Fundamental and engineering thermal aspects of energy and environment Mostafa Safdari ShadlooHuijin XuAlireza Maheri Acknowledgments 04 January 2020 Pages: 2395 - 2398
Technological and economical analysis of flare recovery methods, and comparison of different steam and power generation systems Maryam ShayanVahid PirouzfarHossein Sakhaeinia OriginalPaper 14 June 2019 Pages: 2399 - 2411
Thermal analysis and thermo-hydraulic characteristics of zirconia–water nanofluid under a convective boiling regime M. M. SarafrazI. TliliMohammad Reza Safaei OriginalPaper 12 June 2019 Pages: 2413 - 2422
Computational analysis of heat transfer in a PEM fuel cell with metal foam as a flow field Ebrahim Afshari OriginalPaper 13 May 2019 Pages: 2423 - 2434
Thermal evaluation of a heat pipe working with n-pentane-acetone and n-pentane-methanol binary mixtures M. M. SarafrazZhe TianMarjan Goodarzi OriginalPaper 01 June 2019 Pages: 2435 - 2445
Intake charge temperature effect on performance characteristics of direct injection low-temperature combustion engines Morteza FathiDavood Domiri GanjiOmid Jahanian OriginalPaper 02 July 2019 Pages: 2447 - 2454
Numerical simulation of natural gas/diesel dual-fuel engine for investigation of performance and emission Amir Hossein FakhariRouzbeh ShafaghatSeyed Sadegh Motallebi Hasankola OriginalPaper 29 July 2019 Pages: 2455 - 2464
Numerical investigation of the effects of inlet valve closing temperature and exhaust gas recirculation on the performance and emissions of an RCCI engine Seyed Sadegh Motallebi HasankolaRouzbeh ShafaghatMahdi Shooghi OriginalPaper 04 July 2019 Pages: 2465 - 2474
Comparing the performance of a CI engine after replacing the mechanical injector with a common rail solenoid injector Ashkan GhaediRouzbeh ShafaghatSeyed Sadegh Motallebi Hasankola OriginalPaper 09 September 2019 Pages: 2475 - 2485
Correction to: Comparing the performance of a CI engine after replacing the mechanical injector with a common rail solenoid injector Ashkan GhaediRouzbeh ShafaghatSeyed Sadegh Motallebi Hasankola Correction 12 February 2020 Pages: 2487 - 2487
Experimental study of knocking phenomenon in different gasoline–natural gas combinations with gasoline as the predominant fuel in a SI engine Reza BehradEbrahim Abdi AghdamHadi Ghaebi OriginalPaper 25 July 2019 Pages: 2489 - 2497
Development of soot formation sub-model for Scania DC-9 diesel engine in the steady-state condition Behzad Omidi KashaniBehzad Bidarian OriginalPaper 30 August 2019 Pages: 2499 - 2508
An experimental investigation of the injection timing effect on the combustion phasing and emissions in reactivity-controlled compression ignition (RCCI) engine Seyed Sadegh Motallebi HasankolaRouzbeh ShafaghatKamyar Nikzadfar OriginalPaper 27 September 2019 Pages: 2509 - 2516
Correction to: An experimental investigation of the injection timing effect on the combustion phasing and emissions in reactivity-controlled compression ignition (RCCI) engine Seyed Sadegh Motallebi HasankolaRouzbeh ShafaghatKamyar Nikzadfar Correction 17 February 2020 Pages: 2517 - 2517
Investigating the effect of coolant’s heat transfer type on thermostat placement Mohsen NazoktabarKamran ArshtabarHassan Mohammadkhani OriginalPaper 19 September 2019 Pages: 2519 - 2526
Emission and performance analysis of DI diesel engines fueled by biodiesel blends via CFD simulation of spray combustion and different spray breakup models: a numerical study Abbas Zarenezhad AshkezariKambiz DivsalarIman Abbaspour OriginalPaper 02 November 2019 Pages: 2527 - 2539
Effects of equivalence and fuel ratios on combustion characteristics of an RCCI engine fueled with methane/n-heptane blend Atie TaqizadehOmid JahanianSeyed Iman Pourmousavi Kani OriginalPaper 14 August 2019 Pages: 2541 - 2551
Numerical simulation and experimental investigation of air cooling system using thermoelectric cooling system A. Fattahpour MoazzezG. NajafiS. S. Hoseini OriginalPaper 30 October 2019 Pages: 2553 - 2563
Numerical simulation of carbon dioxide sorption circulating fluidized bed used in solid oxide fuel cell M. Y. A. Jamalabadi OriginalPaper 18 July 2019 Pages: 2565 - 2575
Second-law thermodynamic analysis on non-premixed counterflow methane flames with hydrogen addition Yusen LiuJiabo ZhangDong Han OriginalPaper 26 July 2019 Pages: 2577 - 2583
Comparing various machine learning approaches in modeling the dynamic viscosity of CuO/water nanofluid Mohammad Hossein AhmadiBehnam Mohseni-GharyehsafaRavinder Kumar OriginalPaper 16 September 2019 Pages: 2585 - 2599
A CFD investigation of the effect of non-Newtonian behavior of Cu–water nanofluids on their heat transfer and flow friction characteristics Qingang XiongMehdi Vahabzadeh BozorgGiulio Lorenzini OriginalPaper 12 September 2019 Pages: 2601 - 2621
Investigation of energy performance in a U-shaped evacuated solar tube collector using oxide added nanoparticles through the emitter, absorber and transmittal environments via discrete ordinates radiation method Yeping PengAli ZahedidastjerdiMarjan Goodarzi OriginalPaper 26 August 2019 Pages: 2623 - 2631
Measuring diffusion coefficients of gaseous propane in heavy oil at elevated temperatures Khan AtharMohammad Hossein DoranehgardHassan Dehghanpour OriginalPaper 25 September 2019 Pages: 2633 - 2645
SolidWorks visualization of 3D fracture geometry in tight oil reservoirs Liu YangFukun ShiYuanfang Cheng OriginalPaper 18 October 2019 Pages: 2647 - 2657
Modeling the propane combustion process within a micro-catalytic porous combustor by using the lattice Boltzmann method X. B. FengH. J. Xu OriginalPaper 20 September 2019 Pages: 2659 - 2677
Thermal conductivity prediction of nanofluids containing CuO nanoparticles by using correlation and artificial neural network Ali KomeilibirjandiAmir Hossein RaffieeMostafa Safdari Shadloo OriginalPaper 23 September 2019 Pages: 2679 - 2689
Techno-economic analysis of new integrated system of humid air turbine, organic Rankine cycle, and parabolic trough collector Jiaojiao LiAmin MohammadiAkbar Maleki OriginalPaper 05 October 2019 Pages: 2691 - 2703
Recycling municipal solid waste utilizing gasification technology: a case study Payam HooshmandHamidReza KhakRahMohammad Yaghoub Abdollahzadeh Jamalabadi OriginalPaper 04 December 2019 Pages: 2705 - 2718
Analytical modeling on the geo-stress and casing damage prevention with the thermo-hydro-mechanical (THM) coupling of multi-field physics Youjun JiHuijin XuLiang Guo OriginalPaper 02 November 2019 Pages: 2719 - 2737
State of the art on flow and heat transfer performance of compact fin-and-tube heat exchangers A. Y. AdamA. N. OumerT. B. Aklilu OriginalPaper 07 November 2019 Pages: 2739 - 2768
A simplified mathematical study of thermochemical preparation of particle oxide under counterflow configuration for use in biomedical applications Amir TabaeiSadegh SadeghiNader Karimi OriginalPaper 31 October 2019 Pages: 2769 - 2779
Compression ratio energy and exergy analysis of a developed Brayton-based power cycle employing CAES and ORC Seyed Amin BagherzadehBehrooz RuhaniSara Rostami OriginalPaper 16 November 2019 Pages: 2781 - 2790
Heat transfer analysis of energy and exergy improvement in water-tube boiler in steam generation process Huawei WuMahdi Hashemi BeniSara Rostami OriginalPaper 16 November 2019 Pages: 2791 - 2799
Controlled elitist multi-objective genetic algorithm joined with neural network to study the effects of nano-clay percentage on cell size and polymer foams density of PVC/clay nanocomposites Wei HeSeyed Amin BagherzadehQuang-Vu Bach OriginalPaper 02 December 2019 Pages: 2801 - 2810
Reducing AHU energy consumption by a new layout of using heat recovery units Rasool KalbasiAmin ShahsavarMasoud Afrand OriginalPaper 06 December 2019 Pages: 2811 - 2820
Incorporating novel heat recovery units into an AHU for energy demand reduction-exergy analysis Rasool KalbasiAmin ShahsavarMasoud Afrand OriginalPaper 05 December 2019 Pages: 2821 - 2830
Modeling of pore formation in phase inversion processes: analysis of pore formation mechanism Manuel Hopp-HirschlerUlrich Nieken OriginalPaper 13 December 2019 Pages: 2831 - 2846
Generation expansion planning by considering wind resource in a competitive environment Chunpeng TianAkbar MalekiMasoud Afrand OriginalPaper 13 December 2019 Pages: 2847 - 2857
Numerical simulation of critical heat flux in forced boiling of a flow in an inclined tube with different angles Mohammad Reza SheykhiMasoud AfrandPouyan Talebizadehsardari OriginalPaper 16 January 2020 Pages: 2859 - 2880
Energetic analysis of an air handling unit combined with enthalpy air-to-air heat exchanger Rasool KalbasiBehrooz RuhaniSara Rostami OriginalPaper 12 December 2019 Pages: 2881 - 2890
Transient natural convection: scale analysis of dry cooling towers S. HeF. SabriKamel Hooman OriginalPaper 30 November 2019 Pages: 2891 - 2897
A numerical study on the acoustic forcing of a laminar premixed saturated spray flame Qiang LiFangmian DongPeijin Liu OriginalPaper 16 December 2019 Pages: 2899 - 2912
Improving performance of AHU using exhaust air potential by applying exergy analysis Rasool KalbasiFarhad IzadiPouyan Talebizadehsardari OriginalPaper 20 January 2020 Pages: 2913 - 2923
Comparative analysis of refrigerant performance between LPG and R134a under subtropical climate Rakibul Hossain AhmadArafat A. BhuiyanA. K. M. Sadrul Islam OriginalPaper 11 December 2019 Pages: 2925 - 2935