Abstract
The most frequent volcanic eruptions are of low-intensity and small magnitude. They produce abundant ash-sized (< 2 mm) clasts, which are too small to establish quantitative links between magmatic processes and eruptive dynamics using classic approaches. This inhibits our ability to study the past behaviour of frequently erupting volcanoes, essential to predict their future activity and mitigate their impact. The Palizzi unit (10–13th century, Vulcano, Italy) includes a prototype sequence of ash deposits resulting from prolonged Vulcanian eruptions punctuated by those of two larger sub-Plinian events. We apply Hierarchical Clustering to chemical analyses of clinopyroxene collected along the stratigraphy to decipher magma dynamics during this eruptive period. We identify periods of magma input and we link deep magmatic processes to eruptive dynamics, also showing that our approach can be used to connect magma and eruptive dynamics in any volcanic sequence. This is essential to track the processes occurring during frequent eruptions and to identify the build-up to larger explosive events.
Similar content being viewed by others
Introduction
Fine-grained fallout tephra beds, resulting from low-intensity, magmatic explosive eruptions, are complex to characterize by petrological and textural analysis with respect to lapilli-sized material or lava samples. In addition to the difficulty of separate juvenile glass and crystals from non-juvenile components, the bulk magma composition is complicated to obtain due to the selective atmospheric transport of glass and crystals of different density1,2. For this reasons, bulk-rock chemistry of the ash deposits can vary with distance from the vent and more in general it does not necessarily represent the juvenile magma that fed the eruption1,2. The deposits of long-lasting, low-intensity eruptions (VEI 1–2) are the most frequent (1–10 yrs) and/or the most easily accessible in the eruptive record3,4,5,6. Therefore, the difficulty we encounter in characterising these deposits jeopardises our capacity to trace the relationships between magmatic processes and eruptive dynamics over the eruptive history of any volcanic system. In addition, long-lasting, low-intensity eruptions cause a continuous threat to communities living close to active volcanoes (e.g. Sakurajima volcano, Japan7) and following their temporal evolution is essential to determine whether the style of activity might change in future. However, their investigation with classic approaches would require the collection of samples in proximal areas (coarse material), which either relies on special equipment such as Remote-Control Vehicles or could be otherwise extremely risky (e.g. 2021 eruption of Cumbre Vieja eruption, La Palma, Spain8). Some ash deposits do not even have their coarse counterpart in proximal area, in which case, petrological analysis would be just impossible.
The analysis of zoning patterns of crystals, both in explosive and effusive products, provides insights into the time scales and processes that occur within the plumbing system, such as the evolution and variation of the melt chemistry and changes of the intensive parameters during crystal growth9,10. In recent years, the development of machine learning algorithms has greatly improved the analysis of a large number of petrologic data expanding our ability to identify links between magmatic processes, eruptive style and monitoring signals11,12,13,14,15,16,17,18,19,20,21,22,23,24,25. In this work, we develop a workflow based on unsupervised machine learning (Hierarchical Clustering; HC) that allows to investigate the magma dynamics associated with explosive sequences dominated by fine-grained material. We focus on the explosive products of the Palizzi Eruptive Unit (PEU) of La Fossa volcano26 (Vulcano Island, Italy; Figs. 1a–c), as an emblematic example of this kind of sequences. The PEU (10–13th century)27 represents one of the most important eruptive periods of La Fossa volcano and is characterized by variable eruptive dynamics that produced a large spectrum of tephra-fallout deposits26. Given the fine grain-size of the available outcrops, the PEU pristine and complete sequence has remained poorly explored from a petrologic point of view. The tephra sequence has the undeniable value of providing an orderly temporal complete succession of eruptive materials, being located in the downwind sector with respect to the vent28 and on a topographic relative high which protects it from erosive factors (Figs. 1a and S1; Methods and Supplementary Information).
In this study, we use major element analyses collected using an electron probe microanalyzer (EPMA) along core-to-rim transects in clinopyroxene (cpx) crystals to perform HC and reduce the cpx profiles to a sequence of clusters17 and objectively quantify chemical and textural variations along the PEU sequence. Cpx is stable over a wide range of P–T–H2O and thus is prone to capture the variation of physical and chemical conditions within the volcanic plumbing system over time29,30,31,32,33,34,35,36,37. We then couple HC with cpx-melt thermo-barometry and use clusters distribution to identify petrological proxies for deciphering the complex relationship between cpx chemical zoning and magma recharge events, possibly related to the build-up phase to larger explosive eruptions. Using this approach, we show that it is possible to associate the eruptive dynamics, inferred along the stratigraphy of ash-dominated volcanic deposits, to magmatic processes occurring at depths.
Results and discussion
The PEU explosive products
The fine-grained PEU tephra sequence has been interpreted as the result of persistent Vulcanian explosive activity and was accumulated at about 1 km from the vent26. Tephra deposits mostly consist of ash layers (Pal A and Pal C26, further divided in this work in the sub-units Pal C1, Pal C2 and Pal C3) and punctuated by two lapilli layers related to sub-Plinian eruptions (Pal B and Pal D)26,27,28,38,39,40 (Figs. 1b, c and S1; Methods and Supplementary Information). Ash layers of Pal A and Pal C1 are plane-parallel suggesting they were accumulated in rapid succession by namely fallout activity; Pal C2 and Pal C3 contain an increasing number of intra-sequence erosive unconformities, suggesting Vulcanian explosions with longer repose intervals, as also highlighted by the occurrence of two levels of reworked deposits in Pal C3. Pal B and Pal D are lapilli- to bomb-sized layers with constant, pluri-cm thickness from fallout activity (Figs. 1c and S1).
The petrographic inspection of the PEU ash layers (Pal A, Pal C1, Pal C2 and Pal C3) highlights the presence of five main categories of components: (i) juvenile vesiculated glass, light brown in colour, both transparent and opacified (Fig. 2a), (ii) fresh to altered lithic fragments and (iii) loose crystals, mostly euhedral to subhedral clinopyroxene, plagioclase and minor amount of olivine (Fig. 2b). The Pal B deposit consists of coarser-grained, white pumiceous lapilli and bombs bearing a limited amount of crystals (P.I. < 5 vol.%) set in a glassy groundmass38. Phenocrysts are, in order of abundance, plagioclase, sanidine, clinopyroxene and biotite. The Pal B pumice also hosts latitic enclaves constituted by phenocrysts of plagioclase and clinopyroxene in a dark microcrystalline matrix38. The Pal D fallout layer is constituted by highly vesiculated (~ 80 vol.%) and low porphyritic (P.I. < 5 vol.%) lapilli- to bomb-sized pumice clasts38,40. Millimetric phenocrysts of plagioclase, clinopyroxene, sanidine, biotite and olivine occur in a brown glassy groundmass38,40.
The overall small grainsize of the PEU ash layers did not allow bulk-rock analyses of the erupted tephra, and only the composition of the juvenile glass for the different levels was obtained. Instead, whole-rock data have been acquired for the largest intensity eruptions (Pal B and Pal D; Fig. 2c). Pal B pumice clasts are rhyolitic38 in composition (Fig. 2c) whereas those from Pal D are trachytic and show the highest K2O content of Vulcano products (K2O up to ~ 7.6 wt.%) and SiO2 contents comparable to other latitic and trachytic magmas emitted at La Fossa (~ 58 to 61 wt.% SiO2; Fig. 2c)38,40. The groundmass glasses of Pal B and Pal D show similar composition to the respective whole-rock analyses (Fig. 2c). Pal A, Pal C1, Pal C2 and Pal C3 show moderate variations in the juvenile glass composition from the base to the top of the sequence, with SiO2 in the range ~ 53.5 to 57.4 wt.% and 6–7.4 wt.% K2O. Only the juvenile glass of a specific Pal C1 sample (T-17), the first level after the emplacement of the Pal B rhyolite, covers a wider silica range spreading to silica-rich compositions (55.6–65.2 wt.% SiO2 and 6.4–6.9 K2O wt.%; Fig. 2c). Groundmass glasses compositions by EPMA are reported in the electronic Supplementary Material.
Textural and chemical features of clinopyroxene
Back-scattered electron (BSE) images of cpx crystals belonging to the PEU explosive products show different zoning patterns, ranging from un-zoned to weakly concentrically zoned (Fig. 3a). Oscillatory zoning is sometimes present, as testified by concentric bands with variable BSE intensity. In several cases, cores are characterized by lower BSE intensity, whereas sector zoning has not been observed. Inclusions of Ti-magnetite, apatite and glassy melt inclusions are commonly observed either in the cores or in concentrically zoned portions of the crystals (Fig. 3a). Although sector zoning is not revealed by BSE images, small compositional variations can occur between the basal {− 111} and prism {hk0} sectors. In order to minimize the effects of these intra-crystalline variations, cpx analyses were performed following core-to-rim profiles oriented from the center of the crystal, perpendicular to the c axis (note that all cpx crystals were exposed in section parallel to the c axis). Following this procedure, only prism sectors {hk0} are analysed, making the results of HC analysis and thermo-barometry self-consistent (see following sections and Methods). The composition of cpx from PEU covers a narrow range parallel to the augite-diopside joint (Wo41-49, En35-47, Fs6-19; Fig. 3b) and it is comparable with that of cpx occurring in shoshonitic and lati-trachytic magmas emitted in the last 1000 years at Vulcano41,42. The average chemistry of cpx is roughly constant along the entire stratigraphic sequence of PEU (Fig. 3b), which would suggest no significant variations of the pre-eruptive conditions over this eruptive period.
Cluster analysis of clinopyroxene
Hierarchical cluster analysis was conducted using log-transformed major elements chemical composition (e.g. ref.25; Methods) of cpx collected along the tephra sequence (Figs. 4a–c and S2), including the two main pumiceous deposits (data are reported in the electronic Supplementary Material). The clustering procedure allows to simplify the multidimensional complexity of cpx chemical profiles into a series of clusters17, with each data point assigned to a specific cluster (Figs. 5 and 6a). Additionally, this approach permits to easily quantify the relative proportions of clusters present throughout the investigated sequence (Figs. 6a, b and S3). The results show that the cpx of the PEU are best represented by four compositional clusters (Figs. 4a and S2; Methods). Plotting data with colours representing each cluster in the two principal components space show that the clusters identified by HC are well defined (Figs. 4b and S2; Methods).
Clusters 1 and 2 are similar for all elements, with the exception of Si and Mg that are slightly higher in cluster 1, and Al and Ti, slightly higher in cluster 2, respectively (Fig. 4c). Cluster 2 and subordinately Cluster 1 show the highest content of Ti and Al among all clusters. Cluster 3 shows an intermediate chemical composition between clusters 1 and 4 and has the highest Si content and the lowest concentration of Al, Ca and Cr. Cluster 4 shows the largest chemical differences with respect to the other three clusters being enriched in Si, Ca, Mg, Cr and having lower Fe and Na (Fig. 4c). It is worth noting that almost all the spots assigned to cluster 4 correspond to the low-intensity zones in BSE images, while it is more complex to identify relationships between the other clusters and textural features (Fig. 5).
Once identified the four clusters, it is possible to quantify their relative abundances; particularly, HC assigned the 56% of the total analytical spots to cluster 2, 33% to cluster 1, 6% to cluster 3 and 5% to cluster 4 (Fig. 6b). Cluster 1 is the most abundant at the base of the sequence (43%) and reaches its minimum in correspondence of Pal B (22%). Cluster 2 represents between 49 and 67% of the spots in all stratigraphic levels and reaches is minimum in correspondence to Pal D (28%; Fig. 6b). Cluster 3 is absent at the base of the sequence and always represents less than 7% of the analyses. The only exception is in Pal D where cluster 3 is more abundant and represents 32% of the spots. Cluster 4 is absent at the base of the sequence (base of Pal A) and reaches its maximum (9–11%) in the following levels (the top of Pal A and Pal B; Fig. 6b).
Each profile has been divided in three equal spatial portions (33% of the total length of the profile) to determine the distributions of clusters in different portions of the crystals, here defined as inner, intermediate and outer zones. In this respect, as we do not recalculate the relationships between the position of a specific zone and the relative volume of the zone, our approach serves to highlight relative temporal variation recorded by crystals that cannot be directly related to the volume of magma experiencing specific conditions. The relative abundance of the four clusters varies along the PEU stratigraphy as does their distribution between inner, intermediate and outer portions of cpx (Figs. 6c and S3). Cluster 1 and 2 are equally distributed in the three zones (Fig. 6c). Cluster 3 is slightly more abundant in inner (39%) and intermediate (34%) portions with respect to outer zones (27%) (Fig. 6c). Cluster 4 is most abundant in cpx inner portions (66%) with respect to intermediate (19%) and outer (15%) zones (Fig. 6c). Other interesting features are also observed when the total fractions of clusters are plotted along the stratigraphic sequence (Fig. 6b). To an increase of analyses relative to cluster 2 corresponds a decrease of the spots belonging to cluster 4. The distribution trend of cluster 1 is specular to that of cluster 2 (Fig. 6b). The same trends are observed when plotting the cluster fractions in the different crystal zones along the stratigraphy (Fig. S3).
Thermo-barometry of clinopyroxene clusters
Crystallization pressure and temperature have been determined using the cpx-melt thermo-barometer of ref.36 (Fig. 7), after checking the equilibrium condition between cpx and coexisting melt (Figs. S4 and S5 and Tab. S1; Methods). This thermo-barometric model is specific to alkaline-differentiated magmas and includes in the calibration dataset experiments performed with lati-trachytic products erupted at La Fossa volcano during the PEU36. All clusters have been paired with the average melt compositions of coeval shoshonitic and latitic magmas, while cluster 3 has been also paired with the trachytic composition of Pal D because it mainly occurs in cpx of this eruption (Figs. S4 and S5 and Tab. S1; see Methods for further explanation on cpx-melt equilibrium criteria). The H2O content required as input data for the thermo-barometer for the cpx-shoshonite pairs was varied between 0.3 and 0.6 wt.% (i.e. the H2O range in shoshonitic melt inclusions measured by ref.42). For cpx-latite pairs, H2O varied between 2.5 and 3.5 wt.% and between 1.5 and 2.5 wt.% for trachyte-cpx pairs (obtained through plagioclase-liquid hygrometry by refs.38,43 and H2O in melt inclusions by Raman spectroscopy40). We noticed that an increase in H2O content of 1 wt.% corresponds to a maximum decrease of temperature estimates of ~ 10 °C, which is lower than the uncertainty on temperature estimates (± 18 °C)36.
Crystallization temperature and pressure estimates for cpx crystals of clusters 1 and 2 latitic pairs are identical within the error, respectively 1014 ± 4 °C and 382 ± 31 MPa for cluster 1 and 1014 ± 5 °C and 386 ± 35 MPa for cluster 2. Cpx crystals of cluster 3 paired with a latitic composition show similar temperature and slightly lower pressure compared to the other clusters, respectively 1017 ± 5 °C and 351 ± 34 MPa; when paired with a trachytic composition, they show the lowest temperature and pressure ranges among all clusters, of 1010 ± 3 °C and 151 ± 23 MPa, respectively. Since cluster 3 mainly occurs in the trachytic products of Pal D and also given the equilibrium tests results (Figs. S4 and S5), we retain that cluster 3-trachytic melt pairs provide better estimates with respect to cluster 3-latite pairs. Finally, cpx crystals from cluster 4 paired with a latitic melt composition yielded temperature of 1033 ± 8 °C and pressure of 380 ± 48 MPa, whereas, coupled with a shoshonitic melt yielded temperature of 1024 ± 7 °C and pressure of 458 ± 48 MPa (Fig. 7).
In general, the inferred pressures for the cpx clusters-latite melt pairs agree with those inferred in previous works, based on cpx-melt thermobarometry and thermodynamic modelling38,44,45,46, for the shoshonitic to latitic reservoir (17–12 km) of La Fossa plumbing system, that has been active at least in the last 1000 years. Cpx crystals of cluster 4 coupled with shoshonitic melts (estimated pressure of 458 ± 48 MPa) suggest equilibration pressure within the shoshonitic reservoir inferred for the La Fossa-Vulcanello system at depths between 18 and 21 km through volatiles in melt and fluid inclusions in quartz xenoliths44,47,48,49. Finally, the pressure obtained for the cpx crystals of cluster 3 paired with a trachytic melt composition (151 ± 23 MPa), confirms the presence of a shallow storage region that fed the Pal D eruption as suggested through cpx-melt thermobarometry38. It should be noted that, with the exception of cluster 3-trachytic melt pairs, the range of estimated pressure and temperature falls within the error of the thermo-barometric models (18 °C and 115 MPa)36.
Petrological interpretation of clinopyroxene clusters
Compositional zoning of cpx is typically associated with crystallization kinetics that, in turn, can be related to the varying degree of undercooling50,51,52,53,54,55,56,57. Diffusion-controlled growth mechanism prevails with increasing degree of undercooling, yielding to incorporation of chemical species that are incompatible in the crystal structure31. In the case of cpx, enrichment in incompatible elements such as AlIV and Ti can be interpreted as the result of crystallization under regimes of high undercooling, resulting from cooling and degassing processes56. The chemical differences among the cpx clusters can be therefore associated with different regimes of undercooling experienced during the growth of cpx crystals and to magma dynamics within the plumbing system (Fig. S6).
In terms of chemical composition of the clusters, the majority of analyses belonging to cluster 2 shows higher concentration of AlIV and Ti with respect to other clusters (Fig. 4c). Excluding cluster 3 (which we discuss separately below), the concentration of AlIV and Ti overall decreases from cluster 2 to cluster 1, and from cluster 1 to cluster 4 (Fig. 4c). This latter cluster, on the counterpart, results enriched in Si, Mg and also Cr (Figs. 4c, 5, S6). Cluster 4, which mainly occurs in cpx inner zones (66%; Figs. 5, 6c), could be thus related to slower crystallization under lower regimes of undercooling. Importantly, the higher content in Cr observed in cpx crystals from this cluster could be interpreted as evidence of crystallization from a more mafic magma58. This agrees with thermo-barometric calculations showing that cluster 4 is associated with crystallization at higher temperature and pressure with respect to other clusters (Fig. 7). On the other hand, the chemistry and the small compositional differences of clusters 1 and 2 could be interpreted as the consequence of a more rapid growth under higher and variable regimes of undercooling, possibly resulting from decompression-induced degassing59 and reflecting different moments of near-equilibrium crystal growth.
Concerning cluster 3, we note that cpx belonging to this cluster are mostly concentrated in the Pal D eruption and, consistently, they show a compositional variability that is not apparently correlated to the variations described for the other clusters. Accordingly, thermo-barometric calculations for cluster 3-trachyte melt pairs suggest crystallization at lower temperature and pressure conditions (Fig. 7) that are typical of the trachytic magma of Pal D38.
Plumbing system processes during the PEU
In order to quantitatively explore the links between cpx chemistry and magma dynamics, we couple the HC analysis with the analysis of the total concentration variance of chemical elements (σ2tot) and the total fraction of cluster changes (TFCC; Fig. 8a) along the stratigraphy of PEU. σ2tot and TFCC together provide important proxies to trace magmatic processes at depth and are meant here as parameters to investigate the thermal homogenisation of the magma reservoir and the complexity of cpx chemical zoning, respectively, in response to magma recharge events.
The concentration variance (σ2) for a given chemical element, is calculated as ref.60:
where Ci is the concentration of the element i, µi the mean of the element i and N the number of analyses. We calculate the concentration variance for each major oxide (wt.%) in all cpx in each single level and sum it to obtain one value of concentration variance for each level (σ2tot) (Fig. 8a). We also quantify the complexity of chemical zoning in cpx using the TFCC. This is the number of times that along single profiles a change of cluster is recorded, calculated for all profiles of a specific level and normalised by the total number of analyses collected for each level (Fig. 8a).
While the average chemistry of cpx along the stratigraphy did not show any significant variation (Fig. 3b), several trends emerge when looking together at σ2tot, TFCC and the fraction of the most mafic cluster 4 (Fig. 8b). Firstly, our analysis highlights some repetitive patterns along the stratigraphy. The deposits of the two sub-Plinian eruptions in the sequence are those that record the highest values of σ2tot and relatively low values of TFCC. During the intermediate period of persistent vulcanian activity, σ2tot progressively decreases (Fig. 8a). The two sub-Plinian events also erupt cpx with the high fraction of the mafic cluster 4, which drops between the sub-Plinian eruptions (Fig. 8b). Our data shows that the two sub-Plinian events were preceded by a decrease of the TFCC of the cpx crystals, by an increase of σ2tot and high fraction of the mafic cluster 4 (Figs. 8a, b). We suggest that these trends recorded by the chemical and textural complexity of cpx crystals, resulted from the protracted input of mafic magma that leads to a diversification of melt chemistry and a thermal homogenisation within the plumbing system in the build-up phase to these two explosive events. The initial magmatic input thus played a major role in the triggering of Pal B rhyolitic eruption, which represents an abrupt change in the eruptive style of this part of the sequence. Petrologic, geochemical and petrographic features of Pal B rhyolite, such as the occurrence of magmatic enclaves and xenocrysts38 (see also cpx-melt equilibrium test in Fig. S5; Methods), strongly support the hypothesis that a mafic input and volatiles supply could have triggered an existing shallower rhyolitic reservoir resulting in an explosive eruption.
During the period of persistent vulcanian activity between the two sub-Plinian eruptions, the decrease of σ2tot suggests that after the Pal B eruption the input of magma from depth either stopped or decreased. Hence, persistent volcanic activity between Pal C and Pal D was not associated with significant input of deep magma but rather occurred while the shallow portion of the plumbing system was cooling down. In this respect, second boiling or the input of fluids from depth could have triggered the activity during this period61.
The top of the sequence is marked by the other sub-Plinian eruption of Pal D. The majority of cpx of Pal D belongs to cluster 3 that is associated to a more evolved magma (Figs. 2c, 6a, b and 7). This is in agreement with the marked different composition of the whole-rock and matrix glass data, mineral phases and melt inclusions of Pal D from the rest of the PEU38,40,62. In this respect, petrological and thermodynamic modelling (e.g. ref.62) suggests melt differentiation and interaction with a feldspar-rich crystal mush following protracted recharge events and thermal homogenisation of the reservoir to explain the geochemical features of Pal D products, such as the highest K2O and Ba contents of Vulcano Island magmas.
Coupling stratigraphy to magma dynamics
Magma dynamics recognized along the PEU fit well in the general working model of the plumbing system active at Vulcano Island in the last 1000 years, which is dominated by the activity of La Fossa (central system) and Vulcanello (peripheral system), the two main eruptive centres of La Fossa Caldera44 (Fig. 1a). Petrologic and chronostratigraphic works suggest that: i) these centres shared a common deep feeding system; ii) the explosive/effusive behaviour of La Fossa was modulated by the contemporaneous (or not) activity of Vulcanello. When both centres were active simultaneously, La Fossa produced mostly explosive activity, while degassed magma fed the Vulcanello effusive phases27,49,63. The entire PEU sequence was emplaced after a conspicuous effusive activity at Vulcanello, which occurred contemporaneously to Pal A27. The removal of degassed magma during Vulcanello and Pal A activity from the shallower portions of the plumbing system likely promoted the arrival of deep volatile-rich magma feeding the following activity of the PEU.
In the PEU sequence, magmatic input is thus recorded during Pal A, i.e. in the period leading to Pal B (Figs. 8a, b). The tephra sequence belonging to Pal A is in fact characterized by a continuous series of ash layers (Figs. 1c and S1), suggesting the absence of pauses in the eruptive activity. Following the Pal B sub-Plinian event, a decrease in the frequency of the eruptive activity occurs, as testified by a series of stratigraphic unconformities in the stratigraphic succession (Fig. 1c). A subtle magma recharge event could have been registered by the mid deposit of Pal C2 sub-unit (Figs. 8a, b). The progressive decline of magma input from depth is in accordance with the bedding characteristics from Pal C1 to Pal C2 and Pal C3. Bedding records a more intermittent behaviour of the vulcanian activity with time coupled with an increasing duration of eruption pauses (reworking beds interfingered to the primary ash beds in Pal C3, Figs. 1c and S1). The overall characteristics of deposits thus agree with a decline in volatile supply which is in turn in agreement with a decline of the magma supply. Finally, the Pal D eruption, emplaced at the top of the PEU, is characterized by another change in eruptive style following a lava flow and a quiescence period27 characterized by another recharge of the magmatic system.
Final remarks
The application of HC to cpx chemical profiles allowed to recognize at least two periods of relevant magmatic recharge in the PEU sequence. Magma dynamics was further supported with deposit features observed at the outcrop scale, showing that the response of the eruptive activity to changes in the plumbing system can be successfully explored by linking the eruption stratigraphy to detailed crystal data. The approach presented in this work is appropriate to understand similar volcanic successions worldwide constituted by fine-grained material otherwise difficult to investigate. Mineral phases hold crucial information on the magma dynamics and plumbing systems evolution during eruptions. Indeed, the link between magmatic processes occurring in plumbing systems and volcanic record is essential to forecast the future eruptive behaviour, and to correctly decipher monitoring signals at active volcanoes. Our results pose a quantitative base to assess the potential for long-lasting, low-magnitude volcanic activity to transition to larger explosive events. For instance, a decrease of TFCC associated with an increasing proportion of analysis associated to a mafic cluster signal the growth and thermal homogenisation of the subvolcanic reservoir, which could culminate in a significantly larger explosive event. These considerations stress the importance of our approach in unveiling chemical and textural trends that are otherwise hidden in the complexity of the multidimensional nature of mineral chemistry.
We argue that the approach presented in this study, in concert with other techniques such as near-vent lava flows and time series ash sampling (e.g. refs.64,65), can boosts the role of petrological monitoring in the long-term forecasting of the eruptive behaviour of volcanic systems undergoing persistent eruptive episodes.
Methods
Sampling and samples preparation
Giving the nature of the majority of the PEU products consisting of easily erodible ashes highly susceptible to reworking processes26, we studied and sampled the stratigraphic record of the entire explosive sequence (total thickness up to 4 m), in a 13 × 6 m and 2–7 m deep machine excavated trench located in the SE flank of La Fossa cone (Figs. 1a and S1; Supplementary Information; see also ref.27).
Clinopyroxene crystals were picked from eleven selected samples of the sequence of the PEU pyroclastic products (Fig. 1c). The samples have been selected in order to at least cover the base and the top of Pal A, Pal C1, Pal C2 and Pal C3. Samples were selected also from the two main pumiceous-lapilli fallout layers of Pal B and Pal D (one sample each). A total of 130 cpx crystals in the grain-size range of 500–1000 µm devoid of alteration and coated in juvenile glass were hand-picked under a stereomicroscope, embedded in resin epoxy mounts. Crystals were preferentially mounted in order to have the c crystallographic axis parallel to the section of the resin mount and polished in order to expose a section through the core of the crystal.
Scanning electron microscopy and electron microprobe analysis
Backscattered electron images (BSE) of cpx were obtained with a Quanta 450 Field Emission-Scanning Electron Microscope (FE-SEM) installed at the Center for Instrument Sharing at Università di Pisa (CISUP) using a 20 kV filament voltage, 10 mm working distance and 0.1 nA. Major elements core-to-rim profiles of cpx were collected using the electron probe microanalyzer (EPMA) JEOL JXA-8200 superprobe at the University of Geneva using 15 keV acceleration voltage, 10 nA beam current with a 1 µm beam size and 20 µm steps between two analytical spots in a profile. Chemical profiles were obtained systematically by analysing each crystal along core-to-rim transects, perpendicular to the c crystallographic axis and in sections as close as possible to the centre of the crystal, thus minimizing possible compositional variations related to sector zoning of cpx. A total of 130 profiles was collected for a total of 1986 analytical spots (mean analytical total of 100.05 wt.% ± 0.46, see data in the electronic Supplementary Material). The major element chemical composition of the juvenile glass fragments of the PEU samples (data in electronic Supplementary Material) was obtained using an JEOL JXA-8200 superprobe at the Dipartimento di Scienze della Terra at the Università di Milano (operative conditions were 15 kV accelerating voltage and 5 nA beam current). Glasses were analyzed with a defocused electron beam of 5 µm and counting time of 5 s on background and 15 s on peak. The following standards have been adopted for all EPMA analyses: jadeite (Si and Na), labradorite (Al and Ca), forsterite (Mg), andradite (Fe), rutile (Ti), orthoclase (K), barite (Ba), apatite (P) and spessartine (Mn). Na and K were analysed as first elements to minimize alkali loss.
Hierarchical cluster analysis
We first excluded cpx analyses (n. = 99) with a 3.96 ≤ sum of cations ≤ 4.04 (O = 6). The HC has been conducted on the remaining 1887 analyses using SiO2, TiO2, Al2O3, MnO, MgO, FeO, CaO, Na2O and excluding those elements with low abundances and high relative variance in cpx (e.g. K2O and Cr2O3). Clinopyroxene analyses were first log-transformed using the isometric log-ratio transformation (ilr)66, making them compatible into a Euclidean space (ilr vectors data are reported in electronic Supplementary Material):
where, x is a compositional analysis, i is a specific part, D is the number of parts (elements analyzed), and g(xi) is the geometric mean of the parts of x66. A log-transformation is necessary when dealing with compositional data that are subject to constant-sum closures (i.e., 100 wt.%) and that do not follow a normal distribution. Thus, the use of ilr-transformed data results in a more robust application of statistical analysis algorithms67. To prevent any dominance in the ilr data set of some variables having high log-ratio variances (e.g. low abundances and high relative variances) we normalized the log-transformed data set using the column medians and standard deviations following ref.25. The normalized ilr data were then used to perform HC following the procedure described in ref.17. HC was performed using the “cluster” library in the freeware software R68. To cluster the data, we used the Ward linkage method69. For a given dataset representable in a Euclidean space, the measurement of variability is calculated through the Euclidean distance of each data point from all the others69. Thus, pairs of clusters are gradually identified considering the smallest value of Euclidean distance and combined together. By default the exact number of clusters able to explain a specific problem is a priori unknown. In our case the exact number of clusters representative of the geochemical variance of cpx profiles can be grouped in as many clusters as the data points or in a single cluster containing all of them. Thus, we defined the appropriate number of clusters able at explaining our data through the visual technique of the Elbow Method, by minimizing the total within-cluster sum of square (WSS). The appropriate number of clusters was determined by looking at the total WSS as a function of the number of clusters and choosing a value so that adding another cluster does not significantly improve the total WSS. This visualization indicated that the best number of clusters was 4 (Fig. S2a).
We identified potential outliers in the four clusters following the approach described in ref.25 by calculating the Mahalanobis distance, the distance of a given data point and a distribution70. The Mahalanobis distance was calculated for each cluster and those values located at distances larger than 3 standard deviation from its centre were identified as outliers. A principal component analysis (PCA) was performed to reduce the dimensions of the ilr-transformed data. Results show that the clusters identified by HC are well defined by PCA. The cluster and relative outliers are better visualized by plotting the first (PCA1) and second (PCA2) principal components (Fig. S2b; data in electronic Supplementary Material). A total number of 160 points were recognized as outliers (Fig. S2c) and not employed in our study, bringing to 1727 analytical spots the number of clustered data used in this work.
An R script, including all the above illustrated steps to perform HC with the user’s own data, is provided as electronic Supplementary Material.
Clinopyroxene-melt equilibrium
In order to determine the range of temperature and pressure of cpx crystallization, the cpx-melt equilibrium models of refs.32,71,72 were used to define equilibrium cpx-melt pairs. Clinopyroxene analyses from the four compositional clusters have been combined with the mean composition of the mafic-intermediate magmas erupted at Vulcano in the same time span of the PEU (i.e. La Fossa-Vulcanello system44,49,63; Table S1). Since one of the main problems occurring in the study of fine ash volcanic layers is the lack of whole-rock data that could be assumed as representative of the erupted magma, the cpx analyses have been combined with the mean of whole-rock compositions of Vulcanello shoshonites (clusters 1, 2, 3, 4) and La Fossa latites (clusters 1, 2, 3, 4) and trachytes (only cluster 3) (Table S1). This choice is dictated by the fact that: (i) petrographic observation suggests that the main mineral assemblage of the ash layers (clinopyroxene + plagioclase + olivine) is consistent with that of latitic and shoshonitic magmas of the La Fossa plumbing system; (ii) the composition of the juvenile glass fragments of the PEU shows good correspondence with the residual melt of shoshonitic to latitic Vulcano magmas38,41,42,44,46,49.
To verify the chemical equilibrium between the four cpx clusters and melt compositions, the test for equilibrium based on the Fe–Mg exchange coefficient (KdFe-Mgcpx-liq) with an equilibrium range of 0.28 ± 0.0871 (Fig. S4a) and the equation of ref.72 to calculate the Mg# of the melt in equilibrium with each cpx (Fig. S4b), have been considered. Additionally, we used the equilibrium test of ref.32, based on the difference between measured and predicted diopside + hedenbergite cpx components (∆DiHd), assuming in equilibrium cpx-melt pairs with a ∆DiHd < 0.134 (Fig. S5).
In the equilibrium tests, all clusters have been alternately paired with the whole-rock mean compositions of shoshonites (Vulcanello 1 formation, data from49,62) and latites (AD 1888–1890 eruption, Pietre Cotte latitic enclaves, data from38,44,46,73) (Table S1). Additionally, cluster 3 has been also paired with the mean whole-rock composition of Pal D trachyte (data from38,46) (Table S1). This latter choice is dictated by the fact that cluster 3 predominantly occurs in cpx found in the Pal D trachytic eruption. The test for equilibrium based on the KdFe-Mgcpx-liq (ref. 71) (Fig. S4a) shows that all the clusters are in equilibrium with latitic melts except cluster 4 that is in closer equilibrium with a shoshonitic composition. The cluster 3 is also in large part in equilibrium with a trachytic melt. The Mg# of the melt in equilibrium with cpx obtained with the equation of ref.72 (Fig. S4b) highlights that cluster 4 is characterized by a wider range of Mg# compared to the other three clusters, being mostly in equilibrium with the shoshonitic melt. Instead, clusters 1, 2 and 3 show a narrower range of Mg#, being thus in equilibrium with lati-trachytic melts. However, it is worth noticing that mafic intermediate magmas erupted at Vulcano in the last 1000 years show similar and partially overlapping values of Mg# (Fig. S4).
The equilibrium test of ref.32 shows that all the clusters are in equilibrium with shoshonitic to latitic (clusters 1, 2, 3 and 4) and trachytic (only cluster 3) compositions showing always a ∆DiHd < 0.1 (Fig. S5). In particular, clusters 1 and 2 are in closer equilibrium with a latitic melt having ∆DiHd = 0.007 ± 0.05 and ∆DiHd = 0.014 ± 0.07 respectively. The same clusters, paired with a shoshonitic melt, result still in equilibrium but show slightly higher ∆DiHd of 0.033 ± 0.07 and 0.023 ± 0.07, respectively. Cluster 4 shows a slightly smaller value (∆DiHd = 0.013 ± 0.010) if paired with a shoshonitic melt with respect to a latitic composition (∆DiHd of 0.015 ± 0.012) (Fig. S5). The cpx-melt equilibrium test for cluster 3 yields decreasing ∆DiHd from shoshonite (∆DiHd of 0.043 ± 0.011) to latite (∆DiHd of 0.009 ± 0.020) and trachyte (∆DiHd of 0.008 ± 0.007), resulting in closer equilibrium with a trachytic composition (Fig. SS5). The analyses of the cpx belonging to the rhyolitic Pal B pumice, if paired with a rhyolitic composition get out of the equilibrium range having a ∆DiHd > 1, thus confirming that cpx occurring in the Pal B pumices are xenocrysts belonging to magmas of intermediate composition (see also ref.38).
Data availability
The data collected for this study and associated R script are available in the electronic Supplementary Material.
References
Wolff, J. A. The effect of explosive eruption processes on geochemical patterns within pyroclastic deposits. J. Volcanol. Geotherm. Res. 26, 189–201 (1985).
Cashmann, K. & Rust, A. Introduction: part 2: volcanic ash: generation and spatial variations. In Volcanic Ash: Hazard Observation (eds Mackie, S. et al.) 5–22 (Elsevier Inc., 2016).
Davidson, J. & De Silva, S. Composite volcanoes. Encyclopedia Volcanoes 1, 663–681 (2000).
Cioni, R., D’Oriano, C. & Bertagnini, A. Fingerprinting ash deposits of small scale eruptions by their physical and textural features. J. Volcanol. Geotherm. Res. 177, 277–287 (2008).
Németh, K., Cronin, S. J., Stewart, R. B. & Charley, D. Intra-and extra-caldera volcaniclastic facies and geomorphic characteristics of a frequently active mafic Island–arc Volcano, Ambrym Island, Vanuatu. Sediment. Geol. 220, 256–270 (2009).
D’Oriano, C., Cioni, R., Bertagnini, A., Andronico, D. & Cole, P. D. Dynamics of ash-dominated eruptions at Vesuvius: The post-512 AD AS1a event. Bull. Volcanol. 73, 699–715 (2011).
Yamanoi, Y., Takeuchi, S., Okumura, S., Nakashima, S. & Yokoyama, T. Color measurements of volcanic ash deposits from three different styles of summit activity at Sakurajima volcano, Japan: Conduit processes recorded in color of volcanic ash. J. Volcanol. Geotherm. Res. 178, 81–93 (2008).
Longpré, M. A. Reactivation of cumbre vieja Volcano. Science 374, 1197–1198 (2021).
Costa, F., Shea, T. & Ubide, T. Diffusion chronometry and the timescales of magmatic processes. Nat. Rev. Earth Environ. 1, 201–214 (2020).
Petrone, C. M., Mangler, M. F. Elemental Diffusion Chronostratigraphy: Time-Integrated Insights Into the Dynamics of Plumbing Systems. In: Masotta, M., Beier, C., Mollo, S. (Eds) Crustal Magmatic System Evolution. Geophys. Monogr. Ser. 177–193 (2021).
Wallace, G. S. & Bergantz, G. W. Wavelet-based correlation (WBC) of zoned crystal populations and magma mixing. Earth Planet. Sci. Lett. 202, 133–145 (2002).
Kahl, M., Chakraborty, S., Costa, F. & Pompilio, M. Dynamic plumbing system beneath volcanoes revealed by kinetic modeling, and the connection to monitoring data: An example from Mt. Etna. Earth Planet. Sci. Lett. 308, 11–22 (2011).
Cheng, L., Costa, F. & Carniel, R. Unraveling the presence of multiple plagioclase populations and identification of representative two-dimensional sections using a statistical and numerical approach. Am. Mineral. 102, 1894–1905 (2017).
Cheng, L., Costa, F. & Bergantz, G. Linking fluid dynamics and olivine crystal scale zoning during simulated magma intrusion. Contrib. Mineral. Petr. 175, 53 (2020).
Cheng, L. & Costa, F. Statistical analysis of crystal populations and links to volcano deformation for more robust estimates of magma replenishment volumes. Geology 47, 1171–1175 (2019).
Probst, L. C. et al. A cross correlation method for chemical profiles in minerals, with an application to zircons of the Kilgore Tuff (USA). Contrib. Mineral. Petr. 173, 23 (2018).
Caricchi, L. et al. A data driven approach to investigate the chemical variability of Clinopyroxenes From the 2014–2015 Holuhraun-Bárdarbunga Eruption (Iceland). Front. Earth Sci. 8, 18 (2020).
Itano, K., Ueki, K., Iizuka, T. & Kuwatani, T. Geochemical discrimination of monazite source rock based on machine learning techniques and multinomial logistic regression analysis. Geosciences 10, 63 (2020).
Petrelli, M. & Perugini, D. Solving petrological problems through machine learning: the study case of tectonic discrimination using geochemical and isotopic data. Contrib. Mineral. Petr. 171, 81 (2016).
Petrelli, M., Bizzarri, R., Morgavi, D., Baldanza, A. & Perugini, D. Combining machine learning techniques, microanalyses and large geochemical datasets for tephrochronological studies in complex volcanic areas: New age constraints for the Pleistocene magmatism of central Italy. Quat. Geochronol. 40, 33–44 (2017).
Petrelli, M., Caricchi, L., Perugini, D. Machine learning thermo‐barometry: Application to clinopyroxene-bearing magmas. J. Geophys. 125: e2020JB020130.
Ueki, K., Kuwatani, T., Okamoto, A., Akaho, S. & Iwamori, H. Thermodynamic modeling of hydrous-melt–olivine equilibrium using exhaustive variable selection. Phys. Earth Planet. Inter. 300, 106430 (2020).
Higgins, O., Sheldrake, T. & Caricchi, L. Quantitative chemical mapping of plagioclase as a tool for the interpretation of volcanic stratigraphy: An example from Saint Kitts, Lesser Antilles. Bull. Volcanol. 83, 1–15 (2021).
Cortés, J. A., Palma, J. L. & Wilson, M. Deciphering magma mixing: The application of cluster analysis to the mineral chemistry of crystal populations. J. Volcanol. Geotherm. Res. 165, 163–188 (2007).
Boschetty, F. O. et al. Insights into magma storage beneath a frequently erupting arc Volcano (Villarrica, Chile) from unsupervised machine learning analysis of mineral compositions. Geochem. Geophys. Geosystems. 23, e2022GC010333 (2022).
Di Traglia, F. et al. Growth and erosion: The volcanic geology and morphological evolution of La Fossa (Island of Vulcano, Southern Italy) in the last 1000 years. Geomorphology 194, 94–107 (2013).
Malaguti, A. B., Rosi, M., Pistolesi, M., Speranza, F. & Menzies, M. The contribution of palaeomagnetism, tephrochronology and radiocarbon dating to refine the last 1100 years of eruptive activity at Vulcano (Italy). Bull. Volcanol. 84, 1–19 (2022).
Biass, S. et al. Probabilistic evaluation of the physical impact of future tephra fallout events for the Island of Vulcano. Italy. Bull. Volcanol. 78, 37 (2016).
Armienti, P., Tonarini, S., Innocenti, F. & D’ Orazio, M. Mount Etna pyroxene as tracer of petrogenetic processes and dynamics of the feeding system. Geol. Soc. Am. Spec. 418, 265 (2007).
Armienti, P., Perinelli, C. & Putirka, K. D. A new model to estimate deep-level magma ascent rates, with applications to Mt. Etna (Sicily, Italy). J. Petrol. 54, 795–813 (2013).
Mollo, S., Del Gaudio, P., Ventura, G., Iezzi, G. & Scarlato, P. Dependence of clinopyroxene composition on cooling rate in basaltic magmas: Implications for thermobarometry. Lithos 118, 302–312 (2010).
Mollo, S., Putirka, K., Misiti, V., Soligo, M. & Scarlato, P. A new test for equilibrium based on clinopyroxene–melt pairs: Clues on the solidification temperatures of Etnean alkaline melts at post-eruptive conditions. Chem. Geol. 352, 92–100 (2013).
Mollo, S., Blundy, J. D., Iezzi, G., Scarlato, P. & Langone, A. The partitioning of trace elements between clinopyroxene and trachybasaltic melt during rapid cooling and crystal growth. Contrib. Mineral. Petr. 166, 1633–1654 (2013).
Mollo, S. & Masotta, M. Optimizing pre-eruptive temperature estimates in thermally and chemically zoned magma chambers. Chem. Geol. 368, 97–103 (2014).
Giacomoni, P. P., Coltorti, M., Bryce, J. G., Fahnestock, M. F. & Guitreau, M. Mt. Etna plumbing system revealed by combined textural, compositional, and thermobarometric studies in clinopyroxenes. Contrib. Mineral. Petr. 171, 34 (2016).
Masotta, M., Mollo, S., Freda, C., Gaeta, M. & Moore, G. Clinopyroxene–liquid thermometers and barometers specific to alkaline differentiated magmas. Contrib. Mineral. Petr. 166, 1545–1561 (2013).
Neave, D. A. & Putirka, K. D. A new clinopyroxene-liquid barometer, and implications for magma storage pressures under Icelandic rift zones. Am. Mineral. 102, 777–794 (2017).
Costa, S. et al. Magma evolution at La Fossa Volcano (Vulcano Island, Italy) in the last 1000 years: Evidence from eruptive products and temperature gradient experiments. Contrib. Mineral. Petr. 175, 31 (2020).
Selva, J. et al. Multiple hazards and paths to eruptions: A review of the volcanic system of Volcano (Aeolian Islands, Italy). Earth-Sci. Rev. 207, 103186 (2020).
Fulignati, P. et al. Magmatic sulfide immiscibility at an active magmatic-hydrothermal system: The case of La Fossa (Vulcano, Italy). J. Volcanol. Geotherm. Res. 358, 45–57 (2018).
De Fino, M., La Volpe, L. & Piccarreta, G. Role of magma mixing during the recent activity of La Fossa di Vulcano (Aeolian Islands, Italy). J. Volcanol. Geotherm. Res. 48, 385–398 (1991).
Gioncada, A. et al. A study of melt inclusions at Vulcano (Aeolian Islands, Italy): Insights on the primitive magmas and on the volcanic feeding system. Bull. Volcanol. 60, 286–306 (1998).
Masotta, M. & Mollo, S. A new plagioclase-liquid hygrometer specific to trachytic systems. Minerals 9, 375 (2019).
De Astis, G. et al. Geology, volcanic history and petrology of Vulcano (central Aeolian archipelago). Geol. Soc. Lond. Mem. 37, 281–349 (2013).
Mandarano, M. et al. Revealing magma degassing below closed-conduit active volcanoes: Geochemical features of volcanic rocks versus fumarolic fluids at Vulcano (Aeolian Islands, Italy). Lithos 248, 272–287 (2016).
Nicotra, E. et al. Timescales of pre-eruptive magmatic processes at Vulcano (Aeolian Islands, Italy) during the last 1000 years. Lithos 316, 347–365 (2018).
Zanon, V., Frezzotti, M. L. & Peccerillo, A. Magmatic feeding system and crustal magma accumulation beneath Vulcano Island (Italy): Evidence from CO2 fluid inclusions in quartz xenoliths. J. Geophys. Res. 108, 2298 (2003).
Peccerillo, A., Frezzotti, M. L., De Astis, G. & Ventura, G. Modeling the magma plumbing system of Vulcano (Aeolian Islands, Italy) by integrated fluid-inclusion geobarometry, petrology, and geophysics. Geology 34, 17–20 (2006).
Davì, M. et al. Magmatic evolution and plumbing system of ring-fault volcanism: The Vulcanello Peninsula (Aeolian Islands, Italy). Eur. J. Mineral. 21, 1009–1028 (2009).
Lofgren, G. E., Huss, G. R. & Wasserburg, G. J. An experimental study of trace-element partitioning between Ti-Al-clinopyroxene and melt: Equilibrium and kinetic effects including sector zoning. Am. Mineral. 91, 1596–1606 (2006).
Pontesilli, A. et al. Crystallization kinetics of clinopyroxene and titanomagnetite growing from a trachybasaltic melt: New insights from isothermal time-series experiments. Chem. Geol. 510, 113–129 (2019).
Mollo, S. & Hammer, J. E. Dynamic crystallization in magmas. Eur. Mineral. Union Notes Mineral. 16, 373–418 (2017).
Welsch, B. et al. Clinopyroxene in postshield haleakala ankaramite: 2. Texture, compositional zoning and supersaturation in the magma. Contrib. Mineral. Petr. 171, 6 (2016).
Ubide, T., Mollo, S., Zhao, J. X., Nazzari, M. & Scarlato, P. Sector-zoned clinopyroxene as a recorder of magma history, eruption triggers, and ascent rates. Geochim. Cosmochim. Acta 251, 265–283 (2019).
Ubide, T. et al. Deep magma storage revealed by multi-method elemental mapping of clinopyroxene megacrysts at Stromboli volcano. Front. Earth Sci. 7, 239 (2019).
Masotta, M. et al. The role of undercooling during clinopyroxene growth in trachybasaltic magmas: Insights on magma decompression and cooling at Mt Etna volcano.. Geochim. Cosmochim. Acta 268, 258–276 (2020).
Downes, M. J. Sector and oscillatory zoning in calcic augites from M. Etna. Sicily. Contrib. Mineral. Petr. 47, 187–196 (1974).
Ubide, T. & Kamber, B. S. Volcanic crystals as time capsules of eruption history. Nat. Commun. 9, 1–12 (2018).
Blundy, J. & Cashman, K. Ascent-driven crystallisation of dacite magmas at Mount St Helens, 1980–1986. Contrib. Mineral. Petrol. 140, 631–650 (2001).
Morgavi, D., Perugini, D., Campos, C. P., Ertel-Ingrisch, W. & Dingwell, D. B. Time evolution of chemical exchanges during mixing of rhyolitic and basaltic melts. Contrib. Mineral. Petrol. 166, 615–638 (2013).
Caricchi, L. et al. The build-up and triggers of volcanic eruptions. Nat. Rev. Earth Environ. 2, 458–476 (2021).
Costa, S., Masotta, M., Gioncada, A. & Pistolesi, M. a crystal mush perspective explains magma variability at La Fossa Volcano (Vulcano, Italy). Minerals 11(10), 1094 (2021).
Fusillo, R. et al. Deciphering post-caldera volcanism: Insight into the Vulcanello (Island of Vulcano, Southern Italy) eruptive activity based on geological and petrological constraints. Bull. Volcanol. 77, 76 (2015).
Corsaro, R. A., & Miraglia, L. Dynamics of 2004–2005 Mt. Etna effusive eruption as inferred from petrologic monitoring. Geophys. Res. Lett. 32(13) (2005).
Liu, E. J. et al. Petrologic monitoring at Volcán de Fuego. Guatemala. J. Volcanol. Geotherm. Res. 405, 107044 (2020).
Egozcue, J. J., Pawlowsky-Glahn, V., Mateu-Figueras, G. & Barcelo-Vidal, C. Isometric logratio transformations for compositional data analysis. Math. Geol. 35, 279–300 (2003).
Aitchison, J. The statistical analysis of compositional data. J. R. Stat. Soc. Ser. B Stat. Methodol. 44(2), 139–160 (1982).
R Core Team R: A Language and environment for statistical computing. Vienna: R Foundation for Statistical Computing. Available at: https://www.R-project.org/ (2017).
Ward, J. H. Jr. Hierarchical grouping to optimize an objective function. J. Am. Stat. Assoc. 58, 236–244 (1963).
Mahalanobis, P. C. On the generalized distance in statistics. Natl. Inst. Sci. India 2, 49–55 (1936).
Putirka, K. D. Thermometers and barometers for volcanic systems. Rev. Mineral. Geochem. 69, 61–120 (2008).
Wood, B. J. & Blundy, J. D. A predictive model for rare earth element partitioning between clinopyroxene and anhydrous silicate melt. Contrib. Mineral. Petr. 129, 166–181 (1997).
Clocchiatti, R. et al. Assessment of a shallow magmatic system: The 1888–90 eruption, Vulcano Island, Italy. Bull. Volcanol. 56, 466–486 (1994).
Acknowledgements
S.C. and M.M received fundings from the PRIN project “Time scales of solidification in magmas: Application to Volcanic Eruptions, Silicate Melts, Glasses, Glass-Ceramics” (grant number: 2017J277S9). L.C. received funding for this project from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement 677493—FEVER) and from the Swiss National Science Foundation (Grant No. 200021_184632). C.B. received fundings from the Swiss National Science Foundation (Grant No. 200021_129997). This research was also funded by project PRA_2018_41 to M.P. and and FFABR2017 to A.G. The authors thank O. Higgins (University of Geneva), A. Risplendente (University of Milano) for assistance during EPMA analyses and A. Musu (University of Geneva) for insightful discussions. This research was part of S.C. PhD program funded by a Tuscany Regional “Pegaso” doctoral grant.
Author information
Authors and Affiliations
Contributions
S.C., L.C. and M.P. conceived this study. Field work was carried out by M.P., M.R., and C.B. The initial manuscript draft was prepared by S.C. All authors contributed to data interpretation review and editing of the final manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Costa, S., Caricchi, L., Pistolesi, M. et al. A data driven approach to mineral chemistry unveils magmatic processes associated with long-lasting, low-intensity volcanic activity. Sci Rep 13, 1314 (2023). https://doi.org/10.1038/s41598-023-28370-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-28370-0
- Springer Nature Limited
This article is cited by
-
Long-lasting, small-to-moderate eruptions at composite volcanoes: reconstructing the largest eruption of Mt. Ruapehu (New Zealand) of the last two millennia
Bulletin of Volcanology (2024)
-
The last 1100 years of activity of La Fossa caldera, Vulcano Island (Italy): new insights into stratigraphy, chronology, and landscape evolution
Bulletin of Volcanology (2024)