Abstract
In order to clarify the slag system of high Cr2O3 vanadium-titanium magnetite smelting in BF (blast furnace), the melting properties of slag samples prepared by analyticaly pure reagents were measured. By means of orthogonal test synthetic weighted score method, the optimal slag for high Cr2 O3 vanadium-titanium magnetite was obtained, which contained 10% MgO, 8% TiO2 and 15% Al2O3, with the binary basicity being 1.15. In addition, the effects of basicity, MgO, TiO2 and Al2O3 on slag melting properties were investigated by single factor test, and the results showed that, with increasing the basicity or TiO2 content, melting temperature (Tm) increased, whereas initial viscosity (η0) and highGtemperature viscosity (ηh) decreased. With increasing the MgO content, Tm decreased firstly and then increased. With increasing the Al2O3 content, Tm increased, and η0 and ηh decreased firstly and then increased.
Similar content being viewed by others
References
S. Y. Gou, Iron Steel Vanadium Titanium 30 (2009) No. 3, 8–9.
J. Y. Ma, Theory and Practice for Vanadium Titanomagnetite in BlastGfurnace Process, Metalurgical Industry Press, Beijing, 2000.
S. A. Krasikov, L. A. Maiorov, A. A. Ponomarenko, S. V. Zhidovinova, A. A. Sawinona, Steel in Translation 41 (2011) 752–755.
Y. Zhou, W. C. Jiang, B. S. Wang, J. Iron Steel Res. 5 (1985) No. 4, 445–450.
B. Jia, B. M. Qi, Iron Steel Vanadium Titanium 17 (1996) No. 4, 10–14.
Y. L. Su, L. J. Wu, C. Y. Song, Iron Steel Vanadium Titanium 23 (2002) No. 3, 9–16.
M. Y. Zhu, Metalurgy of Iron and Steel, Metalurgical Industry Press, Beijing, 2008.
P. G. Mo, J. S. Chen, Acta Metal. Sin. 4 (1964) No. 7, 363–374.
J. C. Tao, J. M. Wu, Systems Engineering-Theory & Parctice 21 (2001) No. 8, 43–48.
Orthogonal Test Group in Department of Mathematics Peking University, Method of Orthogonal Test, Scientific Popularization Press, Beijing, 1979.
X. G. Huang, Principles for Ferrous Metallurgy, third ed., Metallurgical Industry Press, Beijing, 2005.
Association of Steel Engineers in West Germany, Slag Atlas, J. Wang trans., Metalurgical Industry Press, Beijing, 1989.
W. C. Zhu, L. Ma, D. Q. Wang, J. Iron Steel Res. 21 (2009) No. 4, 59–63.
J. Z. Zhang, L. L. Shi, W. Z. Ao, J. Iron Steel Res. 22 (2010) No. 4, 16–19.
H. Y. He, Q. X. Wang, X. N. Zeng, J. Iron Steel Res. 18 (2006) No. 8, 11–13.
R. L. Kwang, S. Hideaki, Metal. Mater. Trans. B 25 (1994), 893–902.
S. Inaba, Y. Kimura, H. Shibata, H. Ohta, ISIJ Int. 44 (2004) 2120–2126.
Z. J. Zhao, E. Q. Ma, Y. J. Lian, Iron Steel Vanadium Titanium 23 (2002) No. 3, 36–38.
R. Ota, J. Fukunaga, N. Yoshida, J. Soc. Mater. Sci. 38 (1989) 8–13.
D. Z. He, Hunan Metalurgy (1994) No. 5, 13–18.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Foundation Item: Item Sponsored by National Natural Science Foundation of China (51090384); National High Technology Research and Development Program (863 Program) of China (2012AA062302, 2012AA062304); Fundamental Research Funds for the Central Universities of China (N110202001)
Rights and permissions
About this article
Cite this article
Zhang, Y., Tang, J., Chu, Ms. et al. Optimization of BF Slag for High Cr2O3 Vanadium-titanium Magnetite. J. Iron Steel Res. Int. 21, 144–150 (2014). https://doi.org/10.1016/S1006-706X(14)60023-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1016/S1006-706X(14)60023-6