Abstract
This paper reports a facile approach to glycidyl methacrylate (GMA)-based polyHIPE monoliths with high epoxy-group content, which are fabricated using a high internal phase emulsion (HIPE) template via radiation-induced polymerization at room temperature. The effects of the polymerization temperature and the pore sizes of polyHIPE monoliths on the content of epoxy groups are investigated. Results show that the polymerization temperature is the most important factor in influencing the content of epoxy groups in GMA-based polyHIPE monoliths. To prove their superiority over monoliths with low epoxy-group contents, the as-prepared polyHIPE monoliths are applied in phenol removal from cigarette smoke through a reaction between the epoxy group and phenol. The results show that the higher the content of epoxy groups in the polyHIPE monoliths, the higher the rate of phenol removal, indicating their high performance in these specific applications for the polyHIPE monoliths with high epoxy-group contents.
Similar content being viewed by others
References
Cameron NR, Sherrington DC (1996) Adv Polym Sci 126:163–214
Hainey P, Huxham IM, Rowatt B, Sherrington DC, Tetley L (1991) Macromolecules 24:117–121
Barbetta A, Cameron NR, Cooper SJ (2000) Chem Commun 221-222
Zhang H, Cooper AI (2005) Soft Matter 1:107–113
Menner A, Powell R, Bismarck A (2006) Macromolecules 39:2034–2035
Cameron NR (2005) Polymer 46:1439–1449
Busby W, Cameron NR, Jahoda CA (2001) Biomacromolecules 2:154–164
Christenson EM, Soofi W, Holm J, Cameron NR, Mikos AG (2007) Biomacromolecules 8:3806–3814
Akay G, Birchand MA, Bokhari MA (2004) Biomaterials 25:3991–4000
Bokhari M, Carnachan RJ, Przyborski SA, Cameron NR (2007) J Mater Chem 17:4088–4094
Zhao C, Danish E, Cameron NR, Kataky R (2007) J Mater Chem 17:2446–2453
Small PW, Sherrington DC (1989) J Chem Soc-Chem Commun 21:1589–1591
Ottens M, Leene G, Beenackers ACCM, Cameron NR, Sherrington DC (2000) Ind Eng Chem Res 39:259–266
Zhang S, Chen J, Perchyonok VT (2008) Lett Org Chem 5:304–309
Su F, Bray CL, Tan B, Cooper AI (2008) Adv Mater 20:2663–2666
Barbetta A, Cameron NR (2004) Macromolecules 37:3188–3201
Barbetta A, Cameron NR (2004) Macromolecules 37:3202–3213
Carnachan RJ, Bokhari M, Przyborski SA, Cameron NR (2006) Soft Matter 2:608–616
Cameron NR, Sherrington DC (1997) J Mater Chem 7:2209–2212
Edwards JC, Gregory DP (1987) Sharples M. Eur Pat(239360)
Edwards JC, Gregory DP (1988) Sharples M. US Pat(4788225)
Bayramoğlu G, Kaya B, Arica MY (2005) Food Chem 92:261–268
Bayramoğlu G, Akgöl S, Bulut A, Denizli A, Arica MY (2003) Biochem Eng J 14:117–126
Benčina M, Benčina K, Štrancar A, Podgornik A (2005) J Chromat A 1065:83–91
Zhang X, Guan RF, Chan DY (2005) J Mol Catal B: Enzymatic 33:43–50
Petro M, Svec F, Frèchet JM (1996) Biotech Bioeng 49:355–363
Godjrvargova T, Kousolov V, Dimov A (1999) J Membrane Sci 152:235–242
Svec F, Frèchet JM (1995) J Chromat A 705:89–103
Svec F, Frèchet JM (1995) Biotech Bioeng 48:476–480
Luo Q, Zou H, Xiao X, Guo Z, Kong L, Mao X (2001) J Chromat 926:255–264
Majer J, Krajnc P (2010) Macromol Symp 296:5–10
Sprob J, Sinz A (2012) Anal Bioanal Chem 402:2395–2405
Jia M, Qin L, He XW, Li WY (2012) J Mater Chem 22:707–713
Van Berkel PM, Punt M, Koolhaas GJAA, Driessen WL, Reedijk J, Sherrington DC (1997) React Funct Polym 32:139–151
Hainey P, Sherrington DC (2000) React Funct Polym 43:195–210
Bicak N, Sherrington DC, Sungur TS, Nükhet T (2003) React Funct Polym 54:141–147
Beneš MJ, Horák D, Švec F (2005) J Sep Sci 28:1855–1875
Krajnc P, Leber N, Štefanec D, Kontrec S, Podgornik A (2005) J Chromat A 1065:69–73
Yao CH, Qi L, Jia HY, Xin PY, Yang GL, Chen Y (2009) J Mater Chem 19:767–772
Barbetta A, Dentini M, Leandri L, Ferraris G, Coletta A (2009) React Funct Polym 69:724–736
Wang XB, Zhang ZC, Chen J, Wang SJ (2007) Mater Lett 61:2662–2666
Wu DZ, Ge XW, Zhang ZC, Wang MZ, Zhang SL (2004) Langmuir 20:5192–5195
Yang S, Liu HR (2006) J Mater Chem 16:4480–4487
Yang S, Liu HR, Zhang ZC (2008) J Polym Sci Pol Chem 46:3900–3910
Yang S, Liu HR, Huang HF, Zhang ZC (2009) J Colloid Interf Sci 338:584–590
Li TT, Liu HR, Zeng L, Yang S, Li ZC, Zhang JD, Zhou XT (2011) J Mater Chem 21:12865–12872
Mao DL, Li TT, Liu HR, Liu ZC, Shao H (2013) Li Min. Colloid Poly Sci 291:1649–1656
Wang SF, Zhang ZC, Liu HR, Zhang W, Qian Z, Wang BB (2010) Colloid Poly Sci 288:1031–1039
Atawodi SE, Preussmann R, Spiegelhalder B (1995) Cancer Lett 97:1–6
Health Canada Test Method T-1140-Determination of phenolic compounds in mainstream tobacco smoke (1999)
Kabalnov AS, Shchukin EG (1992) Adv Colloid Interface Sci 38:69–97
Zhang SM, Chen JD, Perchyonok VT (2009) Polymer 501:723–731
Xie JP (2008) CORESTA Congress, Shanghai, China
Acknowledgments
This work was supported by the National Natural Science Foundation of China (51003122, 50873096), the National Science and Technology Project of China (322012AK0030), and the Key Science and Technology Projects of CNTC (312010AA0040).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Yang, S., Zeng, L., Wang, Y. et al. Facile approach to glycidyl methacrylate-based polyHIPE monoliths with high epoxy-group content. Colloid Polym Sci 292, 2563–2570 (2014). https://doi.org/10.1007/s00396-014-3295-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00396-014-3295-8