Abstract
Cellulose is the main structural component of plant cell walls. Cellulose is a fibrous, water-insoluble substance and is considered to be the most abundant bio-derived polymer on earth. From an industrial perspective, plant cellulose has been the mainstay of the wood industries for the past 100 years. The hierarchical organization and semicrystalline nature of cellulose found in plant fibers allows the extraction of nanofibers and nanocrystals using mechanical and chemical top-down de-structuring strategies. Bacterial cellulose has also been increasingly investigated. Bacterial cellulose is composed of cellulose nanofibers secreted extracellularly by some bacteria; bacterial cellulose is therefore obtained using bottom-up synthesis. The unique nanofibrillar structure of bacterial cellulose confers excellent physical and mechanical properties such as high porosity, high elastic modulus and high crystallinity. Research on nanocellulose is accelerating due actual fossil fuel issues such as CO2 emissions, plastic pollution and lack of renewable energy. Nanocellulose materials are non-toxic, biodegradable and recyclable, with no adverse effects on health and the environment. Here, we review cellulose production methods, properties and applications, focusing on the food industry, biomedical materials and electronic devices. We compare vegetal nanocellulose and bacterial cellulose. The increase in the number of publications on nanocellulose is also discussed.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Abushammala H, Mao J (2019) A review of the surface Modification of cellulose and nanocellulose using aliphatic and aromatic mono- and di-isocyanates. Molecules 24:2782. https://doi.org/10.3390/molecules24152782
Adel AM, Ibrahim A, El-Shafei A, Al-Shemy M (2019) Inclusion complex of clove oil with chitosan/β-cyclodextrin citrate/oxidized nanocellulose biocomposite for active food packaging. Food Packag Shelf Life 20:100307. https://doi.org/10.1016/j.fpsl.2019.100307
Adriano Brandelli A, Brum LFW, Santos JHZ (2017) Nanostructured bioactive compounds for ecological food packaging. Environ Chem Lett 15:193–204. https://doi.org/10.1007/s10311-017-0621-7
Albuquerque RM, Meira HM, Silva IDL, Galdino CJS, Almeida FCG, Amorim JDP, Vinhas GM, Costa AFS, Sarubbo LA (2020) Production of a bacterial cellulose/poly(3-hydroxybutyrate) blend activated with Clove essential oil for food packaging. Polym Polym Compos. in press
Amorim JDP, Costa AFS, Galdino CJS, Vinhas GM, Santos EMS, Sarubbo LA (2019) Bacterial cellulose production using industrial fruit residues as subtract to industrial application. Chem Eng Trans 74:1165–1170. https://doi.org/10.3303/cet1974195
Amorim JDP, Galdino CJS, Costa AFS, Almeida H, Vinhas GM, Sarubbo LA (2020) BioMask, a polymer blend for treatment and healing of skin prone to acne. Chem Eng Trans, vol79. in press
Azeredo HM (2018) Bacterial cellulose for food applications. Int J Adv Med Biotechnol—IJAMB 1(2):2. https://doi.org/10.25061/2595-3931/ijamb/2018.v1i2.17
Azeredo HMC, Barud H, Farinas CS, Vasconcellos VM, Claro AM (2019) Bacterial cellulose as a raw material for food and food packaging applications. Front Sustain Food Syst 3:7. https://doi.org/10.3389/fsufs.2019.00007
Azizi S, Alloin F, Dufresne A (2005) Review of recent research into cellulosic whiskers, their properties and their application in nanocomposite field. Biomacromol 6(2):612–626. https://doi.org/10.1021/acs.analchem.8b04058
Bae S, Shoda M, Sugano Y (2004) Improvement of bacterial cellulose production by addition of agar in a jar fermentor. J Biosci Bioeng 97(1):33–38. https://doi.org/10.1016/s1389-1723(04)70162-0
Balea A, Fuente E, Blanco A, Negro C (2019) Nanocelluloses: natural-based materials for fiber-reinforced cement composites. A critical review. Polymers 11(3):518. https://doi.org/10.3390/polym11030518
Bejoy T, Midhun CR, Athira KB, Rubiyah MH, Jithin JA, MooresGlenna LD, Clément S (2018) Nanocellulose, a versatile green platform: from biosources to materials and their applications. Chem Rev 118:11575–11625. https://doi.org/10.1021/acs.chemrev.7b00627
Bharimalia AK, Deshmukh SP, Vigneshwaran N, Patil PG, Prasad V (2017) Nanocellulose-polymer composites for applications in food packaging: current status, future prospects and challenges. Polym-Plast Technol Eng 56(8):805–823. https://doi.org/10.1080/03602559.2016.1233281
Bhattacharya M, Malinen MM, Lauren P, Lou YR, Kuisma SW, Kanninen L, Lille M, Corlu A, GuGuen-Guillouzo C, Ikkala O, Laukkanen A, Urtti A, Yliperttula M (2012) Nanofibrillar cellulose hydrogel promotes three-dimensional liver cell culture. J Control Release 164(3):291–298. https://doi.org/10.1016/j.jconrel.2012.06.039
Bideau B, Loranger E, Daneault C (2018) Nanocellulose-polypyrrole-coated paperboard for food packaging application. Prog Org Coat 123:128–133. https://doi.org/10.1016/j.porgcoat.2018.07.003
Bledzki AK, Reihmane S, Gassan J (1998) Thermoplastics reinforced with wood fillers: a literature review. Polym-Plast Technol Eng 37(4):451–468. https://doi.org/10.1080/03602559808001373
Brinchi L, Cotana F, Fortunati E, Kenny J (2013) Production of nanocrystalline cellulose from lignocellulosic biomass: technology and applications. Carbohydr Polym 94(1):154–169. https://doi.org/10.1016/j.carbpol.2013.01.033
Cavka A, Guo X, Tang S, Winestrand S, Jönsson LJ, Hong F (2013) Production of bacterial cellulose and enzyme from waste fiber sludge. Biotechnol Biofuels 6(1):25. https://doi.org/10.1186/1754-6834-6-25
Chu M, Gao H, Liu S, Wang L, Jia Y, Gao M, Wan M, Xu C, Ren L (2018) Functionalization of composite bacterial cellulose with C60 nanoparticles for wound dressing and cancer therapy. RSC Adv 8(33):18197–18203
Claro FC (2017) Elaboração e caracterização de filmes a partir de nanofibrilas de celulose vegetal. https://doi.org/10.1039/c8ra03965h
Clift MJD, Foster EJ, Vanhecke D, Studer D, Wick P, Gehr P, Rutishauser BR, Weder C (2011) Investigating the interaction of cellulose nanofibers derived from cotton with a sophisticated 3D human lung cell coculture. Biomacromol 12(10):3666–3673. https://doi.org/10.1021/bm200865j
Colombro S (2018) Com propriedades exclusivas, nanocelulose revoluciona materiais. J USP. https://jornal.usp.br/ciencias/ciencias-exatas-e-da-terra/com-propriedades-exclusivas-nanocelulose-revoluciona-materiais/
Costa A, Amorim JDP, Nascimento V, Gomes E, Araújo L, Sarubbo LA (2018) Residue from the production of sugar cane: an alternative nutrient used in biocellulose production by Gluconacetobacter hansenii. Chem Eng Trans 64:7–12. https://doi.org/10.3303/cet1864002
Cunha R. (2017) Nanocelulose é um inovador material extraído de plantas que revolucionará a ciência e a tecnologia—Stylo Urbano. http://www.stylourbano.com.br/nanocelulose-e-um-inovador-material-extraido-de-plantas-que-revolucionara-a-ciencia-e-a-tecnologia/
Da Gama FMP, Dourado F (2018) Bacterial nanocellulose: what future? BioImpacts: BI 8(1):1–3. https://doi.org/10.15171/bi.2018.01
Donini IA, De Salvi D, Fukumoto F, Lustri W, Barud H, Marchetto R, Messaddeq Y, Ribeiro SJL (2010a) Biossíntese e recentes avanços na produção de celulose bacteriana. Eclét Quím 35(4):165–178. https://doi.org/10.1590/s0100-46702010000400021
Donini IAN, Salvi DTB, Fukumoto FK, Lustri WR, Barud HS, Marchetto R, Messaddeq Y, Ribeiro SJL (2010b) Biosynthesis and recent advances in bacterial cellulose production. Eclét Quím 4:165–178. https://doi.org/10.1590/s0100-46702010000400021
Duarte EB, Andrade FK, Lima HLS, Do Nascimento ES, Carneiro MJM, De Fátima BM, Luz EPCG, Das Chagas BS, De Freitas RM. (2019) Celulose bacteriana propriedades, Meios Fermentativos e Aplicações.Embrapa Agroindústria Tropical
Dufresne A, Vignon MJ (1998) Improvement of starch film performances using cellulose microfibrils. Macromolecules 8:2693–2696. https://doi.org/10.1021/ma971532b
Dufresne A, Cavaille J, Vignon MJ (1997) Mechanical behavior of sheets prepared from sugar beet cellulose microfibrils. J Appl Polym Sci 64(6):1185–1194. https://doi.org/10.1002/(sici)1097-4628(19970509)64:6%3c1185:aid-app19%3e3.0.co;2-v
Ebrahimi Y, Peighambardoust S, Peighambardoust S, Karkaj S (2019) Development of antibacterial carboxymethyl cellulose-based nanobiocomposite films containing various metallic nanoparticles for food packaging applications. J Food Sci 84:2537–2548. https://doi.org/10.1111/1750-3841.14744
Evans BR, O‘Neill. HM, Malyvanh VP, Lee I, Woodward J (2003) Palladium-bacterial cellulose membranes for fuel cells. Biosens Bioelectron 18(7):917–923. https://doi.org/10.1016/s0956-5663(02)00212-9
Fan FR, Tian ZQ, Lin WZ (2012) Flexible triboelectric generator. Nano Energy 1(2):328–334. https://doi.org/10.1016/j.nanoen.2012.01.004
Favero D (2014) Obtenção de micro e nanocelulose para preparação de membranas poliméricas como barreira seletiva. Repository from the University of Caixias do Sul, Brazil. https://repositorio.ucs.br/handle/11338/907
Gama M, Gatenholm P, Klemm D (2012) Bacterial nanocellulose : a sophisticated multifunctional material. CRC Press, Boca Raton
Ganesh G, Wankei W, Jeffrey H (2005) Measurement of the elastic modulus of single bacterial cellulose fibers using atomic force microscopy. Langmuir. https://doi.org/10.1021/la0504311
Gelin K, Bodin A, Gatenholm P, Mihranyan A, Edwards K, Strømme M (2007) Characterization of water in bacterial cellulose using dielectric spectroscopy and electron microscopy. Polymer 48(26):7623–7631. https://doi.org/10.1016/j.polymer.2007.10.039
Gibson LJ (2012) The hierarchical structure and mechanics of plant materials. J R Soc Interface 9(76):2749–2766
Gomes FPS, Nuno HCS, Trovatti ES, Somes LFP (2013) Production of bacterial cellulose by Gluconacetobacter sacchari using dry olive mill residue. Biomass Bioenerg 55:205–211. https://doi.org/10.1016/j.biombioe.2013.02.004
Gómez HC, Serpa A, Velásquez-Cock J, Ganãín P, Castro C (2016) Vegetable nanocellulose in food science: a review. Food Hydrocoll 57:178–186. https://doi.org/10.1016/j.foodhyd.2016.01.023
Grishkewich N, Mohammed N, Tang J, Tam K (2017) Recent advances in the application of cellulose nanocrystals. Curr Opin Colloid Interface Sci 29:32–45. https://doi.org/10.1016/j.cocis.2017.01.005
Habibi Y, Goffin AL, Schiltz N, Duquesne E, Dubois P, Dufresne A (2008) Bionanocomposites based on poly(ε-caprolactone)-grafted cellulose nanocrystals by ring-opening polymerization. J Mater Chem 18(41):5002. https://doi.org/10.1039/b809212e
Henriksson M, Berglund L, Isaksson P, Lindström T, Nishino T (2008) Cellulose nanopaper structures of high toughness. Biomacromolecules 9(6):1579–1585. https://doi.org/10.1021/bm800038n
Hestrin S, Schramm M (1954) Synthesis of cellulose by Acetobacter xylinum. II. Preparation of freeze-dried cells capable of polymerizing glucose to cellulose. Biochem J 58(2):345–352. https://doi.org/10.1042/bj0580345
Hisseine OA, Wilson W, Sorelli L, Tolnai B, Tagnit-Hamou A (2019) Nanocellulose for improved concrete performance: a macro-to-micro investigation for disclosing the effects of cellulose filaments on strength of cement systems. Constr Build Mater 206:84–96. https://doi.org/10.1016/j.conbuildmat.2019.02.042
Hobzova R, Hrib J, Sirc J, Karpushkin E, Michalek J, Janouskova O, Gatenholm P (2018) Embedding of bacterial cellulose nanofibers within PHEMA hydrogel matrices: tunable stiffness composites with potential for biomedical applications. J Nanomater 2018:1–11. https://doi.org/10.1155/2018/5217095
Horii F, Hirai A, Yamamoto H (1997) Microstructural analysis of microfibrils of bacterial cellulose. Macromol Symp 120(1):197–205. https://doi.org/10.1002/masy.19971200120
Hsieh YC, Yano H, Nogi M, Eichhorn SJ (2008) An estimation of the Young’s modulus of bacterial cellulose filaments. Cellulose 15(4):507–513. https://doi.org/10.1007/s10570-008-9206-8
Hu W, Chen S, Yang J, Li Z, Wang H (2014) Functionalized bacterial cellulose derivatives and nanocomposites. Carbohydr Polym 101:1043–1060. https://doi.org/10.1016/j.carbpol.2013.09.102
Huang C, Guo HJ, Xiong L, Wang B, Shi SL, Chen XF, Lin XQ, Wang C, Luo J, Chen XD (2016) Using wastewater after lipid fermentation as substrate for bacterial cellulose production by Gluconacetobacter xylinus. Carbohydr Polym 136:198–202. https://doi.org/10.1016/j.carbpol.2015.09.043
Hubbe MO, Rojas OL, Lucian SM (2008) Cellulosic nanocomposites: a review. Bioresources 1:1. https://doi.org/10.15376/biores.3.3.929-980
Islam M, Alam M, Patrucco A, Montarsolo A, Zoccola M (2014) Preparation of nanocellulose: a review. AATCC J Res 1(5):17–23. https://doi.org/10.14504/ajr.1.5.3
Javanbakht S, Shaabani A (2019) Carboxymethyl cellulose-based oral delivery systems. Int J Biol Macromol 133:21–29. https://doi.org/10.1016/j.ijbiomac.2019.04.079
Jeong S, Lee SE, Yang H, Jin YH, Park CS, Park YS (2010) Toxicologic evaluation of bacterial synthesized cellulose in endothelial cells and animals. Mol Cell Toxicol 6(4):370–377. https://doi.org/10.1007/s13273-010-0049-7
Jung HI, Lee OM, Jeong JH, Jeon YD, Park KH, Kim HS, Ane WG (2010) Production and characterization of cellulose by Acetobacter sp. V6 using a cost-effective molasses–corn steep liquor medium. Appl Biochem Biotechnol 162(2):486–497. https://doi.org/10.1007/s12010-009-8759-9
Kamal S (2007) Nanotechnology and its applications in lignocellulosic composites, a mini review. Express Polym Lett 9:546–575. https://doi.org/10.3144/expresspolymlett.2007.78
Kargarzadeh H, Mariano M, Huang J, Lin N, Ahmad I, Dufresne A, Thomas S (2017) Recent developments on nanocellulose reinforced polymer nanocomposites: a review. Polymer 132:368–393. https://doi.org/10.1016/j.polymer.2017.09.043
Kim I, Jeon H, Kim D, You J, Kim D (2018) All-in-one cellulose based triboelectric nanogenerator for electronic paper using simple filtration process. Nano Energy 53:975–981. https://doi.org/10.1016/j.nanoen.2018.09.060
Klemm D, Heublein B, Fink HP, Bohn A (2005) Cellulose: fascinating biopolymer and sustainable raw material. Angew Chem Int Ed 44(22):3358–3393. https://doi.org/10.1002/anie.200460587
Klemm D, Schumann D, Kramer F, Hessler N, Hornung M, Schmauder HP, Marsch S (2006) Nanocelluloses as innovative polymers in research and application. In: Klemm D (ed) Polysaccharides. Springer, Berlin, pp 49–96. https://doi.org/10.1007/12_097
Klemm D, Welcke PK, Rauchfub F (2018) Nanocellulose as a natural source for groundbreaking applications in materials science: today’s state. Mater Today 21(7):720–748. https://doi.org/10.1016/j.mattod.2018.02.001
Koolman J, Rohm KH (2005) Color atlas of biochemistry, 2nd edn. Thieme Verlag, Stuttgart
Kotatha D, Morishima K, Uchida S, Ogino M, Ishikawa M, Futuike T, Tamura H (2018) Preparation and characterization of gel electrolyte with bacterial cellulose coated with alternating layers of chitosan and alginate for electric double-layer capacitors. Res Chem Intermed 44(8):4971–4987. https://doi.org/10.1007/s11164-018-3348-6
Kouda T, Yano H, Yoshinaga F, Kaminoyama M, Kamiwano M (1996) Characterization of non-newtonian behavior during mixing of bacterial cellulose in a bioreactor. J Ferment Bioeng 82(4):382–386. https://doi.org/10.1016/0922-338x(96)89155-0
Kurosumi A, Sasaki C, Yamashita Y, Nakamura Y (2009) Utilization of various fruit juices as carbon source for production of bacterial cellulose by Acetobacter xylinum NBRC 13693. Carbohydr Polym 76:333–335. https://doi.org/10.1016/j.carbpol.2008.11.009
Kuswandi B (2017) Environmental friendly food nano-packaging. Environ Chem Lett 15:205–222. https://doi.org/10.1007/s10311-017-0613-7
Lam E, Male KB, Chong JH, Leung AC, Luong JH (2012) Applications of functionalized and nanoparticle-modified nanocrystalline cellulose. Trends Biotechnol 30(5):283–290. https://doi.org/10.1016/j.tibtech.2012.02.001
Lavoine N, Desloges I, Dufresne A, Bras J (2012) Microfibrillated cellulose—its barrier properties and applications in cellulosic materials: a review. Carbohydr Polym 90(2):735–764. https://doi.org/10.1016/j.carbpol.2012.05.026
Lin N, Dufresne A (2014) Nanocellulose in biomedicine: current status and future prospect. Eur Polym J 59:302–325. https://doi.org/10.1016/j.eurpolymj.2014.07.025
Liu J, Korpinen R, Mikkonen KS, Willför S, Xu C (2014) Nanofibrillated cellulose originated from birch sawdust after sequential extractions: a promising polymeric material from waste to films. Cellulose 21(4):2587–2598. https://doi.org/10.1007/s10570-014-0321-4
Liu S, Zhang Y, Jiang H, Yao Y (2018) High CO2 adsorption by amino-modified bio-spherical cellulose nanofibres aerogels. Environ Chem Lett 16:605–614. https://doi.org/10.1007/s10311-017-0701-8
Lu J, Wu ZQL, McNabb HS (2000) Chemical coupling in wood fiber and polymer composites: a review of coupling agents and treatments. Wood Fiber Sci 32(1):88–104
Ma L, Liu R, Niu H, Zhao M, Huang Y (2016) Flexible and freestanding electrode based on polypyrrole/graphene/bacterial cellulose paper for supercapacitor. Compos Sci Technol 137:87–93. https://doi.org/10.1016/j.compscitech.2016.10.027
Maneerung T, Tokura S, Rujiravanit R (2008) Impregnation of silver nanoparticles into bacterial cellulose for antimicrobial wound dressing. Carbohydr Polym 72(1):43–51. https://doi.org/10.1016/j.carbpol.2007.07.025
Mariano M, El Kissi N, Dufresne A (2014) Cellulose nanocrystals and related nanocomposites: review of some properties and challenges. J Polym Sci, Part B: Polym Phys 52(12):791–806. https://doi.org/10.1002/polb.23490
Mikheenko IP, Gomez-Bolivar J, Mohamed L, Macaskie EL, Sharma S, Walker S, Hand R, Grail B, Johnson D, Orozco R (2019) upconversion of cellulosic waste into a potential “drop in fuel” via novel catalyst generated using Desulfovibrio desulfuricans and a consortium of acidophilic sulfidogens. Front Microbiol. https://doi.org/10.3389/fmicb.2019.00970
Miller J (2015) Nanocellulose: State of the industry. In: Nanotechnology for renewable nanomaterials conference. Anais https://www.tappinano.org/media/1114/cellulose-nanomaterials-production-state-of-the-industry-dec-2015.pdf
Mishra RK, Sabu A, Tiwari SK (2018) Materials chemistry and the futurist eco-friendly applications of nanocellulose: status and prospect. J Saudi Chem Soc 22(8):949–978. https://doi.org/10.1016/j.jscs.2018.02.005
Miyashiro D, Hamano R, Umemura K (2020) A review of applications using mixed materials of cellulose, nanocellulose and carbon nanotubes. Nanomaterials 10(2):186. https://doi.org/10.3390/nano10020186
Moon JR, Martine A, Nairn J, Simonsen J, Youngblood J (2011) Cellulose nanomaterials review: structure, properties and nanocomposites. Chem Soc Rev 40(7):3941–3994. https://doi.org/10.1039/c0cs00108b
Nakagaito AN, Yano H (2005) Novel high-strength biocomposites based on microfibrillated cellulose having nano-order-unit web-like network structure. Appl Phys A 80(1):155–159. https://doi.org/10.1007/s00339-003-2225-2
Nakagaito AN, Iwamoto S, Yano H (2005) Bacterial cellulose: the ultimate nano-scalar cellulose morphology for the production of high-strength composites. Appl Phys A 80(1):93–97. https://doi.org/10.1007/s00339-004-2932-3
Nakayama A, Kakugo A, Gong JP, Osada Y, Takai M, Erata T (2004) High mechanical strength double-network hydrogel with bacterial cellulose. Adv Funct Mater 14(11):1124–1128. https://doi.org/10.1002/adfm.200305197
Nascimento DM (2018a) Comparação ambiental e tecnológica de nanoestruturas de celulose obtidas da fibra de coco. Repository from EMBRAPA- Empresa Brasileira de Pesquisa Agropecuária, Ministério da Agricultura, Pecuária e Abastecimento, Federal University of Ceará, Brazil. https://www.alice.cnptia.embrapa.br/handle/doc/1102253
Nascimento ES (2018b) Filmes nanocompósitos à base de celulose bacteriana e nanocristais de celulose. Repository from EMBRAPA - Empresa Brasileira de Pesquisa Agropecuária, Ministério da Agricultura, Pecuária e Abastecimento, Federal University of Ceará, Brazil. https://www.repositorio.ufc.br/handle/riufc/34774
Nogi M, Abe K, Handa K, Nakatsubo F, Ifuku S, Yano H (2006) Property enhancement of optically transparent bionanofiber composites by acetylation. Appl Phys Lett 89(23):233123. https://doi.org/10.1063/1.2403901
Nogi M, Iwamoto S, Nakagaito AN (2009) Optically transparent nanofiber paper. Adv Mater 21(16):1595–1598. https://doi.org/10.1002/adma.200803174
Onuaguluchi O, Banthia N (2016) Plant-based natural fibre reinforced cement composites: a review. Cem Concr Compos 68:96–108. https://doi.org/10.1016/j.cemconcomp.2016.02.014
Orts WJ, Shey J, Imam SH, Glenn GM, Guttman ME (2005) Application of cellulose microfibrils in polymer nanocomposites. J Polym Environ 13(4):301–306. https://doi.org/10.1007/s10924-005-5514-3
Pacheco G, De Mello CV, Chiari-Andreo BG, Isaac VLB, Ribeiro SJL, Pecoraro E, Trovatti E (2018) Bacterial cellulose skin masks-properties and sensory tests. J Cosmet Dermatol 17(5):840–847. https://doi.org/10.1111/jocd.12441
Pecoraro É, Manzani D, Messaddeq Y, Ribeiro SJL (2008) Bacterial cellulose from Glucanacetobacter xylinus: preparation, properties and applications. In: Monomers, polymers and composites from renewable resources. Elsevier, pp 369–383. https://doi.org/10.1016/b978-0-08-045316-3.00017-x
Phanthong P, Reubroycharoen P, Hao X, Xu G, Abudula A, Guan G (2018) Nanocellulose: extraction and application. Carbon Resour Convers 1(1):32–43. https://doi.org/10.1016/j.crcon.2018.05.004
Postek MT, Vlaar A, Dagata J, Farkas N, Ming B, Wagner R, Raman A, Moon RJ, Sabo R, Wegner HT (2011) Development of the metrology and imaging of cellulose nanocrystals. Meas Sci Technol 22(2):024005. https://doi.org/10.1088/0957-0233/22/2/024005
Rai M, Ingle AP, Gupta I, Pandit R, Paralikar P, Gade A, Chaud MV, Santos CA (2019) Smart nanopackaging for the enhancement of food shelf life. Environ Chem Lett 17:277–290. https://doi.org/10.1007/s10311-018-0794-8
Reid MS, Villalobos M, Cranston ED (2017) Benchmarking cellulose nanocrystals: from the laboratory to industrial production. Langmuir 33(7):1583–1598. https://doi.org/10.1021/acs.langmuir.6b03765
Rinaldi R, Schuth F (2009) Design of solid catalysts for the conversion of biomass. Energy Environ Sci 2(6):610. https://doi.org/10.1039/b902668a
Roman M, Winter WT (2006) Cellulose nanocrystals for thermoplastic reinforcement: effect of filler surface chemistry on composite properties, pp 99–113. https://doi.org/10.1021/bk-2006-0938.ch008
Romling U (2002) Molecular biology of cellulose production in bacteria. Res Microbiol 153(4):205–212. https://doi.org/10.1016/s0923-2508(02)01316-5
Rose M, Palkovits R (2011) Cellulose-based sustainable polymers: state of the art and future trends. Macromol Rapid Commun 32(17):1299–1311. https://doi.org/10.1002/marc.201100230
Ross P, Mayer R, Benziman M (1991) Cellulose biosynthesis and function in bacteria. Microbiol Rev 55(1):35–58. https://doi.org/10.1128/MMBR.55.1.35-58.1991
Ruka DR, Simon GP, Dean KM (2013) In situ modifications to bacterial cellulose with the water insoluble polymer poly-3-hydroxybutyrate. Carbohydr Polym 92(2):1717–1723. https://doi.org/10.1016/j.carbpol.2012.11.007
Sacui IA, Nieuwendaal RC, Burnett DJ, Stranick SJ, Jorfi M, Weder C, Foster EJ, Olsson RT, Gilman JW (2014) Comparison of the properties of cellulose nanocrystals and cellulose nanofibrils isolated from bacteria, tunicate, and wood processed using acid, enzymatic, mechanical, and oxidative methods. ACS Appl Mater Interfaces 6(9):6127–6138. https://doi.org/10.1021/am500359f
Saibuatong O, Phisalaphong M (2010) Novo aloe vera–bacterial cellulose composite film from biosynthesis. Carbohydr Polym 79(2):455–460. https://doi.org/10.1016/j.carbpol.2009.08.039
Sarwar MS, Niazi M, Jahan Z, Ahmad T, Hussain A (2018) Preparation and characterization of PVA/nanocellulose/Ag nanocomposite films for antimicrobial food packaging. Carbohydr Polym 184:453–464. https://doi.org/10.1016/j.carbpol.2017.12.068
Seol ML, Han J, Moon D, Yoon K, Hwang C, Meyyappan M (2018) All-printed triboelectric nanogenerator. Nano Energy 44:82–88. https://doi.org/10.1016/j.nanoen.2017.11.067
Serafica G, Mormino R, Bungay H (2002) Inclusion of solid particles in bacterial cellulose. Appl Microbiol Biotechnol 58(6):756–760. https://doi.org/10.1007/s00253-002-0978-8
Shaghaleh H, Xu X, Wang S (2018) Current progress in production of biopolymeric materials based on cellulose, cellulose nanofibers, and cellulose derivatives. RSC Adv 8(2):825–842. https://doi.org/10.1039/c7ra11157f
Shah N, Ul-Islam M, Khattak WA, Park JK (2013) Overview of bacterial cellulose composites: a multipurpose advanced material. Carbohydr Polym 98(2):1585–1598. https://doi.org/10.1016/j.carbpol.2013.08.018
Sharma A, Thakur M, Bhattacharya M, Mandal T, Goswami S (2019) Commercial application of cellulose nano-composites—a review. Biotechnol Rep 21:e00316. https://doi.org/10.1016/j.btre.2019.e00316
Shezad O, Khan S, Khan T, Park J (2010) Physicochemical and mechanical characterization of bacterial cellulose produced with an excellent productivity in static conditions using a simple fed-batch cultivation strategy. Carbohydr Polym 82(1):173–180. https://doi.org/10.1016/j.carbpol.2010.04.052
Silva MJ (2013) Obtenção e caracterização de nanocompósitos de borracha natural reforçada com nanofibras de celulose recobertas com polianilina. Repository from the State University of São Paulo (UNESP), Brazil. https://repositorio.unesp.br/handle/11449/102524?locale-attribute=es
Silva RA (2019a) Avaliação do ciclo de vida da produção de celulose bacteriana em diferentes meios de cultivo. Repository from EMBRAPA - Empresa Brasileira de Pesquisa Agropecuária, Ministério da Agricultura, Pecuária e Abastecimento, Brazil. https://www.alice.cnptia.embrapa.br/handle/doc/1107860
Silva SMF (2019b) Filmes compósitos de celulose bacteriana e goma de cajueiro para aplicação em alimentos. Repository from EMBRAPA - Empresa Brasileira de Pesquisa Agropecuária, Ministério da Agricultura, Pecuária e Abastecimento, Brazil. https://www.alice.cnptia.embrapa.br/handle/doc/1102197
Silva D, D′Almeida M (2009) Nanocristais de celulose. O Papel, v 70, pp 34–52. https://www.revistaopapel.org.br/noticia-anexos/1311883542_1b4f1881c01129ce934b0cb4b4ebb9ab_343315426.pdf
Souza NF, Pinheiro JA, Iraidy AB, Morais PS, Chayn JA, Souza LMF, Men RF (2013) Obtenção de nanocelulose extraída de resíduos lignocelulósicos do mesocarpo do dendê. Repository from EMBRAPA - Empresa Brasileira de Pesquisa Agropecuária, Ministério da Agricultura, Pecuária e Abastecimento, Brazil. https://ainfo.cnptia.embrapa.br/digital/bitstream/item/88516/1/2013-056.pdf
Spence KL, Venditti RA, Rojas OJ, Habibi Y, Pawlak JJ (2010) The effect of chemical composition on microfibrillar cellulose films from wood pulps: water interactions and physical properties for packaging applications. Cellulose 17(4):835–848. https://doi.org/10.1007/s10570-010-9424-8
Stasiak-Rozanska L, Ploska J (2018) Study on the use of microbial cellulose as a biocarrier for 1,3-dihydroxy-2-propanone and its potential application in industry. Polymers 10(4):438. https://doi.org/10.3390/polym10040438
Stumpf TR, Yang X, Zhang J, Cao X (2018) In situ and ex situ modifications of bacterial cellulose for applications in tissue engineering. Mater Sci Eng C 82:372–383. https://doi.org/10.1016/j.msec.2016.11.121
Sun DP, Zhou LL, Wu QH, Yang SL (2007) Preliminary research on structure and properties of nano-cellulose. J Wuhan Univ Technol Mater Sci Ed 22(4):677–680. https://doi.org/10.1007/s11595-006-4677-7
Suresh L, Vaghasiya J, Jones M, Tan SC (2019) Biodegradable protein-based photoelectrochemical cells with biopolymer composite electrodes that enable recovery of valuable metals. ACS Sustain Chem Eng 7:8834–8841. https://doi.org/10.1021/acssuschemeng.9b00790
Taipina MO (2012) Nanocristais de celulose: obtenção, caracterização e modificação de superfície. Repository from the State University of Campinas, Brazil. https://repositorio.unicamp.br/handle/REPOSIP/248724
Tang W, Jia S, Jia Y, Yang H (2010) The influence of fermentation conditions and post-treatment methods on porosity of bacterial cellulose membrane. World J Microbiol Biotechnol 26(1):125–131. https://doi.org/10.1007/s11274-009-0151-y
Torres FG, Troncoso OP, Lopez D, Grande C, Gomez CM (2009) Reversible stress softening and stress recovery of cellulose networks. Soft Matter 5(21):4185. https://doi.org/10.1039/b900441f
Trovatti E, Serafim LS, Freire CSR, Silvestre AJD, Neto CP (2011) Gluconacetobacter sacchari: an efficient bacterial cellulose cell-factory. Carbohydr Polym 86(3):1417–1420. https://doi.org/10.1016/j.carbpol.2011.06.046
Tyagi N, Suresh S (2016) Production of cellulose from sugarcane molasses using Gluconacetobacter intermedius SNT-1: optimization & characterization. J Clean Prod 112:71–80. https://doi.org/10.1016/j.jclepro.2015.07.054
Ul-Islam M, Khan T, Park JK (2012) Water holding and release properties of bacterial cellulose obtained by in situ and ex situ modification. Carbohydr Polym 88(2):596–603. https://doi.org/10.1016/j.carbpol.2012.01.006
Valentim RMB (2018) Síntese e caracterização de cerâmicas bifásicas de fosfatos de cálcio (HA / β-TCP) a partir de nanocelulose do tegumento do açaí (Euterpe oleracea Mart.). Repository from the Federal Universty of Paraná, Brazil. https://repositorio.ufpa.br/jspui/handle/2011/10527
Varghese AG, Paul SA, Latha MS (2019) Remediation of heavy metals and dyes from wastewater using cellulose-based adsorbents. Environ Chem Lett 17:867–877. https://doi.org/10.1007/s10311-018-00843-z
Vazquez AF, Foresti L, Cerrutti P, Galvagno M (2013) Bacterial cellulose from simple and low cost production media by Gluconacetobacter xylinus. J Polym Environ 21(2):545–554. https://doi.org/10.1007/s10924-012-0541-3
Ventura-Cruz S, Tecante A (2019) Extraction and characterization of cellulose nanofibers from Rose stems (Rosa spp.). Carbohydr Polym 220:53–59. https://doi.org/10.1016/j.carbpol.2019.05.053
Ververis C, Georghiou K, Christodoulakis N, Santas P, Rerveris C (2004) Fiber dimensions, lignin and cellulose content of various plant materials and their suitability for paper production. Ind Crops Prod 19(3):245–254. https://doi.org/10.1016/j.indcrop.2003.10.006
Vianna ASJ, Costa SA, Gianini H (2016) Nanocompósitos poliméricos a base de nanocristais de celulose. Semioses 10(1):54–70. https://doi.org/10.15202/1981-996x.2016v10n1p54
Vieira D (2015) Obtenção e caracterização de nanocelulose a partir de fibras de Chorisia speciosa St. Hil. Repository from the State University of São Paulo (UNESP), Brazil. p 60. https://repositorio.unesp.br/handle/11449/139202
Wan Y, Li J, Yang Z, Ao H, Xiong L, Luo H (2018) Simultaneously depositing polyaniline onto bacterial cellulose nanofibers and graphene nanosheets toward electrically conductive nanocomposites. Curr Appl Phys 18(8):933–940. https://doi.org/10.1016/j.cap.2018.05.008
Wang Q, Yao Q, Liu J, Sun J, Zhu Q, Chen H (2019) Processing nanocellulose to bulk materials: a review. Cellulose 26(13–14):7585–7617. https://doi.org/10.1007/s10570-019-02642-3
Wei J, Meyer C (2015) Degradation mechanisms of natural fiber in the matrix of cement composites. Cem Concr Res 73:1–16. https://doi.org/10.1016/j.cemconres.2015.02.019
Wicklein B, Kocjan A, Salazar-Alvarez G, Carosio F, Camino G, Antonietti M, Bergstrom L (2015) Thermally insulating and fire-retardant lightweight anisotropic foams based on nanocellulose and graphene oxide. Nat Nanotechnol 10(3):277–283. https://doi.org/10.1038/nnano.2014.248
Xie Y, Zheng Y, Fan J, Wang Y, Yue L, Zhang N (2018) Novel electronic-ionic hybrid conductive composites for multifunctional flexible bioelectrode based on in situ synthesis of poly(dopamine) on bacterial cellulose. ACS Appl Mater Interfaces 10(26):22692–22702. https://doi.org/10.1021/acsami.8b05345
Xu X, Long F, Jiang LJ, Zhu Y, Haagenson D, Wiesenborn DP (2013) Cellulose nanocrystals vs. cellulose nanofibrils: a comparative study on their microstructures and effects as polymer reinforcing agents. ACS Appl Mater Interfaces 5(8):2999–3009. https://doi.org/10.1021/am302624t
Yan Z, Chen S, Wang H, Wang B, Jiang J (2008) Biosynthesis of bacterial cellulose/multi-walled carbon nanotubes in agitated culture. Carbohydr Polym 74(3):659–665. https://doi.org/10.1016/j.carbpol.2008.04.028
Yassin MA, Gad A, Ghanem A, Abdel RM (2019) Green synthesis of cellulose nanofibers using immobilized cellulase. Carbohydr Polym 205:255–260. https://doi.org/10.1016/j.carbpol.2018.10.040
Yoon SH, Jin HJ, Kook MC, Pyun YR (2006) Electrically conductive bacterial cellulose by incorporation of carbon nanotubes. Biomacromolecules 7(4):1280–1284. https://doi.org/10.1021/bm050597g
Yu L, Dean K, Li L (2006) Polymer blends and composites from renewable resources. Prog Polym Sci 31(6):576–602. https://doi.org/10.1016/j.progpolymsci.2006.03.002
Zhang X, Lin Z, Chen B, Sharma S, Wong C, Zhang W (2013) Solid-state, flexible, high strength paper-based supercapacitors. J Mater Chem A 1(19):5835. https://doi.org/10.1039/c3ta10827a
Zhu H, Fang Z, Preston C, Li Y, Hu L (2014) Transparent paper: fabrications, properties, and device applications. Energy Environ Sci 7(1):269–287. https://doi.org/10.1039/c3ee43024c
Zmejkoski D, Spasojevic D, Orlovska I, Kozyrovska N, Sokovic M, Glamoclija J, Dmitrovic S, Matovic B, Tasic N, Maksimovic V, Sosnin M, Radotic K (2018) Bacterial cellulose-lignin composite hydrogel as a promising agent in chronic wound healing. Int J Biol Macromol 118(Pt A):494–503. https://doi.org/10.1016/j.ijbiomac.2018.06.067
Acknowledgements
This study was funded by the following Brazilian fostering agencies: Foundation for the Support of Science and Technology of the State of Pernambuco (FACEPE), the National Council for Scientific and Technological Development (CNPq) and the Coordination for the Improvement of Higher Level Education Personnel (CAPES).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
de Amorim, J.D.P., de Souza, K.C., Duarte, C.R. et al. Plant and bacterial nanocellulose: production, properties and applications in medicine, food, cosmetics, electronics and engineering. A review. Environ Chem Lett 18, 851–869 (2020). https://doi.org/10.1007/s10311-020-00989-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10311-020-00989-9