Abstract
This review represents a detailed and comprehensive discussion of the Thermal Field Theory (TFT) concepts and key results in Yukawatype theories. We start with a general pedagogical introduction into the TFT in the imaginary and realtime formulation. As phenomenologically relevant implications, we present a compendium of thermal decay rates for several typical reactions calculated within the framework of the realtime formalism and compared to the imaginarytime results found in the literature. Processes considered here are those of a neutral (pseudo)scalar decaying into two distinct (pseudo)scalars or into a fermionantifermion pair. These processes are extended from earlier works to include chemical potentials and distinct species in the final state. In addition, a (pseudo)scalar emission off a fermion line is also discussed. These results demonstrate the importance of thermal effects in particle decay observables relevant in many phenomenological applications in systems at high temperatures and densities.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
1 Introduction
The standard theoretical treatment of fundamental fields and their interactions primarily uses the language of quantum field theory (QFT), see for example [1,2,3]. This treatment has historically been extremely successful in describing the behaviour of all the known particles that constitute the Standard Model of particle physics. However, the theoretical framework of this zerotemperature theory does not naturally incorporate effects of the medium relevant at high temperatures and densities [4].
Currently, there is a limited understanding of particle interactions in hot and dense systems despite an enormous work done by several authors intended to develop a universal formalism for treating the mediuminduced phenomena both in and out of equilibrium. Mainly, the struggle has been to consistently calculate observables in the quarkgluon plasma or in the cosmological plasma of the early universe, exemplified by inmedium particle production and decay rates. The problem of thermal dynamics has engaged physicists for a long time, and early attempts of analysis were made by, for example, Bloch [5]. A pioneer in the realm of thermal (quantum) field theory (TFT) was Matsubara [6] who developed the imaginarytime, or Matsubara, formalism that describes equilibrated systems. This treatment has great resemblance to zerotemperature QFT in the form of the propagators, the diagrammatic structure of the perturbative expansion, and the selfenergies. It differs, however, in the way of how time is treated considering it as a purely imaginary quantity. Shortly after the developments by Matsubara, Kubo [7] and Martin and Schwinger [8] provided an important relation between propagators, the socalled KuboMartinSchwinger (KMS) condition, which holds for thermal propagators in equilibrium. Further important developments of thermal theories with equilibrated media, such as an explicit consideration of realtime evolution, were made by Keldysh [9]. As a framework for a first principle analysis, thermo field dynamics was largely developed by Matsumoto et al. [10] while a detailed investigation of QFTs at finite temperatures for real times was made by Niemi and Semenoff [11]. Comprehensive outlines of the pathintegral treatment of quantum fields in a thermal medium may be found in [11,12,13], and much of the theoretical concepts presented in this review draws upon that work. Three years before the work of Kobes and Kowalski [12], Weldon [14] provided selfenergy calculations performed using the Matsubara formalism and presented a condensed and clear overview and interpretation of the thermal decay rates. Discontinuities of Green’s functions, important for the decay rates have also been studied in detail by Kobes and Semenoff [15, 16]. Further studies of thermal Npoint function, important for higher order processes have been performed by e.g. Evans [17]
This review aims to give a detailed and comprehensive overview of basic concepts and implications of finitetemperature effects, and thereby providing an insight on the importance of implementing the TFT framework for a consistent and universal description of high to low temperature and density phenomena. In particular, we present an explicit calculation of typical thermal effects on observable decay rates for several generic processes found in Yukawatype field theories. In the following Sect. 2, an overview of the underlying theory is presented starting from the statistical approach introduced in QFT by Wagner [18]. This general approach is valid in as well as out of equilibrium. Then, the equilibrium propagator is presented, followed by an overview of the Matsubara formalism, Sect. 3, and the realtime formulation, Sect. 4. Having the realtime propagators and selfenergies established, the concept and definition of the thermal decay rate is presented in Sect. 6. In Sects. 7–10, thermal decay rates are presented in the realtime formalism for several processes. Here, we present such examples as a (pseudo)scalar particle decaying into two distinct (pseudo)scalars, Sect. 7, a (pseudo)scalar decaying into a fermionantifermion pair, Sects. 8–9, and finally in Sect. 10, a (pseudo)scalar emission off a fermion line is discussed. In Sect. 11, a short summary is given.
2 Elements of thermal quantum field theory
This section provides the theoretical formulation of TFT with the purpose of introducing the reader to the relevant methodology that will then further be used in explicit calculations of thermal decay rates. In order to obtain a diagrammatic formulation of TFT, the Green’s function techniques are deployed in terms of a thermodynamic extension of the Wick’s theorem. This technique is then used for analysis for twobody decay rates in the thermal medium that are related to the corresponding selfenergies.
2.1 Statistical treatment of initial states
The underlying principle of TFT will be outlined in this subsection. The discussion is mainly based on the broad and comprehensive article by Wagner [18] and the initial formulas are valid in equilibrium as well as out of equilibrium for arbitrary initial distributions. This general treatment precedes a discussion of equilibrium theories, e.g. the Matsubara formalism or the realtime formalism.
2.1.1 Operator expectation values
Experimentally measurable observables in QFT are usually expressed as expectation values of certain operators evaluated at any given time. An arbitrary measurement is defined by two characteristic properties that can be introduced as follows.
The first property is the preparation of the initial state which fully specifies the system at some initial time \(t_\text {in}\). It is reasonable to assume that no initial state can be determined exactly; rather, one should adopt the view that the initial state can be prepared up to a probability distribution \(\rho \) over pure states so that the initial preparation of any system results in a mixed quantum state. Mixed states are statistical ensembles of pure states where the ensemble specifies some lack of knowledge of the system e.g. due to noise, entanglement with larger systems etc. Using the language of statistical quantum mechanics, the distribution \(\rho \) assigns a weight \(\rho (n) \in [0, 1]\) to the pure states \(\left n\right\rangle \) such that the weight describes a fraction of the ensemble in each state. The weights are normalised according to \(\sum _n \rho (n) = 1\) and, in the Fock space spanned by \(\left n\right\rangle \), they provide a definition of the density matrix:
This expression describes a classical probability distribution over the pure states. Note that any state, with pure or mixed initial preparation, may be described by this formalism^{Footnote 1}. Using statistical mechanics, the operator expectation value (the observable) is given by
at the initial time \(t_\text {in}\) for an observable \(\mathcal {O}\). Hence, the initial preparation of a system is equivalent to the determination of \(\hat{\mathcal \rho }(t_\text {in})\).
With the initial state now dealt with, the second property to consider is the time evolution of the system. This process is specified by the Hamiltonian \(\hat{\mathcal {H}}(t)\), and, in the Heisenberg picture, the system evolves according to the Heisenberg equation of motion:
The states are timeindependent in this picture and specified fully at \(t_\text {in}\). A consequence of the above equation of motion is that the timedependent expectation value, the onepoint function, is given by
The subscript \(\mathcal {H}\) will be dropped from now on.
2.1.2 Expansion of the density operator
The initial density operator for an arbitrary experiment may be a multiparticle operator. The most general proof of Wick’s theorem was provided by Danielewicz [19]. This work implemented the necessary condition that the expectation value must be taken over noninteracting operators with respect to a oneparticle density operator in order for the theorem to hold exactly. However, Wagner [18] provided an appropriate expansion of correlation functions that allows the use of Wick’s theorem. This expansion is twofold and considers both an arbitrary (potentially multiparticle) initial density operator and the time evolution operator. Let us discuss such an expansion in more detail.
A generic density operator may always be expressed in an exponential form due to the physical requirements of hermiticity and positivity. This form is realised by the introduction of an operator \(\hat{\mathcal {B}}\) defined at the initial time \(t_\text {in}\). This is done in complete analogy to the formalism developed by Matsubara [6] so that
which is the starting point of a theory that describes thermal systems. Note that for the grand canonical ensemble \(\hat{\mathcal {B}} = \hat{\mathcal {H}}  \mu \hat{\mathcal {N}}\) and \(\lambda = \beta \), with \(\mu \) being the chemical potential, \(\hat{\mathcal {N}}\) – the particle number operator, and \(\beta = T^{1}\) – inverse temperature, the formalism of Matsubara is recovered. The exponential form of \(\hat{\rho }\) closely resembles the Boltzmann distribution which emerges in any system in thermal equilibrium.
One may further define the oneparticle density operator \(\hat{\rho }_0\) as follows
Here, the general oneparticle operator \(\hat{B}_0\) is extracted from \(\hat{\mathcal {B}}\) leaving the residual operator \(\hat{B}'\): \(\hat{B}' \equiv \hat{\mathcal {B}}  \hat{B}_0\). Since \(\hat{B}_0\) is an analogue to the free oneparticle Hamiltonian of the zerotemperature theory, a generalised interaction picture can be defined with respect to the timeindependent operator in the Schrödinger picture using \(\hat{B}_0\) so that
for some parameter \(\tau \). Comparing the translation operators (exponentials) on the righthand side of Eq. (2.7) to that of Eq. (2.6), one arrives at a connection between \(\tau \) and \(\lambda \) shown below. Making use of this generalised interaction picture to express the residual of \(\hat{\mathcal {B}}\) after the extraction of \(\hat{B}_0\), Wagner [18] defined an expansion of the multiparticle \(\hat{\rho }\) in terms of the oneparticle \(\hat{\rho }_0\). From Eq. (2.5), we have
Here, the parameter \(\tau \) is purely imaginary for real \(\lambda \) and it defines an imaginary contour of evolution (or integration, in what follows) \(C_\nu \) in the complex plane, see Fig. 1. The new operator \(\hat{S}_{C_\nu }\), a generalisation of the time evolution operator of the zerotemperature theory, was introduced above purely by trivial extraction and takes the form
This operator satisfies
and, hence, it can be formally integrated as
The exponential on the righthand side has been contourordered along the vertical contour segment that goes from 0 to \(i\lambda \) according to
The sign expressed by \(\eta = +1 \, (1)\) accounts for the case of commuting (anticommuting) operators. As mentioned above, \(\hat{B}'\) has been expressed in the generalised interaction picture with respect to \(\hat{B}_0\). Wagner [18] thereby provides an arbitrary expectation value at \(t_\text {in}\) as follows
This has the same form as Eq. (2.4) if one regards \(\big (Z_0/Z\big ) \hat{S}_{C_\nu } \hat{\mathcal {O}}(t_\text {in})\) as a noninteracting operator (i.e. expressed in the generalised interaction picture) to be averaged with respect to \(\hat{\rho }_0\). Notably, \(\hat{\rho }_0\) is a oneparticle density operator defined at the initial time \(t_\text {in}\). As a consequence, Wick’s theorem holds for each term in the expansion of \(\hat{S}_{C_\nu }\) following the criteria presented by Danielewicz [19]. The emerging contour of integration is the vertical line in Fig. 1. The formalism outlined above is valid for any system that is defined by a distribution in the exponential (thermal) form Eq. (2.5) at some initial point. Quite generally, the formalism has been shown [18] to hold for a wide family of systems since the multiparticle initial distribution may always, at least formally, be expressed in terms of quantities that obey the Wick’s theorem.
2.1.3 Realtime evolution operator
The generalised time evolution operator, formally defined by Eq. (2.11), transforms an operator into its average along the contour of Fig. 1. In this section, the definition of this operator will be extended in order to incorporate evolution along the realtime axis thereby allowing for physical time dependence. This development is necessary in order to work out the socalled realtime formalism in which realtime quantities may be extracted directly.
Wagner [18] and Danielewicz [19] made an observation that the time evolution operator must be expressed as a noninteracting operator in order for the Wick’s theorem to hold. However, the general timedependent Hamiltonian contains multiparticle interactions. This issue was resolved in the previous section in Eq. (2.13) for the vertical contour in Fig. 1 since this expression provides an expansion in which the Wick’s theorem holds for each term in \(\hat{S}_{C_\nu }\). In general, in order to compute observables one is interested in the resulting npoint correlation functions. The latter can be generalised in the TFT as follows
and then extended further to directly incorporate the realtime arguments as opposed to the purely imaginary temporal dependence along the \(C_\nu \) contour discussed in the previous section. Keldysh [9] developed an expansion of the time evolution operator that is valid on the real axis. As shown in Fig. 2, a contour segment \(C_1\) that goes up to some largest time \(t_\text {fi}\) on the real axis is added. A second segment \(C_2\) goes back to \(t_\text {in}\), again along the real axis, before the piece \(C_3\) goes down to \(t_\text {in}i\lambda \). The segments on top of the real axis go through all temporal arguments of the npoint function of interest. Note that the apparent offset from the real axis in the figure is purely for display purposes: both contour pieces \(C_1\) and \(C_2\) lie exactly on top of the axis.
The contour ordering \(T_C\) may be defined along the extended Keldysh contour. In complete analogy to the previous section, the notion of \(\hat{\mathcal {B}}\) may be extended by the introduction of
The new operator \(\hat{\mathcal {K}}(t)\) is defined as the realtime Hamiltonian of a given theory for realtime arguments and the generalised Hamiltonian discussed in the previous section on the vertical contour piece. The procedure may be followed through introducing the oneparticle \(\hat{K}_0\) and residual \(\hat{K}'\) operators that are defined over the entire contour, similarly to \(\hat{\mathcal {K}}\) (see the analogous definition of \(\hat{B}'\), \(\hat{B}_0\) following Eq. (2.6)).
The twopoint function may be written as
The subscripts of the brackets here indicate that the trace has to be taken with respect to the oneparticle density operator \(\hat{\rho }_0\) defined in terms of \(\hat{K}_0\). Besides, \(T_C\) orders the operators along the entire contour C and the time evolution operator
is expressed in the generalised interaction picture with respect to \(K_0\) analogously to Sect. 2.1.2. Hence, a formulation of an arbitrary system, valid also out of equilibrium, exists in terms of the series expansion of \(\hat{S}_C\). For such series, the thermodynamic version of Wick’s theorem holds [19]. Extracting the physical quantities from such an expansion is unfortunately anything but a straightforward procedure since it is clear that the series contains terms other than realtime correlation functions as well. Several authors have analysed the full expansion out of equilibrium, see for example [9, 18, 20,21,22,23]. In particular, Wagner [18] provides a systematic series expansion of the contourordered twopoint correlation function for fermion fields and sets up the framework in which one could attempt to find a solution to the generalised Dyson’s equation.
From this point on, this work will focus on approaches to thermal equilibrium theories, mainly developing their imaginary and realtime formulations, with the main goal of presenting the decay rates for processes involving neutral scalars and Dirac fermions as practically relevant example calculations in the TFT.
2.2 Field operators in thermal theory
As was elaborated above in Sect. 2.1.2, the statistical approach to TFT produces a complextime dependence through the formal equivalence between time and inverse temperature. The expectation values of operators that are needed for the evaluation of the corresponding observables are expressed above as traces over operators with a statistical weight implemented by the density matrix. This subsection provides relevant details on properties of the field operator and its modes in complete analogy to the zerotemperature theory.
2.2.1 KMS condition and ladder operators
The trace interpretation enforce a periodicity condition on the npoint functions of Eq. (2.14). Let us discuss this condition in more detail.
Consider, as an example, the simplest class of npoint functions – the statistical average with respect to the canonical density matrix, \(\hat{\rho } = \exp \,\left[ \beta \hat{H}\right] \), of N scalar field operators expressed in the Heisenberg picture. In the case of a oneparticle Hamiltonian, the average procedure results in
Using the cyclic property of the trace, it is straightforward to show that
It was noted already in 1932 by Bloch [5] that the sandwiched field operator that appears in the above calculation can formally be represented as a result of temporal evolution due to the Heisenberg equation of motion of Eq. (2.3),
The condition of Eq. (2.19) is the wellknown KuboMartinSchwinger (KMS) condition [7, 8] that holds for all thermal npoint functions.
Now, any field operator \(\hat{\phi }(x)\) of a free theory, as a function of the spacetime variable x, may be expanded in the basis of creation and annihilation (ladder) operators. For a bosonic (fermionic) field, these operators (anti)commute. In the case of a bosonic field operator, the commutation relations of the ladder operators may be expressed according to
for modes k, l and the commutator vanishes for any other combination of operators. Introducing the mode functions \(f_k(x)\), \(f_k^*(x)\), the free field can be expanded as
The mode functions of the free massive field are the solutions to the KleinGordon equation \((\partial ^2 + m^2)f_k(x) = 0\) which, for spinless bosons in a finite volume \(V=L^3\), read
with denoting the energy of the kth mode, and \(\mathbf{k} = 2\pi \mathbf{n} /L\) where is the unit 3vector along the particle momentum. As usual, the dynamics of the field operator above is governed by the free field Hamiltonian
with the conjugate momentum \(\pi (x) = \partial _0\hat{\phi }(x)\) and the freefield potential \(\mathcal {V} = \tfrac{1}{2}m^2\hat{\phi }(x)\).
In a theory described by the freefield Hamiltonian, the thermal average of any combination of ladder operators may be evaluated. In analogy to the Heisenberg picture, one may define the shifted operator as
where the second equality is extracted from the commutator . Making use of the KMS condition, one notices that
Applying the commutation relation of Eq. (2.21) results in
From this, one obtains
where \(n(\omega _k)\) is the thermal distribution function of BoseEinstein statistics. It is a straightforward exercise to show, in a similar fashion, that
Adding the case of anticommuting ladder operators, the thermal distribution generalises to
for commuting (\(\eta = +1\)) and anticommuniting (\(\eta = 1\)) operators. The latter guarantees that the fields satisfy the periodicity condition imposed by the trace interpretation.
2.2.2 Thermodynamic Wick’s theorem
The most general proof of the Wick’s theorem can be found in Ref. [19]. Following the basic set up introduced above, one may deploy the same strategy as used for deriving Eq. (2.28) and examine the general expression
It is a simple procedure of applying the commutation relation of Eq. (2.21) together with the KMS condition Eq. (2.26) to show that this expression vanishes if \(i \ne j\). If the number of creation and annihilation operators is equal, this expression allows for a simple proof of the thermodynamic version of the Wick’s theorem.
Indeed, applying the KMS condition once one gets
Then, moving the exponential factor to the lefthand side and commuting the creation operator \(\hat{a}_{k_1}^\dagger \) through the series of annihilation operators \(\hat{a}_{l_j}\), one finds
Here, the first term is the average of interest and it can be moved to the lefthand side where it combines to gives the thermal function. Collecting all terms proportional to the \(\delta \)functions results in
Moving the thermal factor to the righthand side, one identifies the BoseEinstein distribution such that Eq. (2.33) becomes
The rightmost factor in the sum is expanded in a similar fashion using . Then,
Hence, by induction, the full average \(\langle \hat{a}_{k_1}^\dagger \cdots \hat{a}_{k_i}^\dagger \hat{a}_{l_j} \cdots \hat{a}_{l_1} \rangle _0\) reduces to
for \(j > i\). Note, the rightmost factor in the nested sum must vanish since the average of a product of annihilation operators is zero. Similarly for \(j < i\),
Hence, it can be concluded that
So, any average over an equal number of creation and annihilation operators may be expanded as a sum over the product of every possible combination of twooperator averages. All other combinations of creation/annihilation operators have a vanishing thermal average. This is the essence of the thermodynamical Wick’s theorem.
2.2.3 Thermo field dynamics
In Sects. 2.2.1–2.2.2, an operator formalism for treating dynamics of the fundamental fields has been introduced. As seen already in Sect. 2.1.3, the physical operators of TFT can be defined on the realtime contour shown in Fig. 2. The theory gets simplified significantly if one considers a thermal system in equilibrium. The study of thermal operators acting on the states of the equilibrated Hilbert space is referred to as thermo fields dynamics. This approach was investigated first by Umezawa et al (see e.g. Refs. [10, 24, 25]) and the idea results in a doubling of the Hilbert space. Thermo field dynamics has been further developed by Fujimoto et al. [26] and incorporates, for example, a thorough structure of the thermal vacuum as well as provides a fundamental understanding of gauge theories in TFT [27].
The emergent property of the doubling of degrees of freedom is present also in the pathintegral formulation of the realtime formulation. This makes the evaluation of dynamical thermal quantities, e.g. the full thermal propagator, cumbersome in comparison to the case of the zerotemperature theory. However, both thermo field dynamics and its pathintegral version provide the means for evaluating the observables without considering the imaginary times, a property which aids the physical interpretation. We refer the interested reader to several books written on this topic, see for example [24, 27].
2.3 Thermal twopoint functions and propagators
Knowing the properties of the thermal trace from Sect. 2.2, the first nontrivial correlation, the twopoint function, may be discussed in some detail. Its explicit form will be obtained and a comparison to the corresponding quantity from the zerotemperature theory is made straightforward. Besides, the thermal propagator of the KleinGordon theory is described, to be further generalised to charged anticommuting multicomponent fields in later sections.
2.3.1 Thermal twopoint correlation functions
Owing to the discussion in previous sections, the tools have been outlined in order to calculate the twopoint correlation function of a free neutral scalar field which will be used as an example for thermal calculations later on. First, let us define the twopoint correlation functions ordered in the temporal arguments according to
Now, the first one can be computed by expansion of the field in terms of the ladder operators as
Only averages over an equal number of creation and annihilation operator will contribute to this expression. Hence,
Substituting the expression for the mode functions \(f_k\) from Eq. (2.23), we obtain
In the thermodynamic limit^{Footnote 2}, an integral replaces the sum [13] so that
In order to produce an integral in fourspace over k, the following identity may be employed
so that the correlation function becomes
Since \(\omega _k = \omega _{k}\) by definition of \(\omega _k\), the second integral could be recast by a change of variables according to \(\mathbf{k} \rightarrow  \mathbf{k} \). Hence, the exponential could be taken out for \(k = (k_0, \mathbf{k} )\). Now, by identifying
and by defining the free spectral density
the correlation function finally transforms to
Note that the free spectral density \(\rho _0(k)\) here should not be confused with the initial density matrix.
Similarly, the Fourier transform of \(C^< (x, x')\) may be found as
for which for following relation holds
The latter can be straightforwardly proven by utilising the KMS condition.
Let us now consider the average of the commutator
Making use of the relation between the two Fourier transforms in Eq. (2.51), one finds that
utilising the fact that \(\left[ 1 + n(k_0) \right] \left[ 1  e^{ k_0 \beta } \right] \equiv 1\). Such an average be used in analogy to the zerotemperature theory e.g. in order to define the thermal retarded and advanced propagators as follows
where \(\varTheta (x)\) is the standard Heaviside step function.
2.3.2 Thermal propagators
In analogy to the correlation function \(\langle \hat{\mathcal {O}}(t_1, t_2,\ldots , t_n)\rangle \) of Eq. (2.14), one may define the thermal Green’s functions as
that are the timeordered thermal averages of products of the field operators \(\big \{ \hat{\phi }(x_i) \big \}\) as prescribed by Eq. (2.16).
As an important nontrivial example, the twopoint thermal Green’s function for the free theory reads
and in order for \(G_0 (x, x')\) to be a Green’s function of the theory, it must obey the KleinGordon equation of motion
Using the definition of \(G_0 (x, x')\), one identifies the thermal propagator of the free field
which should itself be a Green’s function of the KleinGordon equation, i.e.
In order to demonstrate this explicitly, let the derivative act on the variable x as will be denoted by \(\partial _{(x)}^2\) while treat \(x'\) as a constant shift. Then,
Using the identity \({\hbox {d}}\varTheta (t)/{\hbox {d}}t = \delta (t)\) and rewriting the terms with secondorder derivatives as
and
we notice that the terms proportional to \(\delta (tt')\) disappear. Besides, one observes that
due to \(\tilde{D}^>(k) \propto \delta (k^2  m^2)\), and the same holds true for the term containing \((\partial _{(x)}^2 + m^2) D^<(x,x')\). Hence, the full expression is straightforwardly evaluated to
thus, completing the proof.
2.3.3 Spectral representation
A special form of the thermal propagator \(D(xx')\) is known as its spectral representation in terms of the spectral density defined above in Eq. (2.48). The propagator introduced in the previous section may be rewritten as an integral in momentum space as
Note that \(e^{k_0 \beta }[1 + n(k_0)] = n(k_0)\), recovering the spectral representation for a bosonic scalar field (see e.g. Ref. [28])
For practical applications in Feynman diagrams computation, it is instructive to turn into momentum space and to compare the Fouriertransform of the thermal propagator to its zerotemperature counterpart. To recover an explicit form of the Fourier transform of \(D(xx')\), one starts with Eq. (2.67) and writes
Using the following representation of the Heaviside function,
the integral in Eq. (2.68) may be rewritten as
where \(k_0' = k_0  s_0'\). This rather compact expression for the thermal propagator has a straightforward interpretation. The first term contains no reference to the thermal (medium) parameter \(\beta \) and resembles the propagator of the zerotemperature theory. The last term contains the thermal distribution function \(n(k_0)\) that characterises the medium in equilibrium through the temperature parameter \(T\equiv \beta ^{1}\) and for the BoseEinstein (FermiDirac) distribution governing the statistics of bosons (fermions). Note, this function vanishes when \(T\rightarrow 0\). The thermal propagator has therefore naturally been split into thermal and nonthermal terms.
2.4 Contour pathintegral formulation
From the outline of the TFT given above, together with some illuminating examples, it has become clear that in order to perform explicit calculations, one must specify the initial thermal density. Focusing on the case of density operators that describe the thermal systems in equilibrium, this subsection overviews the pathintegral formulation of such systems starting from the density distribution of the grand canonical ensemble. Then, the generating functional is discussed before the perturbative expansion of the thermal pathintegral formalism is considered. The general propagator of TFT is discussed and the KMS condition is then restated in the context of path integral formulation.
Oneparticle quantities will be assumed initially since it has been shown above that the thermal functions of multiparticle systems may be recast into a series expansion over oneparticle quantities and much of the theory from this point on is initially introduced for free particles. Interactions are thereafter introduced perturbatively. The material presented here is primarily based on an extensive discussion by Landsman and van Weert in Ref. [13].
2.4.1 Grand canonical ensemble
In thermal equilibrium, the Hamiltonian \(\hat{\mathcal {H}}\) is timeindependent, and a system of charged particles is characterised by the density operator of the grand canonical ensemble
Here, \(\hat{Q}_a\) are the conserved charges with \(a\in \{1, A\}\), and \(\varPhi \) is the thermodynamical potential related to the partition function through \(\varPhi = \log Z\). The charge operators \(\hat{Q}_a\) and the Lagrange multipliers \(\alpha _a\) may be related to the number density operator and the chemical potential, respectively, as
where V is the volume of the system and \(\mu _a\) corresponds to the chemical potential related to each type of charge a. As seen in the previous section, the form of \(\hat{\rho }\) determines the expectation value of any npoint function^{Footnote 3}.
2.4.2 Generating functional
Analogous to zerotemperature QFT and to the scalarfield theory example in Eq. (2.56), the npoint correlation functions (or thermal Green’s functions) of arbitrary (commuting or anticommuting) field operators can be defined as
An important detail brushed over in the example calculations above is the fact that the thermal Green’s functions depend explicitly on the choice of integration contour C. This is evident mainly in Eq. (2.17). The contour of integration may be chosen quite arbitrarily but it becomes restricted for diagrammatic formalisms that require the thermodynamic version of Wick’s theorem to hold.
The thermal Green’s functions can be generated by the functional
expressed in terms of the cnumber sources j(x) through functional differentiation as
The normalisation here is \(Z[0] = \exp [\varPhi (\beta , V)]\).
The generating functional of Eq. (2.74) contains all npoint functions \(G_C(x_1, \ldots , x_n)\). In analogy to the zerotemperature theory, all disconnected diagrams can be factorised out by considering only the connected Green’s functions \(G_C^{(n)}(x_1, \ldots , x_n)\) defined by
The connected Green’s functions satisfy the following the cluster property:
which may be verified by direct evaluation. That is, the connected pieces fall off to zero when the distance between the field points increases. The expansion of W[j]
is often referred to as the cumulative (or cumulant) expansion in statistical mechanics. The resulting series trivially generates the connected Green’s functions, i.e. the sum of all diagrams that are fully connected. As a consequence of the logarithmic relation between Z[j] and W[j], the contribution from vacuum bubble diagrams, Z[0], factorises and may be absorbed by the normalisation of the Green’s functions. An illustration of the orderbyorder cancellation of disconnected bubble diagrams can be found in Appendix A.
Timeordering procedure on the contour, \(T_C\), may be explicitly expressed by parametrising C according to \(t = z(\tau )\), with \(\tau \) being real and monotonically increasing along the contour. Through the definition of the contour step function
the twopoint function, taken as an example, reads
where the sign factor \(\eta = \pm 1\) for commuting/anticommuting (bosonic/fermionic) field operators. Weldon [14] showed that this expression is well behaved only if the imaginary component of the contour C does not increase with \(\tau \). Feynman, Matthews and Salam [29, 30] provided the first proof of this statement in the context of the pathintegral formulation.
It should be mentioned at this point that the terms scalar, boson and fermion will be used extensively throughout the following theoretical outline below, as well as commuting and anticommuting fields and operators. Some of those labels are used in a somewhat different context by various authors and hereby we would like to clarify on how such terms are used within this work.
The term ‘scalar’ intends to reference a scalar quantity both in Lorentz and in any internal space. Hence, a ‘scalar field’ associates a single value to each point in spacetime but it may be either a commuting or an anticommuting field (the latter being a Grassmann variable) in this review. A ‘boson’ refers to an operator that obeys canonical commutation relations. Hence, a ‘scalar boson’ is the specification of a scalar (i.e. not a vector) field that obeys BoseEinstein statistics. The use of the term ‘fermionic scalar’ in this review might induce some confusion for the reader; the label refers to a scalar field that anticommutes (which is not a vector in a given space). This distinction of scalars is introduced simply because it is an easier exercise and a common approach in the literature to present the initial theory in terms of either commuting or anticommuting scalar (neutral onecomponent) fields. The formalism is then later extended to include fields that carry Lorentz or spin components. Hence, proper care must be taken when constructing the Lagrangian so as to only include field types with the proper structure in Lorentz and spin space respecting the relevant symmetries of the theory. The term ‘fermion’ is applied along its most common usage to Dirac spinors that carry components in spin space.
2.4.3 Pathintegral formulation
The functional that generates the npoint functions was determined in the previous section as a thermal expectation value over operators (Eq. (2.74)). In the pathintegral formulation, the state vectors that span the Fock space introduced in Sect. 2.1 can be used as a basis of coherent states that are eigenstates of the annihilation component of the field operator. The discrete modes are then exchanged for the continuous threespace variable^{Footnote 4}, \(\mathbf{x} \). This coherent state basis may be chosen to express the field states \(\left \phi (\mathbf{x} ); 0\right\rangle \) at time \(t=0\) that are eigenstates of the field operator \(\hat{\phi }(x)\):
The theory of neutral bosonic field considered in this subsection provides a simple example with vanishing chemical potential. The coherent states generalised to the continuum picture can be used to express the functional integration measure and further to express the thermal trace in the generating functional as
Note that the bra and ket states here must be taken at equal times to uphold the trace interpretation.
Given the time evolution of the field operator in Eq. (2.81), the states absorb the exponential through
The action of the canonical density operator inside the trace of Eq. (2.82) can then analogously be interpreted as a complex shift in time, i.e.
This, so far, purely formal equivalence of the thermal density operator to the timeevolution operator was first noted by Bloch [5] already in 1932 and from this observation follows the introduction of the complex temporal contour discussed in Sect. 2.1. Note specifically that the eigenvalue of the field operator, \(\varphi \), remains in order for the trace interpretation to hold. The functional measure \([\mathcal {D}\varphi ]\) is such as it may only pick out the fields with this periodicity condition over \(i\beta \) so that \(\varphi (t_\text {in},\mathbf{x} ) = \varphi (t_\text {in}  i\beta ,\mathbf{x} )\). With the formal observation above, the shifted trace can be restated in terms of some arbitrary initial and final times \(t_\text {i}\), \(t_\text {f}\) with the aid of the FeynmanSalamMatthews (FSM) formula [29, 30],
if the pathintegral on the righthand side is taken over all cnumber fields that satisfy the boundary conditions
In fact, Eq. (2.85) remains valid for arbitrary initial and final times under the single restriction that the imaginary component of the integration contour C connecting \(t_\text {i}\) and \(t_\text {f}\) may not increase along the direction of the contour [13]. Hence, C must go downwards in the complex plane or extend in a parallel direction to the real axis. When specifying the theory to one with no derivative couplings, the normalisation \(\mathcal {N}'\) in Eq. (2.85) may absorb the Gaussian integration over the conjugate momentum so that \(\mathcal {N}' \rightarrow \mathcal {N}\). The action is then
and hence the generating functional becomes
in terms of the field \(\phi (x)\) and its source j(x). Here, \(t_\text {i} = t_\text {in}\) and \(t_\text {f} = t_\text {in}  i\beta \) are connected via the contour C.
Expressed above as a pathintegral in terms of fields rather than operators, the generating functional accounts for the time ordering on the contour. Further, the averaging procedure has been reinterpreted in the pathintegral formulation to be taken with respect to the action as a statistical weight. The illdefined^{Footnote 5} normalisation Z[0] cancels out in the thermal Green’s functions of Eq. (2.75). This quantity contains all vacuum bubbles and is briefly discussed in terms of diagrams in section Appendix A.
In order to apply the tools of perturbation theory, one first splits the Lagrangian into its free and interaction parts as \(\mathcal {L} = \mathcal {L}_0 + \mathcal {L}_\text {I}\), such that the prefactor Z[0] in Eq. (2.88) factorises into free, \(Z_0[0]\), and interaction, \(Z_\text {I}[0]\) parts. In order to obtain the Feynman rules and a diagrammatic series, the \(Z_\text {I}[0]\) then undergoes a perturbative expansion into a series over the interaction term i.e.
By observing that the expansion series can be obtained by functional differentiation w.r.t. the source j(x), the argument of \(\mathcal {S}_\text {I}\) may be replaced by the functional differential, and the exponentiated interaction term, no longer a functional of \(\phi \), can be taken out of the functional integral. The full Z[j] can thus be rewritten in analogy to that in the zerotemperature theory as
Note, however, that the series expansion is formally presented in full generality w.r.t. a given contour C and the individual terms in this expansion may only have a clear interpretation once a particular choice for the contour C is specified.
2.5 Thermal propagators
In this subsection, the propagator of a free neutral boson will be connected to the twopoint correlation function. The latter is of great importance for practical computations and it is found by the evaluation of expectation values in the form
while making use of the timeordering procedure on the contour, see Sect. 2.4.2. This section will further generalise the discussion of thermal propagators to include anticommuting charged multicomponent fields and we follow closely the notation and procedure provided by Landsman and van Weert [13].
2.5.1 Propagator of the free neutral scalar boson
In the special case of a free scalar particle with no derivative couplings^{Footnote 6}, here a neutral (\(\mu = 0\)) boson with the free KleinGordon Lagrangian
the free generating functional in Eq. (2.88) may be rewritten by means of a change of variables
as follows
The shift in \(\phi (x)\) is chosen carefully in order to complete the square of the free Lagrangian. The emerging thermal bosonic propagator \(D_C(xx')\) is defined in relation to the differential operator of the equation of motion and it satisfies
For a neutral scalar boson, \(K\!(i\partial ) \equiv (\partial ^2 + m^2)\) is the usual KleinGordon operator. The contour \(\delta \)function may be defined as with \(\tau \) parametrising the contour C (recall the definition \(t \equiv z(\tau )\)).
Therefore, the propagator is related to the free twopoint Green’s function as follows
Generalising the discussion above in Sect. 2.3.3, it can also be rewritten in the spectral representation,
where \(n(k_0)\) is the thermal distribution function defined in Eq. (2.32). This result can be found by a generalisation of the expression first derived by Mills in Ref. [31] for the nonrelativistic case and then by Dolan and Jackiw in Ref. [28] for ordinary time ordering. Here, the spectral density for the free neutral bosonic field reads
Note that this quantity is not related to the distribution found in Sec. 2.1 and will not appear from this point on other than in its explicit exponential form.
2.5.2 Generating functional for an arbitrary free field
Consider a general multicomponent covariant complex field (bosonic or fermionic) described by the operator [13]. Here, \(\alpha \) is the index of the Lorentz representation of the field, e.g. a spinor or vector index and i is an index of a representation of an internal symmetry or a field generation index, i.e. not related to spacetime transformations. Let the operator transform under some representation of the Lorentz group \(\mathcal {J}_{\alpha \beta }[\varLambda ]\). The field is considered to be charged under a given set of internal symmetries and the conserved charges are denoted as \(q_a^{ij}\) so that
The chemical potential for the fields charged under multiple symmetries is generally given by the summed quantity \(\mu = \sum _a \mu _a q_a\); see the grand canonical ensemble in Sect. 2.4.1 applied to the eigenstates of \(\hat{Q}_a\), such that
Generalising the plain KleinGordon case discussed above, it is reasonable to start with a free Lagrangian in the following quadratic form
Here, the conjugated or adjoint field is defined as^{Footnote 7}: . Besides, \(K_{\alpha \beta }^{ij}(i\partial , \mu )\) is the differential operator of the free field in the medium which generally depends on the chemical potential. The free thermal Green’s functions that arise from this Lagrangian can be obtained from the generating functional. In the pathintegral formulation, this functional may be written in terms of two source fields
where j(x) is the source of while \(\bar{\jmath }(x)\) is the source of , and the fields are fully contracted over all discrete indices, e.g. . The \(\mu \)dependence has been shifted away from K to the source terms by means of a change of variables introduced by Weldon [32], under which the fields and the differential operator are transformed as
thus treating the field and its adjoint counterpart as independent variables.
2.5.3 Thermal propagator and KMS condition: a generic treatment
The functional integral of Eq. (2.102) is defined in order to generate the thermal Green’s functions (npoint functions) under functional differentiation and therefore it must represent the thermal trace of Eq. (2.4):
In order to recover the trace interpretation of the generating functional, the functional measure should be taken only over cnumber fields , such that the following periodicity condition is satisfied over a period \(i\beta \) such that^{Footnote 8}
The periodicity leads to the KuboMartinSchwinger condition (KMS) on the propagator which was introduced by Kubo [7], implemented by Martin and Schwinger [8] and is presented in what follows.
The free generating functional of Eq. (2.102) can be rewritten in terms of the general free thermal propagator by a shift of the field and its adjoint analogously to the case of the scalar field in Sect. 2.5.1. Contracted over all indices, the result is
with
In order to complete the square and extract the propagator \(D_{\!C\,\alpha \beta }^{ij} \equiv \big (K^{1}\big )_{\alpha \beta }^{ij}\), the thermal propagator must satisfy the differential equation
The generating functional must be invariant under the introduced shifts of the fields. This condition fixes the solution of the differential equation so that the propagator can be related to the twopoint function as
This is a special case of the general relation Eq. (2.16) with the final expectation value expressed in the pathintegral formalism over the fields rather than the operators, analogously to Eq. (2.88). Guided by the definition of the time ordering along the contour \(T_C\), the free propagator may be split using the contour stepfunction of Eq. (2.79) so that
Let us compare this expression to Eq. (2.80) for the general npoint function. The imposed boundary condition on the field of Eq. (2.105) enforces a boundary condition on the propagator that relates its advanced and retarded components. As a consequence, invariance of the pathintegral over the time shift by \(i\beta \) holds. This way, we arrive at the KMS condition in the following generic form,
which is a proper generalisation of the condition Eq. (2.19) previously introduced in the case of a neutral scalar field. This condition is important for thermal theories as relates several thermal quantities in the realtime formalism (see Sect. 4).
Note that any relativistic, multicomponent field should satisfy the KleinGordon equation. Therefore, assuming a multimass KleinGordon divisor \(d_{\alpha \beta }^{ij}(i\partial )\) to exist according to Ref. [33] and further references therein, we have
The \(m_l\)’s represent the mass spectrum and can be inferred from the structure of K [33, 34]. For an extended and comprehensive discussion regarding the mass spectrum, see the lecture notes by Wightman [34].
The solution to Eq. (2.108) simply becomes
in terms of the scalar propagator encountered earlier. A slight reservation should be made regarding the form of \(D_C(xx')\). The solution presented in Eq. (2.97) of Sect. 2.5.1 is that of a neutral scalar boson. When incorporating anticommuting as well as charged fields (\(\mu \ne 0\)) this propagator is modified slightly to become
with the distribution function
The ± corresponds to charged particles/antiparticles through the definition \(\omega _\pm = \beta (k_0 \mp \mu \)). Generally, the spectral density of a free field can be found as
Here, the discontinuity introduced by Ref. [33] and further discussed in Ref. [13] is defined over the real axis as \(\text {Disc}\,f(k_0) = f(k_0 + i\epsilon )  f(k_0  i\epsilon )\) in the limit \(\epsilon \rightarrow 0^+\).
Note, the results of this section rely on the fact that the contour stepfunction commutes with the KleinGordon divisor. Further, the charge operators are assumed to commute with \(\mathcal {L}_0\) so that the matrices \(q_a\) commute with both \(K(i\partial )\) and \(d(i\partial )\) [13].
Let us now summarise the most important points from the above discussion as follows:

Time integration is to be taken along a contour C that begins at an arbitrary initial time \(t_\text {in}\) and goes down to the final time \(t_\text {in}  i \beta \) with the restriction that the imaginary component of the contour can not increase^{Footnote 9}.

The propagator \(D_C(x  x')\) depends explicitly on the choice of contour.
These points are valid for all thermal propagators as a consequence of the very general expression of Eq. (2.113). Since the quantities used in practical calculations depend explicitly on the choice of the contour C, it is imperative to choose a formalism where the physical quantities defined at real times can straightforwardly be extracted and in such a way that the final result does not depend on this choice of C. Two commonly used formalisms that provide reliable methods to extract such quantities will be presented in the following.
3 Imaginarytime formalism
The thermal formulation of QFT presented in the sections above formally resembles to a high degree the wellknown QFT at zero temperature. The main distinguishing property is that the explicit form of the thermal npoint function (Green’s function) depends on the choice of integration contour C in the complex temporal plane. This contour connects some arbitrary initial time \(t_\text {in}\) with the final time \(t_\text {in}  i\beta \). The latter time point emerges as a consequence of the formal interpretation of the thermal equilibrium distribution operator as an evolution operator. In the equilibrium case, the contour that connects the initial and final time points can be arbitrarily chosen with the single restriction that the imaginary component of the contour must not increase when integrating along the contour. In this section, a specific choice of contour will be considered in order to make explicit calculations possible. This discussion will be followed by a diagrammatic expansion of the generating functional in order to derive the Feynman rules on this contour.
3.1 Matsubara contour
The simplest possible choice of the integration contour has been proposed by Matsubara in Ref. [6]. It constitutes a straight vertical line that connects \(t_\text {in}\) and \(t_\text {in}  i\beta \), cf. Fig. 1 with \(\lambda = \beta \). The time variable may then be parametrised on a simple and purely imaginary form as \(t = i\tau \) with \(\tau \in [0, \beta ]\) being a real variable. This particular choice has the advantage that it generates a perturbative expansion that contains the diagrams recognised from the corresponding zerotemperature theory (vacuum bubbles, connected diagrams, 1PI, etc.) [27]. This section will mainly be concerned with a single scalar field with \(\mu = 0\) as an illuminating example, but the results may be generalised to a theory with charged fields in a nontrivial representation of both Lorentz and internal symmetries, see Ref. [13, 27].
Through a suitable parametrisation of time, the action may be written as an integral in Euclidean space:
where the Euclidean Lagrangian reads
The npoint Green’s functions may be obtained by functional differentiation w.r.t. a source \(j(\tau , \mathbf{x} )\) of the generating functional
Since the complex shift of the temporal variable is always present in theories with an equilibrated medium, TFT is in a sense intrinsically Euclidean. Let us discuss the basic ingredients of such a Euclidean formulation of Matsubara.
3.2 Imaginarytime propagator
As stated in Eq. (2.94), the free generating functional \(Z_0[j]\) (with \(\mathcal {V}(x) = 0\)) may be written in terms of the free propagator by completion of the square. In the Matsubara formalism, the result takes the following form
The inverse of the differential operator must satisfy the boundary condition of Eq. (2.95) in order to fix a proper solution of the differential equation. The solution is the thermal propagator of Matsubara \(K_\text {E}^{1} = \varDelta (\tau \tau ', \mathbf{x}  \mathbf{x} ')\) which is given by Eq. (2.114) over the chosen contour^{Footnote 10}. The propagator is periodic in \(\tau \) over a period \(\beta \) as imposed by the KMS condition (Eq. (2.111)), which can be straightforwardly verified.
Completion of the square of the free Lagrangian renders the generating functional in the form
Comparing with Eq. (2.94), the Euclidean propagator of a neutral scalar may be found as
Note the purely imaginary temporal coordinate of the Euclidean propagator here. Thus, \(Z_0[j]\) shown above generates all the Green’s functions with imaginary time arguments.
The above discussion is analogous to the zerotemperature theory, with the following two differences:

the temporal integration is reduced to the periodic interval \([0, \beta ]\):
\(i\int {{\hbox {d}}t} \rightarrow \int _0^\beta {{\hbox {d}}\tau }\);

the appropriate propagator of a free scalar field is no longer the Feynman propagator but the thermal propagator of Matsubara:
\(D_\text {F}(xx') \rightarrow \varDelta (\tau \tau ', \mathbf{x} \mathbf{x} ')\).
Due to the periodicity condition in \(\tau \) applied to the bosonic fields (antiperiodicity for fermionic fields), and therefore on the thermal propagator, over \(\beta \), the Matsubara propagator may be written in Fourier space as a sum over discrete frequencies \(\omega _n\). Transformation of Eq. (2.97) using the Matsubara contour leads to
with \(\omega _n = 2n\pi /\beta \) (bosonic), \(\omega _n = (2n+1)\pi /\beta \) (fermionic), and . Note that the mode energy here reads , meaning that \(\mathbf{k} \) denotes an argument of the function rather than an index to be summed over. The \(\omega _n\)’s are the Matsubara frequencies [6, 13, 27, 35] and they parametrise an infinite number of poles of the momentumspace propagator located on the imaginary axis provided that the Fourier transform is
A more general multimass version of Matsubara propagator including charged fields was presented by Ref. [13]. In order to obtain an expression analogous to the zerotemperature theory, define \(k_0 = i\omega _n\) in Eq. (3.7). Then
where \(k^2=k_0^2  \mathbf{k} ^2\), with the zeroth vector component, the energy \(k_0\), being purely imaginary as indicated above.
3.3 Imaginarytime Feynman rules
In the pathintegral formulation, the generating functional may be expanded to yield the Feynman rules of the imaginarytime formalism through a perturbative series. Following the reasoning of Sec. 2.5.1, the Euclidean action may be split into a free part that is quadratic in the field and an interaction part so that \(S_\text {E} = S_0 + S_\text {I}\). The generating functional of Eq. (2.88) may then be expanded as
Each term in this series may be reinterpreted as a statistical average with respect to the weight \(\exp [S_0]\) so that
The Feynman rules are directly extracted from this series. For the specific case of \(\phi ^l\) (\(l=3,4,\dots \)) interacting theory with a coupling constant \(\kappa \), the rules are given as follows [13, 36]:

Draw diagrams using Wick contractions and determine symmetry factors.

Define \(k_0 = i\omega _n\) and assign a propagator \(\tilde{\varDelta }(k)\) to each line and a factor of \(\kappa \) to each vertex i.

Impose energymomentum conservation through \(\beta (2\pi )^3 \, \delta _{n0} \delta ^{(3)}\big ( \textstyle \sum _i \mathbf{k} _i \big )\) with \(n = \sum _i n_i\). A global conservation factor \(\beta (2\pi )^3\delta _{00}\delta ^{(3)}(0)\) may be separated out corresponding to the exclusion of one vertex.

Sum and integrate over all internal energies and momenta \(k_i\): \(\tfrac{1}{\beta }\sum _n\int \! \frac{{\hbox {d}}^3 \mathbf{k} _i}{(2\pi )^3}\).
Again, one should note that the diagrammatic structure is identical to that of the zerotemperature theory. Further, the definition of the cumulant in Eq. (2.78) allows for the extraction of all connected diagrams with at least one external leg so that
3.4 Matsubara frequency summation
This subsection contains a short discussion on practical calculations in Matsubara theory. Every term in the perturbation theory series of \(\log Z[j]\) may be expanded as a product of Matsubara propagators due to the thermodynamic Wick’s theorem. Such propagator products must generally be summed up over Matsubara frequencies. An example of Matusbara summation from \(\phi ^3\)theory is the propagator product of the scalar loop diagram with one propagator for each internal line in the loop,
with \(\omega _{mn} \equiv \omega _{m}  \omega _n\). The summation corresponds to the integration over time in the zerotemperature theory and may be arbitrarily complicated. A general scheme should therefore be provided in order to perform the summation over any number of propagators in the product.
Generically, summation over Matsubara frequencies \(\omega _n\) comes in the following form
with the function \(g(i\omega _n)\) being a product of arbitrarily many Matsubara propagators, and \(\eta \) indicates bosonic or fermionic frequencies i.e.
In the case of a single propagator \(\tilde{\varDelta }(i\omega , \mathbf{k} )\), the function g reads
Note, \(S_\eta \) converges if \(g(z{=}i\omega _n)\) approaches 0 when faster that \(z^{1}\).
In order to evaluate \(S_\eta \), one may deploy calculus of residues in a procedure described by, for instance, Refs. [36, 37]. The Matsubara sum Eq. (3.14) may be treated as the sum of residues of simple poles at \(i\omega _n\) and, thus, may be turned into a closed integral. A suitable weighting function \(h_\eta (z)\), different for the bosonic and fermionic cases, that has simple poles at every instance of \(i\omega _n\) should be introduced to accomplish this. Then,
The poles of \(h_\eta (z)\) are illustrated in Fig. 3. A number of crosses on the imaginary axis in the figure indicate the poles of the appropriately constructed \(h_\eta (z)\) at \(i\omega _n\). The contour picks up the residues of all these poles giving rise to \(S_\eta \).
To perform the Matsubara summation, the contour lines are deformed to enclose the poles of g(z), see Fig. 4. The sum \(S_\eta \) is then the sum of the residues of \(g(z)h_\eta (z)\) over all poles of g(z):
The leading negative sign is due to the clockwise orientation of the contour.
3.4.1 Choice of \(h_\eta (z)\)
The choice of a suitable Matsubara weighting function \(h_\eta (z)\) is a somewhat delicate matter. In order to guarantee simple poles at \(z = i \omega _n\), for example, for bosonic frequencies \(\omega _n = 2 \pi n/\beta \), any of the following weighting functions may be utilised:
Note, \(h_+^{(1)}(z)\) may be used to control convergence in the halfplane with , while \(h_+^{(2)}(z)\) controls convergence in the right halfplane where .
Adding the two functions to provide convergence in the entire complex plane yields
and this relation will (by means of the contour deformation) further reduce down to
3.4.2 Example: tadpole diagram
In the case of the tadpole diagram in \(\phi ^4\)theory
This function clearly has simple poles at \(z = s \omega _\mathbf{k }\) and the two residues (one for each term in the sum) are due to the structure of the Laurent series of g(z). Hence,
Employing the following identities,
the above equation simplifies to
3.4.3 Example: eye diagram
In the case of the eyediagram of \(\phi ^3\)theory discussed further down in the context of thermal decay rates, the sum \(S_\eta \) appears to be somewhat more complicated. In this case,
The poles of g(z) are simply the four poles \(z_0 = s\omega _\mathbf{q }\) and \(z_0 = i\omega _n + s'\omega _\mathbf{k  \mathbf{q} }\). Hence, accounting for the residues over these poles, the Matsubara frequency sum takes the form
Noticing that
and taking out signs of the \(\coth \)functions in order to cancel the sign in front of the sum, we arrive at
Then, expanding the sum over s, \(s'\) and using Eq. (3.25), one gets the final result for the Matsubara summation:
that can be exploited in practical calculations.
4 The realtime formalism
Matsubara found that, by the procedure of analytic continuation of the Euclidean Green’s functions, the retarded correlation functions with real timearguments may be obtained in the imaginarytime formalism presented above. However, the evaluation of threemomentum integrals over Matsubara propagators summed over the frequencies is by no means straightforward for any but the simplest cases. By evaluating the Green’s functions with respect to a contour that contains the real axis, in the socalled realtime formalism, an analytic continuation is avoided completely. Such a realtime procedure is originally due to Schwinger [38] and Keldysh [9]. The formalism makes use of a special contour of temporal integration, the realtime contour presented in Fig. 2, which has the effect of doubling the degrees of freedom. This property, in particular, results in a \(2{\times } 2\)matrix structure of the propagator for a given field to be discussed below.
Other contours have been investigated as well. Particularly, one could mention the suggestion by Evans [39] to use an asymmetric contour.
4.1 Keldysh contour
The realtime contour in Fig. 2 is a special case of a family of realtime Keldyshesque contours [10, 25] parametrised by \(\sigma \in [0,\beta ]\) and presented in Fig. 5. The Keldysh contour (or sometimes KadanoffBaymKeldysh contour, see e.g. Ref. [40]) is recovered for \(\sigma = 0\). An even more general family of contours was presented in Ref. [25] with pieces going back and forth N times between and in parallel to the real axis. However, it can be shown that such additional pieces cancel out for \(N\ge 2\) and the fundamental reasons for discarding this extended class of contours are laid out in Ref. [25]. Hence, the contour presented in Fig. 5 is the most general realtime contour needed to include all npoint functions with real arguments, with \(\sigma \) being a freedom of choice. Commonly, this parameter is set to 0, \(\beta \) or \(\beta /2\) [12, 13, 21, 41].
It was argued previously, using Eqs. (2.67) and (2.113), that the contour propagator depends explicitly on the choice of contour C. It is clear from these equations that the contour dependence of the propagator enters only through the contour stepfunction \(\varTheta _C(tt')\). In the case of the realtime contour shown in Fig. 5, the time coordinates of x, \(x'\) may be distributed arbitrarily over C and several unique twopoint functions (propagators) arise. Let us label them as \(t_r\), \(t_s'\) so that \(t_r \in C_r\), \(t_s' \in C_s\) for \(r,s = \{ 1, 2, 3, 4 \}\). Then, the different propagators may be expressed as
Note e.g. that \(t_2, t_3\) always are later times than \(t_1, t_4\).
The appearance of several distinct propagators is a very general consequence of the statistical formulation of the twopoint function in Eq. (2.16). The realtime contour of Fig. 2 is treated in great detail by Wagner [18]. In an approach valid both in as well as out of equilibrium, Wagner organised the twopoint functions (Green’s functions) in a matrix. In the special case of \(\sigma = 0\), this matrix takes the following form
Adding the piece \(C_4\) (\(\sigma \ne 0\)) is a trivial extension. For any system in equilibrium, Landsman and van Weert [13], Wagner [18] and Das [27] argued that the contour pieces \(C_3\), \(C_4\) decouple entirely from the parallel pieces due to
in the limit \(t_\text {in} \rightarrow \infty \) and \(t_\text {fi} \rightarrow +\infty \). This may be proven by the application of the RiemannLebesgue lemma [42] if the source field is constrained to
This condition is compatible with the KMS condition [13]. Due to the decoupling of the vertical contour segments, the generating functional factorises as
with
Here, \(C_{rs} = C_r \cup C_s\). Therefore, the main focus, when considering the realtime Green’s functions, is the upperleft corner of the matrix in Eq. (4.2) while the contribution from the vertical pieces is treated as a multiplicative factor. This factor only enters the connected Green’s functions as an additive term in the cumulant expansion of Eq. (2.76).
4.2 Realtime propagator
An explicit form of the realtime thermal propagator, in the case of a neutral scalar particle, can be found by examining Eq. (4.6) in the light of Eq. (4.5). Having factorised out the vacuum bubbles Z[0] and the vertical contour pieces \(Z_{34}[j]\), only the realtime part \(Z_{12}[j]\) will be considered from here on. The two exponentials in \(Z_{12}[j]\) can be further factorised with respect to \(C_1\cup C_2\) by conveniently organising the propagator components in a matrix. From now on, the spatial variables will be suppressed. At the same time, a new notation will be introduced. The contour pieces \(C_1\), \(C_2\) in Fig. 5 are relabelled as \(C_+\), \(C_\), respectively, to indicate chronological and antichronological time evolution on the different parts of the contour.
The factorisation of the first exponential becomes
The relative minus sign is a result of the antichronological evolution of the fields on \(C_\). The two functions here \(j_+(t)\), \(j_(t)\) are introduced as sources of two separate field components \(\phi _+\), \(\phi _\) that exist only on \(C_+\), \(C_\), respectively. Together, the components form the full realtime field . The field component \(\phi _+\) evolves chronologically and its integration limits are recognised from the zerotemperature field theory while the component \(\phi _\) evolves antichronologically. This latter field component may not appear on external lines of diagrams generated by the above exponential since physical correlation functions, with realtime arguments and chronological dynamics, are generated by differentiation w.r.t. the source \(j_+\) rather than \(j_\) (cf. Eq. (2.75)). Nevertheless, its presence in the theory is an unavoidable consequence of the Keldysh contour, and contributions from virtual \(\phi _\)fields in loops must be taken into account. Such contributions are introduced by the second term \(\mathcal {L}_\text {I}[\delta /i\delta j_]\). Summing over \(r,s = \pm \), the second exponential factor can be rewritten as
The matrix components of the propagator must fulfil
The rightmost side of the second line reflects the negative orientation of \(C_2\) and can be shown explicitly from, for example, Eq. (4.17). These components may be used to express the general propagator of Eq. (2.113) for any bosonic or fermionic field of arbitrary spin and any charge. The explicit solution of Eq. (2.113) for each of the above components gives, after a Fourier transform of Eq. (2.67),
Here, the internal indices i, j have been suppressed, and
is the Feynman propagator of the zerotemperature theory. Recall that the spectral density \(\rho _0\) is the discontinuity over the real axis of this propagator (Eq. (2.98)) and may therefore also be written in terms of \(i\tilde{\varDelta }_F\), \(i\tilde{\varDelta }_F^*\) as
Hence, the propagator matrix may be diagonalised in a basis of zerotemperature functions by means of a Bogolyubov transformation. The result is
with the thermal (Bogolyubov) matrix defined as follows
Here the thermal angle \(\theta _k\) was introduced^{Footnote 11} through the functions
for fermionic[bosonic] fields. Here, the thermal function reads \(N(\omega ) = \varTheta (k_0)n(\omega _+) + \varTheta (k_0)n(\omega _+)\). The squareparenthesis notation conveys the point that for fermions the goniometric functions are considered while the hyperbolic functions apply to the scalar case. Note that the propagator is symmetric under simultaneous transposition and reversal of momentum, i.e. \(i\tilde{D}^{rs}(k) = i\tilde{D}^{sr}(k)\), for neutral bosons^{Footnote 12}.
In the limit of \(T\rightarrow 0\), the Bogolyubov matrix becomes the unit matrix. In such a case, the field components completely decouple such that \(Z_{+} \rightarrow Z_+Z_\) and the contribution from \(\phi _\) may be fully absorbed into the normalisation constant. The diagonalisation of the propagator is particularly useful since any thermal dependence may be absorbed into vertices giving rise to a basis where the propagator itself is defined in terms of zerotemperature functions. Hence, the realtime formalism and the propagator are intrinsically connected to the imaginarytime formalism since they meet when the formalism of Matsubara is analytically continued to real timearguments. This statement is formulated as follows
where \(\varDelta \) is the analytic continuation of the Matsubara propagator of Eq. (3.7) down to the real axis.
4.2.1 Realtime scalar propagator(s)
The thermal decays of interest here involve interactions between fermions and scalar bosons. In this subsection and the following one, the realtime free propagators for such fields will be explicitly presented for further references.
For the choice of \(\sigma = 0\), the components of Eq. (4.10) may be written as
Here, one recognises the retarded and advanced propagators
known from the zerotemperature theory. For practical calculations, it is common to rewrite the four components in terms of the Feynman propagator (and its conjugate), consequently rewriting also the thermal terms. Through the relation
and by insertion of the explicit spectral density Eq. (2.98), the components can be found as
Here, the new thermal distributions introduced for compact notation read
Note especially that, in the case of a neutral boson, one might define
and, for further convenience (see Sects. 7–10), in the case of charged fermions we have
Here, the lower sign reflects the opposite charge of antiparticles.
4.2.2 Realtime spin\(\tfrac{1}{2}\) propagator(s)
Considering spin\(\tfrac{1}{2}\) fields, the KleinGordon divisor carry spin structure, and for fermions (upper sign)/antifermions (lower sign) it reads
Recall that \(\eta = 1\) for FermiDirac statistics. The propagator components may then be found from Eq. (4.10) as
In the simple case of neutral particles, with \(\mu = 0\), these components reduce to those of Das [27].
4.3 Realtime Feynman rules
It was seen in the previous section that the Keldysh contour in Fig. 2 necessarily gives rise to a doubling of the degrees of freedom in the realtime thermal theory. This is achieved by separating the field into two components, each appearing on the respective segment of the realtime contour. One component is physical while the other should be regarded as a thermal ghost arising from the choice of the specific contour. For notational convenience, a neutral scalar field \(\phi \) will be considered in the derivation of the Feynman rules below. For illustration, the field is assumed to have an interaction term proportional to \(\kappa \phi ^l\). The generality of the method, however, allows for the treatment of the multicomponent vector field introduced above. The derivation of the Feynman rules for the case of is analogous to the case of a neutral scalar theory, but with the presence of contraction of Lorentz and internal indices in addition to the summation over the thermal propagator components.
It was seen in Sect. 4.2 that, for a field with no derivative couplings, the relevant factor in the generating functional, \(Z_{12}[j]\), can be written as
The series expansion of this function generates all the diagrams of the theory in analogy to the zerotemperature case. Two distinct vertices appear due to the two interaction terms in the leftmost exponential: one interaction vertex involves only the physical field component and one vertex involves only the ghost field. See Fig. 6 for the vertices of the \(\phi ^4\)theory as an instructive example. Hence, the field components do not mix in the vertices. However, due to nonzero offdiagonal components of the propagator on the Keldysh contour, the fields may propagate into each other.
The connected Green’s functions of Eq. (2.76) are generated by functional differentiation according to
It is clear that, for any value of \(\sigma \ne 0\), the realtime Green’s functions may only be recovered by functional differentiation with respect to the source \(j_+\) since the second contour segment includes no real times. It may be proven [13] that the realtime Green’s functions are independent of the parameter \(\sigma \) and, hence, they are given by
The thermal ghost field \(\phi _\) may only propagate in internal lines that connect the vertices. These lines are generated by functional differentiation with respect to \(j_\) inside \(Z[j_+, j_]\), see Eq. (4.7).
The full set of Feynman rules can easily be extracted through the generating functional in its pathintegral form if the Lagrangian is split into its free and interaction parts. Then, in terms of the action, the generating functional may be written as
Summation over \(r,s = \pm \) is assumed. Expanding the second exponential, each term may be interpreted as an expectation value in the pathintegral formalism with respect to a weight \(e^{iS_0}\) so that
By means of the cumulant expansion, it is possible to factor out not only the free \(Z_0[0,0]\) but all vacuum bubbles Z[0, 0] so that the cumulant becomes
The expansion of the final term gives rise to all connected graphs with at least one external leg of the physical field \(\phi _+\). The realtime Feynman rules are extracted from this series as follows:

Draw diagrams using \(\phi _+\), \(\phi _\)vertices: n external \(\phi _+\)lines and arbitrarily many internal \(\phi _+\) and \(\phi _\)lines. Determine symmetry factors.

Connect vertices by assigning a propagator:

Assign a factor of \(i\kappa \) to each \(\phi _+\)vertex and \(i\kappa \) to each \(\phi _\)vertex.

Impose energymomentum conservation at each vertex through \((2\pi )^4 \, \delta ^{(4)}\Big ( \textstyle \sum _i k_i \Big )\). A global conservation factor may be separated out as \((2\pi )^4 \,\delta ^{(4)}(0)\).

Integrate over each internal momentum \(k_i\): \(\int \! \frac{{\hbox {d}}^4 k}{(2\pi )^4}\) and sum over all internal distributions of r, s.
Comparing the realtime formalism to the Matsubara theory, the propagator has gained a matrix structure and, further, two separate types of vertices have appeared.
5 Thermal selfenergies
This section discusses the expression of the thermal decay rate in terms of the selfenergy. The topic has been treated by e.g. Weldon [14], Ho and Scherrer [35] and discussions on the thermal selfenergy has also been advanced by [13, 15, 16, 26, 27, 41, 43, 44]. Weldon [14] related the selfenergy of the Matsubara formalism to a quantity interpreted as the thermal decay rate. In the sections below, we will examine the selfenergy of Matsubara, its analytic continuation and finally the connection of realtime quantities to it. This connection has been discussed by several authors, see for example Refs. [13, 26, 41].
5.1 Matsubara selfenergies
The connected twopoint function of the Matsubara formalism is obtained by functional differentiation of the cumulant in Eq. (3.12). In order to obtain a perturbative series, and hence the Feynman rules, in momentum space, the full generating functional of Eq. (3.11) may be Fourier transformed. It may be further manipulated in order to recover a form similar to that of Eq. (2.90). The full propagator appearing in Feynman diagrams is introduced as
staring from its zerotemperature counterpart. Since global momentum conservation is imposed for all diagrams, an overall factor of \(\beta (2\pi )^3\delta _{n0}\delta \big ( \! \sum \mathbf{k} _i \big )\) may be extracted, leaving the interacting manybody propagator labelled \(\tilde{\mathcal {G}}(k)\) by Landsman and van Weert [13]. Note here that the propagator carries the discrete energies in terms of the Matsubara frequencies. Realtime quantities must be obtained through analytic continuation. Analogous to Eq. (3.8), this propagator may be defined in terms of the full Matsubara propagator that has been extended away from the discrete frequencies by means of analytic continuation: \(\tilde{\varDelta }(i\omega _n, \mathbf{k} ) \rightarrow \tilde{\varDelta }'(z, \mathbf{k} )\). Hence,
For the full propagator, the free spectral density \(\rho _0\) has been replaced by the corresponding full quantity defined as \(i\rho (k) = \text {Disc}\,\tilde{\varDelta }'(k)\). The procedure of analytic continuation allows the propagator to be defined for real energies. This continuation is not unique and that is usually resolved by letting and by taking \(\tilde{\varDelta }'(z, \mathbf{k} )\) to be analytic away from the real axis [13, 28] which provides the above expression. Thus, we have uniquely
provided the property \(k_0\rho (k) \ge 0\). This function can be shown to have neither zeroes nor poles off the real axis provided that this inequality property holds true [13]. Given that the extended propagator is analytic off the real axis, its analytic inverse exists and fulfils a Dysonlike equation
which defines the analytic selfenergy. Note the free analytic propagator on the righthand side.
Guided by the above consideration, it is useful to define the thermal Feynman propagator as
This propagator may be inverted by writing so that the thermal selfenergy for the imaginarytime formalism can be extracted:
As in the zerotemperature theory, one may observe that the real part of the selfenergy may be absorbed as a correction to the mass while its imaginary component will be interpreted as a decay rate [14].
5.2 Realtime selfenergies
The full realtime propagator may be assumed to satisfy the SchwingerDyson equation (see Ref. [13] and references therein) similar to the zerotemperature case:
Like in the zerotemperature theory, the realtime selfenergy is most often^{Footnote 13} the sum of all oneparticle irreducible (1PI) insertions on the propagator line as visualised in Fig. 7. This selfenergy coincides with the selfenergy of the manybody propagator provided by Ref. [13] in connection to their discussion on the Matsubara theory. The full realtime components are not independent as a consequence of the KMS condition and due to translational invariance [13] and they satisfy similar relations as the components of Eq. (4.10).
5.3 Selfenergy relations
Viewing the freefield propagator of Eq. (4.10) as a special case of the full propagator of Eq. (5.7), the matrix of Eq. (4.14) also diagonalises the full propagator for some function \(\tilde{\mathcal {D}}_{\text {F}\alpha \beta }(k)\) so that
The new function is assumed to satisfy the SchwingerDyson equation that defines the selfenergy \(\bar{\varPi }_\text {F}\): \( \tilde{\mathcal {D}}_{\text {F}\alpha \beta }(k) = \tilde{D}_{\text {F}\alpha \beta }(k) + \big ( \tilde{D}_\text {F} \bar{\varPi }_\text {F} \tilde{\mathcal {D}}_\text {F} \big )_{\alpha \beta } \). As an example, the relation between \(\tilde{\mathcal {D}}_{\text {F}\alpha \beta }(k)\) and the component \(\tilde{\mathcal {D}}_{\alpha \beta }^{(++)}(k)\) reads
The insertion of \(\mathbf{M} _\eta \) and its inverse in the SchwingerDyson equation allows for the identification
The derivation of this is rather lengthy but can be found in Ref. [13] where, most importantly, it is argued that \(\bar{\varPi }_\text {F}\) is indeed the analytically continued selfenergy of the resummed propagator \(\tilde{\varDelta }_F'\) in Eq. (5.6). For notational convenience, possible spinor and Lorentz indices have been suppressed but are generally present in the structure of the KleinGordon divisor \(d_{\alpha \beta }^{ij}\).
By inserting the explicit expression for the thermal matrix \(\mathbf{M} _\eta \), the following relations may be deduced:
It is similarly straightforward to relate \(\tilde{\varPi }^{(+)}\) to \(\tilde{\varPi }^{(++)}\). Hence, a number of components has reduced from the initial four to a single independent one. The two relations above hold for any \(\sigma \), also for \(\sigma = 0\). Importantly for the forthcoming calculations, the real and imaginary parts of the selfenergies are related as
The selfenergy on the lefthand side will be calculated to the first order for several types of interaction vertices in Sects. 7–10.
5.4 Thermal convergence
Given the thermal scale parameterised by \(\beta \), several bulk properties may be used to describe any system provided proximity to equilibrium, e.g. thermodynamic pressure, and charge or energy densities. When performing practical calculations of such quantities or perturbative evaluations of the selfenergies discussed in the previous section, a cause for concern is the validity of the smallcoupling expansion. Thermal quantities are known to exhibit a poor convergence rate at high temperatures even for small values of the coupling constant. This is exemplified by the thermal pressure discussed by e.g. Braaten and Nieto [45] and calculated to \(\mathcal {O}(g^4)\) and later to \(\mathcal {O}(g^5)\) by Frenkel, Saa and Taylor [46] and Parwani and Singh [47] respectively. Their work considered \(g^2\phi ^4\)theories. Similar calculations have been further published by Andersen, Kyllingstad and Leganger [48] to \(\mathcal {O}(g^8\log g)\) and to \(\mathcal {O}(g^6)\) for general O(N) scalar theories by Gynther et al. [49]. The perturbative series for this pressure displays an oscillating behaviour such that the convergence gets worse for increasing temperature, even in the smallcoupling limit. One should therefore note that poor convergence is not solely an issue of thermal QCD, where this behaviour might be expected, but poor convergence rate has been observed also in scalar theories similar to those considered below. This intertheory issue of convergence could be seen as rather odd in the light of lattice gauge theory calculations as pointed out in [50] where it is further suggested that the main corrections are related to plasma (i.e. medium) effects.
Since the mid 1990’s, several authors have developed a calculational framework in order to improve convergence of perturbative thermal quantities; Braaten, Nieto, Arnold, Zhai, Strickland and Anderson [45, 50,51,52], among others, have contributed to the field of hard thermal loop resummation which focuses on rearranging and resumming terms at all orders in perturbation theory. The major point of this approach is to distinguish the so called hard terms of order T that obey a perturbative treatment and the soft terms of order gT that require effective propagators and vertices as noted by [51] for gauge theories in the medium. The gauge invariance of this approach is a primary advantage and the main idea is neatly presented in [50].
It should be noted that no such resummation technique has been applied to the selfenergy calculations in Sects. 7–10 and hence to the subsequent provided decay rates. This urges an investigation into the importance of thermal resummation so as to provide understanding of the convergence rate of perturbatively evaluated decay rates.
6 Thermal decay rates
In this section, the selfenergies of the previous section will be related to the thermal decay rates. Initially, a relation between the thermal quantity that corresponds to the zerotemperature decay rate and the selfenergy of the imaginarytime formalism due to Weldon [14] will be presented. This relation will then be restated in terms of the selfenergy components of the realtime formalism by making use of the selfenergy relations in Sect. 5.3.
6.1 Thermal rates in Matsubara formalism
The decay rate \(\gamma _D\) for a given process in the zerotemperature theory may be related to the discontinuity of the selfenergy (i.e. its imaginary part) by means of the optical theorem as
where \(E_0\) is the energy of the decaying particle. Weldon [14] defined a similar quantity \(\varGamma (p_0)\) through
where \(\bar{\varPi }_\text {F}\) is the selfenergy of the imaginarytime formalism.
It is important to reflect upon the physics that this quantity describes. One may assume that the distribution of a particle \(\varPhi \) at some time \(t_\text {in}\) is described by a nonequilibrium function which Weldon labelled as \(f(p_0,t_\text {in})\) [14]. This function will approach the thermal distribution of the equilibrium (BoseEinstein or FermiDirac) in a simple manner if a deviation from equilibrium is small (\(\partial f/\partial t \ll 1\)). The rate of this approach is parametrised by \(\varGamma (p_0)\) to the first order. The evolution of this distribution may be formulated according to
in terms of the quantities \(\varGamma _D\), \(\varGamma _I\). Here, the first term expresses the loss of \(\varPhi \)particles through decay modes while \(\varGamma _I\) takes into account particle production by the medium. The thermal medium is filled with particles that couple to \(\varPhi \) and, hence, the second parameter \(\varGamma _I\), the inverse decay rate (production rate), adds the contribution from processes in the medium that produce \(\varPhi \) particles. As an example, production may occur through reactions \(\phi \phi \rightarrow \varPhi \). Weldon comprehensively presents an analysis of possible production and decay channels for \(\varPhi \) through interactions with particles in the thermal medium.
The solution to Eq. (6.17) is
for some function \(c(p_0)\) which is constant in time. This solution requires that the temperature T is constant over time which is true for equilibrated media. Since T characterises the background medium, the deviations of the \(\varPhi \) distribution from its equilibrium limit are required to be small and one may assume that the distribution of the medium particles corresponds to the thermal equilibrium distribution. The net decay rate \(\varGamma \) of the distribution of \(\varPhi \) in the medium is the rate at which the distribution of \(\varPhi \) approaches the equilibrium regime and amounts to
The evaluation of the amplitude for the thermal forward decay \(\varGamma _D\) is of interest in this work. Weldon provides a thermal relation between the forward and inverse decay rates due to unitarity so that one therefore may write the decay rate of \(\varPhi \) as
The expression provided by Weldon has hereby been extended in order to explicitly take into account the role of the chemical potential \(\mu \).
6.2 Thermal rates in the realtime formalism
The relations of Sect. 5.3 connect the selfenergy of the Matsubara formalism to the components of the realtime selfenergy. Hence, Eq. (6.20) may be rewritten as
In the following Sects. 7–10, the \((++)\)component of the realtime selfenergy for several types of interactions has been evaluated. The results are used to extract the decay rates for fields in an equilibrated thermal medium.
Note that, if \(\tilde{\varPi }^{(++)}\) comes with internal or Lorentz indices, one may follow the procedure advised by Weldon [14] and define the scalar function
which represents a contraction with asymptotic states. This allows for a probabilistic interpretation of \(\varSigma \) as a decay rate, similar to a BreitWigner resonance, for any particle species.
For future convenience in the following sections, the ratio of the thermal decay rate above to the zerotemperature limit, as used in the analysis by Ref. [35], may be defined as
This quantity is a parametrisation for the deviation of thermal theory predictions from those in the zerotemperature limit. If this ratio is equal to unity for all temperatures, the medium has no effect on decay rates.
7 (Pseudo)scalar decay into two (pseudo)scalars
We are now equipped with the formalism and the relations needed for computation of thermal decay rates. This section provides a detailed analysis of the thermal decay rate at which a neutral (pseudo)scalar particle \(\varPhi \) of mass M decays into a pair of neutral (pseudo)scalar particles \(\phi ^1\phi ^2\) of masses \(m_1\), \(m_2\). The scalars in the final state may not be identical in the following expressions. Note, however, that all scalars considered here are neutral particles. The interaction term responsible for such a decay process reads
The resulting scalar boson selfenergy discussed in this section has been previously published in Ref. [41] and represents an important example of the usage of the realtime TFT framework.
7.1 Realtime selfenergy of the scalarscalar eyediagram
Using the interaction term of Eq. (7.1), one may draw the following eyediagram:
This is the matrix eyediagram that appears at the first order in the Dyson series representing the full interacting propagator of \(\varPhi \). The crosses denote either external legs or connections to vertices. The \(\varPhi \)lines in the loop diagram are amputated in the following selfenergy calculation. Note that this diagram represents all allowed propagator combinations^{Footnote 14} The intermediate particles are not restricted to the physical field component \(\phi _{+}\) while the external legs are. As a consequence, all valid combinations of propagators in the loop must be considered when calculating the total amplitude for this diagram. The \((+)\) and \(()\)field components do not mix in the vertices, cf. Fig. 6, but propagate into each other due to the offdiagonal propagator elements. Besides, each vertex contributes with a factor of , respectively.
In order to obtain the thermal decay rate, the selfenergy of Eq. (7.2) will be evaluated below and it is defined by the loop diagram
All matrix components of this selfenergy are related through Eq. (5.10), and evaluation of the \((++)\)component is sufficient in order to obtain the decay rate. This component is
Note here the prefactor; \(\delta _{12}\) is defined as unity if the two particles in the loop are identical and zero otherwise. Hence, the correct symmetry factor will be taken into account when considering either identical or distinct loop particle species. The twocomponent structure of the scalar propagator splits the bubble into four terms indicated above: a nonthermal (temperature independent) integral \(I_\text {SS}^{(2)}\), two mixed integrals \(F_\text {SS}^{(2)}\) and \(( 1 \leftrightarrow 2)\), and one purely thermal integral \(F_\text {SS}^{(3)}\). The bracketed arrow denotes a naïve interchange of indices 1 and 2 in the second mixed term. The explicit integrals are given as follows
The evaluation of the types of integrals above is discussed in some detail in section Appendix B.
7.1.1 Nonthermal selfenergy term
The nonthermal contribution to the selfenergy is wellknown from zerotemperature QFT. It may be evaluated by dimensional regularisation techniques in \(D = 4  2\epsilon \) dimensions at the renormalisation scale \(\bar{\mu }\). The resulting expression for the nonthermal integral is
Here, \(1/\tilde{\epsilon }\) parametrises the divergence emerging from the dimensional regularisation scheme and, denoting the EulerMascheroni constant by \(\gamma _\text {E}\), it is defined as \(\tfrac{1}{\tilde{\epsilon }} = \tfrac{1}{\epsilon }  \gamma _\text {E} + \ln {4\pi }\). The last term \(I_\text {loop}\) is the term of interest to the decay rate since it is complex.
The cases are defined as the momentum regions

(a)
\(p^2 \ge (m_1 + m_2)^2\),

(b)
\((m_1  m_2)^2 \le p^2 < (m_1 + m_2)^2\),

(c)
\(p^2 < (m_1  m_2)^2\),
and
The imaginary part of Eq. (7.8) reads as follows
7.1.2 Mixed selfenergy term
The mixed selfenergy contribution consists of two complex propagator cross terms. The evaluation of the imaginary component of those integrals results in
Here,
Two further cases have been defined as

(c1)
\(0 \le p^2 < (m_1  m_2)^2\),

(c2)
\(p^2 < 0\).
It is an interesting observation that the imaginary part of the selfenergy receives a contribution in the region \(0 \le p^2 < (m_1  m_2)^2\) where decays are forbidden at zero temperature. At finite temperature, however, the medium particles may interact with the decaying particle so as to provide a novel channel through absorption of a particle from the medium. The topology of different decay channels are discussed in comprehensive detail by Weldon [14].
The real part of the mixed term is
Here .
7.1.3 Thermal selfenergy term
The thermal contribution to the selfenergy has no real component and is given by the purely imaginary expression
The further two cases were defined as

(d1)
\(m_2 \ge m_1 \,\,\, \vee \,\,\, m_2 < m_1\). The leftmost inequality corresponds to the upper sign. The rightmost inequality corresponds to the lower sign.

(d2)
\(\bigg \{ \Big [ m_2 \ge m_1 \,\, \wedge \,\, 1 + \frac{m_2^2  m_1^2}{p^2} \ge 0 \Big ] \,\,\, \vee \,\,\, m_2< m_1 \bigg \} \, \vee \, \bigg \{ m_2 \ge m_1 \,\, \wedge \,\, 1 + \frac{m_2^2  m_1^2}{p^2} < 0 \bigg \}\). The leftmost curly bracket corresponds to the upper sign. The rightmost curly bracket corresponds to the lower sign.
It is important to notice that in the above expression for a purely thermal contribution, the mass parameters \(m_1\), \(m_2\) in \(\omega _{2, p_\pm }\) should be replaced by expressions \(\text {min}\{ m_1, m_2 \}\) and \(\text {max}\{ m_1, m_2 \}\), respectively.
The combined \((++)\)selfenergy component of the eyediagram given in Sects. 7.1.1–7.1.3 was provided by Nishikawa et al. [41] as part of the evaluation of the sunset diagram and has been included here for completeness.
7.2 Decay rate of \(\varPhi \rightarrow \phi \phi \)
This section presents the thermal decay rate of a scalar particle into two scalar particles with the rate given by Eq. (6.21), in Sect. 6.2. In the case of identical loop masses, the expression for the selfenergy simplifies significantly due to vanishing terms in the mass function \(\sqrt{C}\) and \(\omega _{2, p_\pm }\). The ratio of Eq. (6.23) may be obtained by considering the limiting case of \(p^2 = M^2 \gg (m_1 + m_2)^2\), rendering the particles in the loop effectively massless. The plotted ratio can be seen in Fig. 8a–c for a nonrelativistic, relativistic and ultrarelativistic incoming particle \(\varPhi \). The figures reproduce the findings of Ho and Scherrer [35] who considered the case of identical loop masses \(m_1 = m_2 = 0\) evaluated in the imaginarytime formalism and their result has hereby been verified in the realtime formalism. The limit as \(T\rightarrow 0\) for the ratio is \(R_{\varPhi \rightarrow \phi \phi } \rightarrow 1\) as required.
The deviation from Ref. [35] when loop masses \(m_1\), \(m_2\) are not identical was investigated. Such deviations are clearly relevant only in the case of \(M \sim m_1, m_2\), close to the equality of \(M^2 = (m_1 + m_2)^2\). An analysis of the selfenergy presented earlier in this section shows that the behaviour is qualitatively similar to Fig. 8a–c. Furthermore, in the mass region \(0 \le M^2 < (m_1  m_2)^2\) and for virtual \(\varPhi \) with \(p^2 < 0\), the behaviour of \(\varGamma _{\varPhi \rightarrow \phi \phi }\) is also quadratically growing with temperature. Hence, these regions exhibit a qualitatively similar behaviour compared to the plotted cases.
8 Scalar decay into a fermionantifermion pair
This section presents the thermal rate at which a neutral scalar particle \(\varPhi \) decays into a fermionantifermion pair \(\psi ^2\bar{\psi }^1\). One model that gives rise to such decay process is
The particles are associated with masses M for \(\varPhi \) and \(m_i\) for \(\psi ^i\).
8.1 Realtime selfenergy of the fermionantifermion eyediagram
In analogy to the case of the scalarscalar loop considered in the previous section (Sect. 7), the selfenergy of the eyediagram is related to the thermal decay rate of the process \(\varPhi \rightarrow \psi ^2\bar{\psi }^1\). Also here, all valid combinations of field components must be taken into account but only one selfenergy component is independent, see Eq. (5.10), and the evaluation of the selfenergy \((++)\)component is sufficient to extract the thermal decay rate. This component reads
Note, the overall negative sign appears together the trace over spinor indices in the case of a fermion loop. The bracketed arrow represents the second mixed integral that arises from propagator cross terms. As in the case of the scalarscalar loop, the bubble has split into four terms and the explicit integrals are
The trace is common to all integrals and evaluates to
8.1.1 Nonthermal selfenergy term
The nonthermal contribution is again known from the zerotemperature theory and the imaginary part of interest to the decay rate calculation may be extracted. The imaginary part of \(iI_{\text {F} \bar{\text {F}}}^{(2)}(p^2; m_1, m_2)\) reads
where C is identical to the definition in Sect. 7. In the case of identical loop masses, the expression reduces to
This matches the corresponding result in the literature, see e.g. Ref. [53].
8.1.2 Mixed selfenergy term
The mixed selfenergy contribution consists of two complex cross terms. The evaluation of the imaginary component of those terms results in
Here, \(\omega _{1, p_\pm }\) has been defined analogously to \(\omega _{2, p_\pm }\) in Sect. 7 with interchanged masses.
In compact notation, the real part may be written as
where
8.1.3 Thermal selfenergy term
The purely thermal contribution to the selfenergy has no real component and may be found as
Note that in this final expression for the thermal contribution, the mass parameters \(m_1\), \(m_2\) should again be replaced by \(\text {min}\{ m_1, m_2 \}\) and \(\text {max}\{ m_1, m_2 \}\), respectively; cf. Sect. 7.1.3.
The explicit \((++)\)component of the realtime selfenergy of the fermionic eyediagram presented above in Sects. 8.1.1–8.1.3 has not been found in the literature to the best of our knowledge.
8.2 Decay rate of \(\varPhi \rightarrow \psi \bar{\psi }\)
The thermal decay rate of a neutral scalar is given by Eq. (6.21) in Sect. 6.2. Similar to the decay rate treated in Sect. 7, the particles in the loop were considered to have the same mass m and the limit of \(p^2 = M^2 \gg 4m^2\) has been plotted in Fig. 9. In this mass region, the ratio of Eq. (6.23) may be obtained since the zerotemperature decay rate does not vanish here. The plotted ratio can be seen for nonrelativistic, relativistic and ultrarelativistic \(\varPhi \). The figure agrees with the findings of Ho and Scherrer [35] who evaluated the loop in the Matsubara formalism. The limit as \(T\rightarrow 0\) is \(R_{\varPhi \rightarrow \psi \bar{\psi }} \rightarrow 1\) as expected.
9 Pseudoscalar decay into a fermionantifermion pair
This section presents the thermal rate at which a neutral pseudoscalar particle \(\varPhi _5\) decays into a fermionantifermion pair \(\psi ^2\bar{\psi }^1\) as calculated in this work in the realtime formalism. This case was explicitly considered in order to contrast the pseudoscalar result with the result for a scalar particle provided in Sect. 8. The corresponding interaction term is
Here, the vertex factor of \(\gamma _5\) requires some care when evaluating the loop diagrams in comparison to the previous section. In what follows, masses have been assigned according to \(M_5\) for \(\varPhi _5\) and \(m_i\) for \(\psi ^i\).
9.1 Realtime selfenergy of the fermionantifermion eyediagram
In analogy to the case of the scalarscalar loop in Sect. 7, the selfenergy of the eyediagram is related to the thermal decay rate of the process \(\varPhi _5 \rightarrow \psi ^1\bar{\psi }^2\). Also here, all valid combinations of field components must be taken into account but only one selfenergy component is independent, see Eq. (5.10), and the evaluation of the selfenergy \((++)\)component is sufficient to extract the thermal decay rate. This component is found as follows
As for the \(\varPhi \rightarrow \psi ^2\bar{\psi }^1\)process considered in the previous section, an overall minus sign appears as well as the trace over \(\gamma \)matrices. The loop integration splits into four terms, all similar to the previous section but for the addition of the two vertex factors of \(\gamma _5\). The bracketed arrow denotes the second mixed cross term. The emerging trace may be taken in the naïve dimensional regularisation scheme since the diagram appears at oneloop level^{Footnote 15}. The trace evaluated in the naïve dimensional regularisation scheme reads
The sign differences compared to the case of a decaying scalar particle are an overall positive sign together with the minus sign in front of \(m_1 m_2\). The overall sign change may be reverted by imposing hermiticity of the Lagrangian and thereby force the pseudoscalar coupling to \(\bar{\psi }^1\gamma _5\psi ^2\) to become purely imaginary, i.e. . The sign difference of the mass term is more intriguing and signifies a fundamental difference between the scalar and pseudoscalar decay rates. The result is a decay rate for the pseudoscalar that goes to zero slower than the corresponding rate for a scalar particle in the limit of the threshold \(p^2 \rightarrow (m_1 + m_2)^2\). This gives the pseudoscalar particle an intrinsically longer mean lifetime in comparison to the scalar particle.
Apart from the mentioned differences in relative signs, the resulting selfenergy integrals for the pseudoscalar case are identical to those for the scalar case. To obtain the correct nonthermal, mixed and purely thermal selfenergy integrals it is sufficient to replace \(m_1 \rightarrow m_1\) in the integrals from the previous section.
9.1.1 Nonthermal selfenergy term
The nonthermal contribution in the case of an external pseudoscalar particle is related to the case of an external scalar particle as
The righthand side is the result found in Sect. 8.1.1.
9.1.2 Mixed selfenergy term
The mixed thermal contribution in the case of an external pseudoscalar particle is related to the case of an external scalar particle as
The righthand side is the result found in Sect. 8.1.2.
9.1.3 Thermal selfenergy term
The purely thermal contribution in the case of an external pseudoscalar particle is related to the case of an external scalar particle as
The righthand side is the result found in Sect. 8.1.3.
9.2 Decay rate of \(\varPhi _5 \rightarrow \psi \bar{\psi }\)
The thermal decay rate of a neutral pseudoscalar is given by Eq. (6.21) in Sect. 6.2. Similar to the decay rate treated in Sects. 7 and 8, the particles in the loop were considered to have the same mass m and the pseudoscalar was assumed to fulfill the onshell condition \(p^2 = M_5^2 \gg 4m^2\). The decay rate behaves qualitatively similar to that of a scalar decay (see Fig. 9) as stated by Ho and Scherrer [35] while one should note a discrepancy between the two cases close to the equality \(M_5^2, M^2 = 4m^2\). This is a nonthermal effect due to the mentioned sign differences in the above subsection and it is presented in Fig. 10 for clarity, at \(T=0\), with normalised masses M, \(M_5\) given in units of m. The ratio \(\varGamma _{\varPhi _5 \rightarrow \psi \bar{\psi }}/\varGamma _{\varPhi \rightarrow \psi \bar{\psi }}\) is plotted as a function of the mass of the external (pseudo)scalar. Close to the equality \(M^2 = 4m^2\), the expression diverges which implies that the scalar decay rate vanishes quicker than the pseudoscalar decay rate. Normalising the fermion mass to \(m=1\), the ratio diverges at threshold \(M=2m\).
10 Emission of a (pseudo)scalar off a fermion pair
The interaction term of Eq. (8.1) in Sect. 8 allows for the emission of a scalar off a fermion line. The amplitude for such emission may be evaluated by considering (pseudo)scalar corrections to the fermion line. In this section, the thermal selfenergy of the scalarfermion oneloop diagram is presented.
10.1 Realtime selfenergy of the scalarfermion eyediagram
The scalarfermion interaction term of Eq. (8.1) gives rise to the eyediagram
As in the previous sections, the thick lines of the loop denote the full realtime thermal propagator in its matrix structure with components of Eqs. 4.20, 4.25. The \(\psi ^2\)lines may connect either to vertices or external legs. This diagram in itself is in the matrix form and represents the full sum of thermal diagrams, similar to the case of the scalar bubble in Sect. 7, including both physical chronological and unphysical antichronological field components. Using the same convention as for the previous calculations, the selfenergy matrix is defined as follows
where, for the case of interest, the vertices couple to the fermion lines on external legs. The \((++)\)component of this diagram is
The four integrals extracted above correspond to the nonthermal contribution, the mixed thermal contribution and the purely thermal contribution to the selfenergy. The second mixed term, expressed through the bracketed arrow, is similar to its preceding term but with the thermal term of the fermion propagator and the nonthermal term of the boson propagator interchanged. The explicit forms are
10.1.1 Nonthermal selfenergy term
Relevant to the emission is the imaginary part of the nonthermal contribution to the \((++)\)component of the selfenergy. It may be extracted by a similar procedure performed in Sect. 8.1.1. Evaluated by the dimensional regularisation techniques, the imaginary part of Eq. (10.5) is found to be
Here,
10.1.2 Mixed selfenergy term
The mixed selfenergy contribution consists of two complex cross terms from the product of the propagators: the integrals in Eqs. (10.6) and (10.7). The resulting imaginary component of the sum of the integrals is a rather long expression when written down explicitly. For clarity, the result is therefore presented for each momentum region separately.
If \(p^2 \ge (m_1 + M)^2\):
where
\(\text {Li}_2(z)\) is the analytic continuation of Spence’s function, the dilogarithm
which cancels exactly the imaginary part that arises due to the negative sign of \(1  e^{\beta \omega _{M, p_\pm }}\) in the two analytically continued logarithmic terms in Eq. (10.10).
If \((m_1  M)^2 \le p^2 < (m_1 + M)^2\):
If \(0 \le p^2 < (m_1  M)^2\):
Here, the upper sign applies if \(M \ge m_1\) and the lower sign if \(M < m_1\). Compare to the similar case (d1) in Sect. 7.1.3.
If \(p^2 < 0\):
Here, the upper and lower signs correspond to the modified case (d2) defined in Sect. 7.1.3. The modification is analogous to the modification of the case (d1) in the section above for \(0 \le p^2 < (m_1  M)^2\) and, as a consequence, the result depends on the mass hierarchy of M, \(m_1\).
10.1.3 The purely thermal selfenergy term
The thermal selfenergy contribution in Eq. (10.4) is purely imaginary, cf. previous selfenergy evaluations in Sects. 7.1.3, 8.1.3 and 9.1.3. The resulting expression for this term, after momentum integration, is again rather long. Therefore, different regions of \(p^2\) are presented separately below for clarity.
If \(p^2 \ge (m_1 + M)^2\):
If \((m_1  M)^2 \le p^2 < (m_1 + M)^2\):
If \(0 \le p^2 < (m_1  M)^2\):
Again, the upper and lower signs correspond to the modified case (d1) discussed in Sect. 10.1.2 in order to take into account the hierarchy between M, \(m_1\).
If \(p^2 < 0\):
Also here, the sign cases correspond to a modified (d2).
Note that in the final expression for the purely thermal contribution, Eqs. (10.16)–(10.19), the mass parameters \(m_1\), M should be replaced by \(\text {min}\{ m_1, M \}\) and \(\text {max}\{ m_1, M \}\), respectively; cf. Sect. 7.1.3.
The explicit \((++)\)component of the realtime selfenergy of the fermionic eyediagram presented in Sects. 10.1.1–10.1.3 above is not present in the literature to the best of our knowledge.
10.2 Pseudoscalar emission off the fermion line
Analogously to Sect. 9, the pseudoscalar interaction term \(\bar{\psi }\gamma _5\psi \) provides an additional vertex factor of \(\gamma _5\) compared to the case of scalar emission considered in the previous three sections. In the naïve dimensional regularisation scheme, \(\gamma _5\) anticommutes with the \(\gamma \)matrix in the numerator of the fermion propagator and thereby provides an overall sign change together with a sign change of the numerator mass \(m_1\). These sign changes are stated relative to the obtained results of Sects. 10.1.1–10.1.3 and a conclusion completely analogous to Sect. 9 is reached.
10.3 Scalar emission rate of the process \(\psi ^2 \rightarrow \psi ^1\varPhi \)
The thermal rate for the scalar emission provided in this section is given by Eq. (6.21) in Sect. 6.2. In order to extract an observable from the selfenergy presented in Sects. 10.1.1–10.1.3, that carries spin structure, it is advisable to follow the strategy provided by Weldon [14] to define
This is the selfenergy contracted with incoming and outgoing states. These states satisfy the Dirac equation ( as well as \(\bar{u}(p)u(p) = 2\sqrt{p^2}\). In terms of \(\varSigma \), the discontinuity over the real axis of this new scalar function may be related to the thermal decay rate. More specifically, the contraction of the three different prefactors that appear in the selfenergy and which contain explicit \(\gamma \)matrices, is of interest. Assuming the external \(\psi ^2\) to be onshell (\(p^2 = m_2^2\)), the contraction results in
The ratio of Eq. (6.23) may be obtained for example in the mass region of \(p^2 = m_2^2 \gg (m_1 + M)^2\) effectively rendering the particles in the loop massless. The plotted ratio can be seen in Fig. 11 for a nonrelativistic, relativistic and ultrarelativistic incoming particle \(\psi ^2\). In the limit \(T \rightarrow 0\) the decay ratio \(R_{\psi ^2 \rightarrow \psi ^1\varPhi } \rightarrow 1\).
The linear dependence on T of the selfenergy seen in Fig. 11 is initially surprising in comparison to the quadratic temperature dependence of the selfenergy of the scalarscalar loop seen Fig. 8. This difference in behaviour may be explained in the hightemperature limit. The dependence on temperature of the free propagator comes from the term proportional to the thermal distribution function , see Eq. (4.20). Expanding this function in the hightemperature limit (or small \(\beta \)) results in different powers of T of the leading term for bosons and fermions, respectively. For bosons, the temperaturedependence of the propagator is proportional to T while the leading term for the fermion propagator is constant in T. Hence, it is seen that for \(T \rightarrow \infty \), the scalarscalar loop of Sect. 7 contains a term that is quadratic in T (the purely thermal part) while the scalarfermion loop of Sect. 10 contains terms proportional at most only to T.
11 Summary and outlook on thermal decays
Thermal effects on key observables in particle physics have caught a strong interest and attention of both theorists and experimentalists over past few decades. The key results of the thermal field theory (TFT) appear to be scattered over many different sources in the literature, and a complete and consistent compendium of these results is yet missing. This review provides a pedagogical overview of the most important elements of the equilibrium TFT in both imaginary and realtime formulations, together with the most immediate and relevant applications for all possible particle decays in thermal medium in a generalised Yukawa theory. A special attention is given to the realtime formulation and its predictions for particle twobody decay rates that are compared and verified against the existing results in the imaginarytime (Matsubara) framework, widely used in the literature. This represents an important step towards a proper generalisation of TFT towards inequilibrium particle dynamics that can be consistently achieved in the realtime framework.
Starting from a theoretical overview of the very general and basic principles of TFT formulated by Wagner [18], we present a collection of possible decay rates for a theory containing generic (pseudo)scalar bosons and fermions. Several thermal oneloop calculations were performed within the scope of this work in the realtime framework. Components of the selfenergy were related to a quantity interpreted as a thermal decay rate of a field in an equilibrated medium which is considered in various possible kinematical domains.
A (pseudo)scalar state decaying into a pair of (pseudo)scalar particles was considered as well as a (pseudo)scalar decaying into a fermionantifermion pair. The thermal rate of a (pseudo)scalar emission off a fermion line is also provided. For all these processes, except for the (pseudo)scalar decay into a fermionantifermion pair, an enhancement of the thermal decay rate was quantified relative to the corresponding zerotemperature decay rate. In the case of a (pseudo)scalar decaying into two distinct (pseudo)scalars, this enhancement is quadratically growing with temperature, see Fig. 8a–c. Considering instead a scalar boson emission off a fermion line, the Tdependence is linear at high temperatures, see Fig. 11.
As a practically important example, we notice a relative thermal suppression present in the case of a fermionantifermion final state emerging from an incoming (pseudo)scalar. The rate of this process was shown to be 0.25 times the zerotemperature quantity at high temperatures. The realtime selfenergy is proportional to a factor of (\(1n_{\text {F}/\bar{\text {F}}}\)) for each outgoing fermion/antifermion in the same way as in the imaginarytime formalism [14]. Hence, the outgoing particles are accompanied by Pauli suppression through the distribution function \(n_\text {F}\); at high temperatures, this distribution approaches 1/2 and the outgoing particles are Pauli blocked by medium particles with this probability as is manifested in Fig. 9.
The oneloop selfenergy for (anti)commuting fields had previously been written down in the imaginarytime formalism by Weldon [14]. Ho and Scherrer[35] extracted decay rates for the processes of Sects. 7–8 using the results of Weldon. This work confirms the thermal decay rate of Ref. [35] in the referenced sections within the realtime formalism. The decay rates have been further extended beyond the results of Ref. [35] to include the chemical potentials, and, more importantly, the masses of particles in the loop have been allowed to take on different values. Hence, a new momentum region \(0 \le p^2 < (m_1  m_2)^2\) has been investigated for a (pseudo)scalar decaying into two (pseudo)scalars, a region in which decays are kinematically forbidden in the zerotemperature theory.
The explicit realtime selfenergy of the scalarscalar loop has been published previously in Ref. [41] and was reproduced in this work. The fermionfermion selfenergy has been discussed in Ref. [14] in the imaginarytime formalism. The calculated decay rate of Fig. 9 reproduces the imaginarytime result of Ref. [35] if the masses of virtual states are taken to be identical. The explicit realtime selfenergy of the scalarfermion selfenergy does not exist in the literature to the best of our knowledge. The thermal decay rate has been extracted from such a selfenergy, see Fig. 11.
Data Availability Statement
This manuscript has no associated data or the data will not be deposited. [Authors’ comment: This is a review based on theory and no experimental data entered the analysis. Therefore, no data will be supplementing this work.].
Notes
A pure state \(\left \varPsi \right\rangle \) has \(\hat{\rho } = \left \varPsi \right\rangle \left\langle \varPsi \right \) and one may in this case note the idempotency \(\hat{\rho }^2 = \hat{\rho }\).
Keeping the density of states constant, the replacement \(\frac{1}{V}\sum _k \rightarrow \int \! \frac{{\hbox {d}}^3 k}{(2\pi )^3}\) is valid.
This work presents the formalisms and results in the rest frame of the medium, for simplicity. A Lorentzcovariant formulation of the grand canonical ensemble has been introduced by Niemi and Semenoff in Ref. [11].
For more details, we refer the interested reader to any suitable textbook on QFT, e.g. Ref. [1].
The functional integration \(\int [\mathcal {D} \phi ]\) represents the summation over all sufficiently differentiable and integrable functions that must be taken into account when considering all paths. However, the total space of all functions is vastly larger and there exists no rigorous method of picking out only the physically relevant functions in the pathintegral. The main strategies include pulling back to a discrete formulation, as is done in the field of lattice theories, or to normalise the theory to a reference problem that is analytically solvable.
No such couplings are assumed to exist in the theory in order for the integration over the canonical momentum variable in the generating functional to be analytically performed. As an immediate consequence, the free scalarfield action reduces to \(S = \int \! {\hbox {d}}^4 x \, \frac{1}{2}\Big (\partial _\mu \phi \partial ^\mu \phi  m^2\phi ^2 \Big ) \rightarrow \int \! {\hbox {d}}^4 x \, \frac{1}{2} \phi \Big ( \! \partial ^2  m^2 \Big )\phi \), up to an inessential total derivative term.
The matrix \(\mathcal {A}_{\alpha \beta }\) ensures invariance of the Lagrangian under Lorentz transformations of . In the case when \(\alpha \) is an index of the Dirac spinor representation, \(\mathcal {A} \equiv \gamma ^0\).
This periodicity condition ensures preservation of the trace interpretation and without it the functional integral would no longer generate the trace: .
Recall that the contour is a consequence of the trace interpretation of the pathintegral formulation with one of the states shifted by the thermal density operator. The imposed restriction on the imaginary part of the contour is required for the application of the FSMformula of Eq. (2.85).
On the Matsubara contour, the propagator may be expressed in terms of the real variable \(\tau \) so that \(tt' \rightarrow \tau  \tau '\) and \(\varTheta _C(tt') \rightarrow \varTheta (\tau \tau ')\).
This diagonalisation procedure was first formulated by Umezawa, Matsumoto and Tachiki [24] in the framework of thermo field dynamics.
Neutral bosons have \(\eta = +1\) and \(\mu = 0\). Note, for the scalar field (commuting or anticommuting) the KleinGordon divisor \(d_{\alpha \beta }(k) = 1\).
A 1PI diagram is defined to be any diagram that cannot be split into two parts by removal of a single propagator line. The 1PI blob shown in Fig. 7 is defined as the sum of all such diagrams with the eyediagram (the single loop) being the lowestorder contribution. See Ref. [1] for a discussion of the 1PI insertion procedure. One must note, however, that the properly defined selfenergy includes oneparticle reducible diagrams as well, e.g. tadpole diagrams that can be regulated separately.
The thick lines are drawn in order to indicate the free matrix propagator. Hence, the diagram represents the sum of diagrams over all valid combinations of \(\phi _+\), \(\phi _\).
.
Calculations potentially require a more robust scheme at higher loop orders. For example, in the evaluation of threebody decays another scheme is required [54].
An additional complication is of course potential tensor structures of the propagators but also in this case, solution at zero temperature exists in the literature (see e.g. Refs. [55,56,57,58]). The case is further complicated in thermal theories by the presence of the medium in the sense that the space of basis tensors is larger than in zerotemperature theory and for this case, no well established procedure is in place.
This theorem in its version for the real number line often appears in physics but is rarely mentioned by name. It was proven by Julian Sochocki in 1868 and rediscovered by Josip Plemelj in 1908.
References
M.E. Peskin, D.V. Schroeder, An Introduction to Quantum Field Theory (Westview Press, Boulder, 1995)
S. Weinberg, The Quantum Theory of Fields. Vol. 1: Foundations (Cambridge University Press, Cambridge, 2005)
A. Zee, Quantum Field Theory in a Nutshell (Princeton University Press, Princeton, 2003)
J. ZinnJustin, Quantum field theory and critical phenomena. Int. Ser. Monogr. Phys. 113, 1–1054 (2002)
F. Bloch, Zur Theorie des Austauschproblems und der Remanenzerscheinung der Ferromagnetika. Zeit. Phys. 74(5–6), 295–335 (1932)
T. Matsubara, A new approach to quantumstatistical mechanics. Prog. Theo. Phys. 14(4), 351–378 (1955)
R. Kubo, Statisticalmechanical theory of irreversible processes. I. J. Phys. Soc. Jpn. 12(6), 570–586 (1957)
P.C. Martin, J. Schwinger, Theory of manyparticle systems. I. Phys. Rev. 115(6), 1342–1373 (1959)
L.V. Keldysh, Diagram technique for nonequilibrium processes. JETP 20(4), 1018–1026 (1965)
H. Matsumoto, Y. Nakano, H. Umezawa, F. Mancini, M. Marinaro, Thermo field dynamics in interaction representation. Prog. Theo. Phys. 70(2), 599–602 (1983)
A.J. Niemi, G.W. Semenoff, Finitetemperature quantum field theory in Minkowski space. Ann. Phys. 152(1), 105–129 (1984)
R.L. Kobes, K.L. Kowalski, Pathintegral formulation of realtime finitetemperature field theory. Phys. Rev. D 34(2), 513–518 (1986)
N.P. Landsman, C.G. van Weert, Real and imaginarytime field theory at finite temperature and density. Phys. Rep. 145(3–4), 141–249 (1987)
H.A. Weldon, Simple rules for discontinuities in finitetemperature field theory. Phys. Rev. D 28(8), 2007–2015 (1983)
R.L. Kobes, G.W. Semenoff, Discontinuities of Green functions in field theory at finite temperature and density. Nucl. Phys. B 260(2–3), 714–746 (1985)
R.L. Kobes, G.W. Semenoff, Discontinuities of Green functions in field theory at finite temperature and density (II). Nucl. Phys. B 272(2), 329–364 (1986)
T.S. Evans, Npoint finite temperature expectation values at real times. Nucl. Phys. B 374(2), 340–370 (1992)
M. Wagner, Expansions of nonequilibrium Green’s functions. Phys. Rev. B 44(12), 6104–6117 (1991)
P. Danielewicz, Quantum theory of nonequilibrium processes. I. Ann. Phys. 152(2), 239–304 (1984)
Kc Chou, S. Zhaobin, Bl Hao, Y. Lu, Equilibrium and nonequilibrium formalisms made unified. Phys. Rep. 118(1–2), 1–131 (1985)
M. Garny, M.M. Müller, KadanoffBaym equations with nonGaussian initial conditions: the equilibrium limit. Phys. Rev. D 80(8), 085011 (2009)
P. Millington, A. Pilaftsis, Perturbative nonequilibrium thermal field theory. Phys. Rev. D 88, 8 (2013)
P. Millington, Thermal quantum field theory and perturbative nonequilibrium dynamics. PhD thesis, University of Manchester. (2014)
H. Umezawa, H. Matsumoto, M. Tachiki, Thermo Field Dynamics and Condensed States (NorthHolland Publishing Company, Amsterdam, 1982)
H. Matsumoto, Y. Nakano, H. Umezawa, An equivalence class of quantum field theories at finite temperature. J. Math. Phys. 25(10), 3076–3085 (1984)
Y. Fujimoto, M. Morikawa, M. Sasaki, Imaginary part in thermo field dynamics. Phys. Rev. D 33(2), 590–593 (1986)
A. Das, Finite Temperature Field Theory (World Scientific Publishing Co Pte Ltd., Singapore, 1997)
L. Dolan, R. Jackiw, Symmetry behavior at finite temperature. Phys. Rev. D 9(12), 3320–3341 (1974)
R.P. Feynman, A.R. Hibbs, Quantum Mechanics and Path Integrals (McGrawHill, New York, 1965)
P.T. Matthews, A. Salam, Propagators of quantized field. Il Nuovo Cimento 2(1), 120–134 (1955)
R. Mills, Propagators for manyparticle systems: an elementary treatment. Gordon and Breach Science Publishers, 150 Fifth Avenue, New York, pp. 10011 (1969)
H.A. Weldon, Chemical potentials in realtime thermal field theory. Phys. Rev. D 76(12), 125029 (2007)
N.P. Landsman, Consistent realtime propagators for any spin, mass, temperature and density. Phys. Lett. B 172(1), 46–48 (1986)
A.S. Wightman, The general theory of invariant wave equations. In G. Velo, A.S. Wightman, editors, Invariant wave equations, volume 73, pp. 24–59, Erice, International school of mathematical physics held in Erice (Springer, Berlin, Heidelberg, 1978)
C.M. Ho, R.J. Scherrer, Cosmological particle decays at finite temperature. Phys. Rev. D 92(2), 025019 (2015)
I. Joseph, A. Kapusta, FiniteTemperature Field Theory (Cambridge University Press, Cambridge, 1989)
Augustin Nieto, Evaluating sums over the Matsubara frequencies. Comput. Phys. Commun. 92(1), 54–64 (1995)
J. Schwinger, Brownian motion of a quantum oscillator. J. Math. Phys. 4(1), 407–432 (1961)
T.S. Evans, New time contour for equilibrium realtime thermal field theories. Phys. Rev. D 47, 10 (1993)
A.F. Kemper, B. Moritz, J.K. Freericks, T.P. Devereaux, Theoretical description of highorder harmonic generation in solids. New J. Phys. 15, 2 (2013)
T. Nishikawa, O. Morimatsu, Y. Hidaka, Thermal sunset diagram for scalar field theories. Phys. Rev. D 68(7), 076002 (2003)
R.V. Kadison, J.R. Ringrose, Fundamentals of the theory of operator algebra, I, volume 1. Academic Press Inc., 111 Fifth Avenue, New York, pp. 10003 (1983)
E.J. Levinson, D.H. Boal, Selfenergy corrections to fermions in the presence of a thermal background. Phys. Rev. D 31(12), 3280–3284 (1985)
A. Czarnecki, M. Kamionkowski, S.K. Lee, K. Melnikov, Chargedparticle decay at finite temperature. Phys. Rev. D 85, 2 (2012)
E. Braaten, A. Nieto, Effective field theory approach to hightemperature thermodynamics. Phys. Rev. D 51(12), 6990–7006 (1995)
J. Frenkel, A.V. Saa, J.C. Taylor, Pressure in thermal scalar field theory to threeloop order. Phys. Rev. D 46(8), 3670–3673 (1992)
R. Parwani, H. Singh, Pressure of hot \(g^2\phi ^4\) theory at order \(g^5\). Phys. Rev. D 51(8), 4518–4524 (1995)
J.O. Andersen, L.T. Kyllingstad, L.E. Leganger, Pressure to order \(g^8\log g\) of massless \(\phi ^4\) theory at weak coupling. JHEP 2009, 8 (2009)
A. Gynther, M. Laine, Y. Schröder, C. Torrero, A. Vourinen, Fourloop pressure of massless \(o(n)\) scalar field theory. JHEP 4, 2007 (2007)
J.O. Andersen, E. Braaten, M. Strickland, Hardthermalloop resummation of the free energy of a hot gluon plasma. Phys. Rev. Lett. 83(11), 2139–2142 (1999)
E. Braaten, R.D. Pisarski, Soft amplitudes in hot gauge theories: a general analysis. Nucl. Phys. B 337(3), 569–634 (1990)
P.B. Arnold, C. Zhai, Threeloop free energy for pure gauge qcd. Phys. Rev. D 50(12), 7603–7623 (1994)
J.A. Minahan, 8.323: QFT1 lecture notes. Lecture notes in QFT, MIT (2011)
A.J. Buras. Weak Hamiltonian, CP violation and rare decays. In Probing the standard model of particle interactions. Proceedings, summer school in theoretical physics, NATO Advanced Study Institute, 68th session, Les Houches, France, July 28September 5, 1997. Pt. 1, 2, volume 1, pages 281–539, Les Houches. NATO Advanced Study Institute, Elsevier Science B.V (1998)
L.M. Brown, R.P. Feynman, Radiative corrections to Compton scattering. Phys. Rev. 85(2), 231–244 (1952)
G. Passarino, M.J.G. Veltman, Oneloop corrections for \(e^+e^\) annihilation into \(\mu ^+\mu ^\) in the Weinberg model. Nucl. Phys. B 160(1), 151–207 (1979)
A.I. Davydychev, A simple formula for reducing Feynman diagrams to scalar integrals. Phys. Lett. B 263(1), 107–111 (1991)
D.B. Melrose, Reduction of Feynman diagrams. Il Nuovo Cimento 40(1), 181–213 (1965)
Acknowledgements
We acknowledge inspiring discussions with Hugo Serôdio, Johan Bijnens and Malin Sjdahl. The work has been performed in the framework of COST Action CA15213 “Theory of hot matter and relativistic heavyion collisions” (THOR). R.P. is supported in part by the Swedish Research Council grants, contract numbers 62120134287 and 201605996, as well as by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 668679). T.L. is supported by Knut and Alice Wallenberg foundation, contract no 2017.0036.
Funding
Open access funding provided by Lund University.
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by Laura Tolos.
Appendices
Appendix A: An example of bubble cancellations in the imaginarytime formalism
In this section, the argument for why Z[0] contains the sum of all closed diagrams, i.e. diagrams with no external legs is presented. Further, it is shown pictorially why the cumulant expansion of W[0] only contains fully connected bubbles.
1.1 Appendix A.1: Bubbles
With no source, no external fields can be created. The sum of all closed diagrams (bubbles) are therefore given by the generating functional with the source j set to zero.
Here, \(\kappa \) has explicitly been extracted from the interactionterm \(S_I\) of the action to visualise the order of expansion in the perturbation series. To each order in \(\kappa \) it is then possible to calculate the contribution to Z[0] from the vacuum bubbles by computing
1.2 Appendix A.2: Cumulant expansion
Recall the generating functional for the connected Green’s functions, \(W[j] = \log Z[j]\) and the cumulant expansion from Sec. 2.4.2. Using these expressions, one arrives at an alternative expansion for the generating functional at \(j=0\) as
This is the defining relation for the connected averages \(\langle (S_I)^n \rangle _\text {con}\). By combination of Eq. (A.1) and Eq. (A.3), the following identification can be made
This can be considered as a perturbative series expansion in \(\kappa \) of the logarithm on the left hand side. The expression on the righthand side contains, apart from powers of \(\kappa \), the newly defined connected averages, the cumulants \(\langle (S_I)^n \rangle _\text {con}\). These are defined explicitly order by order in \(\kappa \) through the full expansion of the sums in the above expression and in order to obtain the explicit expansion of Eq. (A.4) below, one may exponentiate the left and righthand sides and expand the resulting exponential and the two sums to identify the cumulants to each order in \(\kappa \):
The cumulants can now be collected order by order in \(\kappa \) as:
Order  Cumulant definition 

\(\kappa ^0\)  \(1 \equiv 1\) 
\(\kappa ^1\)  \(\langle S_I \rangle _0 \equiv \langle S_I \rangle _\text {con}\) 
\(\kappa ^2\)  \(\langle (S_I)^2 \rangle _0 \equiv \langle (S_I)^2 \rangle _\text {con} + \langle S_I \rangle _\text {con}^2\) 
\(\kappa ^3\)  \(\langle (S_I)^3 \rangle _0 \equiv \langle (S_I)^3 \rangle _\text {con} + 3 \langle S_I \rangle _\text {con} \langle (S_I)^2 \rangle _\text {con} + \langle S_I \rangle _\text {con}^3\) 
\(\vdots \)  \(\vdots \) 
The zerothorder relation provides nothing but a trivial identity. By making use of the relation at order \(\kappa \), the secondorder relation can be solved for the squarecumulant \(\langle (S_I)^2 \rangle _\text {con}\) in terms of ordinary averages:
This relation together with the definition at order \(\kappa \) further gives the third order cubed connected term as
Collecting
Order  Cumulant definition 

\(\kappa ^0\)  \(1 \equiv 1\) 
\(\kappa ^1\)  \(\langle S_I \rangle _\text {con} =\langle S_I \rangle _0\) 
\(\kappa ^2\)  \(\langle (S_I)^2 \rangle _\text {con} = \langle (S_I)^2 \rangle _0  \langle S_I \rangle _0^2\) 
\(\kappa ^3\)  \(\langle (S_I)^3 \rangle _\text {con} = \langle (S_I)^3 \rangle _0  3 \langle S_I \rangle _0 \langle (S_I)^2 \rangle _0 + 2 \langle S_I \rangle _0^3\) 
\(\vdots \)  \(\vdots \) 
With this scheme, \(\langle (S_I)^n \rangle _\text {con}\) to any order n may be defined iteratively. By explicit evaluation of the cumulants at the first four orders (up to \(\kappa ^3\)), their diagrammatical interpretation is clear.
Order \(\kappa ^0\): Trivial case: \(1 \equiv 1\).
Order \(\kappa ^1\): This calculation may straightforwardly be performed.
Order \(\kappa ^2\): At second order, calculations are here shown explicitly.
Order \(\kappa ^3\): At third order in \(\kappa \), the calculation is more cumbersome but not any less straight forward.
Diagrammatically this expression is
It is clear from the diagrammatic calculations above that the cumulants precisely correspond to the fully connected diagrams at each order in \(\kappa \). This can be shown in general to any order, see for example Refs. [1, 13]. Note further that the remaining factorials cancel with the numerical factor of the expansion of the exponential as to give the correct symmetry factors dividing each diagram.
Appendix B: An example of a thermal loop calculation in the realtime formalism
In this section, the evaluation of a thermal loop integral is provided as a reference problem. The scenario considered is that of Sect. 7 and the diagram is generated by the interaction term
The explicit integrals of interest are
1.1 Appendix B.1: \(iI_\text {SS}^{(2)}\)integral
The loop integral in Eq. (B.2) is the crossterm of the nonthermal part from each of the two propagators:
This integral is recognised from the zerotemperature theory and includes no reference to the thermal parameter \(\beta \). One may in this instance appreciate the separation of the thermal part from the zerotemperature contribution since it is immediately realised that the calculation reduces to the zerotemperature result if \(T\rightarrow 0\). In this limit, the above integral is the only remaining term since the others contain the thermal distribution function which vanishes when \(T \rightarrow 0\).
The evaluation of this integral is a standard procedure from zerotemperature QFT and the result may be found in any textbook on loop calculations (e.g. [1]). Therefore, the calculation of this integral will not be repeated in great detail here. It is enough to say that the procedure involves the Feynman parametrisation of the two fractions followed by a shift of the integration momentum k. By a subsequent Wick rotation of the energy component according to
the integral may be recast into a Euclidean integral on polar form, generally in D dimensions as
Generally, integrals on this form may be UV divergent at \(D=4\) and a scheme for regulating such divergences must be deployed. A common approach is dimensional regularisation techniques in which the dimensionality of the above momentum integral is taken to be \(D = 42\delta \) with \(\delta \in (0,1)\). The innermost momentum integral(s) may be solved in the general case by shifting to polar coördinates and solving the angular and radial contributions separately. The well known result is
where the \(\varGamma \)function parameterises the divergence. Poles arise for \(D \rightarrow 2m, m \in \mathbbm {N}\) such that arguments of the \(\varGamma \)functions becomes negative whole numbers. The divergence may be explicitly extracted as
\(\gamma _E\) is the EulerMascheroni constant.
The general formula above for momentum integrals is an important relation since many loop integrals may be expressed on this form. Hence, there is seldom any need for explicit momentum integration^{Footnote 16}.
In the case of interest to the evaluation of the integral \(iI_{\text {SS}}^{(2)}\), \(n = 2\) s.t.
It is crucial to note an important consequence of modifying the dimension \(D = 4 \rightarrow 4  2\delta \) when regulating the loop integral. The action have dimension 0 when the Lagrangian density is integrated over spacetime. When modifying the dimensionality s.t. the spacetime integration over the Lagrangian \(\int \! {\hbox {d}}^4 x \rightarrow \int \! {\hbox {d}}^{D} x\), this requires the missing dimensionality to be accounted for elsewhere. In the interaction term, it is common practice to extend the dimensionality of the coupling constant in order to absorb extra dimensions. This is usually done s.t. \(\kappa \rightarrow \kappa \bar{\mu }^{p}\) where \(\bar{\mu }\) has dimension 1 and is defined as the renormalisation point to some power p. The exponent p is determined through bookkeeping of dimensionality.
Introducing the renormalised coupling constant \(\kappa \bar{\mu }^p\) squared as a prefactor to the above integral, one may move the resulting \({\big (\bar{\mu }^2\big )}^\epsilon \) into the logarithm. The final step is to evaluate the resulting integral in x over the logarithm
which is proportional to the following general form
In the case of interest, the constants in x are
The integral may be evaluated through factorisation of the polynomial as
All but the last four terms resulting from integration simplify trivially s.t.
The final functional form of this expression depends on the sign of \(b^2  4ac\) which is deter4mined by the sign and magnitude of \(p^2\). Disregarding corrections to order \(\epsilon \), this difference is positive when:
and negative when
In the negative case, when \(p^2\) lies between the difference squared and the sum squared of the two masses, a further simplification can be made.
where the three quantities \(x_\pm \) and C was defined as
In the positive case, \(p^2\) is either above or below a certain threshold value: \(p^2 < (m_1  m_2)^2 \,\, \vee \,\, p^2 > (m_1 + m_2)^2\). Each of the four logarithmic terms may acquirer a negative argument thus making it undefined (complex). A convenient approach is the identification, and further expansion, of, the following square roots:
An identity for the principal value of complex logarithms may be used in order to expand the logarithms as:
Collecting the above results, the full nonthermal part of the loop integral of interest to this subsection may be written down:
The last term is
1.2 Appendix B.2: Isolating the imaginary part
In the case of decay rates, the main point of interest is the imaginary part of the loop diagram. In the above case of the nonthermal part, it proved to be a decent amount of work for essentially a contribution of \(2\pi i\) and it should be noted that a quicker calculation is viable in order to extract the imaginary part of the loop.
After dimensional regularisation in the previous subsection, the logarithm to be integrated over the Feynman parametrisation may be written on explicit complex form using the identity preceding Eq. (B.23). Thus, the imaginary part of the loop may be extracted at an early stage:
Recall the definition of a, b (Eq. (B.13)) and note that after expansion, the \(i\epsilon \) contribution has been taken into account. Therefore, c now reduces to \(c'\) with
The only remaining task is to identify for what regions of \(p^2\) the roots of the polynomial in the \(\varTheta \)function fall inside the integration domain and for which regions the entire interval is to be considered. Factorise
To exhaust the possibilities of sign combinations, the values of the roots has been tabulated, see Tab. 1.
In the case in the table, one may show that
In the case in the table, one may show that \(\varLambda _+ \le \varLambda _\) and
Hence, only for \(p^2 \ge (m_1 + m_2)^2\) is the polynomial negative inside the region of integration giving a finite imaginary component. Both roots \(\varLambda _, \varLambda _+ \in [0,1]\), ordered as \(\varLambda _+ \le \varLambda _\). The result of the previous subsection for the imaginary part is the swiftly recovered:
1.3 Appendix B.3: \(iF_\text {SS}\)integral(s)
This section provides an example calculation of the socalled mixed firstorder contribution to the thermal selfenergy. The mixed integrals are due to the crossterms of the two propagators that mix the thermal and nonthermal propagator terms.
Since the two integrals differ in structure only by a substitution of variables (\(q = p  k\)) the second integral has simply been denoted as \((1 \leftrightarrow 2)\). This notation implies a naïve interchange of indices 1 and 2. The full mixed contribution is
The integrals are evaluated through the SochockiPlemelj theorem^{Footnote 17} which requires a smooth closed simple curve C in the complex plane. Splitting the Feynman propagator and the \(\delta \)functions results is
Thus, the real and imaginary parts of the loop has been separated and are written out below for clarity.
The real part:
and the imaginary part of the mixed contribution to the loop:
1.3.1 Appendix B.3.1: The imaginary part
This subsection considers the imaginary part of the \(iF_\text {SS}^{(2)}\)integral on the previous page (Eq. (B.40)). \(k_0\) may immediately be integrated and each of the four resulting \(\delta \)functions specify an energy domain together with the physical condition \(p_0 > 0\).
Similarly
Note that no contributions can come from
since the energy domain is forbidden.
For simplicity, consider \(\mathbf{p} \) aligned with the zaxis. Then
and in polar coordinates
The limits \(k_+^{,',''}\), \(k_^{,',''}\) are given by restrictions from the \(\delta \)functions on \(\mathbf{k} \) listed above.
Now, the integral of interest may be recast on this polar form:
where the function \(f^{(rs)}(x)\) was defined as
with \(r, s = \pm 1\). Now, simplify the \(\delta \)function using
where the roots \(x_\text {root}\) are points \(x_0\) so that \(f^{(rs)}(x_0) = 0\). Solving for \(x_0\) gives
Contributions to the imaginary part may only come from regions of \(p^2\) when the \(\delta \)functions contribute, i.e. when \(x  x_0^{(r)} = 0\), \(x \in [1, 1]\). This restriction limits the integration interval of through
Plug in the roots \(x_0^{(r)}\) so that the inequalities become
The end points of the interval are of primary interest as to determine the limits of integration and one may consider specifically the values of that fulfill the equalities, labelled . Separately, the two equalities may then be squared and stated as
The four solutions are
These resulting limits on the polar integral for the imaginary part of \(iF^{(2)}(p; m_1, m_2) + (1 \leftrightarrow 2)\), indicated above as \(k_+^{,',''}\), \(k_^{,',''}\). The limits are \(p^2\)dependent and contributions may come from any of the three \(\delta \)functions in the integral over \(\cos {\theta }\). In Table 2, the different regions are presented.
The integration limits \(k_+^{,',''}\), \(k_^{,',''}\) must be positive in order to apply as limits for the polar coordinate and the modulus of the limits may be considered in order to express the primed limits in terms of the unprimed.
First consider \(p^2 \ge (m_2 + m_1)^2\):
Secondly consider \(0 \le p^2 \le (m_2  m_1)^2\). For \(m_2 > m_1\) Table 2 shows that \(k_\pm ' = k_\pm \) (the limit from the previous case). For \(m_2 < m_1\):
In the region where \(p^2 < 0\), two further cases in the mass hierarchy of \(m_2 > m_1\) exists. \(k_+\) is determined to be \(+\infty \) and
Finally, for \(m_2 < m_1\), \(k_' = k_+\) and \(k_'' = k_\). With the polar integration limits given by integration over \(\delta \big (f^{(rs)}(\cos (\theta ))\big )\) identified, mixed contributions may be evaluated.
1.3.2 Appendix B.3.2: \(p^2 \ge (m_2 + m_1)^2\):
Contributions to this region of momentum come only from \(\delta \big ( p_0  \omega _{2, k}  \omega _{1, pk} \big )\) giving integration limits on as shown in Table 2.
Note that the \(\delta \)function imposes the condition \(p_0  \omega _{2, k} = \omega _{1, pk}\). Hence
which may be recast and solved as
The final limits \(\omega _{2, k_\pm }\):
1.3.3 Appendix B.3.3: \((m_2  m_1)^2 \le p^2 \le (m_2 + m_1)^2\):
This region of \(p^2\) gets no contribution to the imaginary part of the loop.
1.3.4 Appendix B.3.4: \(0 \le p^2 \le (m_2  m_1)^2\):
The contribution to the loop in the momentum region \(0 \le p^2 \le (m_2  m_1)^2\) comes from either \(\delta \big (p_0  \omega _{2, k} + \omega _{1, pk} \big )\) with \(r=1\) or \(\delta \big (p_0 + \omega _{2, k}  \omega _{1, pk} \big )\) with with \(r=+1\), depending on the mass hierarchy in this region of \(p^2\). It turns out, however, that the final result is independent of the mass ordering:
Note that any explicit dependence on the polar angle (\(\theta \)) (e.g. resulting from any Lorentz structure of the numerator) would give a result dependent on the mass orderings.
1.3.5 Appendix B.3.5: \(p^2 < 0\):
Contributions to this region of momentum comes from the two \(\delta \)functions \(\delta \big (p_0  \omega _{2, k} + \omega _{1, pk} \big )\) and \(\delta \big (p_0 + \omega _{2, k}  \omega _{1, pk} \big )\). Consider initially \(m_2 > m_1\) with the following two possible cases:
The limits of integration will be different for the two cases.
The above expression holds also for the case \(m_2 < m_1\) because of the symmetry in the above result.
1.3.6 Appendix B.3.6: The real part
The real part of the mixed term in the bubble may be evaluated analytically up to a final integration. Utilise \(\delta \)functions over \(k_0\) and combine fractions of principal values to get
Again, taking \(\mathbf{p} \) in the direction of the zaxis, the denominators may be fully expanded and the inner integral(s) to be evaluated:
Define
and plug this into the integral for the real part we get
1.4 Appendix B.4: \(iF_\text {SS}^{(3)}\)integral
The fourth thermal integral of the loop is the product of the thermal terms from each of the propagators.
Note that the righthand side is purely imaginary. The fourth term above proportional to the integrand \(\delta (p_0 + \omega _{2, k} + \omega _{1, pk})\) may be discarded due to the physical condition \(p_0 \ge 0\).
1.4.1 Appendix B.4.1: \(p^2 \ge (m_2 + m_1)^2\):
Contributions come from the term containing \(\delta (p_0  \omega _{2, k}  \omega _{1, pk})\).
The \(\delta \)function provides an important inequality:
Hence, which is is expected due to the essential singularity at \(y = \beta p_0\). (If the range of integration included this point there would be no hope of convergence.)
Apply
in order to evaluate the integral:
1.4.2 Appendix B.4.2: \((m_2  m_1)^2 \le p^2 \le (m_2 + m_1)^2\):
None of the \(\delta \)functions contributes to the region of momentum where \((m_2  m_1)^2 \le p^2 \le (m_2 + m_1)^2\).
1.4.3 Appendix B.4.3: \(0 \le p^2 \le (m_2  m_1)^2\):
In the momentum region where \(0 \le p^2 \le (m_2  m_1)^2\), two cases must be considered depending on the hierarchy of the loop masses.
If \(m_2 > m_1\), the contribution come from \(\delta \big ( p_0  \omega _{2, k} + \omega _{1, pk} \big )\) while for \(m_2 < m_1\) the contribution come from \(\delta \big ( p_0 + \omega _{2, k}  \omega _{1, pk} \big )\). The integral becomes
For \(r=1\), the \(\delta \)function imposes the condition \(\beta p_0 \le y\). Hence the absolute value in the exponent may be replaced by an additional minus sign. The integral may then be solved using
as
Secondly, consider the case of \(r=+1\). In this case, one should take the relevant \(\delta \)function as \(\delta \big ( p_0 + \omega _{2, k}  \omega _{1, pk} \big )\), the condition imposed by this function is \(\beta p_0 + y > 0\). The integration proceed very similar as to the first case in this momentum region using:
Then
Note that the above result is identical to the case of \(m_2 > m_1\) with the heuristic change of sign \(p_0 \rightarrow p_0\).
1.4.4 Appendix B.4.4: \(p^2 \le 0\):
For the momentum region where \(p^2 \le 0\), contributions come from both \(\delta \big ( p_0  \omega _{2, k} + \omega _{1, pk} \big )\) and \(\delta \big ( p_0 + \omega _{2, k}  \omega _{1, pk} \big )\). The imposed limits of integration on are different in the two terms.
First consider a mass hierarchy of \(m_2 > m_1\). The limits on are different in the cases of \(1 + \frac{m_2^2  m_1^2}{p^2} > 0\) or \(1 + \frac{m_2^2  m_1^2}{p^2}{<}0\). The integral becomes
Integration results in
If instead \(m_2 < m_1\), note that the limits are the same as for the opposing mass hierarchy with \(1 + \frac{m_2^2  m_1^1}{p^2} > 0\) and hence, the integration result is identical.
1.5 Appendix B.5: Summary of the results
Collecting the results of the thermal loop integration presented in Sects. B.1–B.4 for all different momentum regions are presented in his subsection.
The nonthermal contribution comes from the term
Here, the last integral term is
with
The mixed thermalnonthermal integration gives the contributions
and
Here
The pure thermal contribution takes the following form:
This section presented, in detail, the type of integrals encountered in the evaluation of thermal loop diagrams by making use of the simplest possible loop of two scalar particles. It is clear from the result that the final expressions simplify further if the two loop masses are identical. Additional complications for the procedure of integration arise when the propagators carry Lorentz structure. It should be noted, however, that both such complications and loop divergences are introduced mainly through the nonthermal integration and, therefore, the thermal terms does provide any major increase in complexity.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Lundberg, T., Pasechnik, R. Thermal Field Theory in realtime formalism: concepts and applications for particle decays. Eur. Phys. J. A 57, 71 (2021). https://doi.org/10.1140/epja/s10050020002885
Received:
Accepted:
Published:
DOI: https://doi.org/10.1140/epja/s10050020002885