1. Use of fly ash in the production of geopolymers: a literature review

   • Muñoz Pérez Sócrates Pedro
   • Charca Mamani Samuel
   • Reyes Gutiérrez Carlos Guillermo

   Review 12 May 2022 Article: 236

   

2. Thermal, chemical and rheological properties of asphalt binders extracted from field cores

   • Eslam Deef-Allah
   • Magdy Abdelrahman

   Technical paper 11 May 2022 Article: 235

   

3. Durability performance of expansive soil ameliorated with binary blend of additives for infrastructure delivery

   • Imoh Christopher Attah
   • Fidelis Onyebuchi Okafor
   • Onuegbu Okoronkwo Ugwu

   Technical paper 10 May 2022 Article: 234

   

4. The effect of using low reactive metakaolin on performances of geopolymer binder

   • Boumediene Mehsas
   • Mohammed Siline
   • Leila Zeghichi

   Technical paper 08 May 2022 Article: 233

   

5. Vulnerable member assessment of power transmission towers collapsed during Vardah cyclone

   • A. Haamidh
   • J. Sivasubramanian
   • G. Selva Sakthi

   Case study 06 May 2022 Article: 232

   

6. Artificial neural network-based roughness prediction models for gravel roads considering land use

   • Osama Abu Daoud
   • Khaled Ksaibati

   Technical paper 06 May 2022 Article: 231

   

7. Performance evaluation of post-grouted drilled shafts: a review

   • Danny José Useche-Infante
   • Gonzalo Martin Aiassa-Martinez
   • Marcelo Eberhardt

   State-of-the-art paper 03 May 2022 Article: 230

   

8. A state of review: challenges and techniques of laterite soil stabilisation using chemical, economical, and eco-friendly materials

   • Ali Muftah Abdussalam Ezreig
   • Mohd Ashraf Mohamad Ismail
   • Khaled Ibrahim Azarroug Ehwailat

   State-of-the-art paper 03 May 2022 Article: 229

   

9. An experimental study on the rocking behavior of circular and square footings under slow-cyclic loading

   • Ali Khezri
   • Seyed Majdeddin Mir Mohammad Hosseini
   • Fereshteh Rahmani

   Technical paper 03 May 2022 Article: 228

   

10. Developing machine learning model to estimate the shear capacity for RC beams with stirrups using standard building codes

    • Md Nasir Uddin
    • Kequan Yu
    • Wael Alhaddad

    Technical paper 27 April 2022 Article: 227

    

11. Electroless nickel (EN) coating of mild steel bar as an innovative material enhancement strategies to resist corrosion in coastal structures

    • S. Gunaselvi
    • J. S. Sudarsan
    • S. Nithyanantham

    Short Communication 25 April 2022 Article: 226

    

12. Razzaza Lake, a natural water body: its hydraulic characteristics and water quality

    • Mohammad Ali Al-Anbari
    • Nariman Yahya Othman
    • Mohammed Muslem Owayed

    Technical paper 22 April 2022 Article: 225

    

13. Influence of spatial variability of soil elastic modulus on elastic settlement of rectangular footing under fuzzy uncertainty

    • Rajarshi Pramanik
    • Dilip Kumar Baidya

    Technical note 22 April 2022 Article: 224

    

14. An experimental study on silica fume and metakaolin doped portland cement-based mortars using silica aerogel and air-entraining admixture

    • Yurdakul Aygörmez

    Technical paper 21 April 2022 Article: 223

    

15. Numerical study on the behaviour of resilient beam-column end plate connection with dual structural fuse

    • C. Arunkumar
    • N. Umamaheswari

    Practice-oriented paper 21 April 2022 Article: 222

    

16. Effect of bed dredging near to existing retaining wall based on experimental study

    • Ashraf K. Nazir
    • A. M. A. Nasr
    • Mohamed A. Elwakil

    Technical paper 20 April 2022 Article: 221

    

17. Evaluation of impact factor parameters for T-girder concrete bridge considering multi-lane vehicle movement

    • Abdulwahid Kemal
    • Sudip Talukdar

    Technical paper 20 April 2022 Article: 220

    

18. Response of piers installed in sand near sloping ground under inclined loading

    • Meshel Alkahtani
    • M. Hesham El Naggar
    • Osama Drbe

    Technical paper 19 April 2022 Article: 219

    

19. Investigating properties of concrete containing cationic bitumen emulsion

    • Venkata Veera Himakar Chunduri
    • Veerendrakumar C. Khed
    • Nura Bala

    State-of-the-art paper 19 April 2022 Article: 218

    

20. Size, length, temperature and loading range effects on deformation response of NiTi SMA wire: an analytical study

    • Sourabh Rajoriya
    • Shambhu Sharan Mishra

    Technical paper 18 April 2022 Article: 217

    

21. Liquefaction potential mapping of Newtown-Rajarhat area, Kolkata, India, using deterministic and reliability analysis

    • Srijani Sett
    • Kalyan Kumar Chattopadhyay

    Technical paper 16 April 2022 Article: 216

    

22. Machine learning-integrated 5D BIM informatics: building materials costs data classification and prototype development

    • Saeed Banihashemi
    • Saeed Khalili
    • Abdulwahed Fazeli

    Technical paper Open access 16 April 2022 Article: 215

    

23. Numerical analysis of the effect of internal and external stiffeners on the behavior of concrete-steel composite connections

    • Seyed Iman Ferdows

    Technical paper 13 April 2022 Article: 214

    

24. Nonlinear finite element modeling and experimental investigation of SFRC beams strengthened with GFRP laminate under static loading

    • L. K. Rex
    • P. N. Raghunath
    • K. Suguna

    Technical paper 13 April 2022 Article: 213

    

25. Finite element analysis of the shear performance of box-groove interface of ultra-high-performance concrete (UHPC)-normal strength concrete (NSC) composite girder

    • Abdulwarith Ibrahim Bibi Farouk
    • Jinsong Zhu
    • Gu Yuhui

    Technical paper 11 April 2022 Article: 212

    

26. Comparative life cycle assessment of pervious concrete production in Malaysia with natural and recycled aggregate

    • Aan Mohammad Nusrat Aman
    • Anurita Selvarajoo
    • Fang Yenn Teo

    Technical paper 08 April 2022 Article: 211

    

27. Mechanical and thermal properties of sustainable lightweight concrete containing raw buckwheat husk

    • Haijuan Duan
    • Ying Wang

    Technical paper 05 April 2022 Article: 210

    

28. A new procedure for analysis of ride quality in roads using multi-body dynamic simulation

    • Omid Rahmani
    • Hosein Ghasemzadeh Tehrani
    • Amir Saman Abdollahzadeh Nasiri

    Technical paper 05 April 2022 Article: 209

    

29. International perspective of concrete pumping for infrastructural projects and the way forward in developing countries

    • P. Ansuman
    • V. Jittin
    • A. Bahurudeen

    Technical note 05 April 2022 Article: 208

    

30. Evaluation of liquefaction potential using ground response analysis incorporating mohr–coulomb model

    • Mohd Firoj
    • Ashish Bahuguna

    Technical paper 05 April 2022 Article: 207

    

31. Behavior of strengthened reinforced concrete beams under different CFRP strips arrangement

    • Mourad Boutlikht
    • Noureddine Lahbari
    • Kamel Hebbache

    Technical paper 04 April 2022 Article: 206

    

32. Observer-based anti-windup robust PID controller for performance enhancement of damped outrigger structure

    • B. G. Kavyashree
    • Shantharam Patil
    • Vidya S. Rao

    Technical paper Open access 02 April 2022 Article: 205

    

33. Design and analysis of tunnel cross-passage openings: 3D finite element analysis versus 3D shell-spring approach

    • Nilan S. Jayasiri
    • Kuo Chieh Chao
    • Auttakit Asanprakit

    Technical paper 01 April 2022 Article: 204

    

34. Effect of vertical drains and preloading on the creep behavior of soft clay

    • Nader Ibrahim
    • Ayman L. Fayed
    • Mahmoud S. Hammad

    Technical paper 31 March 2022 Article: 203

    

35. Studying the effect of the state of floating cages on soil and sediment geochemistry in Al Hilla city

    • Ghayda Y. AL-Kindi
    • Husam A. Al-Haidri
    • Tariq Abed Hussain

    Technical paper 31 March 2022 Article: 202

    

36. Moment and shear estimations in steel girder highway bridges using committees of artificial neural networks and finite element models

    • Javed Ahmad Bhat

    Technical paper 31 March 2022 Article: 201

    

37. A program for inverse analysis of triaxial tests in consolidated drained condition using a genetic algorithm

    • Eduardo Souza Candido
    • José Carlos Lopes Ribeiro
    • Fernanda Aparecida Souza

    Technical paper 31 March 2022 Article: 200

    

38. A review on sustainable production of self-compacting concrete utilizing industrial by-products as cementitious materials

    • K. Nandhini
    • J. Karthikeyan

    Review 31 March 2022 Article: 199

    

39. Investigation of jarosite-cement blends for hydration process and mechanical behavior in PQC mixes

    • Surendra Kumar Saini
    • G. D. Ransinchung
    • Sonalisa Ray

    Technical paper 28 March 2022 Article: 198

    

40. Impact of recycled plastic aggregate concrete in high-temperature environments

    • Lalit B. Pawar
    • Keshav K. Sangle
    • Yuvraj L. Bhirud

    Technical paper 25 March 2022 Article: 197

    

41. An experimental study on properties of concrete incorporating colloidal nanosilica and alccofine

    • Aabid Hussain Bhat
    • Javed Ahmad Naqash

    Technical paper 25 March 2022 Article: 196

    

42. Numerical analysis of offshore topside with FGM under impact loads

    • S. Pachaiappan
    • S. Chandrasekaran

    Technical paper 25 March 2022 Article: 195

    

43. An accelerated carbonation and its effect on concrete containing natural zeolite

    • Akshay Ramesh Bura
    • B. Kondraivendhan

    Technical paper 24 March 2022 Article: 194

    

44. Simplified and practical lean approach towards sustainable infrastructure

    • Mohankumar Bajad

    State-of-the-art paper 22 March 2022 Article: 193

    

45. Application of SMA wire in vibration mitigation of bridge stay cable: a state-of-the-art review

    • Sourabh Rajoriya
    • Shambhu Sharan Mishra

    Review 22 March 2022 Article: 192

    

46. Study of the mechanical and microstructural properties of stone mastic asphalt containing Algerian date palm fibers: influence of the manufacturing process

    • Youcef Bellatrache
    • Layella Ziyani
    • Smail Haddadi

    Technical paper 21 March 2022 Article: 191

    

47. Methods and factors of prioritizing roads for maintenance: a review for sustainable flexible pavement maintenance program

    • Akhilesh Nautiyal
    • Sunil Sharma

    Review 21 March 2022 Article: 190

    

48. Hydraulic response of the Hippargi barrage and Almatti reservoir on the Krishna river and its tributaries, India

    • Hanumant Dhumal
    • Sunil B. Thakare
    • Prasad Rankhambe

    Technical paper 18 March 2022 Article: 189

    

49. Vibration-based pre-emptive detection of plate buckling using piezo-transducers

    • Sumedha Moharana
    • Suresh Bhalla
    • Sarvottam Munjwani

    Practice-oriented paper 18 March 2022 Article: 188

    

50. Importance–Performance Analysis to assess community role in solid waste management in the Hooghly District, West Bengal

    • Amit Kumar Das
    • Jenia Mukherjee
    • Uday Chatterjee

    Case study 18 March 2022 Article: 187