Abstract
Over the past decade, several acquisition functions have been proposed for kriging-based reliability analysis. Each of these acquisition functions can be used to identify an optimal sequence of samples to be included in the kriging model. However, no single acquisition function provides better performance over the others in all cases. Further, the best-performing acquisition function can change at different iterations over the sequential sampling process. To address this problem, this paper proposes a new acquisition function, namely expected uncertainty reduction (EUR), that serves as a meta-criterion to select the best sample from a set of optimal samples, each identified from a large number of candidate samples according to the criterion of an acquisition function. EUR does not rely on the local utility measure derived based on the kriging posterior of a performance function as most existing acquisition functions do. Instead, EUR directly quantifies the expected reduction of the uncertainty in the prediction of limit-state function by adding an optimal sample. The uncertainty reduction is quantified by sampling over the kriging posterior. In the proposed EUR-based sequential sampling process, a portfolio that consists of four acquisition functions is first employed to suggest four optimal samples at each iteration of sequential sampling. Each of these samples is optimal with respect to the selection criterion of the corresponding acquisition function. Then, EUR is employed as the meta-criterion to identify the best sample among those optimal samples. The results from two mathematical and one practical case studies show that (1) EUR-based sequential sampling can perform as well as or outperform the single use of any acquisition function in the portfolio, and (2) the best-performing acquisition function may change from one problem to another or even from one iteration to the next within a problem.
Similar content being viewed by others
References
Azzimonti D, Bect J, Chevalier C, Ginsbourger D (2016) Quantifying uncertainties on excursion sets under a Gaussian random field prior. SIAM/ASA J Uncertain Quantif 4(1):850–874
Barzegar V, Laflamme S, Downey A, Li M, Chao H (2020) Numerical evaluation of a novel passive variable friction damper for vibration mitigation. Eng Struct 220:110920
Bect J, Ginsbourger D, Li L, Picheny V, Vazquez E (2012) Sequential design of computer experiments for the estimation of a probability of failure. Stat Comput 22(3):773–793
Bernardo, José M. Expected information as expected utility. Ann Stat (1979): 686–690
Bichon BJ, Eldred MS, Swiler LP, Mahadevan S, McFarland JM (2008) Efficient global reliability analysis for nonlinear implicit performance functions. AIAA J 46(10):2459–2468
Blatman G, Sudret B (2011) Adaptive sparse polynomial chaos expansion based on least angle regression. J Comput Phys 230(6):2345–2367
Bourinet, J-M., François Deheeger, and Maurice Lemaire. Assessing small failure probabilities by combined subset simulation and support vector machines. Struct Saf 33, no. 6 (2011): 343–353
Brochu, Eric, Vlad M. Cora, and Nando De Freitas. A tutorial on Bayesian optimization of expensive cost functions, with application to active user modeling and hierarchical reinforcement learning. arXiv preprint arXiv:1012.2599 (2010)
Chevalier C, Bect J, Ginsbourger D, Vazquez E, Picheny V, Richet Y (2014) Fast parallel kriging-based stepwise uncertainty reduction with application to the identification of an excursion set. Technometrics 56(4):455–465
Kiureghian, Armen Der, and Mario De Stefano. Efficient algorithm for second-order reliability analysis. J Eng Mech 117, no. 12 (1991): 2904–2923
Downey A, Theisen C, Murphy H, Anastasi N, Laflamme S (2019) Cam-based passive variable friction device for structural control. Eng Struct 188:430–439
Du X, Guo J, Beeram H (2008) Sequential optimization and reliability assessment for multidisciplinary systems design. Struct Multidiscip Optim 35(2):117–130
Dubourg V, Sudret B, Deheeger F (2013) Metamodel-based importance sampling for structural reliability analysis. Probabilistic Engineering Mechanics 33:47–57
Echard B, Gayton N, Lemaire M (2011) AK-MCS: an active learning reliability method combining Kriging and Monte Carlo simulation. Struct Saf 33(2):145–154
Eldred, Michael, and John Burkardt. Comparison of non-intrusive polynomial chaos and stochastic collocation methods for uncertainty quantification. In 47th AIAA aerospace sciences meeting including the new horizons forum and aerospace exposition, p. 976. 2009
Haldar A, Mahadevan S (2000) Reliability assessment using stochastic finite element analysis. John Wiley & Sons
Hasofer AM, Lind NC (1974) Exact and invariant second-moment code format. J Eng Mech Div 100(1):111–121
Hu C, Youn BD (2011a) Adaptive-sparse polynomial chaos expansion for reliability analysis and design of complex engineering systems. Struct Multidiscip Optim 43(3):419–442
Hu C, Youn BD (2011b) An asymmetric dimension-adaptive tensor-product method for reliability analysis. Struct Saf 33(3):218–231
Hu C, Youn BD, Wang P (2019) Engineering design under uncertainty and health prognostics. Springer
Huan X, Marzouk YM (2013) Simulation-based optimal Bayesian experimental design for nonlinear systems. J Comput Phys 232(1):288–317
Jung Y, Cho H, Lee I (2019) MPP-based approximated DRM (ADRM) using simplified bivariate approximation with linear regression. Struct Multidiscip Optim 59(5):1761–1773
Li, Meng, Mohammadkazem Sadoughi, Chao Hu, Zhen Hu, Amin Toghi Eshghi, and Soobum Lee. High-dimensional reliability-based design optimization involving highly nonlinear constraints and computationally expensive simulations. J Mech Des 141, no. 5 (2019): 051402
Li M, Sadoughi M, Hu Z, Chao H (2020) A hybrid Gaussian process model for system reliability analysis. Reliab Eng Syst Saf 106816
Menz, Morgane, Christian Gogu, Sylvain Dubreuil, Nathalie Bartoli, and Jérôme Morio. Towards reliability analysis by adaptive sampling with multiple fidelity levels by the use of reduced basis methods. 2019
Oladyshkin S, Nowak W (2012) Data-driven uncertainty quantification using the arbitrary polynomial chaos expansion. Reliab Eng Syst Saf 106:179–190
Picheny V, Ginsbourger D, Roustant O, Haftka RT, Kim N-H (2010) Adaptive designs of experiments for accurate approximation of a target region. J Mech Des 132(7)
Press WH, Teukolsky SA, Flannery BP, Vetterling WT (1992) Numerical recipes in Fortran 77: volume 1, volume 1 of Fortran numerical recipes: the art of scientific computing. Cambridge university press
Rahman S, Heqin X (2004) A univariate dimension-reduction method for multi-dimensional integration in stochastic mechanics. Probab Eng Mech 19(4):393–408
Ranjan P, Bingham D, Michailidis G (2008) Sequential experiment design for contour estimation from complex computer codes. Technometrics 50(4):527–541
Rasmussen, Carl Edward. Gaussian processes in machine learning. In Summer School on Machine Learning, pp. 63–71. Springer, Berlin, Heidelberg, 2003
Sadoughi, Mohammad K., Chao Hu, Cameron A. MacKenzie, Amin Toghi Eshghi, and Soobum Lee. Sequential exploration-exploitation with dynamic trade-off for efficient reliability analysis of complex engineered systems. Struct Multidiscip Optim 57, no. 1 (2018a): 235–250
Sadoughi, Mohammad Kazem, Meng Li, Chao Hu, Cameron A. MacKenzie, Soobum Lee, and Amin Toghi Eshghi. A high-dimensional reliability analysis method for simulation-based design under uncertainty. J Mech Des 140, no. 7 (2018b)
Shahriari, Bobak, Ziyu Wang, Matthew W. Hoffman, Alexandre Bouchard-Côté, and Nando de Freitas. An entropy search portfolio for Bayesian optimization. arXiv preprint arXiv:1406.4625 (2014)
Shahriari, Bobak, Kevin Swersky, Ziyu Wang, Ryan P. Adams, and Nando de Freitas. Taking the human out of the loop: a review of bayesian optimization. Proceedings of the IEEE 104, no. 1 (2016): 148–175
Van Damme G (2020) Legendre Laguerre and Hermite - Gauss Quadrature (https://www.mathworks.com/matlabcentral/fileexchange/26737-legendre-laguerre-and-hermite-gauss-quadrature), MATLAB Central File Exchange. Retrieved August 19, 2020
Viana FAC, Haftka RT, Watson LT (2012) Sequential sampling for contour estimation with concurrent function evaluations. Struct Multidiscip Optim 45(4):615–618
Wang Z, Wang P (2014) A maximum confidence enhancement based sequential sampling scheme for simulation-based design. J Mech Des 136(2):021006
Xiong, Fenfen, Ying Xiong, Steven Greene, Wei Chen, and Shuxing Yang. A new sparse grid-based method for uncertainty propagation. In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 49026, pp. 1205–1215. 2009
Yang X, Liu Y, Zhang Y, Yue Z (2015) Probability and convex set hybrid reliability analysis based on active learning Kriging model. Appl Math Model 39(14):3954–3971
Yang X, Mi C, Deng D, Liu Y (2019) A system reliability analysis method combining active learning Kriging model with adaptive size of candidate points. Struct Multidiscip Optim 60(1):137–150
Yin M, Wang J, Sun Z (2019) An innovative DoE strategy of the kriging model for structural reliability analysis. Struct Multidiscip Optim 60(6):2493–2509
Youn BD, Xi Z, Wang P (2008) Eigenvector dimension reduction (EDR) method for sensitivity-free probability analysis. Struct Multidiscip Optim 37(1):13–28
Acknowledgements
This research was supported in part by the US National Science Foundation (NSF) Grant No. ECCS-1611333, and the NSF I/UCRC Center for e-Design. Any opinions, findings, or conclusions in this paper are those of the authors and do not necessarily reflect the views of the sponsors.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Replication of results
The authors intend to make the codes for replicating the results in case studies 1 and 2 publicly available upon the publication of this manuscript.
Additional information
Responsible Editor: Palaniappan Ramu
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Li, M., Shen, S., Barzegar, V. et al. Kriging-based reliability analysis considering predictive uncertainty reduction. Struct Multidisc Optim 63, 2721–2737 (2021). https://doi.org/10.1007/s00158-020-02831-w
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00158-020-02831-w