1. Loose Abrasive Finishing of Parts Made of Powder Materials

   • V. A. Skryabin
   • A. E. Zverovshchikov

   COMBINED TREATMENT METHODS 19 March 2024 Pages: 1997 - 1999

   

2. Some Case Studies of Mine Support Biocorrosion in Underground Workings in Various Climatic Zones

   • R. E. Dashko
   • D. Yu. Vlasov
   • I. S. Romanov

   CORROSION: MATERIALS, PROTECTION 19 March 2024 Pages: 2000 - 2004

   

3. Estimation of Deformation Site Parameters for Symmetric and Asymmetric Rolling of a Strip Using Computer Simulation

   • A. V. Kozhevnikov
   • M. M. Skripalenko
   • V. S. Yusupov

   PLATE ROLLING 19 March 2024 Pages: 2005 - 2011

   

4. Effect of Remelting and Solidification Features on the Structure of Cast Fast-Cooled Ferrosilicon Inserts and Lump Ferrosilicon

   • D. A. Boldyrev
   • L. I. Popova
   • S. G. Prasolov

   FOUNDRY 19 March 2024 Pages: 2012 - 2021

   

5. Development of a Technology of Production of a Hafnium–Nickel Master Alloy in a Vacuum Arc Furnace for the Alloying of Cast Nickel Superalloys

   • P. G. Min
   • N. S. Pitelin
   • V. E. Vadeev

   FOUNDRY 19 March 2024 Pages: 2022 - 2029

   

6. Influence of the Parameters of a Modifier on the Structure Formation in Vermicular Graphite Iron in Camshaft Castings

   • D. A. Boldyrev
   • L. I. Popova

   FOUNDRY 19 March 2024 Pages: 2030 - 2035

   

7. Efficiency of an Alternative Silicon-Containing Material for Ironmaking

   • D. A. Boldyrev

   FOUNDRY 19 March 2024 Pages: 2036 - 2038

   

8. Thermal Analysis of the Influence of the Cast Iron Modification Parameters on the Solidification Parameters

   • D. A. Boldyrev

   FOUNDRY 19 March 2024 Pages: 2039 - 2044

   

9. Stability of Titanium Carbide Introduced into a Weldpool

   • N. V. Kobernik
   • A. S. Pankratov
   • A. G. Orlik

   PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2045 - 2053

   

10. Effect of Heat Treatment on the Structure and Properties of a D16 Aluminum Alloy

    • L. V. Kutepova
    • N. I. Volgina
    • S. S. Khlamkova

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2054 - 2058

    

11. Optimization of the Heat Treatment of a Hard Magnetic Fe–30Cr–16Co–1Sm Powder Alloy

    • I. M. Milyaev
    • A. I. Milyaev
    • E. V. Shuster

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2059 - 2064

    

12. Extraction of Platinum from Low-Concentration Refining Nitric Acid Solutions Using Electrolytic and Sulfide Precipitation

    • V. D. Gorbacheva
    • R. S. Sel’nitsyn

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2065 - 2069

    

13. Anomalously High Rates of Lead Consumption in Reaction Mixtures Containing Iodine, Hydrogen Peroxide, or Both Oxidants Simultaneously

    • S. D. Pozhidaeva
    • A. M. Ivanov
    • V. V. Tarasov

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2070 - 2076

    

14. On the Causes of the Formation of Rejected Silver Coatings

    • A. V. Isaev
    • V. V. Isaev
    • A. A. Bachaev

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2077 - 2082

    

15. Kinetic Laws of the Cathodic Deposition of a Tin–Bismuth Alloy and the Influence of Ultradispersed Diamonds

    • A. V. Isaev
    • V. V. Isaev
    • T. I. Devyatkina

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2083 - 2089

    

16. Efficient Leaching Extraction of Vanadium Oxide from Spent Petrochemical Catalysts

    • V. P. Tarasov
    • E. S. Gorelikov
    • K. O. Petrunin

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2090 - 2095

    

17. Heat Resistance of Transition Metals with an Aluminized Coating

    • A. I. Kovtunov
    • Yu. Yu. Khokhlov
    • S. V. Myamin

    PHYSICAL METALLURGY. THERMAL AND THERMOCHEMICAL TREATMENT TECHNOLOGIES 19 March 2024 Pages: 2096 - 2100

    

18. Assessment of the Blue Brittleness Range of Steel

    • V. M. Matyunin
    • V. N. Varavka
    • M. A. Karimbekov

    METHODS OF STUDYING THE STRUCTURE AND PROPERTIES OF MATERIALS. PROCESS MODELING 19 March 2024 Pages: 2101 - 2106

    

19. Ultrajet Diagnostics of the Functional Properties of a New Cutting Tool Design for the Recycling of Composite Materials

    • S. Li
    • A. L. Galinovskii
    • V. A. Timofeev

    METHODS OF STUDYING THE STRUCTURE AND PROPERTIES OF MATERIALS. PROCESS MODELING 19 March 2024 Pages: 2107 - 2112

    

20. Effect of the Scale Factor on the Elastic Modulus Determined by Instrumented Indentation

    • V. M. Matyunin
    • A. Yu. Marchenkov
    • A. A. Pan’kina

    METHODS OF STUDYING THE STRUCTURE AND PROPERTIES OF MATERIALS. PROCESS MODELING 19 March 2024 Pages: 2113 - 2119

    

21. Experimental Setup and Technique for Studying the Formation and Change of the Structure of the Metal Solidified under Thermomechanical Treatment Conditions

    • A. M. Sergeeva
    • N. S. Lovizin

    METHODS OF STUDYING THE STRUCTURE AND PROPERTIES OF MATERIALS. PROCESS MODELING 19 March 2024 Pages: 2120 - 2125

    

22. Method for Evaluation and Visualization of the Microstructure Materials Heterogeneity

    • D. V. Zhukov
    • M. G. Giorbelidze
    • S. V. Voronin

    METHODS OF STUDYING THE STRUCTURE AND PROPERTIES OF MATERIALS. PROCESS MODELING 19 March 2024 Pages: 2126 - 2132

    

23. Study and Comparison of the Methods of Testing the Tillage Tool Materials

    • S. Li
    • A. L. Galinovskii
    • T. N. Borovik

    METHODS OF STUDYING THE STRUCTURE AND PROPERTIES OF MATERIALS. PROCESS MODELING 19 March 2024 Pages: 2133 - 2139

    

24. Estimation of the Predicted Hardening of Iron during Surface Alloying with a Metal in Combination with Nitriding

    • L. G. Petrova

    COATING DEPOSITION 19 March 2024 Pages: 2140 - 2148

    

25. Estimation and Selection of Working Gases for Plasma Application of Coatings with Stationary and Mobile Equipment

    • I. N. Kravchenko
    • S. V. Kartsev
    • D. I. Petrovskii

    COATING DEPOSITION 19 March 2024 Pages: 2149 - 2154

    

26. Strength of the Polymer–Fiber Interface in Structural Composite Materials

    • A. S. Borodulin
    • V. A. Nelyub
    • A. G. Tereshkov

    NEW MATERIALS. TECHNOLOGY OF COMPOSITE MATERIALS 19 March 2024 Pages: 2155 - 2159

    

27. Service Properties of the Epoxy–Sand Composites Used for Machine Repair

    • T. N. Egunova
    • N. I. Baurova

    NEW MATERIALS. TECHNOLOGY OF COMPOSITE MATERIALS 19 March 2024 Pages: 2160 - 2166

    

28. Impact Toughness of Carbon Fiber-Reinforced Polymers under Extremely Low Arctic Temperature Conditions: The Role of Hybrid Matrix Components

    • E. A. Kosenko
    • N. I. Baurova
    • V. A. Zorin

    NEW MATERIALS. TECHNOLOGY OF COMPOSITE MATERIALS 19 March 2024 Pages: 2167 - 2172

    

29. Effect of the Vacuum-Arc Synthesis Parameters on the Structure and Magnetic Properties of NiO Nanoparticles

    • I. V. Karpov
    • A. V. Ushakov
    • M. V. Brungardt

    NEW MATERIALS. TECHNOLOGY OF COMPOSITE MATERIALS 19 March 2024 Pages: 2173 - 2177

    

30. Features of the Formation of the Microstructure of Glass–Metal Composite Materials Based on Carbonyl Iron Powder

    • Yu. A. Getmanovskii
    • I. M. Mal’tsev
    • I. M. Shishkina

    NEW MATERIALS. TECHNOLOGY OF COMPOSITE MATERIALS 19 March 2024 Pages: 2178 - 2182

    

31. Technologies for Hardening Flat Knives by HFC Boriding

    • V. P. Lyalyakin
    • V. F. Aulov
    • A. V. Bugaev

    EQUIPMENT AND DEVICES 19 March 2024 Pages: 2183 - 2186

    

32. Effect of the Initial Orientation of a Working Tool on the Stress–Strain State during Reversible Surface Plastic Deformation

    • S. A. Zaides
    • Nguyen Hyu Hai

    METAL FORMING 19 March 2024 Pages: 2187 - 2193

    

33. Combined Drawing of an Anisotropic Relaxing Material

    • V. I. Platonov
    • V. N. Chudin

    METAL FORMING 19 March 2024 Pages: 2194 - 2198

    

34. Investigation and Selection of the Optimum Parameters of Hot Die Forging of a Crosspiece Using QForm Simulation

    • A. A. Myshechkin
    • I. N. Kravchenko
    • S. V. Skripnik

    METAL FORMING 19 March 2024 Pages: 2199 - 2205

    

35. Influence of Friction on the Stress–Strain State in a Metal during Forging Bars on a Lever Radial Forging Machine

    • I. I. Nekrasov
    • A. A. Fedulov
    • V. S. Parshin

    METAL FORMING 19 March 2024 Pages: 2206 - 2209

    

36. Determining the Temperature in the Contact Zone during Pendulum Surface Plastic Deformation of Structural Steel

    • S. A. Zaides
    • M. H. Ho

    PLASTIC DEFORMATION OF FERROUS AND NONFERROUS METALS 19 March 2024 Pages: 2210 - 2215

    

37. Studies of the Thermal Fatigue of Superalloys to Obtain Data to Calculate the Life of Parts

    • S. P. Degtyareva
    • T. V. Prokhorova
    • D. A. Safronov

    PLASTIC DEFORMATION OF FERROUS AND NONFERROUS METALS 19 March 2024 Pages: 2216 - 2222

    

38. Determination of the Waviness of Cylindrical Pieces during Pendulum Surface Plastic Deformation

    • S. A. Zaides
    • M. H. Ho

    PLASTIC DEFORMATION OF FERROUS AND NONFERROUS METALS 19 March 2024 Pages: 2223 - 2229

    

39. Tuning Parameters of a Ball-Rolling Mill for Rolling of Grinding Balls

    • D. L. Shvarts
    • I. K. Galim’yanov
    • V. Yu. Rubtsov

    MANUFACTURE OF SPECIAL ROLLED PRODUCTS 19 March 2024 Pages: 2230 - 2236

    

40. Increasing the Wear Resistance and the Overhaul Life of Ploughshares by a Combined Restoration–Hardening Method

    • A. M. Mikhal’chenkov
    • A. A. Gutsan
    • V. E. Gaponova

    REPAIR AND MODIFICATION OF EQUIPMENT 19 March 2024 Pages: 2237 - 2240

    

41. Increasing the Overhaul Life of Hydraulic Distributors by Electric Spark Treatment

    • I. N. Kravchenko
    • S. A. Velichko
    • A. F. Slivov

    REPAIR AND MODIFICATION OF EQUIPMENT 19 March 2024 Pages: 2241 - 2247

    

42. Surface Structure Formed after Cutting-Edge and Abrasive Machining of Parts Made of Powder Materials

    • V. A. Skryabin
    • A. G. Skhirtladze

    POWDER METALLURGY TECHNOLOGIES. ADDITIVE TECHNOLOGIES 19 March 2024 Pages: 2248 - 2252

    

43. Properties of an AlSi10Mg Aluminum Alloy for the Production of a Body-Shaped Part Using an SLM Additive Manufacturing Technology

    • N. O. Strizhevskaya
    • D. A. Gnevashev
    • O. A. Bytsenko

    POWDER METALLURGY TECHNOLOGIES. ADDITIVE TECHNOLOGIES 19 March 2024 Pages: 2253 - 2261

    

44. Spheroidization of Particles in Tool Cutting Plates Made of Powder Hard Alloys

    • V. A. Skryabin
    • A. E. Zverovshchikov

    POWDER METALLURGY TECHNOLOGIES. ADDITIVE TECHNOLOGIES 19 March 2024 Pages: 2262 - 2264

    

45. Influence of Heat and Vibration Treatment on the Cold Resistance and Structure of ER70-S6 Steel Fabricated by 3D Printing Using Electric Arc Cladding

    • D. A. Shatagin
    • M. S. Anosov
    • N. S. Klochkova

    POWDER METALLURGY TECHNOLOGIES. ADDITIVE TECHNOLOGIES 19 March 2024 Pages: 2265 - 2269

    

46. Structure Formation in 09G2S Steel Produced by Additive Electric Arc Growth

    • M. S. Anosov
    • D. A. Shatagin
    • A. M. Mikhailov

    POWDER METALLURGY TECHNOLOGIES. ADDITIVE TECHNOLOGIES 19 March 2024 Pages: 2270 - 2274

    

47. Evolution of the Composition of the Ion-Alloyed Layer in a VT6 Titanium Alloy after Aluminum–Ion Irradiation

    • V. V. Ovchinnikov
    • N. V. Uchevatkina
    • I. S. Solov’ev

    ELECTROPHYSICAL, ELECTROCHEMICAL, AND OTHER TREATMENT METHODS 19 March 2024 Pages: 2275 - 2280

    

48. Electrochemical Treatment of the Surface of 12Kh18N10T Steel Parts Produced by Selective Laser Melting

    • To Man Khung
    • E. V. Safonov
    • V. V. Ovchinnikov

    ELECTROPHYSICAL, ELECTROCHEMICAL, AND OTHER TREATMENT METHODS 19 March 2024 Pages: 2281 - 2287

    

49. Methods for Decreasing the Electrical Energy Consumption in the Aluminum Production

    • L. B. Tolymbekova
    • A. K. Zhunusov
    • B. S. Kelamanov

    ELECTROPHYSICAL, ELECTROCHEMICAL, AND OTHER TREATMENT METHODS 19 March 2024 Pages: 2288 - 2293

    

50. Deformation of a Rivet under Ultrasonic Vibrations

    • S. K. Sundukov

    ELECTROPHYSICAL, ELECTROCHEMICAL, AND OTHER TREATMENT METHODS 19 March 2024 Pages: 2294 - 2301