The functional properties of composite textile materials based on polyamide threads for shoes depending on the drying method are investigated. The drying and heat treatment of the material has carried out using hot air under stepwise heating from 120 to 180°C, as well as under microwave radiation at the generator power and frequency of 600 W and 2450 MHz, respectively. The experimental studies have revealed that using microwave heating improves the physical and mechanical properties at a lower concentration of water dispersion of the polymer binder and faster heat treatment.
Similar content being viewed by others
References
K.E. Perepelkin, Reinforcing Fibers and Polymer-Fiber Composites [In Russian], St. Petersburg, Nauchnye osnovy i tekhnologii (2009).
Yu.M. Treshchalin, Composite Materials Based on Non-Woven Fabrics [In Russian], Moscow, Moscow State University named after M.V. Lomonosov (2007).
N.N. Yasinskaya, Heat Treatment During Formation of Composite Textile Materials: Monograph [In Russian], Vitebsk, VSTU (2019).
B.S. Pobedinskiy, Activation of Finishing Processes of Textile Materials Using Electromagnetic Wave Energy of HF, Microwave, and UV Ranges [In Russian], Ivanovo, ISC RAS (2000).
A.I. Olshanskii et al., Bulletin of Vitebsk State Technical University, 24, 55-65 (2013).
O.G. Tsirkina and A.L. Nikiforov, Izv. Universitov, Tekhnol. Tekst. Prom-sti [In Russian], No. 2, 85-90 (2013).
A.I. Olshanskii, V.I. Olshanskiy, and S.V. Zhernosek, Eng.- Phiz. jour. [In Russian], 86, No. 5, 1041-1048 (2014).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskie volokna, No.6, pp. 56–58, 2021
Rights and permissions
Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yasinskaya, N.N., Skobova, N.V. Effect of Drying and Heat Treatment on Functional Properties of Composite Textile Materials. Fibre Chem 53, 425–427 (2022). https://doi.org/10.1007/s10692-022-10320-7
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10692-022-10320-7