Articles

Search all Powder Metallurgy and Metal Ceramics articles

Filter by

Volume:

Sort by

Date published:

New to old Old to new

Showing 51-100 of 10,540 articles

Interaction of Lanthanum, Yttrium, and Gadolinium Oxides at 1600°C
O. V. Chudinovych
O. I. Bykov
A. V. Samelyuk
PHYSICOCHEMICAL MATERIALS RESEARCH 16 October 2023 Pages: 86 - 97
Enhanced Tribological Properties of CrN Coatings on Densified Surfaces of Fe-Based Porous Materials Obtained Through Powder Metallurgy and Ultrasonic Shot Peening Treatment
Wuming Guo
Yebiao Zhu
Fei Song
PROTECTIVE AND FUNCTIONAL POWDER COATINGS 17 October 2023 Pages: 77 - 85
Complex Permittivity in the AlN–SiC Composite in the 1–100 GHz Microwave Frequency Range
V. I. Chasnyk
D. V. Chasnyk
O. M. Kaidash
OriginalPaper 17 October 2023 Pages: 66 - 76
Mechanical and Tribological Properties of Cast Monocarbides and Multicomponent High-Entropy Carbides
V. F. Horban
M. O. Krapivka
A. O. Samelyuk
REFRACTORY AND CERAMIC MATERIALS 16 October 2023 Pages: 58 - 65
Enhanced Study of Magnetic Properties of Polyvinyl Alcohol-Coated Superparamagnetic Iron Oxide Nanoparticles Below Blocking Temperatures
Bandana Gogoi
Upamanyu Das
NANOSTRUCTURED MATERIALS 20 October 2023 Pages: 41 - 57
Densification Kinetics of the TiB₂–20 wt.% MoSi₂ Composite During Nonisothermal Spark Plasma Sintering
M. S. Kovalchenko
R. V. Lytvyn
O. B. Zgalat-Lozynskyy
THEORY AND TECHNOLOGY OF SINTERING, THERMAL AND THERMOCHEMICAL TREATMENT 16 October 2023 Pages: 32 - 40
Influence of Deformation Temperature on the Formation of Contacts in Titanium Powder Ribbons Produced by Symmetric and Asymmetric Rolling
V. S. Voropaev
K. O. Gogaev
Ya. I. Yevych
OriginalPaper 16 October 2023 Pages: 22 - 31
Method of Determining the Liquid Phase Content in the Pelletized Charge for Producing Compacts with Maximum Strength I. Experimental Study
S. V. Vashchenko
A. Yu. Khudyakov
Yu.S. Semenov
THEORY AND TECHNOLOGY OF FORMING PROCESSES 16 October 2023 Pages: 9 - 21
Process Properties of Gas-Atomized and Ground Fine High-Speed Steel Powder Mixtures
O. K. Radchenko
K. O. Gogaev
V. A. Nazarenko
THEORY, PRODUCTION TECHNOLOGY, AND PROPERTIES OF POWDERS AND FIBERS 16 October 2023 Pages: 1 - 8
The Influence of Ultradispersed Diamond Powder and Tin Added to the Matrix of Diamond Tubular Drills on Their Performance Characteristics for Drilling Porcelain, Granite, and Abrasive Stone
V. P. Umansky
V. P. Krasovsky
O. A. Bashchenko
OriginalPaper 14 August 2023 Pages: 766 - 772
Studying the Compressibility of Ground Metallurgical Raw Materials
A. Yu. Khudyakov
S. V. Vashchenko
Yu. S. Semenov
POWDER METALLURGY INDUSTRY AND MANAGERIAL ECONOMICS 14 August 2023 Pages: 754 - 765
The Influence of Strain on Texture Changes and Phase Transformations in the Quenched Ti_92.5Nb₅Mo_2.5 Alloy
O. M. Myslyvchenko
Yu. M. Podrezov
V. M. Voblikov
STRUCTURAL MATERIALS RESEARCH 14 August 2023 Pages: 748 - 753
Temperature Dependences of the Mechanical Properties of Microlayer Ti/TiAl₃ Composites Under Cyclic Loading
Yu. F. Lugovskoy
V. A. Nazarenko
V. G. Borovik
OriginalPaper 15 August 2023 Pages: 736 - 747
Effect of the ZrO₂-Based Solid Solution on the Low-Temperature Phase Stability of ZrO₂−Y₂O₃−CeO₂ Materials
I. O. Marek
O. V. Dudnik
O. K. Ruban
OriginalPaper 14 August 2023 Pages: 727 - 735
Thermodynamic Assessment of the Glass-Forming Cu–Ti–Hf System
M. A. Turchanin
P. G. Agraval
G. O. Vodopyanova
PHYSICOCHEMICAL MATERIALS RESEARCH 17 August 2023 Pages: 708 - 726
Characterization of the Glass Structure of East Lampung's Scoria Basalt (Indonesia) Applied to the Ceramic Body
David Candra Birawidha
Dwi Asmi
Diah Susanti
REFRACTORY AND CERAMIC MATERIALS 12 August 2023 Pages: 699 - 707
Analysis of Contamination in the Process of Forming a Titanium-Based Nanocrystalline Alloy Using VSM, SEM-EDS, and XRD Techniques
Abderahim Abada
Abderrahmane Younes
OriginalPaper 14 August 2023 Pages: 691 - 698
Use of Carbon Nanostructures in Various 3D Printing Techniques
Ol. D. Zolotarenko
E. P. Rudakova
M. Yu. Smirnova-Zamkova
NANOSTRUCTURED MATERIALS 14 August 2023 Pages: 670 - 690
Sintering of Ferromagnetic Materials at Lower Temperatures in Hydrogen. II. Nd–Fe–B Alloys
I. I. Bulyk
I. V. Borukh
THEORY AND TECHNOLOGY OF SINTERING, THERMAL AND THERMOCHEMICAL TREATMENT 15 August 2023 Pages: 657 - 669
Densification Dynamics of WC–36 wt.% Cu Cermet During Impact Assisted Sintering in Vacuum
M. S. Kovalchenko
A. V. Laptiev
O. I. Tolochyn
THEORY AND TECHNOLOGY OF FORMING PROCESSES 14 August 2023 Pages: 644 - 656
Comparative Study of Nickel-Based Super-Alloy Powders Atomized by Argon and Nitrogen
Weijie Zhong
Hanlin Peng
Guoqing Zhang
THEORY, PRODUCTION TECHNOLOGY, AND PROPERTIES OF POWDERS AND FIBERS 14 August 2023 Pages: 633 - 643
Effect of Metal Ions Ratio on Luminescence Properties of LiGa₅O₈:Cr³⁺
Shiran Wu
Yue Wang
Yi Shen
OriginalPaper 12 June 2023 Pages: 625 - 631
High-Temperature Phases in the Fe–Mo–Cr–C System
T. A. Velikanova
A. M. Zaslavskii
M. V. Kindrachuk
PHYSICOCHEMICAL MATERIAL RESEARCH 14 June 2023 Pages: 613 - 624
Study of the Mechanical Behaviour of Al–Cu–Fe Quasicrystalline Coatings Across a Broad Range of Temperatures
Yu.V. Milman
M. O. Iefimov
Tian Haoliang
OriginalPaper 10 June 2023 Pages: 605 - 612
Effect of Plasma Spraying Parameters on the Properties of (Ti, Cr)C–Ni Composite Coatings
O. P. Umanskyi
O. Ye. Terentiev
O. O. Chernyshov
PROTECTIVE AND FUNCTIONAL POWDER COATINGS 09 June 2023 Pages: 597 - 604
Effect of Particulate Ti–Al–TiC Reinforcements on the Mechanical Properties of Epoxy Polymer Composites
A. V. Buketov
G. A. Bagliuk
A. S. Torpakov
COMPOSITE MATERIALS 12 June 2023 Pages: 586 - 596
Phase Composition, Structure, and Mechanical Properties of Niobium-Doped γ-TiAl Materials Produced by Powder Hydride Technology
I. I. Ivanova
Yu. M. Podrezov
N. A. Krylova
SINTERED METALS AND ALLOYS 12 June 2023 Pages: 574 - 585
Effect of Sintering Temperature on the Microstructure and Properties of High-Strength and Highly Conductive 5 wt.% ZrB₂/Cu Composite
Zhang Peng
Wang Chenchen
Li Wei
OriginalPaper 12 June 2023 Pages: 560 - 573
Sintering of Ferromagnetic Materials at Lower Temperatures in Hydrogen I. Sm₂Co₁₇ Alloys
I. I. Bulyk
O. P. Kononiuk
OriginalPaper 13 June 2023 Pages: 548 - 559
Effect of Doping on the Porous Structure of Iron-Based Compacts During Sintering
M. V. Kovalenko
Y. M. Romanenko
P. I. Loboda
OriginalPaper 12 June 2023 Pages: 541 - 547
Reactive Synthesis of B₄C–CrB₂, B₄C–TiB₂, AND B₄C–TiCrB₂ Heterophase Ceramics by Spark Plasma Sintering
T. M. Kutran
M. V. Zamula
H. Yu. Borodianska
THEORY AND TECHNOLOGY OF SINTERING, THERMAL AND THERMOCHEMICAL TREATMENT 14 June 2023 Pages: 522 - 540
Simulation Modeling of Forming Processes for Powder Mixtures
V. D. Rud
N. A. Khrystynets
OriginalPaper 30 May 2023 Pages: 514 - 521
Evolution of the Stress–Strain State of Porous Workpieces in Hot Extrusion Forging to Produce Axisymmetric Parts with an Axial Hole
G. A. Bagliuk
S. F. Kyryliuk
THEORY AND TECHNOLOGY OF FORMING PROCESSES 31 May 2023 Pages: 504 - 513
Submicron γ-, γ’-, θ-, and κ-Al₂O₃ Powders from Alkaline Waste
V. V. Garbuz
T. A. Silinska
T. V. Khomko
OriginalPaper 29 May 2023 Pages: 498 - 503
Physical and Process Properties of Fine Gas-Atomized R6M5K5 Powders Produced in Different Conditions
O. K. Radchenko
K. O. Gogaev
V. A. Nazarenko
THEORY, PRODUCTION TECHNOLOGY, AND PROPERTIES OF POWDERS AND FIBERS 29 May 2023 Pages: 489 - 497
Correction to: Resorbable Calcium Phosphates Based Ceramics
T. V. Safronova
V. Putlayev
M. Shekhirev
Correction 04 February 2023 Pages: 488 - 488
Information on the Annual Report of the Ukrainian Commission of Phase Diagrams and Thermodynamics (2022)
M. A. Turchanin
T. Ya. Velikanova
K. Ye. Korniyenko
INFORMATION. CHRONICLE 30 January 2023 Pages: 481 - 487
Determination of Hydrogen in Hydrogenated Titanium and Zirconium Diborides using an ASD Fieldspec 3 FR Spectroradiometer
A. S. Dranenko
I. A. Morozov
O. Yu. Khyzhun
OriginalPaper 01 February 2023 Pages: 474 - 480
Contact Interaction of Chromium Diboride with Iron-Based Self-Fluxing Alloy
M. S. Storozhenko
O. P. Umanskyi
Yu.V. Gubin
PHYSICOCHEMICAL MATERIALS RESEARCH 01 February 2023 Pages: 465 - 473
Electron-Beam and Plasma Oxidation-Resistant and Thermal-Barrier Coatings Deposited on Turbine Blades Using Cast and Powder Ni(Co)CrAlY(Si) Alloys Produced by Electron Beam Melting IV. Chemical and Phase Composition and Structure of Cocralysi Powder Alloys and Their Use
I. M. Grechanyuk
M. I. Grechanyuk
V. I. Gots
PROTECTIVE AND FUNCTIONAL POWDER COATINGS 02 February 2023 Pages: 459 - 464
Microstructure, Mechanical and Tribological Properties of High-Entropy Carbide Ceramics (VNbTaMoW)C₅–SiC
Zhang Hai
Wu Zihao
Hai Wanxiu
OriginalPaper 02 February 2023 Pages: 451 - 458
Composite Ceramics for Thermal-Barrier Coatings Produced from Zirconia Doped with Rare Earth Oxides
O. V. Dudnik
S. M. Lakiza
O. K. Ruban
REFRACTORY AND CERAMIC MATERIALS 01 February 2023 Pages: 441 - 450
Behavior of Eutectic Ti–Si–Zr Titanium Alloys in Different Friction Conditions
I. D. Gorna
K. E. Grinkevich
S. O. Firstov
SINTERED METALS AND ALLOYS 01 February 2023 Pages: 432 - 440
Effect of Sintering Temperature on Structure and Luminescent Properties of Nano-Mn₃B₇O₁₃Cl
Sang Xiong
Xiaomeng Zhang
Dong Liang
NANOSTRUCTURED MATERIALS 01 February 2023 Pages: 424 - 431
Oxidation of the Irshansk Ilmenite Ore in Microwave Heating
O. M. Myslyvchenko
R. V. Litvin
O. B. Zgalat-Lozynskyy
THEORY AND TECHNOLOGY OF SINTERING, THERMAL AND THERMOCHEMICAL TREATMENT 01 February 2023 Pages: 414 - 423
Materials and Techniques for 3D Printing in Ukraine (Overview)
O. B. Zgalat-Lozynskyy
THEORY AND TECHNOLOGY OF FORMING PROCESSES 01 February 2023 Pages: 398 - 413
Calculation of Geometrical Parameters of the Laval Nozzle and Gas Dynamic Spraying Conditions in the Production of Fine Tool Steel Powders
D.M. Fedorov
K.O. Gogaev
Yu.V. Kolesnichenko
THEORY, PRODUCTION TECHNOLOGY, AND PROPERTIES OF POWDERS AND FIBERS 01 February 2023 Pages: 389 - 397
Spectroscopic Diagnostics of the Electric Erosion of Electrodes from the High-Entropy CrMnFeCoNi Alloy in Spark Discharge in Air. Modeling and Experiment
V.D. Kurochkin
O.M. Romanenko
M.V. Kolomytsev
STRUCTURAL MATERIALS RESEARCH 07 December 2022 Pages: 377 - 387
Electrochemical Properties of the ZrNiMnCrV Alloy Depending on Quantitative Phase Composition
Yu. M. Solonin
O.Z. Galiy
S.S. Petrovska
OriginalPaper 07 December 2022 Pages: 370 - 376
Effect of Nickel, Tin, and Indium Doping of the Eutectic Silver–Copper Filler on the Capillary and Contact Processes in Brazing of Nonmetallic Alumina-Based Materials with Titanium
V.S. Zhuravlev
T.V. Sydorenko
O.Yu. Koval
OriginalPaper 07 December 2022 Pages: 360 - 369