Abstract
A fine porous gold catalyst has been fabricated by selective leaching of Cu from an ordered AuCu3 intermetallic compound with 50%HNO3 aqueous solution at 50 °C. This catalyst exhibited comparable areal rate (mol min−1 m−2-cat) with the Au/TiO2 catalyst for CO oxidation. The present study demonstrates that high catalytic activity of gold is originated neither from the presence of fine dispersed Au particles nor from Au-support perimeter interface.
Similar content being viewed by others
References
Haruta M, Yamada N, Kobayashi T, Iijima S (1989) J Catal 115:301
Bond GC, Louis C, Thompson DT (2006) In: Catalysis by gold, vol 6, ch 6. Imperial College Press, London, p 161
Iizuka Y, Tode T, Takao T, Yatsu K, Takeuchi T, Tsubota S, Haruta M (1999) J Catal 187:50
Iizuka Y, Kawamoto A, Akita K, Date M, Tsubota S, Okumura M, Haruta M (2004) Catal Lett 97:203
Comotti M, Della Pina C, Matarrese R, Rossi M (2004) Angew Chem Int Ed 43:5812
Ketchie WC, Fang Y-L, Wong MS, Murayama M, Davis RJ (2007) J Catal 250:94
Erlebacher J, Aziz MJ, Karma A, Dimitrov N, Sieradzki K (2001) Nature 410:450
Zielasek V, Jürgens B, Schulz C, Biener J, Biener MM, Hamza AV, Bäumer M (2006) Angew Chem Int Ed 45:8241
Xu C, Su J, Xu X, Liu P, Zhao H, Tian F, Ding Y (2007) J Am Chem Soc 129:42
Tsai AP, Yoshimura M (2001) Appl Catal A 214:237
Kameoka S, Tanabe T, Tsai AP (2004) Catal Today 93:23
Xu Y, Kameoka S, Kishida K, Demura M, Tsai AP, Hirano T (2005) Intermetallics 13:151
Tsai AP, Kameoka S, Ishii Y (2004) J Phys Soc Jpn 73:3270
Massalski TB (Editor-in-Chief) (1990) In: Binary alloy phase diagrams, 2nd edn, vol 1. ASM International, USA, p 360
Massalski TB (1996) In: Cahn RW, Haasen P (eds) Physical metallurgy, 4th revised and enhanced edn, ch 3. Elsevier Science BV, p 195
Gold reference catalysts (2003) Gold Bull 36:24
Haruta M (2003) Chem Record 3:75
Bond GC, Thompson DT (2000) Gold Bull 33:41
Mavrikakis M, Stoltze P, Norskov JK (2000) Catal Lett 64:101
Janssens TVW, Clausen BS, Hvolbak B, Falsig H, Christensen CH, Bligaard T, Norskov JK (2007) Top Catal 44:15 and references therein
Kameoka S, Tsai AP, to be published
Acknowledgements
This work was supported in part by Grants-in-Aid for Scientific Research (A) 19206072 and (C) 19560769 from the Ministry of Education, Culture, Sports, Science and Technology (MEXT).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kameoka, S., Tsai, A.P. CO Oxidation Over a Fine Porous Gold Catalyst Fabricated by Selective Leaching from an Ordered AuCu3 Intermetallic Compound. Catal Lett 121, 337–341 (2008). https://doi.org/10.1007/s10562-007-9344-x
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10562-007-9344-x