519 - 1529

    

36. Development and Design of Binder Systems for Titanium Metal Injection Molding: An Overview

    • Guian Wen
    • Peng Cao
    • Neil Edmonds

    OriginalPaper 23 October 2012 Pages: 1530 - 1547

    

37. Wear Behavior at High Temperature of Dual-Particle Size Zircon-Sand-Reinforced Aluminum Alloy Composite

    • Suresh Kumar
    • Ranvir Singh Panwar
    • O. P. Pandey

    OriginalPaper 27 November 2012 Pages: 1548 - 1565

    

38. Texture Weakening Effects in Ce-Containing Mg Alloys

    • Jason P. Hadorn
    • Rupalee P. Mulay
    • Sean R. Agnew

    OriginalPaper 12 December 2012 Pages: 1566 - 1576

    

39. Hot Deformation of AA6082 Containing Fine Intermetallic Particles

    • Cecilia Poletti
    • Tomasz Wójcik
    • Christof Sommitsch

    OriginalPaper 23 October 2012 Pages: 1577 - 1586

    

40. Texture Evolution of Nanostructured Aluminum/Copper Composite Produced by the Accumulative Roll Bonding and Folding Process

    • Mohammad Reza Toroghinejad
    • Roohollah Jamaati
    • Jan Dutkiewicz

    OriginalPaper 09 November 2012 Pages: 1587 - 1598

    

41. Grain Growth in Multiple Scales of Polycrystalline AZ31 Magnesium Alloy by Phase-Field Simulation

    • Y. Wu
    • B. Y. Zong
    • M. T. Wang

    OriginalPaper 19 October 2012 Pages: 1599 - 1610

    

42. Strengthening Mechanisms in Mechanically Milled Oxide-Dispersed Iron Powders

    • R. Vijay
    • M. Nagini
    • G. Sundararajan

    OriginalPaper 07 November 2012 Pages: 1611 - 1620