1. Modification of Powder Fillers in Order to Improve Operating Properties of Composite Polymer-Based Materials

   • Igor I. Beloborodov
   • Svetlana V. Sukhostavets

   OriginalPaper Pages: 219 - 222

2. Milling of Carbide-Steel Powder Components and Their Mixtures in an Attrition Mill

   • Tatyana M. Pavlygo
   • Leonid G. Plomod'yalo
   • Lev. I. Svistun

   OriginalPaper Pages: 223 - 228

3. Effect of Shell Dimensions on Compaction and Shape Change during SHS-Pressing

   • Alexander P. Amosov
   • Vladimir P. Radchenko
   • Alexander F. Fedotov

   OriginalPaper Pages: 229 - 235

4. Effect of the Dimensional Factor on Sintering Composites of the System W – Sc₂O₃

   • Olga I. Get'man
   • Valentina V. Panichkina
   • Valerii V. Skorokhod

   OriginalPaper Pages: 236 - 241

5. Study of the Interaction of Adhesion-Active Copper-Silver Alloy PSR-40 with Stainless Steel of the Austenitic Class

   • Anatolii G. Kostornov
   • Olga I. Fushchich

   OriginalPaper Pages: 242 - 246

6. Adhesive Strength of Material Joints for Orthopaedic Stomatology

   • Anatolii V. Besov

   OriginalPaper Pages: 247 - 250

7. Laws of Formation of Electrospark Coatings from Alloys of the Ni – Cr – Al – Y System

   • Alexander V. Paustovskii
   • Raisa A. Alfintseva
   • Stepan N. Kirilenko

   OriginalPaper Pages: 251 - 257

8. Influence of the Structure and Properties OF WC – Co Alloy Powders on the Structure and Wear-Resistance of Detonation Coatings

   • Valerii E. Oliker
   • Eugenii F. Grechishkin
   • Izabella I. Timofeeva

   OriginalPaper Pages: 258 - 264

9. Relationship between Erosion and Mechanical Characteristics of Fine-Grained Hard Alloy WC – 16% Co Obtained by Solid-Phase and Liquid-Phase Consolidation. Part 1. Erosion Resistance

   • Galina A. Bovkun
   • Anatolii V. Laptev

   OriginalPaper Pages: 265 - 272

10. Free Surface Energy as a Criterion for the Sequence of Intermetallic Layer Formation in Reaction Couples

    • Valentin I. Nizhenko

    OriginalPaper Pages: 273 - 279

11. Thermodynamic Analysis of High-Temperature Oxidation of Material in the Cr – TiB₂ – TiSi₂ System in Air

    • Tamara M. Evtushok
    • Stanislav P. Gordienko

    OriginalPaper Pages: 280 - 283

12. Heat Capacity and Enthalpy of Bi₂Si₃ and Bi₂Te₃ in the Temperature Range 58-1012 K

    • Nikolai P. Gorbachuk
    • Vladislav R. Sidorko

    OriginalPaper Pages: 284 - 290

13. Phase Formation in Sintering of Materials Based on Silicon Nitride with Li₂CO₃ and AlN Additives

    • Oleg N. Grigor'ev
    • Alla A. Rogozinskaya
    • Tatyana V. Dubovik

    OriginalPaper Pages: 291 - 294

14. High-Temperature Corrosion of AlN-Based Composite Ceramic in Air and in Combustion Products of Commercial Fuel. Part 2. Corrosion of Ceramic Composites in the AlN – SiC – TiB₂ System in Air and in Combustion Products of Kerosene and Diesel Fuel

    • Vladimir A. Lavrenko
    • D. J. Baxter
    • Martina Desmaison-Brut

    OriginalPaper Pages: 295 - 304

15. Methods of Protecting VKh-2K Alloy from High-Temperature Gas and Salt Corrosion

    • Ivan V. Oryshich
    • Nelli E. Poryadchenko

    OriginalPaper Pages: 305 - 310

16. Formation of Quasicrystals and Related Structures in Systems of Aluminum with Transition Metals. Part 2. Binary Systems Formed by Aluminum with 4d and 5d Metals

    • Benjamin Grushko
    • Tamara Ya. Velikanova

    OriginalPaper Pages: 311 - 322

17. Izrail Duvidovich Radomysel'skii (1914-1986)

    OriginalPaper Pages: 323 - 326