Online first articles
Articles not assigned to an issue 38 articles
-
-
Mechanical Response and Failure Mechanism of AFRP-repaired Corroded CHS Tubes Under Axial Compression
Authors (first, second and last of 5)
- Changzi Wang
- Xiaofei Cui
- Wentao He
- Content type: Research
- Published: 25 April 2024
-
Performance Optimization of Sol-Derived C/Mullite Composites by Reducing the Sintering Shrinkage of Mullite Matrix
Authors (first, second and last of 4)
- Wei Zhang
- Qingsong Ma
- Weiguo Mao
- Content type: Research
- Published: 22 April 2024
-
Correction: Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness
Authors (first, second and last of 8)
- Shadab Anwar Shaikh
- M. F. N. Taufique
- Ayoub Soulami
- Content type: Correction
- Published: 20 April 2024
-
Tensile Creep Performance of PVC Flexible Composites Reinforced With Aramid Warp-Knitted Fabrics From Various Architectures
Authors (first, second and last of 4)
- Wenya Yin
- Ziyu Zhao
- Pibo Ma
- Content type: OriginalPaper
- Published: 20 April 2024
-
Enhancing the Robustness of Hybrid Metal-Composite Connections Through 3D Printed Micro Penetrative Anchors
Authors
- Luca Raimondi
- Luca Tomesani
- Andrea Zucchelli
- Content type: Research
- Open Access
- Published: 13 April 2024
-
The Relationship Between the Extent of Indentation and Impact Damage in Carbon-Fibre Reinforced-Plastic Composites after a Low-Velocity Impact
Authors (first, second and last of 8)
- R. A. Brooks
- J. Liu
- J. P. Dear
- Content type: Research
- Open Access
- Published: 03 April 2024
This is part of 1 collection: -
Finite Element Analysis and Machine Learning Guided Design of Carbon Fiber Organosheet-Based Battery Enclosures for Crashworthiness
Authors (first, second and last of 8)
- Shadab Anwar Shaikh
- M. F. N. Taufique
- Ayoub Soulami
- Content type: Research
- Published: 01 April 2024
-
Retained Hygrothermal State Compression Damage Behavior Investigation of Carbon Fiber Reinforced Composites
Authors (first, second and last of 5)
- Haodong Huo
- Jingchao Wei
- Zhihua Wang
- Content type: Research
- Published: 01 April 2024
This is part of 1 collection: -
Investigating the Effects of Contact Area and Chamfering on the Failure Behavior of Plain Woven Composite-Metal T-joints
Authors (first, second and last of 4)
- Qi Zhang
- Zhangjie Yu
- Guangming Zhou
- Content type: OriginalPaper
- Published: 20 March 2024
-
Effect of Bricks-and-Mortar Architecture on Fracture Behavior of SiCp/Al Composite: A Finite Element Analysis
Authors (first, second and last of 10)
- Xiang Gao
- Xiaonan Lu
- Hua-Xin Peng
- Content type: Research
- Published: 19 March 2024
-
Design, Manufacture, and Cryogenic Testing of a Linerless Composite Tank for Liquid Hydrogen
Authors (first, second and last of 6)
- Robin Olsson
- Christopher Cameron
- Jocke Pettersson
- Content type: Research
- Open Access
- Published: 18 March 2024
-
A Non-linear Mean-Field Debonding Model at Large Strains for the Analysis of Fibre Kinking in UD Composites
Authors (first, second and last of 6)
- Chun Cheng
- Chunlei Song
- Xiaozhe Ju
- Content type: Research
- Published: 15 March 2024
-
Hygrothermal Behavior of Carbon Fiber Fabric Reinforced Vinylester Resin Composite Structures
Authors (first, second and last of 6)
- Jincheng Gao
- Xu Li
- Anxin Ding
- Content type: Research
- Published: 12 March 2024
This is part of 1 collection: -
On the Micro-Stress Fields in Fibre-Hybrid Polymer Composite Laminae with Periodic Microstructure Under Transverse Tension and Transverse Shear Loading
Authors (first, second and last of 6)
- G. Romano
- Y. N. Rao
- P. Potluri
- Content type: Research
- Open Access
- Published: 09 March 2024
-
Effects of Service Temperature on the Mechanical Properties of CFRP/Aluminum Alloy Self-Piercing Riveting Joints
Authors (first, second and last of 4)
- Weimin Zhuang
- Hailun Zhang
- Enming Wang
- Content type: Research
- Published: 09 March 2024
This is part of 1 collection: -
The Investigation of Preload Relaxation Behavior of CFRP Bolted Joints Under Thermal-Oxygen Environment: Modeling and Experiments
Authors (first, second and last of 6)
- Xuda Qin
- Gongbo Feng
- Hao Li
- Content type: Research
- Published: 06 March 2024
-
Mechanical Stability of Carbon/Ramie Fiber Hybrid Composites Under Hygrothermal Aging
Authors (first, second and last of 7)
- Ming Cai
- Jiwei Liu
- Baozhong Sun
- Content type: Research
- Published: 04 March 2024
This is part of 1 collection: -
Assessment of Delamination Damage in Carbon Fibre Reinforced Polymer Composites with a Fastener Under Multiple Lightning Strike Conditions
Authors (first, second and last of 7)
- Xiangyu Tian
- Jinru Sun
- Jingliang Chen
- Content type: OriginalPaper
- Published: 04 March 2024
-
Research on the Influence of Yarn Reduction on the Bending Performance of Three-dimensional Woven Composites
Authors (first, second and last of 11)
- Chao Li
- Haili Zhou
- Guangming Zhou
- Content type: Research
- Published: 29 February 2024
-
Impact Behavior Analysis of Luffa/Epoxy Composites Under Low-Velocity Loading
Authors (first, second and last of 5)
- Massinissa Grabi
- Ahmed Chellil
- Abdelkader Nour
- Content type: Research
- Published: 29 February 2024
-
Investigation of a 3D Printing Method for Continuous Carbon Fiber-Reinforced Thermosetting Epoxy Composite
Authors (first, second and last of 6)
- Haiguang Zhang
- Dugang Li
- Jinhe Wang
- Content type: OriginalPaper
- Published: 24 February 2024
-
Observation of Damage Initiation for Trans-laminar Fracture Using in situ Fast Synchrotron X-ray Radiography and ex situ X-ray Computed Tomography
Authors (first, second and last of 5)
- Xiaodong Xu
- Nathanael Leung
- Tan Sui
- Content type: Research
- Open Access
- Published: 21 February 2024
-
Optimization of Hot Gas Welding of Hybrid Thermoplastic-Thermoset Composites Using Taguchi Method
Authors (first, second and last of 4)
- Grete Steiner
- Dominik Kuttner
- Michael Thor
- Content type: Research
- Open Access
- Published: 19 February 2024
-
Influence of the Textile Reinforcement on the Joint Formation of Pin-Joined Composite/Metal Parts
Authors
- Julian Popp
- Dietmar Drummer
- Content type: OriginalPaper
- Open Access
- Published: 17 February 2024
-
Multi-Cellular 3D Flat-Knitted Composite Panels Strengthened by PU-Foam: Manufacturing, Testing and Simulating
Authors
- Atefeh Raji
- Hossein Hasani
- Sanaz Hassanzadeh
- Content type: Research
- Published: 14 February 2024
-
Impact and Post-Impact Damage Response of Interlayer Nonwoven Reinforced Hybrid Composites
Authors
- TebernuÅŸ Tiyek
- Gaye Kaya
- Content type: Research
- Published: 14 February 2024
-
An Efficient Optimization Method for Stacking Sequence of Composite Pressure Vessels Based on Artificial Neural Network and Genetic Algorithm
Authors (first, second and last of 10)
- Jianguo Liang
- Zemin Ning
- Chunxiang Miao
- Content type: Research
- Published: 11 February 2024
-
Design of Z-fiber Guiding Needle for Composite Material Preform with Large-Thickness and High-Density
Authors (first, second and last of 5)
- Rui Jia
- Junwei Qi
- Guannan Li
- Content type: Research
- Published: 04 February 2024
-
Investigating the Influence of Tufting Parameters on the Lap Joint Strength of Composite Parts Assembled Using Tufting Technology
Authors (first, second and last of 6)
- Jian Hu
- Chan Hui
- Peng Wang
- Content type: OriginalPaper
- Published: 01 February 2024
-
Damage Recognition of Acoustic Emission and Micro-CT Characterization of Bi-adhesive Repaired Composites Based on the Machine Learning Method
Authors (first, second and last of 5)
- Xiao-long Ji
- Yu-jiao Liang
- Wei Zhou
- Content type: OriginalPaper
- Published: 31 January 2024
-
Copper Modified Boron Nitride And Graphene Combined To Self-Assemble Three-Dimensional Thermal Conductivity Framework to Improve the Thermal Conductivity of Epoxy Resin
Authors (first, second and last of 7)
- Shuo Li
- Wei Wu
- Xintong Zhao
- Content type: Research
- Published: 22 January 2024
-
Effects of Energy Director Types on the Interface Morphology and Tensile Properties of Ultrasonically Welded CF/PAEK Joints
Authors (first, second and last of 6)
- Li Xiao
- Binbin Li
- Xiaohong Zhan
- Content type: Research
- Published: 18 January 2024
-
Design and Development of 2D Woven Auxetic Fabric and Composites Based on Wave Form Geometry
Authors (first, second and last of 4)
- Shivangi Shukla
- Jaya Sharma
- B. K. Behera
- Content type: OriginalPaper
- Published: 12 January 2024
-
Preparation of Small-Diameter Phenolic-Based CFRP Rods Using Multi-Die Pultrusion
Authors (first, second and last of 5)
- Guannan Li
- Junwei Qi
- Rui Jia
- Content type: Research
- Published: 12 January 2024
-
Mechanical Properties and Failure Characteristics of Hybrid Bonded-Bolted GFRP/Al Joints under Dynamic Tensile load
Authors (first, second and last of 7)
- Hao Li
- Wei Du
- Shipeng Li
- Content type: Research
- Published: 05 January 2024
-
Exploring Flexural Performances of Fused Filament Fabrication 3D-Printed ABS and ABS-Composites through Innovative Bio-Inspired Processing Parameter Optimization
Authors
- Zhaogui Wang
- Kexuan Zhou
- Chengping Bi
- Content type: Research
- Published: 05 January 2024
-
Tensile Behavior of Double-Hole CFRP Composite with Different Holes Position
Authors (first, second and last of 4)
- Jiajin Zhang
- Yuxuan He
- Dong Wang
- Content type: Research
- Published: 05 January 2024
For authors
Submit manuscriptWorking on a manuscript?
Avoid the most common mistakes and prepare your manuscript for journal editors.
Learn more