Abstract
Research on platinum-group-metal (PGM)-based intermetallic compounds, which are candidates as high-temperature structural materials, is reviewed in this article. The research reviewed focuses on PGM-based L12 and B2 compounds. Alloys with a face-centered cubic and L12 or B2 phase are also reviewed.
Similar content being viewed by others
References
C.T. Sims, N.S. Stoloff, and W.C. Hargel, Superalloys II (New York: John Wiley & Sons, 1987).
R. Fleischer, J. Mat. Sci., 22, (1987), pp. 2281–2288.
R.L. Fleishcer and R.J. Zabala, Met. Trans. A, 21A, 10 (1990), pp. 2709–2715.
R.L. Fleischer et al., Met. Trans. A, 21A, 12 (1990), pp. 3063–3074.
R.L. Fleischer, R.D. Field, and C.L. Briant, Met. Trans. A, 22A, 1, (1991), pp. 129–137.
T.B. Massalski, editor, Binary Alloy Phase Diagram, vol. 3 (Materials Park, OH: ASM, 1992).
J.H. Westbrock, Trans. Metall. Soc. AIME, 209 (1957), pp. 898–904.
D.M. Wee and T. Suzuki, Trans. JIM, 20 (1979), pp. 634–646.
Y. Yamabe-Mitarai et al., Phil. Mag. Lett., 79 (9) (1999), pp. 673–682.
Y. Yamabe-Mitarai, Y. Ro, and S. Nakazawa, Intermetallics, 9 (2001), pp. 423–429.
Y. Yamabe et al., Scripta Mater., 35 (1996), pp. 211–216.
Y. Yamabe-Mitarai et al., Metall. Mater. Trans. A, 29A (1998), pp. 537–549.
Y. Yamabe-Mitarai et al., Scripta Mater., 40 (1) (1999), pp. 109–115.
Y. Yamabe-Mitarai et al., Intermetallics, 7 (1999), pp.49–58.
Y. Yamabe-Mitarai, S. Nakazawa, and H. Harada, Scripta Mater., 43 (2000), pp. 1059–1064.
Y. Yamabe-Mitarai, S. Nakazawa, and H. Harada, JSME Inter. Jour., A, 45 (1) (2002), pp. 2–7.
Y.F. Gu et al., Met. Mater. Trans. A, 30A (10) (1999), pp. 2629–2639.
Y.F. Gu, Y. Yamabe-Mitarai, and H. Harada, Iridium, ed. E.K. Ohriner et al. (Warrendale, PA: TMS, 2000), pp. 73–83.
Y.F. Gu et al., Scripta Mater., 46 (2002), pp. 137–142.
Y.F. Gu et al., JSME Inter. Jour., A, 45 (1) (2002), pp. 8–13.
Y. Yamabe-Mitarai and H. Harada, J. Alloys and Comp., 361 (2003), pp. 169–179.
Y. Yamabe-Mitarai, Y. Gu, and H. Harada, Metall. Mater. Trans. A, 34A (10) (2003), pp. 2207–2215.
Y. Yamabe-Mitarai et al., Defect and Diffusion Forum, vols. 188–190 (2001), pp. 171–184.
Y. Yamabe-Mitarai and H. Harada, J. Mater. Sci., 38 (2003), pp. 3955–3963.
Y.F. Gu et al., Metall. Mater. Trans. A, 34A (2003), pp. 2217–2221.
Y. Gu et al., Scripta Mater., 39 (6) (1998), pp. 723–728.
B.L. Mordike and C.A. Brookes, Platinum Metals Review, 4 (1960), pp. 94–99.
S.S. Hecker, D.L. Rohr, and D.F. Stein, Metall. Trans. A, 9A (1978), pp. 481–488.
C. Gandhi and M.F. Ashby, Acta Metall., 27 (1979), pp. 1565–1602.
P. Panfilov and A. Yermakov, Mechanisms and Mechanics of Fracture—Symposium in Honor of Prof. J.F. Knott, eds. W.O. Soboyejo, J.J. Lewandowski, and R.O. Ritchie (Warrendale, PA: TMS, 2002), pp. 229–334.
C.T. Liu, H. Inouye, and A.C. Schaffhauser, Metall. Trans. A, 12A (1981), pp. 993–1002.
A.N. Gubbi et al., Metall. Mater. Trans. A, 28 (1997), pp. 2049–2057.
X.H. Yu et al., Metall. Mater. Trans. A, 31A (2000), pp. 173–178.
X.H. Yu et al., Metall. Mater. Trans. A, 32A (2001), pp. 1347–1353.
C. Huang et al., Intermetalics, 10 (2002), pp. 839–902.
C. Huang et al., Mater. Lett., 57 (2003), pp. 3371–3376.
C. Huang et al., Intermetallics, 11 (2003), pp. 917–926.
C. Huang et al., Mater. Lett., 58 (2004), pp. 483–488.
S. Miura et al., Intermetallics, 8 (2000), pp. 785–791.
Y. Yamabe-Mitarai et al., Scripta Mater., 36 (4) (1997), pp. 393–398.
Y.F. Gu et al., Mater. Lett., 41 (1999), pp. 45–51.
Y.F. Gu et al., Metall. Mater. Trans. A, 33A (4) (2002), pp. 1281–1283.
D.M. Wee et al., Trans. JIM, 21 (1981), pp. 237–247.
D.M. Wee, D.P. Pope, and V. Vitek, Acta Metall., 32 (6) (1984), pp. 829–836.
B. Fisher et al., Platinum Metals Review, 43 (1) (1999), pp. 18–28.
R. Völkl et al., Glastech. Ber. Glass Sci. Technol., 74 (5) (2001), pp. 142–151.
G. Fairbank et al., Proc. of Fifth Charles Parsons Inter. Turbine Eng. Conf. (London: IOM3, 2000), CP-58.
G.B. Fairbank et al., Intermetallics, 8 (2000), pp. 1091–1100.
P.J. Meschter and W.L. Worrell, Metall. Trans. A, 8A (1977), pp. 503–509.
E.G. Kendall, C. Hays, and R.E. Swift, Trans. Metall. Soc. AIME, 221 (1961), pp. 445–451.
P.J. Hill et al., Mater. Sci. Eng., A301 (2001), pp. 167–179.
P.J. Hill, L.A. Cornish, and M.J. Witcomb, Proc. Int. Symp. on High Temperature Corrosion and Protection, ed. T. Narita, T. Maruyama, and S. Taniguchi (Tokyo: Iron and Steel Institute of Japan, 2000), pp. 185–190.
Y. Oya, Y. Mishima, and T. Suzuki, Z. Metalkde, 7 (1987), pp. 485–490.
T. Chattopadhyay and K. Schubert, J. Less-Common Met., 41 (1975), pp. 19–32.
P.J. Hill, Y. Yamabe-Mitarai, and I.M. Wolff, Scripta Mater., 44, (2001), pp. 43–48.
P. J. Hill et al., Structural Intermetallics 2001, ed. K.J. Hemker et al. (Warrendale, PA: TMS, 2002), pp. 527–533.
R. Völkl et al., submitted to Metall. Mater. Trans., A (May 2004).
P.J. Hill et al., Mater. Sci. Eng. A, 329A (2002), pp. 295–304.
H. Meininger and M. Ellner, J. Alloys Comp., 353 (2003), pp. 207–212.
T. Biggs et al., Plat. Metal. Rev., 47 (2003), pp. 142–156.
R. Völkl, D. Freund, and B. Fischer, J. Test. Eval., 31 (1) (2003), pp. 35–43.
R. Suss et al., Mater. Sci. and Eng., A338 (2002), pp. 131–141.
L.A. Cornish, B. Fischer, and R. Völkl, MRS Bulletin, 9 (2003), pp. 632–638.
S. Vorberg et al., JOM, in this issue.
R.L. Fleischer, R.D. Field, and C.L. Briant, Metall. Trans. A, 22A (2) (1991), pp. 403–414.
R.L. Fleischer, Acta Metall. Mater., 41 (3) (1993), pp. 863–869.
R.L. Fleischer, Acta Metall. Mater., 41 (4) (1993), pp. 1197–1205.
R.L. Fleischer and D.W. Mckee, Metall. Trans. A, 24A (3) (1993), pp. 759–763.
I.M. Wolff and G. Sauthoff, Metall. Trans. A, 27A (5) (1996), pp. 1395–1400.
I.M. Wolff and G. Sauthoff, Metall. Trans. A, 27A (9) (1996), pp. 2642–2651.
I.M. Wolff, Metall. Trans. A, 27A (11) (1996), pp. 3688–3699.
I.M. Wolff and G. Sauthoff, Acta Mater., 45 (7) (1997), pp. 2949–2969.
P.J. Hill, L.A. Cornish, and M.J. Witcomb, J. Alloys and Comp., 291 (1–2) (1999), pp. 130–144.
J. Hohls, P.J. Hill, and I.M. Wolff, Mater. Sci. and Eng., A329-331 (2002), pp. 504–512.
H. Hosoda et al., Mater. Trans. JIM, 38 (10) (1997), pp. 871–878.
H. Hosoda, S. Miyazaki, and S. Hanada, Intermetallics, 8 (2000), pp. 1081–1090.
A. Chiba et al., Intermetallics, 6 (1998), pp. 35–42.
Y. Yamabe-Mitarai et al., Scripta Mater., 48 (2003), pp. 565–570.
Y. Yamabe-Mitarai and H. Aoki, J. Alloys and Comp., 359 (2003), pp. 143–152.
Y. Yamabe-Mitarai and H. Aoki, Mater. Sci. Eng., A362 (2003), pp. 152–159.
Author information
Authors and Affiliations
Additional information
For more information, contact Y. Yamabe-Mitarai, National Institute for Material Science, High Temperature Materials Group, Sengen 1-2-1, Tsukuba, Ibaraki, 305-0047, Japan; +81-29-859-2525; fax +81-29-859-2501; e-mail mitarai.yoko@nims.go.jp.
Rights and permissions
About this article
Cite this article
Yamabe-Mitarai, Y., Gu, Y., Huang, C. et al. Platinum-group-metal-based intermetallics as high-temperature structural materials. JOM 56, 34–39 (2004). https://doi.org/10.1007/s11837-004-0198-z
Issue Date:
DOI: https://doi.org/10.1007/s11837-004-0198-z