Abstract
Generative manufacturing technologies are gaining more and more of importance as key enabling technologies in future manufacturing, especially when a flexible scalable manufacturing of small medium series of customized parts is required. The paper describes a new approach for design and manufacturing of complex three dimensional components building on a combination of additive manufacturing and e-printing technologies, where the micro component is made up of stacks of functionalized layers of polymer films. Special attention will be paid to the ā3-dā modeling approach, requested to support the applicaton developer through provision of design rules for this integrated manufacturing concept . Both, the application concept as well as the related equipment and manufacturing integration currently are currently developed further in the project SMARTLAM, funded by the European Commission.
Chapter PDF
Similar content being viewed by others
Keywords
References
Muellera, B., Kochan, D.: Laminated object manufacturing for rapid tooling and patternmaking in foundry industry. Computers in IndustryĀ 39(1), 47ā53 (1999)
Schwartz, E.: Cornell University MSE (2006), http://people.ccmr.cornell.edu/~cober/mse542/page2/files/Schwartz%20R2R%20Processing.pdf
Albers, A., Bƶrsting, P., Wildermuth, P., HauĆelt, J., Kraft, O.: In: Karlsruhe Kraft, O., Haug, A., Vollertsen, F., BĆ¼ttgenbach, S. (hrsg.) Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, Oktober 11-12. KIT Scientific Reports; 7591. KIT Scientific Publishing (2011)
Xu, X., Nee, A.Y.C.: Advanced Design and Manufacturing Based on Step. Springer (2009)
Dickerhof, M., Mampel, U., DIdic, M.: Workflow and CIMOSA, A background case study. Computers in IndustryĀ 40, 197ā205 (1999)
He, X., Gao, F., Tu, G., Hasko, D., Huettner, S., Steiner, U., Greenham, N.C., Friend, R.H., Huck, W.T.S.: Formation of Nanopatterned Polymer Blends in Photovoltaic Devices. Nano Lett.Ā 10, 1302ā1307 (2010)
He, X., Gao, F., Tu, G., Hasko, D., Huettner, S., Steiner, U., Greenham, N.C., Friend, R.H., Huck, W.T.S.: Formation of Nanopatterned Polymer Blends in Photovoltaic Devices. Nano Lett.Ā 10, 1302ā1307 (2010)
King, B., Renn, M.: Aerosol jet direct write printing for mil aero electronic applications: Source: Optomec, Inc., 3911 Singer, NE, Albuquerque, NM 87109, USA
Pfleging, W., Kohler, R., SĆ¼dmeyer, I., Rohde, M.: Laser Micro and Nano Processing of Metals, Ceramics, and Polymers. In: Laser-Assisted Fabrication of Materials. Springer Series in Materials Science, vol.Ā 161, pp. 319ā374 (2013)
Pfleging, W., Kohler, R., Schierjott, P., Hoffmann, W.: Laser patterning and packaging of CCD-CE-Chips made of PMMA. Sensors and Actuators B: ChemicalĀ 138(1), 336ā343 (2009)
Chan, Y.C., Luk, D.Y.: Effects of bonding parameters on the reliability performance of anisotropic conductive adhesive interconnects for flip-chip-on-flex packages assembly II. Different bonding pressure. Microelectronics ReliabilityĀ 42(8), 1195ā1204 (2002)
Peng, H.: Aligned Carbon Nanotube/Polymer Composite Films with Robust Flexibility, High Transparency, and Excellent Conductivity Division of Materials Physics and Applications, Los Alamos National Laboratory, Los Alamos, New Mexico 87545. J. Am. Chem. Soc.Ā 130(1), 42ā43 (2008), doi:10.1021/ja078267m
Bar-Cohen, Y.: Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, SPIE ebooks, 2nd edn. (2004), http://ebooks.spiedigitallibrary.org/book.aspx?bookid=146 (April 5, 2013)
Tahhan, I.: Ein Beitrag zum wirtschaftlichen FĆ¼gen von mikrofluidischen Baugruppen, UniversitƤtsbibliothek Freiburg, Dissertation (2009)
http://www.schott.com/epackaging/german/download/schott_db_ltcc_via_rz_d_2012_03_29indd.pdf (April 6, 2013)
http://www.convertingquarterly.com/Portals/1/files/matteucci-awards/2011-Flexible-Glass-Substrates-for-R2R-Manufacturing.pdf (April 6, 2013)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
Ā© 2014 IFIP International Federation for Information Processing
About this paper
Cite this paper
Dickerhof, M. et al. (2014). The SMARTLAM 3D-I Concept: Design of Microsystems from Functional Elements Fabricated by Generative Manufacturing Technologies. In: Ratchev, S. (eds) Precision Assembly Technologies and Systems. IPAS 2014. IFIP Advances in Information and Communication Technology, vol 435. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-662-45586-9_19
Download citation
DOI: https://doi.org/10.1007/978-3-662-45586-9_19
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-662-45585-2
Online ISBN: 978-3-662-45586-9
eBook Packages: Computer ScienceComputer Science (R0)