Abstract
SrFe12O19 hexaferrite thick films were prepared by tape casting method followed by a two-step sintering process. X-Ray diffractometer, field emission scanning electron microscope and vibrating sample magnetometer were used to investigate the microstructure and magnetic properties of samples. Results show that high density films with nanocrystalline grains, high crystallographic c-axis orientation of crystals perpendicular to the film plane with high squareness (M r/M s = 0.93) and moderate coercivity (H c = 3,750 Oe) can be obtained with two-step sintering. Grains growth is controllable by this sintering method. The average grain size of the films strongly depends on final stage of sintering and quality of starting powders and ranging between 0.5 and 10 μm. The thick films with starting powders from coprecipitation method are denser with smaller grain size rather than those with starting powders from solid state reactions. This work reveals the feasibility of fabrication of thick hexaferrite films with a simple and effective method for next generation of self-biased planar microwave devices.
Similar content being viewed by others
References
V.G. Harris et al., J. Magn. Magn. Mater. 321, 2035 (2009)
Y. Chen, T. Sakai, T. Chen, S.D. Yoon, C. Vittoria, V.G. Harris, J. Appl. Phys. 100, 043907 (2006)
J.D. Adam, L.E. Davis, G.F. Dionne, E.F. Schloemann, S.N. Stitzer, IEEE Trans. Microw. Theory Tech. 50, 721 (2002)
F. Tabatabaie, M.H. Fathi, A. Saatchi, A. Ghasemi, J. Alloys Compd. 474, 206 (2009)
Y. Akaiwa, T. Okazaki, IEEE Trans. Magn. 10, 374 (1974)
S.G. Wang, S.D. Yoon, C. Vittoria, J. Appl. Phys. 92, 6728 (2002)
Y. Chen, T. Sakai, T. Chen, S.D. Yoon, A.L. Geiler, C. Vittoria, V.G. Harris, Appl. Phys. Lett. 88, 062516 (2006)
Z. Xu, Z. Lan, G. Zhu, K. Sun, Z. Yu, J. Alloys Compd. 538, 11 (2012)
Z. Chen et al., Appl. Phys. Lett. 91, 182505 (2007)
Z. Cai, T.L. Goodrich, B. Sun, Z. Chen, V.G. Harris, K.S. Ziemer, J. Phys. D Appl. Phys. 43, 095002 (2010)
A.Y. Kranov, A. Abuzir, T. Prakash, D.N. McIlroy, W.J. Yeh, IEEE Trans. Magn. 42, 3338 (2006)
Y. Chen, I. Smith, A.L. Geiler, C. Vittoria, V. Zagorodnii, Z. Celinski, V.G. Harris, J. Phys. D Appl. Phys. 41, 095006 (2008)
I.W. Chen, X.H. Wang, Nature 404, 168 (2000)
M. Mazaher, M. Valefi, Z.R. Hesabi, S.K. Sadrnezhaad, Ceram. Int. 35, 13 (2009)
M. Mazaheri, A.M. Zahedi, S.K. Sadrnezhaad, J. Am. Ceram. Soc. 91, 56 (2008)
X.-H. Wang, P.-L. Chen, I.-W. Chenw, Am. Ceram. Soc. 89, 431 (2006)
Y.-I. Lee, Y.-W. Kim, M. Mitomo, J. Mater. Sci. 39, 3801 (2004)
Z. Razavi Hesabi, M. Mazaheri, T. Ebadzadeh, J. Alloys Compd. 494, 362 (2010)
P.L. Chen, I.W. Chen, J. Am. Ceram. Soc. 80, 637 (1997)
L. Czubayko, V.G. Sursaeva, G. Gottstein, L.S. Shvindlerman, Acta Mater. 46, 5863 (1998)
G. Shi-ju, Theory of Powder Sintering (Metallurgy Industry Publishing Company, Beijing, 1998)
Acknowledgments
The authors would like to thank the Office of Graduate Studies of the University of Isfahan for their support. E. Kiani would like to thank the Iranian Nanotechnology Initiative Council for their support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kiani, E., Yousefi, M.H. & Rozatian, A.S.H. Microstructural and magnetic properties of self-biased strontium hexaferrite thick films by two-step sintering. J Mater Sci: Mater Electron 24, 1617–1623 (2013). https://doi.org/10.1007/s10854-012-0985-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10854-012-0985-1