Abstract
This modeling paper describes the roles of filler network and imperfect interfacial adhesion between polymer matrix and nanoparticles in the tensile modulus and yield strength of polymer/carbon nanotube (CNT) nanocomposites (PCNT). The percolation threshold (\( \phi_{\text{p}} \)) is assumed by the aspect ratio of the CNT; also, both the critical length of the nanotubes. Crucial for effective stress transfer from matrix to filler (Lc). and the interfacial shear strength (τ) reflect the incomplete interfacial adhesion. Two known micromechanics models are used to examine the influences of these parameters on the tensile modulus and yield strength of PCNT. The lowest ranges of \( \phi_{\text{p}} \) and Lc produce the highest levels of mechanical properties, while τ cannot affect the mechanical performance. The main reasons for these occurrences are explained in order to clarify the roles of the filler network and interfacial adhesion in the modulus and strength of PCNT.
Similar content being viewed by others
References
A. Farahi, G.D. Najafpour, and A. Ghoreyshi, JOM 71, 285 (2019).
Y. Zare and K.Y. Rhee, JOM 71, 3980 (2019).
A. Adegbenjo, P. Olubambi, J. Westraadt, M. Lesufi, and M. Mphahlele, JOM 71, 2262 (2019).
A.M. Okoro, S.S. Lephuthing, S.R. Oke, O.E. Falodun, M.A. Awotunde, and P.A. Olubambi, JOM 71, 567 (2019).
S. Arora, M. Rekha, A. Gupta, and C. Srivastava, JOM 70, 2590 (2018).
S.M. Naghib, M. Rabiee, and E. Omidinia, Int. J. Electrochem. Sci. 9, 2301 (2014).
Y. Zare and K.Y. Rhee, Compos. Part B 156, 100 (2019).
Y. Zare and K.Y. Rhee, Polym. Compos. 40, 4135 (2019).
R. Salahandish, A. Ghaffarinejad, S.M. Naghib, K. Majidzadeh-A, and A. Sanati-Nezhad, IEEE Sens. J. 18, 2513 (2018).
E. Askari and S.M. Naghib, Int. J. Electrochem. Sci. 13, 886 (2018).
A.H.Z. Kalkhoran, O. Vahidi, and S.M. Naghib, Euro. J. Pharm. Sci. 111, 303 (2018).
P.S. Bharadiya, M.K. Singh, and S. Mishra, JOM 71, 838 (2019).
B.G. Compton, N.S. Hmeidat, R.C. Pack, M.F. Heres, and J.R. Sangoro, JOM 70, 292 (2018).
S.M. Naghib, Micro Nano Lett. 14, 462 (2019).
A.K. Kasar, G. Xiong, and P.L. Menezes, JOM 70, 829 (2018).
S.M. Naghib, E. Parnian, H. Keshvari, E. Omidinia, and M. Eshghan-Malek, Int. J. Electrochem. Sci. 13, 1013 (2018).
A.H.Z. Kalkhoran, S.M. Naghib, O. Vahidi, and M. Rahmanian, Biomed. Phys. Eng. Express 4, 055017 (2018).
X. Tian, Y. Hu, J. Zhang, X. Guo, R. Bai, and L. Zhao, J. Mater. Sci. 54, 14975 (2019).
Y. Zare and K.Y. Rhee, Compos. Part B 175, 107132 (2019).
Y. Zare and K.Y. Rhee, Compos. Part B 161, 601 (2019).
Y. Zare, S.P. Park, and K.Y. Rhee, Results Phys. 13, 102245 (2019).
A. Rostami, F. Eskandari, M. Masoomi, and M. Nowrouzi, J. Oil Gas Petrochem. Technol. 6, 28 (2019).
A. Rostami, M. Vahdati, and H. Nazockdast, Polym. Compos. 39, 2356 (2018).
R. Razavi, Y. Zare, and K.Y. Rhee, Polym. Compos. 40, 801 (2019).
M. Jomaa, L. Roiban, D. Dhungana, J. Xiao, J. Cavaillé, L. Seveyrat, L. Lebrun, G. Diguet, and K. Masenelli-Varlot, Compos. Sci. Technol. 171, 103 (2019).
G. Santoro, M.A. Gomez, C. Marco, and G. Ellis, Macromol. Mater. Eng. 295, 652 (2010).
A. Alian, S. El-Borgi, and S. Meguid, Comput. Mater. Sci. 117, 195 (2016).
Y. Zare and K.Y. Rhee, Compos. Part B 158, 162 (2019).
Y. Zare and K. Rhee, Phys. Mesomech. 21, 351 (2018).
S.S.E. Bakhtiari, S. Karbasi, S.A.H. Tabrizi, and R. Ebrahimi-Kahrizsangi, Polym. Compos. 40, E1622 (2019).
S. Kim, Y. Zare, H. Garmabi, and K.Y. Rhee, Sens. Actuators A 274, 28 (2018).
C. Wan and B. Chen, J. Mater. Chem. 22, 3637 (2012).
M.M. Shokrieh and R. Rafiee, Compos. Struct. 92, 647 (2010).
Y. Zare, S. Rhim, H. Garmabi, and K.Y. Rhee, J. Mech. Behav. Biomed. Mater. 80, 164 (2018).
Y. Zare, K.Y. Rhee, and S.-J. Park, J. Ind. Eng. 69, 331 (2019).
R. Shokri-Oojghaz, R. Moradi-Dastjerdi, H. Mohammadi, and K. Behdinan, Polym. Compos. 40, E1918 (2019).
H. Daghigh and V. Daghigh, Polym. Compos. 40, E1479 (2019).
Y. Zare and K.Y. Rhee, JOM 71, 3989 (2019).
X. Ma, Y. Zare, and K.Y. Rhee, Nanoscale Res. Lett. 12, 621 (2017).
S. Gupta, R. Sachan, A. Bhaumik, and J. Narayan, Nanotechnology 29, 45LT02 (2018).
J. Narayan, S. Gupta, A. Bhaumik, R. Sachan, F. Cellini, and E. Riedo, MRS Commun. 8, 428 (2018).
S. Gupta, R. Sachan, A. Bhaumik, P. Pant, and J. Narayan, MRS Commun. 8, 533 (2018).
Y. Zare, K.Y. Rhee, and S.-J. Park, Results Phys. 14, 1 (2019).
Y. Zare and K.Y. Rhee, J. Alloys Compd. 793, 1 (2019).
J. Sandler, J. Kirk, I. Kinloch, M. Shaffer, and A. Windle, Polymer 44, 5893 (2003).
E. Garboczi, K. Snyder, J. Douglas, and M. Thorpe, Phys. Rev. E 52, 819 (1995).
V. Favier, H. Chanzy, and J. Cavaille, Macromolecules 28, 6365 (1995).
C.J. Plummer, M. Rodlert, J.-L. Bucaille, H.J. Grünbauer, and J.-A.E. Månson, Polymer 46, 6543 (2005).
X.-F. Wu and Y.A. Dzenis, J. Appl. Phys. 98, 093501 (2005).
J. Åström, J. Mäkinen, M.J. Alava, and J. Timonen, Phys. Rev. E 61, 5550 (2000).
A.P. Chatterjee, J. Appl. Phys. 100, 054302 (2006).
D. Shia, C. Hui, S. Burnside, and E. Giannelis, Polym. Compos. 19, 608 (1998).
J. Halpin and J. Kardos, J. Appl. Phys. 43, 2235 (1972).
W.D. Callister and D.G. Rethwisch, Materials Science and Engineering: An Introduction (New York: Wiley, 2007).
Y. Zare, RSC Adv. 6, 57969 (2016).
Y. Zare, Mech. Mater. 85, 1 (2015).
Y. Zhong, J. Wang, Y.M. Wu, and Z. Huang, Compos. Sci. Technol. 64, 1353 (2004).
P. Joshi and S. Upadhyay, Comput. Mater. Sci. 87, 267 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zare, Y., Rhee, K.Y. Modeling the Effects of Filler Network and Interfacial Shear Strength on the Mechanical Properties of Carbon Nanotube-Reinforced Nanocomposites. JOM 72, 2184–2190 (2020). https://doi.org/10.1007/s11837-020-04083-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-020-04083-x