Abstract
This paper studies on size-dependent torsional dynamic response of non-circular graphene oxide powders (GOPs)-strengthened nanocomposite nanorods for the first time. The elliptical and triangular cross sections are chosen to be explored. Additionally, GOPs are distributed uniformly into polymeric matrix. In this paper, both Halpin–Tsai homogenization method and rule of mixture are implemented to estimate effective mechanical properties of nanocomposite structure. To take into account influence of small size, the constitutive relations of nanorods are developed on the basis of Eringen’s nonlocal elasticity theory (ENET). The principle of virtual work is applied to obtain the kinetic and kinematic relations of nanoscale rods. The nonlocal derived governing equations of non-circular GOPs-reinforced nanocomposite nanorods are solved by utilizing an analytical method with respect to different boundary conditions. To verify the accuracy of obtained outcomes, the results are compared to previous investigations and suitable agreement can be observable. The influences of various parameters such as both Clamped–Free (C–F) and Clamped–Clamped (C–C) boundary conditions, nonlocal parameter, inclined angles and geometrical ratio are explored and illustrated in the framework of several figures which can be observed in detail.
Similar content being viewed by others
References
Wattanasakulpong N, Ungbhakorn V (2013) Analytical solutions for bending, buckling and vibration responses of carbon nanotube-reinforced composite beams resting on elastic foundation. Comput Mater Sci 71:201–208
Heydarpour Y, Aghdam M, Malekzadeh P (2014) Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells. Compos Struct 117:187–200
Shen H-S (2014) Torsional postbuckling of nanotube-reinforced composite cylindrical shells in thermal environments. Compos Struct 116:477–488
Feng C, Kitipornchai S, Yang J (2017) Nonlinear free vibration of functionally graded polymer composite beams reinforced with graphene nanoplatelets (GPLs). Eng Struct 140:110–119
Kiani Y (2018) Torsional vibration of functionally graded carbon nanotube reinforced conical shells. Sci Eng Compos Mater 25(1):41–52
Ebrahimi F, Seyfi A, Dabbagh A, Tornabene F (2019) Wave dispersion characteristics of porous graphene platelet-reinforced composite shells. Struct Eng Mech 71(1):99–107
Qaderi S, Ebrahimi F, Seyfi A (2019) An investigation of the vibration of multi-layer composite beams reinforced by graphene platelets resting on two parameter viscoelastic foundation. SN Appl Sci 1(5):399
Keleshteri M, Asadi H, Aghdam M (2019) Nonlinear bending analysis of FG-CNTRC annular plates with variable thickness on elastic foundation. Thin-Walled Struct 135:453–462
Kabir H, Aghdam M (2019) A robust Bézier based solution for nonlinear vibration and post-buckling of random checkerboard graphene nano-platelets reinforced composite beams. Compos Struct 212:184–198
Ebrahimi F, Seyfi A, Dabbagh A (2019) Wave dispersion characteristics of agglomerated multi-scale hybrid nanocomposite beams. J Strain Anal Eng Des 54(4):276–289
Ebrahimi F, Seyfi A (2021) Wave propagation response of multi-scale hybrid nanocomposite shell by considering aggregation effect of CNTs. Mech Based Des Struct Mach 49(1):59–80.
Ebrahimi F, Seyfi A (2020) Wave propagation response of agglomerated multi-scale hybrid nanocomposite plates. Waves in Random and Complex Media 1–25.
Ebrahimi F, Seyfi A, Dabbagh A (2021) The effects of thermal loadings on wave propagation analysis of multi-scale hybrid composite beams. Waves in Random and Complex Media 1–24.
Ebrahimi F, Seyfi A (2021) Wave dispersion analysis of embedded MWCNTs-reinforced nanocomposite beams by considering waviness and agglomeration factors. Waves in Random and Complex Media 1–20.
Zhang Z, Li Y, Wu H, Zhang H, Wu H, Jiang S et al (2020) Mechanical analysis of functionally graded graphene oxide-reinforced composite beams based on the first-order shear deformation theory. Mech Adv Mater Struct 27(1):3–11
Khaniki HB, Ghayesh MH (2020) On the dynamics of axially functionally graded CNT strengthened deformable beams. Eur Phys J Plus 135(6):415
Sofiyev AH, Tornabene F, Dimitri R, Kuruoglu N (2020) Buckling behavior of FG-CNT reinforced composite conical shells subjected to a combined loading. Nanomaterials 10(3):419
Mirjavadi SS, Forsat M, Yahya YZ, Barati MR, Jayasimha AN, Khan I (2020) Finite element based post-buckling analysis of refined graphene oxide reinforced concrete beams with geometrical imperfection. Comput Concr 25(4):283–291
Civalek O, Jalaei MH (2020) Buckling of carbon nanotube (CNT)-reinforced composite skew plates by the discrete singular convolution method. Acta Mech 231(6):2565–2587
Ebrahimi F, Nouraei M, Seyfi A (2020) Wave dispersion characteristics of thermally excited graphene oxide powder-reinforced nanocomposite plates. Waves in Random and Complex Media 1–29
Msekh MA, Cuong N, Zi G, Areias P, Zhuang X, Rabczuk T (2018) Fracture properties prediction of clay/epoxy nanocomposites with interphase zones using a phase field model. Eng Fract Mech 188:287–299
Eringen AC (1972) Linear theory of nonlocal elasticity and dispersion of plane waves. Int J Eng Sci 10(5):425–435
Zhu X, Li L (2017) Longitudinal and torsional vibrations of size-dependent rods via nonlocal integral elasticity. Int J Mech Sci 133:639–650
Tuna M, Kirca M (2017) Bending, buckling and free vibration analysis of Euler-Bernoulli nanobeams using Eringen’s nonlocal integral model via finite element method. Compos Struct 179:269–284
Ouakad HM, El-Borgi S, Mousavi SM, Friswell MI (2018) Static and dynamic response of CNT nanobeam using nonlocal strain and velocity gradient theory. Appl Math Model 62:207–222
Ebrahimi F, Dehghan M, Seyfi A (2019) Eringen’s nonlocal elasticity theory for wave propagation analysis of magneto-electro-elastic nanotubes. Advances in Nano Research 7(1):1
Glabisz W, Jarczewska K, Holubowski R (2019) Stability of Timoshenko beams with frequency and initial stress dependent nonlocal parameters. Archives of Civil and Mechanical Engineering 19:1116–1126
Li Q, Wu D, Gao W, Tin-Loi F, Liu Z, Cheng J. Static bending and free vibration of organic solar cell resting on Winkler-Pasternak elastic foundation through the modified strain gradient theory. European Journal of Mechanics-A/Solids. 2019;78:103852.
Ebrahimi F, Seyfi A, Dabbagh A (2019) Dispersion of waves in FG porous nanoscale plates based on NSGT in thermal environment. Advances in nano research 7(5):325–335
Ebrahimi F, Seyfi A, Dabbagh A (2019) A novel porosity-dependent homogenization procedure for wave dispersion in nonlocal strain gradient inhomogeneous nanobeams. The European Physical Journal Plus 134(5):226
Darban H, Luciano R, Caporale A, Fabbrocino F. Higher modes of buckling in shear deformable nanobeams. International Journal of Engineering Science. 2020;154:103338.
Arda M (2021) Axial dynamics of functionally graded Rayleigh-Bishop nanorods. Microsyst Technol 27(1):269–282
Vu-Bac N, Rafiee R, Zhuang X, Lahmer T, Rabczuk T (2015) Uncertainty quantification for multiscale modeling of polymer nanocomposites with correlated parameters. Compos B Eng 68:446–464
Hamdia KM, Silani M, Zhuang X, He P, Rabczuk T (2017) Stochastic analysis of the fracture toughness of polymeric nanoparticle composites using polynomial chaos expansions. Int J Fract 206(2):215–227
Hamdia KM, Ghasemi H, Zhuang X, Alajlan N, Rabczuk T (2018) Sensitivity and uncertainty analysis for flexoelectric nanostructures. Comput Methods Appl Mech Eng 337:95–109
Budarapu PR, Gracie R, Yang S-W, Zhuang X, Rabczuk T (2014) Efficient coarse graining in multiscale modeling of fracture. Theoret Appl Fract Mech 69:126–143
Talebi H, Silani M, Bordas SP, Kerfriden P, Rabczuk T (2014) A computational library for multiscale modeling of material failure. Comput Mech 53(5):1047–1071
Eringen AC (1984) Plane waves in nonlocal micropolar elasticity. Int J Eng Sci 22(8–10):1113–1121
Samaniego E, Anitescu C, Goswami S, Nguyen-Thanh VM, Guo H, Hamdia K et al (2020) An energy approach to the solution of partial differential equations in computational mechanics via machine learning: Concepts, implementation and applications. Comput Methods Appl Mech Eng 362:112790
Anitescu C, Atroshchenko E, Alajlan N, Rabczuk T (2019) Artificial neural network methods for the solution of second order boundary value problems. Comput Mater Contin 59(1):345–359
Guo H, Zhuang X, Rabczuk T (2021) A deep collocation method for the bending analysis of Kirchhoff plate. arXiv preprint arXiv:210202617
Khosravi F, Hosseini SA, Hamidi BA (2020) On torsional vibrations of triangular nanowire. Thin-Walled Struct 148:106591
Khosravi F, Hosseini SA, Hamidi BA, Dimitri R, Tornabene F (2020) Nonlocal torsional vibration of elliptical nanorods with different boundary conditions. Vibration 3(3):189–203
Acknowledgements
This investigation received no specific grant from any funding agency in the public, commercial, or not-for-profit sectors.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ebrahimi, F., Seyfi, A. & Teimouri, A. Torsional vibration analysis of scale-dependent non-circular graphene oxide powder-strengthened nanocomposite nanorods. Engineering with Computers 39, 173–184 (2023). https://doi.org/10.1007/s00366-021-01528-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-021-01528-y