Abstract
The present contribution concerns application of short and ultrashort lasers on surface processing of Ti6Al4V. Followed by a brief introduction of different available short and ultra-short lasers and their interaction mechanism with the material surface, a detailed discussion on the surface processing of Ti6Al4V with short and ultrashort laser, especially surface texturing, surface structuring and shock peening, will be discussed in detail. Surface texturing aims at developing a periodic surface roughness with the aim of modifying surface energy, coefficient of friction and corrosion resistance property. Surface structuring is also an important technique for modifying the surface for the tailorment of coefficient of friction, bioactivity and corrosion resistance. Shock peening is aimed at introducing shock wave-assisted residual stress (compressive) for enhancement of fatigue property. For all the short and ultrashort laser-assisted surface processing, laser parameters like wavelength, pulse width, energy density, scan speed, frequency, and the number of pulses play a role in determining the characteristics and properties of the surface. In this article, a detailed study on laser surface texturing, laser structuring and laser shock peening of Ti6Al4V and influence on properties will be discussed in detail.
Similar content being viewed by others
References
Ascari A, Fortunato A (2014) Nanosecond pulsed laser welding of high carbon steels. Opt Laser Technol 56:25–34. https://doi.org/10.1016/j.optlastec.2013.07.016
Ashkenasi D, Rosenfeld A, Varel H, Wähmer M, Campbell EE (1997) Laser processing of sapphire with picosecond and sub-picosecond pulses. Appl Surf Sci 120(1–2):65–80. https://doi.org/10.1016/S0169-4332(97)00218-3
Basting D, Pippert KD, Stamm U (2002) History and future prospects of excimer lasers. In: Miyamoto I, Lu YF, Sugioka K, Dubowski JJ (eds) Second international symposium on laser precision microfabrication, vol 4426(43), pp 25. https://doi.org/10.1117/12.456812
Birnbaum M (1965) Semiconductor surface damage produced by ruby lasers. J Appl Phys 36(11):3688–3689. https://doi.org/10.1063/1.1703071
Bogaerts A, Chen Z (2005) Effect of laser parameters on laser ablation and laser-induced plasma formation: a numerical modeling investigation. Spectrochim Acta Part B 60(9–10):1280–1307. https://doi.org/10.1016/j.sab.2005.06.009
Bonse J, Hohm S, Kirner SV, Rosenfeld A, Kruger J (2017) Laser-induced periodic surface structures—a scientific evergreen. IEEE J Sel Top Quantum Electron 23(3):1–59. https://doi.org/10.1109/JSTQE.2016.2614183
Borcherding K, Marx D, Gätjen L, Specht U, Salz D, Thiel K, Wildemann B, Grunwald I (2020) Impact of laser structuring on medical-grade titanium: surface characterization and in vitro evaluation of osteoblast attachment. Materials 13(8):2000. https://doi.org/10.3390/ma13082000
Breitling D, Ruf A, Berger PW, Dausinger FH, Klimentov SM, Pivovarov PA, Kononenko TV, Konov VI (2003) Plasma effects during ablation and drilling using pulsed solid-state lasers. In: Dausinger FH, Konov VI, Baranov VY, Panchenko VY (eds) Laser processing of advanced materials and laser microtechnologies, vol 5121(September), pp 24. https://doi.org/10.1117/12.513766
Bulgakova NM, Bourakov IM (2002) Phase explosion under ultrashort pulsed laser ablation: modeling with analysis of metastable state of melt. Appl Surf Sci 197–198:41–44. https://doi.org/10.1016/S0169-4332(02)00300-8
Coathup MJ, Blunn GW, Mirhosseini N, Erskine K, Liu Z, Garrod DR, Li L (2017) Controlled laser texturing of titanium results in reliable osteointegration. J Orthop Res 35(4):820–828. https://doi.org/10.1002/jor.23340
Čolić K, Sedmak A, Legweel K, Milošević M, Mitrović N, Mišković Ž, Hloch S (2017) Experimental and numerical research of mechanical behaviour of titanium alloy hip implant. Tehnicki Vjesnik Technical Gazette 24(3):709–713. https://doi.org/10.17559/TV-20160219132016
Cunha A, Oliveira V, Serro AP, Zouani OE-F, Almeida A, Durrieu M-C, Vilar R (2013a) Ultrafast laser texturing of Ti-6Al-4V surfaces for biomedical applications. Int Congr Appl Lasers Electroopt 910:910–918. https://doi.org/10.2351/1.5062989
Cunha A, Serro AP, Oliveira V, Almeida A, Vilar R, Durrieu M-C (2013b) Wetting behaviour of femtosecond laser textured Ti–6Al–4V surfaces. Appl Surf Sci 265:688–696. https://doi.org/10.1016/j.apsusc.2012.11.085
Dai FZ, Geng J, Tan WS, Ren XD, Lu JZ, Huang S (2018) Friction and wear on laser textured Ti6Al4V surface subjected to laser shock peening with contacting foil. Opt Laser Technol 103:142–150. https://doi.org/10.1016/j.optlastec.2017.12.044
Demir AG, Previtali B (2016) Dross-free submerged laser cutting of AZ31 Mg alloy for biodegradable stents. J Laser Appl 28(3):032001. https://doi.org/10.2351/1.4944751
Dileep M, Bathe R, Manna I, Padmanabham G, Dutta Majumdar J (2021) Ultrafast laser-induced periodic structuring of titanium alloy (Ti-6Al-4V). J Mater Eng Perform 30(6):4000–4011. https://doi.org/10.1007/s11665-021-05779-0
Dorman C, Schulze M (2008) Picosecond micromachining update. Laser Tech J 5(4):44–47. https://doi.org/10.1002/latj.200890044
Dumas V, Guignandon A, Vico L, Mauclair C, Zapata X, Linossier MT, Bouleftour W, Granier J, Peyroche S, Dumas J-C, Zahouani H, Rattner A (2015) Femtosecond laser nano/micro patterning of titanium influences mesenchymal stem cell adhesion and commitment. Biomed Mater 10(5):055002. https://doi.org/10.1088/1748-6041/10/5/055002
Dutta Majumdar J, Manna I (2011) Laser material processing. Int Mater Rev 56(5–6):341–388. https://doi.org/10.1179/1743280411Y.0000000003
Etsion I (2005) State of the art in laser surface texturing. J Tribol 127(1):248–253. https://doi.org/10.1115/1.1828070
Fabbro R, Peyre P, Berthe L, Scherpereel X (1998) Physics and applications of laser-shock processing. J Laser Appl 10(6):265–279. https://doi.org/10.2351/1.521861
Fang YW, Li YH, He WF, Li PY (2013) Effects of laser shock processing with different parameters and ways on residual stresses fields of a TC4 alloy blade. Mater Sci Eng A 559:683–692. https://doi.org/10.1016/j.msea.2012.09.009
Gamaly EG, Rode AV, Luther-Davies B, Tikhonchuk VT (2002) Ablation of solids by femtosecond lasers: ablation mechanism and ablation thresholds for metals and dielectrics. Phys Plasmas 9(3):949–957. https://doi.org/10.1063/1.1447555
Gamboa JR, Mohandes S, Tran PL, Slepian MJ, Yoon J-Y (2013) Linear fibroblast alignment on sinusoidal wave micropatterns. Colloids Surf B 104:318–325. https://doi.org/10.1016/j.colsurfb.2012.11.035
Gujba AK, Medraj M (2014) Laser peening process and its impact on materials properties in comparison with shot peening and ultrasonic impact peening. In: Douglas I (ed) Materials, vol 7, issue 12, pp 7925–7974. https://doi.org/10.3390/ma7127925
Gupta RK, Sundar R, Kumar BS, Ganesh P, Kaul R, Ranganathan K, Bindra KS, Kain V, Oak SM, Kukreja LM (2015) A hybrid laser surface treatment for refurbishment of stress corrosion cracking damaged 304L stainless steel. J Mater Eng Perform 24(6):2569–2576. https://doi.org/10.1007/s11665-015-1530-1
Hallab NJ, Bundy KJ, O’Connor K, Moses RL, Jacobs JJ (2001) Evaluation of metallic and polymeric biomaterial surface energy and surface roughness characteristics for directed cell adhesion. Tissue Eng 7(1):55–71. https://doi.org/10.1089/107632700300003297
Ho JR, Grigoropoulos CP, Humphrey JAC (1995) Computational study of heat transfer and gas dynamics in the pulsed laser evaporation of metals. J Appl Phys 78(7):4696–4709. https://doi.org/10.1063/1.359817
Hong X, Wang S, Guo D, Wu H, Wang J, Dai Y, Xia X, Xie Y (1998) Confining medium and absorptive overlay: their effects on a laser-induced shock wave. Opt Lasers Eng 29(6):447–455. https://doi.org/10.1016/S0143-8166(98)80012-2
Hu W, Shin YC, King G (2010) Energy transport analysis in ultrashort pulse laser ablation through combined molecular dynamics and Monte Carlo simulation. Phys Rev B 82(9):094111. https://doi.org/10.1103/PhysRevB.82.094111
In’t Veld BH, Overmeyer L, Schmidt M, Wegener K, Malshe A, Bartolo P (2015) Micro additive manufacturing using ultra short laser pulses. CIRP Ann 64(2):701–724. https://doi.org/10.1016/j.cirp.2015.05.007
Itina TE, Sentis ML (2004) Aspects and recent development of numerical modeling of laser ablation and laser plume expansion. In: Phipps CR (ed) High-power laser ablation V, vol 5448, Issue September, pp 596. https://doi.org/10.1117/12.548454
Jin X, Lan L, Gao S, He B, Rong Y (2020) Effects of laser shock peening on microstructure and fatigue behavior of Ti–6Al–4V alloy fabricated via electron beam melting. Mater Sci Eng A. https://doi.org/10.1016/j.msea.2020.139199
Kiran Kumar K, Samuel GL, Shunmugam MS (2019) Theoretical and experimental investigations of ultra-short pulse laser interaction on Ti6Al4V alloy. J Mater Process Technol 263(August 2018):266–275. https://doi.org/10.1016/j.jmatprotec.2018.08.028
Kumari R, Scharnweber T, Pfleging W, Besser H, Majumdar JD (2015) Laser surface textured titanium alloy (Ti-6Al-4V)—part II—studies on bio-compatibility. Appl Surf Sci 357:750–758. https://doi.org/10.1016/j.apsusc.2015.08.255
Kumari R, Pfleging W, Besser H, Majumdar JD (2019) Microstructure and corrosion behavior of laser induced periodic patterned titanium based alloy. Opt Laser Technol 116(March):196–213. https://doi.org/10.1016/j.optlastec.2019.03.017
LaHaye NL, Harilal SS, Diwakar PK, Hassanein A (2013) The effect of laser pulse duration on ICP-MS signal intensity, elemental fractionation, and detection limits in fs-LA-ICP-MS. J Anal Spectrom 28(11):1781. https://doi.org/10.1039/c3ja50200g
Lewis LJ, Perez D (2009) Laser ablation with short and ultrashort laser pulses: basic mechanisms from molecular-dynamics simulations. Appl Surf Sci 255(10):5101–5106. https://doi.org/10.1016/j.apsusc.2008.07.116
Li X, Guan Y (2020) Theoretical fundamentals of short pulse laser-metal interaction: a review. Nami Jishu Yu Jingmi Gongcheng/nanotechnol Precis Eng 3(3):105–125. https://doi.org/10.1016/j.npe.2020.08.001
Li Y-H, Wang B, Ma C-P, Fang Z-H, Chen L-F, Guan Y-C, Yang S-F (2019) Material characterization, thermal analysis, and mechanical performance of a laser-polished Ti alloy prepared by selective laser melting. Metals 9(2):112. https://doi.org/10.3390/met9020112
Liu X, Chu PK, Ding C (2004) Surface modification of titanium, titanium alloys, and related materials for biomedical applications. Mater Sci Eng R Rep 47(3–4):49–121. https://doi.org/10.1016/j.mser.2004.11.001
Lu L, ZhangJiaoGuan JLY (2019) Large-scale fabrication of nanostructure on bio-metallic substrate for surface enhanced Raman and fluorescence scattering. Nanomaterials 9(7):916. https://doi.org/10.3390/nano9070916
Ma CP, Guan YC, Zhou W (2017) Laser polishing of additive manufactured Ti alloys. Opt Lasers Eng 93(October 2016):171–177. https://doi.org/10.1016/j.optlaseng.2017.02.005
Mao X, Ciocan A, Borisov O, Russo R (1998) Laser ablation processes investigated using inductively coupled plasma–atomic emission spectroscopy (ICP–AES). Appl Surf Sci 127–129:262–268. https://doi.org/10.1016/S0169-4332(97)00787-3
Mao SS, Mao X, Greif R, Russo RE (2000a) Simulation of a picosecond laser ablation plasma. Appl Phys Lett 76(23):3370–3372. https://doi.org/10.1063/1.126651
Mao SS, Mao X, Greif R, Russo RE (2000b) Initiation of an early-stage plasma during picosecond laser ablation of solids. Appl Phys Lett 77(16):2464–2466. https://doi.org/10.1063/1.1318239
Maruo S, Nakamura O, Kawata S (1997) Three-dimensional microfabrication with two-photon-absorbed photopolymerization. Opt Lett 22(2):132. https://doi.org/10.1364/OL.22.000132
Meijer J, Du K, Gillner A, Hoffmann D, Kovalenko VS, Masuzawa T, Ostendorf A, Poprawe R, Schulz W (2002) Laser Machining by short and ultrashort pulses, state of the art and new opportunities in the age of the photons. CIRP Ann 51(2):531–550. https://doi.org/10.1016/S0007-8506(07)61699-0
Miyamoto I (2007) Fusion welding of glass using femtosecond laser pulses with high-repetition rates. J Laser Micro/nanoeng 2(1):57–63. https://doi.org/10.2961/jlmn.2007.01.0011
Mwenifumbo S, Li M, Chen J, Beye A, Soboyejo W (2007) Cell/surface interactions on laser micro-textured titanium-coated silicon surfaces. J Mater Sci Mater Med 18(1):9–23. https://doi.org/10.1007/s10856-006-0658-9
Neuenschwander B, Jaeggi B, Schmid M, Rouffiange V, Martin P-E (2012) Optimization of the volume ablation rate for metals at different laser pulse-durations from ps to fs. In: Hennig G, Xu X, Gu B, Nakata Y (eds) Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVII, vol 8243, Issue February 2012, pp 824307. https://doi.org/10.1117/12.908583
Peyre P, Berthe L, Scherpereel X, Fabbro R, Bartnicki E (1998) Experimental study of laser-driven shock waves in stainless steels. J Appl Phys 84(11):5985–5992. https://doi.org/10.1063/1.368894
Peyre P, Berthe L, Vignal V, Popa I, Baudin T (2012) Analysis of laser shock waves and resulting surface deformations in an Al–Cu–Li aluminum alloy. J Phys D Appl Phys 45(33):335304. https://doi.org/10.1088/0022-3727/45/33/335304
Pfleging W, Kumari R, Besser H, Scharnweber T, Majumdar JD (2015) Laser surface textured titanium alloy (Ti-6Al-4V): part 1—surface characterization. Appl Surf Sci 355:104–111. https://doi.org/10.1016/j.apsusc.2015.06.175
Prakash S, Kumar S (2017) Microchannel fabrication via direct laser writing. In: Microfabrication and precision engineering. Elsevier, pp 163–187. https://doi.org/10.1016/B978-0-85709-485-8.00006-1
Prasad K, Bazaka O, Chua M, Rochford M, Fedrick L, Spoor J, Symes R, Tieppo M, Collins C, Cao A, Markwell D, Ostrikov K, Bazaka K (2017) Metallic biomaterials: current challenges and opportunities. Materials 10(8):884. https://doi.org/10.3390/ma10080884
Prasad KN, Syed I, Subbu SK (2019) Laser dimple texturing—applications, process, challenges, and recent developments: a review. Aust J Mech Eng 00(00):1–16. https://doi.org/10.1080/14484846.2019.1705533
Qiang W, Yingchun G, Baoqiang C, Bojin Q (2016) Laser cleaning of commercial Al alloy surface for tungsten inert gas welding. J Laser Appl 28(2):022507. https://doi.org/10.2351/1.4943909
Ren X, Chen B, Jiao J, Yang Y, Zhou W, Tong Z (2020) Fatigue behavior of double-sided laser shock peened Ti-6Al-4V thin blade subjected to foreign object damage. Opt Laser Technol 121(2019):105784. https://doi.org/10.1016/j.optlastec.2019.105784
Rohloff M, Das SK, Höhm S, Grunwald R, Rosenfeld A, Krüger J, Bonse J (2011) Formation of laser-induced periodic surface structures on fused silica upon multiple cross-polarized double-femtosecond-laser-pulse irradiation sequences. J Appl Phys 110(1):014910. https://doi.org/10.1063/1.3605513
Sarapirom S, Lee JS, Jin SB, Song DH, Yu LD, Han JG, Chaiwong C (2013) Wettability effect of PECVD-SiOx films on poly(lactic acid) induced by oxygen plasma on protein adsorption and cell attachment. J Phys Conf Ser 423(1):012042. https://doi.org/10.1088/1742-6596/423/1/012042
Sedao X, Shugaev MV, Wu C, Douillard T, Esnouf C, Maurice C, Reynaud S, Pigeon F, Garrelie F, Zhigilei LV, Colombier JP (2016) Growth twinning and generation of high-frequency surface nanostructures in ultrafast laser-induced transient melting and resolidification. ACS Nano 10(7):6995–7007. https://doi.org/10.1021/acsnano.6b02970
Sharma A, Kumar A, Joshi G, John JT (2006) Retrospective study of implant failure in orthopaedic surgery. Med J Armed Forces India 62(1):70–72. https://doi.org/10.1016/S0377-1237(06)80164-4
Shemtov-Yona K, Rittel D (2015) An overview of the mechanical integrity of dental implants. Biomed Res Int 2015:1–11. https://doi.org/10.1155/2015/547384
Sibbett W, Lagatsky AA, Brown CTA (2012) The development and application of femtosecond laser systems. Opt Express 20(7):6989. https://doi.org/10.1364/OE.20.006989
Sinha S (2015) Thermal model for nanosecond laser ablation of alumina. Ceram Int 41(5):6596–6603. https://doi.org/10.1016/j.ceramint.2015.01.106
Soileau M (1984) Ripple structures associated with ordered surface defects in dielectrics. IEEE J Quantum Electron 20(5):464–467. https://doi.org/10.1109/JQE.1984.1072422
Sonntag S, Roth J, Gaehler F, Trebin H-R (2009) Femtosecond laser ablation of aluminium. Appl Surf Sci 255(24):9742–9744. https://doi.org/10.1016/j.apsusc.2009.04.062
Spence DE, Kean PN, Sibbett W (1991) 60-fsec pulse generation from a self-mode-locked Ti:sapphire laser. Opt Lett 16(1):42. https://doi.org/10.1364/OL.16.000042
Srinivasan R, Sutcliffe E, Braren B (1987) Ablation and etching of polymethylmethacrylate by very short (160 fs) ultraviolet (308 nm) laser pulses. Appl Phys Lett 51(16):1285–1287. https://doi.org/10.1063/1.99001
Stango SAX, Karthick D, Swaroop S, Mudali UK, Vijayalakshmi U (2018) Development of hydroxyapatite coatings on laser textured 316 LSS and Ti-6Al-4V and its electrochemical behavior in SBF solution for orthopedic applications. Ceram Int 44(3):3149–3160. https://doi.org/10.1016/j.ceramint.2017.11.083
Strickland D (2019) Nobel lecture: generating high-intensity ultrashort optical pulses. Rev Mod Phys 91(3):30502. https://doi.org/10.1103/RevModPhys.91.030502
Stróż A, Goryczka T, Łosiewicz B (2018) Electrochemical formation of self-organized nanotubular oxide layers on niobium (review). Curr Nanosci 15(1):42–48. https://doi.org/10.2174/1573413714666180115141012
Sun R, Li L, Zhu Y, Peng P, Li Q, Guo W (2019) Fatigue of Ti-17 titanium alloy with hole drilled prior and post to laser shock peening. Opt Laser Technol 115(February):166–170. https://doi.org/10.1016/j.optlastec.2019.02.019
Sun R, Che Z, Cao Z, Zou S, Wu J, Guo W, Zhu Y (2020) Fatigue behavior of Ti-17 titanium alloy subjected to different laser shock peened regions and its microstructural response. Surf Coat Technol 383(December 2019):125284. https://doi.org/10.1016/j.surfcoat.2019.125284
Sundaram SK, Mazur E (2002) Inducing and probing non-thermal transitions in semiconductors using femtosecond laser pulses. Nat Mater 1(4):217–224. https://doi.org/10.1038/nmat767
Trdan U, Grum J (2014) SEM/EDS characterization of laser shock peening effect on localized corrosion of Al alloy in a near natural chloride environment. Corros Sci 82:328–338. https://doi.org/10.1016/j.corsci.2014.01.032
Trdan U, Porro JA, Ocaña JL, Grum J (2012) Laser shock peening without absorbent coating (LSPwC) effect on 3D surface topography and mechanical properties of 6082–T651 Al alloy. Surf Coat Technol 208:109–116. https://doi.org/10.1016/j.surfcoat.2012.08.048
Trdan U, Skarba M, Grum J (2014) Laser shock peening effect on the dislocation transitions and grain refinement of Al–Mg–Si alloy. Mater Charact 97:57–68. https://doi.org/10.1016/j.matchar.2014.08.020
Wang H, He M, Liu H, Guan Y (2019) One-step fabrication of robust superhydrophobic steel surfaces with mechanical durability, thermal stability, and anti-icing function. ACS Appl Mater Interfaces 11(28):25586–25594. https://doi.org/10.1021/acsami.9b06865
Williamson RT, Robinson FG (2001) Retrieval technique for fractured implant screws. J Prosthet Dent 86(5):549–550. https://doi.org/10.1067/mpr.2001.118922
Wu N, Wang Z, Wang X, Shimotsuma Y, Nishi M, Miura K, Hirao K (2011) Nano-periodic structure formation on titanium thin film with a Femtosecond laser. J Ceram Soc Jpn 119(1395):898–901. https://doi.org/10.2109/jcersj2.119.898
Wu J, Wei W, Li X, Jia S, Qiu A (2013) Infrared nanosecond laser-metal ablation in atmosphere: Initial plasma during laser pulse and further expansion. Appl Phys Lett 102(16):164104. https://doi.org/10.1063/1.4803044
Xue T, Attarilar S, Liu S, Liu J, Song X, Li L, Zhao B, Tang Y (2020) Surface modification techniques of titanium and its alloys to functionally optimize their biomedical properties: thematic review. Front Bioeng Biotechnol 8(November):1–19. https://doi.org/10.3389/fbioe.2020.603072
Yang Y, Zhou W, Chen B, Tong Z, Chen L, Ren X (2020) Fatigue behaviors of foreign object damaged Ti-6Al-4V alloys under laser shock peening. Int J Fatigue 136(December 2019):105596. https://doi.org/10.1016/j.ijfatigue.2020.105596
Yu H, Deng H, Huang W, Wang X (2011) The effect of dimple shapes on friction of parallel surfaces. Proc Inst Mech Eng Part J J Eng Tribol 225(8):693–703. https://doi.org/10.1177/1350650111406045
Zhao X, Shin YC (2013a) Ablation dynamics of silicon by femtosecond laser and the role of early plasma. J Manuf Sci Eng 135(6):1–5. https://doi.org/10.1115/1.4025805
Zhao X, Shin YC (2013b) Femtosecond laser ablation of aluminum in vacuum and air at high laser intensity. Appl Surf Sci 283:94–99. https://doi.org/10.1016/j.apsusc.2013.06.037
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Dileep, M., Majumdar, J.D. Short and Ultrashort Laser Surface Processing of Alpha + Beta Titanium Alloy (Ti6Al4V): Present Status. Trans Indian Natl. Acad. Eng. 7, 851–871 (2022). https://doi.org/10.1007/s41403-022-00333-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s41403-022-00333-3