Abstract
To expound the effects of existing endogenous or exogenous lignin on the performance of cellulose-based aerogels, both the cellulose aerogels and composite aerogels were fabricated by the dissolution-regeneration process by using LiCl/DMSO solvent system. The varying content of endogenous and exogenous lignin could lead to different aggregation states of cellulose, hemicellulose and lignin, thus causing different micromorphology and mechanical properties of cellulose aerogels and composite aerogels. The increased endogenous lignin in lignocellulose restricted the dissociation of cellulose and hemicellulose in dissolving process, which led to the appearance of enlarged pores, and then resulted in the decreased mechanical strength. However, for composite aerogels, externally added exogenous lignin deposited on the cellulose chains and then restricted the movement of polymer chains. It could not only bring about the increased pore size of aerogels, but also help to improve the mechanical strength, which was different from that of cellulose aerogels. Furthermore, two types of aerogels with higher lignin content both exhibited better adsorption capacity for methylene blue, especially for composite aerogel. This study provides a feasible way to tailor the morphology and physical properties of the aerogels by controlling the existential state or content of lignin.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Aaltonen O, Jauhiainen O (2009) The preparation of lignocellulosic aerogels from ionic liquid solutions. Carbohydr Polym 75:125–129. https://doi.org/10.1016/j.carbpol.2008.07.008
Akar E, Altınışık A, Seki Y (2012) Preparation of pH- and ionic-strength responsive biodegradable fumaric acid crosslinked carboxymethyl cellulose. Carbohydr Polym 90:1634–1641. https://doi.org/10.1016/j.carbpol.2012.07.043
Anderson G, Gaspar AR, Sofía C, Lucia LA, Claudia C, Argyropoulos DS (2007) On the propensity of lignin to associate: a size exclusion chromatography study with lignin derivatives isolated from different plant species. Phytochemistry 68:2570–2583. https://doi.org/10.1016/j.phytochem.2007.05.026
Behin J, Rajabi L, Etesami H, Nikafshar S (2018) Enhancing mechanical properties of epoxy resin using waste lignin and salicylate alumoxane nanoparticles. Korean J Chem Eng 35:602–612. https://doi.org/10.1007/s11814-017-0301-0
Bian H, Gao Y, Wang R, Liu Z, Wu W, Dai H (2018a) Contribution of lignin to the surface structure and physical performance of cellulose nanofibrils film. Cellulose 25:1309–1318. https://doi.org/10.1007/s10570-018-1658-x
Bian H, Wei L, Lin C, Ma Q, Dai H, Zhu JY (2018b) Lignin-containing cellulose nanofibril-reinforced polyvinyl alcohol hydrogels. ACS Sustain Chem Eng 6:4821–4828. https://doi.org/10.1021/acssuschemeng.7b04172
Cai J, Kimura S, Wada M, Kuga S, Zhang L (2010) Cellulose aerogels from aqueous alkali hydroxide-urea solution. Chemsuschem 1:149–154. https://doi.org/10.1002/cssc.200700039
Cai H, Sharma S, Liu W, Mu W, Liu W, Zhang X, Deng Y (2014) Aerogel microspheres from natural cellulose nanofibrils and their application as cell culture scaffold. Biomacromol 15:2540–2547. https://doi.org/10.1021/bm5003976
Chang C, Zhang L (2011) Cellulose-based hydrogels: present status and application prospects. Carbohyd Polym 84:40–53. https://doi.org/10.1016/j.carbpol.2010.12.023
Chao W, Ye X, Fan B, Yao Q, Wang H, Jin C, Sun Q (2015) Cellulose as an adhesion agent for the synthesis of lignin aerogel with strong mechanical performance, sound-absorption and thermal insulation. Sci Rep 6:32383. https://doi.org/10.1038/srep32383
Chen M, Zhang X, Zhang A, Liu C, Sun R (2016) Direct preparation of green and renewable aerogel materials from crude bagasse. Cellulose 23:1325–1334. https://doi.org/10.1007/s10570-015-0814-9
Domínguez-Robles J, Peresin MS, Tamminen T, Rodríguez A, Larrañeta E, Jääskeläinen A-S (2018) Lignin-based hydrogels with “super-swelling” capacities for dye removal. Int J Biol Macromol 115:1249–1259. https://doi.org/10.1016/j.ijbiomac.2018.04.044
Fu J et al (2015) Adsorption of methylene blue by a high-efficiency adsorbent (polydopamine microspheres): kinetics, isotherm, thermodynamics and mechanism analysis. Chem Eng J 259:53–61. https://doi.org/10.1016/j.cej.2014.07.101
Ghaffar SH, Fan M (2014) Lignin in straw and its applications as an adhesive. Int J Adhes Adhes 48:92–101. https://doi.org/10.1016/j.ijadhadh.2013.09.001
Heath L, Thielemans W (2010) Cellulose nanowhisker aerogels. Green Chem 12:1448–1453. https://doi.org/10.1039/C0GC00035C
Jesús EPA, Sabino MA (2010) Effect of the presence of lignin or peat in IPN hydrogels on the sorption of heavy metals. Polym Bull 65:495–508. https://doi.org/10.1007/s00289-010-0264-3
Jouanin L, Lapierre C (2012) Lignins: biosynthesis, biodegradation and bioengineerin. Academic Press, London
Li J, Lu Y, Yang D, Sun Q, Liu Y, Zhao H (2011) Lignocellulose aerogel from wood-ionic liquid solution (1-allyl-3-methylimidazolium chloride) under freezing and thawing conditions. Biomacromolecules 12:1860–1867. https://doi.org/10.1021/bm200205z
Li H et al (2017) High modulus, strength, and toughness polyurethane elastomer based on unmodified lignin. ACS Sustain Chem Eng 5:7942–7949. https://doi.org/10.1021/acssuschemeng.7b01481
Lindström T, Westman L (1982) The colloidal behaviour of kraft lignin. Colloid Polym Sci 260:594–598. https://doi.org/10.1007/BF01422591
Liu J, Zhang L, Yang Z, Zhao X (2011) Controlled release of paclitaxel from a self-assembling peptide hydrogel formed in situ and antitumor study in vitro. Int J Nanome 6:2143–2153. https://doi.org/10.2147/IJN.S24038
Liu Z, Cao Y, Wang Z, Ren H, Amidon TE, Lai Y (2015) The utilization of soybean straw. II. Dissolution and regeneration of soybean straw in LiCl/DMSO. Bioresources 10:2305–2317. https://doi.org/10.15376/biores.10.2.2305-2317
Liu L et al (2016a) Robust self-standing chitin nanofiber/nanowhisker hydrogels with designed surface charges and ultralow mass content via gas phase coagulation. Biomacromolecules 17:3773–3781. https://doi.org/10.1021/acs.biomac.6b01278
Liu Z, Meng L, Chen J, Cao Y, Wang Z, Ren H (2016b) The utilization of soybean straw III: isolation and characterization of lignin from soybean straw. Biomass Bioenerg 94:12–20. https://doi.org/10.1016/j.biombioe.2016.07.021
Liu Q et al (2017) Isolation of high-purity cellulose nanofibers from wheat straw through the combined environmentally friendly methods of steam explosion, microwave-assisted hydrolysis, and microfluidization. ACS Sustain Chem Eng 5:6183–6191. https://doi.org/10.1021/acssuschemeng.7b01108
Liu Z, Wu J, Xia J, Dai H, Cao Y, Wang Z (2019) Characterization of lignocellulose aerogels fabricated using a LiCl/DMSO solution. Ind Crop Prod 131:293–300. https://doi.org/10.1016/j.indcrop.2019.01.057
Loeb L, Segal L (1955) Studies of the ethylenediamine-cellulose complex. I. Decomposition of the complex by solvents. J Polym Sci 15:343–354. https://doi.org/10.1002/pol.1955.120158003
Long LY, Weng YX, Wang YZ (2018) Cellulose aerogels: synthesis, applications, and prospects. Polymers 10:623. https://doi.org/10.3390/polym10060623
Lu Y et al (2012) Fabrication of mesoporous lignocellulose aerogels from wood via cyclic liquid nitrogen freezing–thawing in ionic liquid solution. J Mater Chem 22:13548–13557. https://doi.org/10.1039/C2JM31310C
Luo H, Ren S, Ma Y, Fang G, Jiang G (2015) Preparation and properties of kraft lignin-N-isopropyl acrylamide hydrogel. Bioresources 10:3507–3519. https://doi.org/10.15376/biores.10.2.3507-3519
Ma Z, Li Q, Yue Q, Gao B, Xu X, Zhong Q (2011) Synthesis and characterization of a novel super-absorbent based on wheat straw. Bioresource Technol 102:2853–2858. https://doi.org/10.1016/j.biortech.2010.10.072
Malafaya PB, Silva GA, Rui LR (2007) Natural–origin polymers as carriers and scaffolds for biomolecules and cell delivery in tissue engineering applications. Adv Drug Deliver Rev 59:207–233. https://doi.org/10.1016/j.addr.2007.03.012
Mi Q, Ma S, Yu J, He J, Zhang J (2016) Flexible and transparent cellulose aerogels with uniform nanoporous structure by a controlled regeneration process. ACS Sustain Chem Eng 4:656–660. https://doi.org/10.1021/acssuschemeng.5b01079
Mohammed N, Grishkewich N, Berry RM, Tam KC (2015) Cellulose nanocrystal–alginate hydrogel beads as novel adsorbents for organic dyes in aqueous solutions. Cellulose 22:3725–3738. https://doi.org/10.1007/s10570-015-0747-3
Park CH, Kang YK, Im SS (2004) Biodegradability of cellulose fabrics. J Appl Polym Sci 94:248–253. https://doi.org/10.1002/app.20879
Park S et al (2015) Application of cellulose/lignin hydrogel beads as novel supports for immobilizing lipase. J Mol Catal B-Enzym 119:33–39. https://doi.org/10.1016/j.molcatb.2015.05.014
Qian S, Sheng K (2017) PLA toughened by bamboo cellulose nanowhiskers: role of silane compatibilization on the PLA bionanocomposite properties. Compos Sci Technol 148:59–69. https://doi.org/10.1016/j.compscitech.2017.05.020
Roxane G, Tatiana B (2008) Aerocellulose: new highly porous cellulose prepared from cellulose–NaOH aqueous solutions. Biomacromolecules 9:269–277. https://doi.org/10.1021/bm700972k
Sescousse R, Budtova T (2009) Influence of processing parameters on regeneration kinetics and morphology of porous cellulose from cellulose–NaOH–water solutions. Cellulose 16:417–426. https://doi.org/10.1007/s10570-009-9287-z
Sescousse R, Smacchia A, Budtova T (2010) Influence of lignin on cellulose–NaOH–water mixtures properties and on Aerocellulose morphology. Cellulose 17:1137–1146. https://doi.org/10.1007/s10570-010-9448-0
Shankar S, Reddy JP, Rhim JW (2015) Effect of lignin on water vapor barrier, mechanical, and structural properties of agar/lignin composite films. Int J Biol Macromol 81:267–273. https://doi.org/10.1016/j.ijbiomac.2015.08.015
Shen Z, Han G, Wang X, Luo J, Sun R (2016) An ultra-light antibacterial bagasse–AgNP aerogel. J Mater Chem B 5:1155–1158. https://doi.org/10.1039/c6tb02171a
Sing KSW (1985) Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity (Recommendations 1984). Pure Appl Chem 57:603–619. https://doi.org/10.1351/pac198557040603
Sluiter A, Hames B, Ruiz R, Scarlata C, Sluiter J, Templeton D, Crocker D (2011) Determination of structural carbohydrates and lignin in biomass. Technical report NREL/TP-510-42618. National Renewable Energy Laboratory, USA
Wach RA, Mitomo H, Yoshii F, Kume T (2001) Hydrogel of biodegradable cellulose derivatives. II. Effect of some factors on radiation-induced crosslinking of CMC. J Appl Polym Sci 81:3030–3037. https://doi.org/10.1002/app.1753
Wang Z, Yokoyama T, Matsumoto Y (2010) Dissolution of ethylenediamine pretreated pulp with high lignin content in LiCl/DMSO without milling. J Wood Chem Technol 30:219–229. https://doi.org/10.1080/02773810903477613
Wang Z, Liu S, Matsumoto Y, Kuga S (2012) Cellulose gel and aerogel from LiCl/DMSO solution. Cellulose 19:393–399. https://doi.org/10.1007/s10570-012-9651-2
Wang J, Zhou X, Xiao H (2013) Structure and properties of cellulose/poly(N-isopropylacrylamide) hydrogels prepared by SIPN strategy. Carbohydr Polym 94:749–754. https://doi.org/10.1016/j.carbpol.2013.01.036
Xia J, Liu Z, Cao Y, Wang Z (2016) Dissolution-regeneration of ethylenediamine pretreated wheat straw pulp in LiCl/DMSO. Chem Ind Forest Prod 3:101–106. https://doi.org/10.3969/j.issn.0253-2417.2016.03.015
Xia J, Zhang Z, Liu W, Li VCF, Cao Y, Zhang W, Deng Y (2018) Highly transparent 100% cellulose nanofibril films with extremely high oxygen barriers in high relative humidity. Cellulose 25:4057–4066. https://doi.org/10.1007/s1057-018-1843-y
Yang J, Han C (2016) Mechanically viscoelastic properties of cellulose nanocrystals skeleton reinforced hierarchical composite hydrogels. ACS Appl Mater Inter 8:25621–25630. https://doi.org/10.1021/acsami.6b08834
Zhang W, Zhang Y, Lu C, Deng Y (2012) Aerogels from crosslinked cellulose nano/micro-fibrils and their fast shape recovery property in water. J Mater Chem 22:11642–11650. https://doi.org/10.1039/C2JM30688C
Zhou S, Liu P, Wang M, Zhao H, Yang J, Xu F (2016) Sustainable, reusable, and superhydrophobic aerogels from microfibrillated cellulose for highly effective oil/water separation. ACS Sustain Chem Eng 4:6409–6416. https://doi.org/10.1021/acssuschemeng.6b01075
Acknowledgments
Jianyu Xia would like to thank the National Natural Science Foundation of China (No. 31600473, 31670591), the Natural Science Foundation of Jiangsu Province (BK20160928), and the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD), the Graduate student innovation project of Jiangsu Province (KYZZ16_0317) for the financial support.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xia, J., Liu, Z., Chen, Y. et al. Effect of lignin on the performance of biodegradable cellulose aerogels made from wheat straw pulp-LiCl/DMSO solution. Cellulose 27, 879–894 (2020). https://doi.org/10.1007/s10570-019-02826-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-019-02826-x