Abstract
The influence of the type (grits from an ingot, a quick-cooled plate) and size of the fraction of a modifier and the REM content on the structural of camshaft castings made of ChVG40 vermicular graphite iron (VGI) are studied.
REFERENCES
B. A. Kuz’min et al., Metallurgy. Metallurgy and Structural Materials (Vysshaya Shkola, Moscow, 1977).
Mechanical Engineering Parts Made of Cast Iron with Vermicular Graphite: Properties, Technology, Control: Abstracts of ISTC Proc., Ed. by A. G. Panov (Kazansk. Univ., Kazan, 2017).
D. A. Boldyrev, “Formation of rational structure and increase of stability of properties of graphitized cast irons for automotive industry by their modification and microalloying,” Candidate’s Disseration in Engineering (Samarsk. Gos. Tekh. Univ., Samara, 2013).
Funding
This work was supported by ongoing institutional funding. No additional grants to carry out or direct this particular research were obtained.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors of this work declare that they have no conflicts of interest.
Additional information
Translated by V. Selikhanovich
Publisher’s Note.
Pleiades Publishing remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Boldyrev, D.A., Popova, L.I. Influence of the Parameters of a Modifier on the Structure Formation in Vermicular Graphite Iron in Camshaft Castings. Russ. Metall. 2023, 2030–2035 (2023). https://doi.org/10.1134/S0036029523700064
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0036029523700064