Abstract
Bearings with rolling elements are often used as revolute joints to connect mechanical components. Due to their complex structure (clearance, multipoint contacts, defects, etc.), rolling element bearing joints are regarded as non-ideal revolute joints. In this paper, a method is proposed for modeling a non-ideal rolling ball bearing joint with localized defects in multibody systems. The kinematic constraints of an ideal revolute joint in traditional multibody dynamics theory are released, and functions of the non-ideal bearing joint are built using the interactions due to contact forces. Localized defects with a certain arc length and depth are established for the bearing raceway surfaces. An approach for contact detection between localized defects and rolling balls in bearing joint is suggested. Finally, a slider–crank mechanism containing a deep-groove ball bearing with localized defects is chosen as an example to demonstrate application of the methodology. The variation in the bearing joint equivalent reaction force, crank moment, slider acceleration, and acceleration–velocity portrait phase of the slider is used to illustrate the dynamic performance of the mechanism when the effect of bearing localized defects is considered.
Similar content being viewed by others
References
Patel, V.N., Tandon, N., Pandey, R.K.: A dynamic model for vibration studies of deep groove ball bearings considering single and multiple defects in races. J. Tribol. 132(4), 041101 (2010)
Patel, U.A., Upadhyay, S.H.: Effect of localized defect on the vibration behavior of cylindrical roller bearing-rotor system. In: Proceedings of International Conference on Advances in Tribology and Engineering Systems, pp. 297–319. Springer, Berlin (2014)
Patil, M.S., Mathew, J., Rajendrakumar, P.K., et al.: A theoretical model to predict the effect of localized defect on vibrations associated with ball bearing. Int. J. Mech. Sci. 52(9), 1193–1201 (2010)
Nakhaeinejad, M., Bryant, M.D.: Dynamic modeling of rolling element bearings with surface contact defects using bond graphs. J. Tribol. 133(1), 011102 (2011)
Tadina, M., Boltežar, M.: Improved model of a ball bearing for the simulation of vibration signals due to faults during run-up. J. Sound Vib. 330(17), 4287–4301 (2011)
Behzad, M., Mba, D., Bastami, A.R.: A new model for estimating vibrations generated in the defective rolling element bearings. J. Vib. Acoust. 133(4), 041011 (2011)
Marın, J.M., Rubio, H., Garcıa-Prada, J.C., et al.: Modeling and simulation of 5 and 11 DOF ball bearing system with localized defect. J. Test. Eval. 42, 34–49 (2014)
Pandya, D.H., Upadhyay, S.H., Harsha, S.P.: Nonlinear dynamic analysis of high speed bearings due to combined localized defects. J. Vib. Control (2013). doi:10.1177/1077546313483790
Pandya, D.H., Upadhyay, S.H., Harsha, S.P.: Nonlinear dynamic behavior of balanced rotor bearing system due to various localized defects. In: Proceedings of International Conference on Advances in Tribology and Engineering Systems, pp. 345–357. Springer, India (2014)
Kankar, P.K., Sharma, S.C., Harsha, S.P.: Vibration based performance prediction of ball bearings caused by localized defects. Nonlinear Dyn. 69(3), 847–875 (2012)
Kankar, P.K., Sharma, S.C., Harsha, S.P.: Vibration signature analysis of a high speed rotor supported on ball bearings due to localized defects. J. Vib. Control 19(12), 1833–1853 (2013)
Liu, J., Shao, Y., Lim, T.C.: Vibration analysis of ball bearings with a localized defect applying piecewise response function. Mech. Mach. Theory 56, 156–169 (2012)
Harsha, S.P., Sandeep, K., Prakash, R.: Non-linear dynamic behaviors of rolling element bearings due to surface waviness. J. Sound Vib. 272(3), 557–580 (2004)
Harsha, S.P., Kankar, P.K.: Stability analysis of a rotor bearing system due to surface waviness and number of balls. Int. J. Mech. Sci. 46(7), 1057–1081 (2004)
Changqing, B., Qingyu, X.: Dynamic model of ball bearings with internal clearance and waviness. J. Sound Vib. 294(1), 23–48 (2006)
Jang, G., Jeong, S.W.: Vibration analysis of a rotating system due to the effect of ball bearing waviness. J. Sound Vib. 269(3), 709–726 (2004)
Liqin, W., Li, C., Dezhi, Z., et al.: Nonlinear dynamics behaviors of a rotor roller bearing system with radial clearances and waviness considered. Chin. J. Aeronaut. 21(1), 86–96 (2008)
Kankar, P.K., Sharma, S.C., Harsha, S.P.: Nonlinear vibration signature analysis of a high speed rotor bearing system due to race imperfection. J. Comput. Nonlinear Dyn. 7(1), 011014 (2012)
Ravn, P.: A continuous analysis method for planar multibody systems with joint clearance. Multibody Syst. Dyn. 2(1), 1–24 (1998)
Flores, P., Ambrósio, J., Claro, J.C.P., et al.: Dynamic behaviour of planar rigid multi-body systems including revolute joints with clearance. Proc. Inst. Mech. Eng., Proc., Part K, J. Multi-Body Dyn. 221(2), 161–174 (2007)
Lankarani, H.M., Nikravesh, P.E.: A contact force model with hysteresis damping for impact analysis of multibody systems. J. Mech. Des. 112(3), 369–376 (1990)
Machado, M., Moreira, P., Flores, P., et al.: Compliant contact force models in multibody dynamics: Evolution of the Hertz contact theory. Mech. Mach. Theory 53, 99–121 (2012)
Koshy, C.S., Flores, P., Lankarani, H.M.: Study of the effect of contact force model on the dynamic response of mechanical systems with dry clearance joints: computational and experimental approaches. Nonlinear Dyn. 73(1–2), 325–338 (2013)
Muvengei, O., Kihiu, J., Ikua, B.: Numerical study of parametric effects on the dynamic response of planar multi-body systems with differently located frictionless revolute clearance joints. Mech. Mach. Theory 53, 30–49 (2012)
Muvengei, O., Kihiu, J., Ikua, B.: Dynamic analysis of planar multi-body systems with LuGre friction at differently located revolute clearance joints. Multibody Syst. Dyn. 28(4), 369–393 (2012)
Muvengei, O., Kihiu, J., Ikua, B.: Dynamic analysis of planar rigid-body mechanical systems with two-clearance revolute joints. Nonlinear Dyn. 73(1–2), 259–273 (2013)
Daniel, G.B., Cavalca, K.L.: Analysis of the dynamics of a slider–crank mechanism with hydrodynamic lubrication in the connecting rod–slider joint clearance. Mech. Mach. Theory 46(10), 1434–1452 (2011)
Azimi Olyaei, A., Ghazavi, M.R.: Stabilizing slider-crank mechanism with clearance joints. Mech. Mach. Theory 53, 17–29 (2012)
Tian, Q., Zhang, Y., Chen, L., et al.: Simulation of planar flexible multibody systems with clearance and lubricated revolute joints. Nonlinear Dyn. 60(4), 489–511 (2010)
Flores, P.: A parametric study on the dynamic response of planar multibody systems with multiple clearance joints. Nonlinear Dyn. 61(4), 633–653 (2010)
Flores, P., Lankarani, H.M.: Dynamic response of multibody systems with multiple clearance joints. J. Comput. Nonlinear Dyn. 7(3), 031003 (2012)
Flores, P., Koshy, C.S., Lankarani, H.M., et al.: Numerical and experimental investigation on multibody systems with revolute clearance joints. Nonlinear Dyn. 65(4), 383–398 (2011)
Bai, Z.F., Zhao, Y.: Dynamic behaviour analysis of planar mechanical systems with clearance in revolute joints using a new hybrid contact force model. Int. J. Mech. Sci. 54(1), 190–205 (2012)
Flores, P., Lankarani, H.M., Ambrósio, J., et al.: Modelling lubricated revolute joints in multibody mechanical systems. Proc. Inst. Mech. Eng., Proc., Part K, J. Multi-Body Dyn. 218(4), 183–190 (2004)
Machado, M., Costa, J., Seabra, E., et al.: The effect of the lubricated revolute joint parameters and hydrodynamic force models on the dynamic response of planar multibody systems. Nonlinear Dyn. 69(1–2), 635–654 (2012)
Erkaya, S.: Investigation of joint clearance effects on welding robot manipulators. Robot. Comput.-Integr. Manuf. 28(4), 449–457 (2012)
Xu, L.X., Li, Y.G.: Investigation of joint clearance effects on the dynamic performance of a planar 2-DOF pick-and-place parallel manipulator. Robot. Comput.-Integr. Manuf. 30(1), 62–73 (2014)
Flores, P., Ambrósio, J.: On the contact detection for contact-impact analysis in multibody systems. Multibody Syst. Dyn. 24(1), 103–122 (2010)
Lopes, D.S., Silva, M.T., Ambrósio, J.A., Flores, P.: A mathematical framework for contact detection between quadric and superquadric surfaces. Multibody Syst. Dyn. 24(3), 255–280 (2010)
Zhang, Z., Xu, L., Flores, P., et al.: A Kriging model for dynamics of mechanical systems with revolute joint clearances. J. Comput. Nonlinear Dyn. 9(3), 031013 (2014)
Xu, L.X., Yang, Y.H., Li, Y.G., et al.: Modeling and analysis of planar multibody systems containing deep groove ball bearing with clearance. Mech. Mach. Theory 56, 69–88 (2012)
Xu, L.X., Li, Y.G.: An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems. Nonlinear Dyn. 70(3), 2145–2161 (2012)
Xu, L.X., Li, Y.G.: Modeling of a deep-groove ball bearing with waviness defects in planar multibody system. Multibody Syst. Dyn. 33(3), 229–258 (2015)
Qi, Z., Wang, G., Zhang, Z.: Contact analysis of deep groove ball bearings in multibody systems. Multibody Syst. Dyn. 33(2), 115–141 (2015)
Acknowledgements
The authors would like to express their sincere thanks to the referees for their valuable suggestions. This project is supported by National Natural Science Foundation of China (Grant No. 51305300), National Basic Research Program of China (973 Program, Grant No. 2013CB035403), China Postdoctoral Science Foundation (Grant No. 2014M550141) and Tianjin Higher Educational Science and Technology Foundation Planning Project (Grant No. 20120407). These supports are gracefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Xu, L., Yang, Y. Modeling a non-ideal rolling ball bearing joint with localized defects in planar multibody systems. Multibody Syst Dyn 35, 409–426 (2015). https://doi.org/10.1007/s11044-015-9473-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11044-015-9473-8