Abstract
A kinetic study and optimization of pine wood peroxide fractionation in the medium acetic acid–water over TiO2 catalyst were accomplished for the first time. Kinetic regularities and the product composition of green processes of catalytic peroxide fractionation of softwood (pine, abies, larch) and hardwood (aspen, birch) over 1 wt% TiO2 catalyst in the acetic acid–water medium were compared at the temperature range 70–100 °C. For all type of wood, the processes of peroxide delignification are described by the first order equations and their activation energies are varied at the range 76–94 kJ/mol. According to FTIR, XRD, SEM, NMR data, the cellulosic products of peroxide delignification have a structure similar to microcrystalline cellulose regardless of the nature of wood. Soluble products are presented by organic acid and monosaccharides. The scheme of green biorefinery of pine wood based on extractive-catalytic fractionation of wood biomass on microcrystalline cellulose, hemicelluloses, aromatic and aliphatic acids, monosaccharides, turpentine and rosin was developed. Green and non-toxic reagents and solid catalyst are used in the developed scheme of biorefinery.
Similar content being viewed by others
References
Introduction to Chemicals from Biomass (2008) Wiley series in renewable resources. John Wiley & Sons, Ltd, Chichester
Nelson V (2011) Introduction to renewable energy. Energy and the environment. CRS Press, London
Fengel D, Wegener G (1984) Wood chemistry, ultrastracture, reactions. Walter de Gruter, Berlin
Gallezot P (2007) Catalytic routes from renewables to fine chemicals. Catal Today 121(1):76–91
Serrano-Ruiz JC, Dumesic JA (2011) Catalytic routes for the conversion of biomass into liquid hydrocarbon transportation fuels. Energy Environ Sci 4(1):83–99
Besson M, Gallezot P, Pinel C (2014) Conversion of biomass into chemicals over metal catalysts. Chem Rev 114(3):1827–1870
Zakzeski J, Bruijnincx PCA, Jongerius AL, Weckhuysen BM (2010) The catalytic valorization of lignin for the production of renewable chemicals. Chem Rev 110(6):3552–3599
Cherubini F, Jungmeier G, Wellisch M, Willke T, Skiadas I, Ree RV, Jong ED (2009) Toward a common classification approach for biorefinery systems. Biofuels Bioprod Biorefining 3(5):534–546
de Long E, Hidson A, Walsh P (2013) Task 42. Biorefinery. In: Report IEA bioenergy
Tarabanko VE, Kaygorodov KL, Skiba EA, Tarabanko N, Chelbina YV, Baybakova OV, Kuznetsov BN, Djakovitch L (2017) Processing pine wood into vanillin and glucose by sequential catalytic oxidation and enzymatic hydrolysis. J Wood Chem Technol 37(1):43–51
Van den Bosch S, Schutyser W, Vanholme R, Driessen T, Koelewijn SF, Renders T, De Meester B, Huijgen WJJ, Dehaen W, Courtin CM, Lagrain B, Boerjan W, Sels BF (2015) Reductive lignocellulose fractionation into soluble lignin-derived phenolic monomers and dimers and processable carbohydrate pulps. Energy Environ Sci 8(6):1748–1763
Galkin MV, Samec JSM (2016) Lignin valorization through catalytic lignocellulose fractionation: a fundamental platform for the future biorefinery. ChemSusChem 9:1544–1558
Anderson EM, Katahira R, Reed M, Resch MG, Karp EM, Beckham GT, Román-Leshkov Y (2016) Reductive catalytic fractionation of corn stover lignin. ACS Sustain Chem Eng 4(12):6940–6950
Kuznetsov BN, Sudakova IG, Garyntseva NV, Djakovitch L, Pinel C (2017) Kinetic studies and optimization of abies wood fractionation by hydrogen peroxide under mild conditions with TiO2 catalyst. Reac Kinet Mech Cat 120(1):81–94
Kuznetsov BN, Chesnokov NV, Yatsenkova OV, Sharypov VI, Garyntseva NV, Ivanchenko NM, Yakovlev VA (2017) Green catalytic valorization of hardwood biomass into valuable chemicals with the use of solid catalysts. Wood Sci Technol 51(5):1189–1208
Kuznetsov BN, Sudakova IG, Garyntseva NV, Levdansky VA, Ivanchenko NM, Pestunov AV, Djakovitch L, Pinel C (2018) Green biorefinery of larch wood biomass to obtain the bioactive compounds, functional polymers and nanoporous materials. Wood Sci Technol 52(5):1377–1394
Sjöström E, Alén R (1999) Analytical methods in wood chemistry, pulping and papermaking. Springer Series in Wood Science. Springer, Berlin
Park S, Baker JO, Himmel ME, Parilla PA, Johnson DK (2010) Cellulose crystallinity index: measurement techniques and their impact on interpreting cellulase performance. Biotechnol Biofuels 3(1):10
Trache D, Hussin MH, Hui Chuin CT, Sabar S, Fazita MRN, Taiwo OFA, Hassan TM, Haafiz MKM (2016) Microcrystalline cellulose: isolation, characterization and bio-composites application—a review. Int J Biol Macromol 93:789–804
Suchy M, Argyropoulos D (2002) Catalysis and activation of oxygen and peroxide delignification of chemical pulps: a review. Tappi 1(2):1–18
Kuznetsov BN, Sudakova IG, Garyntseva NV, Djakovitch L, Pinel C (2013) Kinetic study of aspen-wood sawdust delignification by H2O2 with sulfuric acid catalyst under mild conditions. Reac Kinet Mech Cat 110(2):271–280
Kuznetsov BN, Chesnokov NV, Garyntseva NV, Sudakova IG, Pestunov AV, D’yakovich L, Pinel’ K (2018) Kinetic study and optimization of catalytic peroxide delignification of aspen wood. Kinet Catal 59(1):48–57
Kuznetsov BN, Chesnokov NV, Sudakova IG, Garyntseva NV, Kuznetsova SA, Malyar YN, Yakovlev VA, Djakovitch L (2018) Green catalytic processing of native and organosolv lignins. Catal Today 309:18–30
Hu F, Jung S, Ragauskas A (2012) Pseudo-lignin formation and its impact on enzymatic hydrolysis. Bioresour Technol 117:7–12
Adel AM, Abd El-Wahab ZH, Ibrahim AA, Al-Shemy MT (2011) Characterization of microcrystalline cellulose prepared from lignocellulosic materials. Part II: physicochemical properties. Carbohydr Polym 83(2):676–687
Fan M, Dai D, Huang B (2012) Fourier transform infrared spectroscopy for natural fibres. In: Salih S (ed) International conference on innovative technologies (IN-TECH 2012). Rejeka, Croatia, pp 45–68
Nishiyama Y, Langan P, Chanzy H (2002) Crystal structure and hydrogen-bonding system in cellulose Iβ from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 124(31):9074–9082
Vasiliu-Oprea C, Nicoleanu J (1993) Micronized (and microcrystalline) celluloses. Obtainment and fields of application. Polym Plast Technol Eng 32(3):181–214
Wikberg H, Liisa Maunu S (2004) Characterisation of thermally modified hard- and softwoods by 13C CPMAS NMR. Carbohydr Polym 58(4):461–466
Zuckerstatter G, Schild G, Wollboldt P, Roeder T, Weber HK, Sixta H (2009) The elucidation of cellulose supramolecular structure by 13C CP-MAS NMR. Lenzing Ber 87:38–46
Liu D, Chen EYX (2014) Integrated catalytic process for biomass conversion and upgrading to C12 furoin and alkane fuel. ACS Catal 4(5):1302–1310
Schutyser W, Renders T, Van den Bosch S, Koelewijn SF, Beckham GT, Sels BF (2018) Chemicals from lignin: an interplay of lignocellulose fractionation, depolymerisation, and upgrading. Chem Soc Rev 47(3):852–908
Alonso DM, Hakim SH, Zhou S, Won W, Hosseinaei O, Tao J, Garcia-Negron V, Motagamwala AH, Mellmer MA, Huang K, Houtman CJ, Labbé N, Harper DP, Maravelias CT, Runge T, Dumesic JA (2017) Increasing the revenue from lignocellulosic biomass: maximizing feedstock utilization. Sci Adv 3(5):e1603301
Silvestre AJ, Gandini A (2008) Monomers, polymers and composites from renewable resources. Elsevier, Amsterdam
Mercier B, Prost J, Prost M (2009) The essential oil of turpentine and its major volatile fraction (α- and β-pinenes): a review. Int J Occup Med Environ Health 22(4):331–342
Acknowledgements
This work is a part of GDRI “Biomass” between France and Russia.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kuznetsov, B.N., Sudakova, I.G., Garyntseva, N.V. et al. Catalytic peroxide fractionation processes for the green biorefinery of wood. Reac Kinet Mech Cat 126, 717–735 (2019). https://doi.org/10.1007/s11144-018-1518-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11144-018-1518-6