Articles

1. Powder spreading process monitoring of selective laser melting manufacturing by using a convolutional Takagi–Sugeno–Kang fuzzy neural network

   • Chun-Hui Lin
   • Cheng-Jian Lin
   • Shyh-Hau Wang

   ORIGINAL ARTICLE 27 April 2024

   

2. Multiparameter signal-to-noise ratio optimization for end milling cutting conditions of aluminium alloy 5083

   • John Kechagias

   ORIGINAL ARTICLE Open access 27 April 2024

   

3. A review on 3D measurement of highly reflective objects using structured light projection

   • Xinyue Zhao
   • Tiancheng Yu
   • Zaixing He

   Critical Review 27 April 2024

   

4. Numerical and experimental investigation on temperature field during small-module gear creep feed deep profile grinding

   • Jun Yi
   • Kanglin Pei
   • Hui Deng

   ORIGINAL ARTICLE 26 April 2024

   

5. Technical review on design optimization in forging

   • Satoshi Kitayama

   Critical Review Open access 26 April 2024

   

6. A review of 3D-printed bimetallic alloys

   • Mohammed Junaid Shekh
   • Lenissongui C. Yeo
   • Jacob L. Bair

   Critical Review 26 April 2024

   

7. A new machining test to identify position-independent geometric errors of rotary axes for five-axis machine tools

   • Kejian Chen
   • Sitong Xiang
   • Hainan Zhang

   ORIGINAL ARTICLE 26 April 2024

   

8. Exploiting image quality measure for automatic trajectory generation in robot-aided visual quality inspection

   • Atae Jafari-Tabrizi
   • Dieter P. Gruber
   • Andrej Gams

   ORIGINAL ARTICLE Open access 26 April 2024

   

9. Comparison of drilling and milling hole-forming mechanism of AFRP and experimental study of MQL

   • Lin Wang
   • Xiangbao Li
   • Liqiang Xiao

   ORIGINAL ARTICLE 26 April 2024

   

10. Experimental and numerical study on thin silicon wafer CO₂ laser cutting and damage investigation

    • Kaveh Moghadasi
    • Khairul Fikri Tamrin
    • Amir Azam Khan

    ORIGINAL ARTICLE 26 April 2024

    

11. Hybrid decision-making in atmospheric plasma spraying enables human–machine teaming

    • Franziska Bocklisch
    • Steffen F. Bocklisch
    • Shrikant Joshi

    ORIGINAL ARTICLE Open access 26 April 2024

    

12. Fabrication of the optical lens on single-crystal germanium surfaces using the laser-assisted diamond turning

    • Hanheng Du
    • Yidan Wang
    • Suet To

    ORIGINAL ARTICLE Open access 25 April 2024

    

13. Improving forming accuracy of variable-diameter tube by electromagnetic forming using segmented coil

    • Changxing Li
    • Xiaofei Xu
    • Liang Li

    ORIGINAL ARTICLE 25 April 2024

    

14. Research on surface integrity of TC4 titanium alloy by ultrasonic surface rolling peening

    • Yi Wang
    • Yanhou Liu
    • Jinguo Han

    ORIGINAL ARTICLE 25 April 2024

    

15. Dynamic modeling of thin-walled CFRP surface milling and the effect of chatter on surface quality

    • Fuji Wang
    • Jun Deng
    • Xing Ma

    ORIGINAL ARTICLE 25 April 2024

    

16. Axis path planning of five-axis surface machining by optimizing differential vector of the axis movement considering tool posture limits

    • Jiajing Li
    • Lei Lu
    • Zhenyu Wang

    ORIGINAL ARTICLE 25 April 2024

    

17. Flexural strength of the sandwich-structured parts made of polylactic-acid and thermoplastic-polyurethane fabricated by using extrusion-based multi-material additive manufacturing

    • Adam Zuyyinal Adib
    • Juan Pratama
    • Budi Arifvianto

    ORIGINAL ARTICLE 25 April 2024

    

18. Springback prediction using point series and deep learning

    • Yang Bingqian
    • Yuanyi Zeng
    • Anh Nguyen

    ORIGINAL ARTICLE Open access 25 April 2024

    

19. Ultrasonic testing in the field of engineering joining

    • Zongkai Fan
    • Keran Bai
    • Chao Chen

    Critical Review 25 April 2024

    

20. Industrially relevant injection moulding apparatus for in situ time-resolving small-angle X-ray scattering measurements

    • André A. Costa
    • Fábio Gameiro
    • Geoffrey R. Mitchell

    ORIGINAL ARTICLE Open access 25 April 2024

    

21. Nanosecond multi-passes laser surface texturing on AISI 301LN TRIP steel

    • Mohammad Rezayat
    • Mahmoud Moradi
    • Antonio Mateo

    Original Article 25 April 2024

    

22. Correction to: Integrated thermal error modeling and compensation of machine tool feed system using subtraction‑average‑based optimizer‑based CNN‑GRU neural network

    • Tongtong Yang
    • Xingwei Sun
    • Shibo Mu

    Correction 24 April 2024

    

23. A study on the mechanical and electrical performance of Al/Cu laser multi-seam welded joints

    • Hye-Seul Yoon
    • Young-Jin Eun
    • Hee-Seon Bang

    ORIGINAL ARTICLE 24 April 2024

    

24. Intermittent multivariate time series spindle thermal error prediction under wide environmental temperature ranges and diverse scenario conditions

    • Guangjie Jia
    • Xu Zhang
    • Nuodi Huang

    ORIGINAL ARTICLE 24 April 2024

    

25. Development of characteristic diagram for optimum energy and impact absorption of lattices

    • Mohammad Reza Vaziri Sereshk
    • Eric J. Faierson

    ORIGINAL ARTICLE 24 April 2024

    

26. Wire arc additive manufactured A36 steel performance for marine renewable energy systems

    • Hyein Choi
    • Jesse M. Adamczyk
    • Michael J. Heiden

    ORIGINAL ARTICLE 24 April 2024

    

27. Immune system inspired smart maintenance framework: tool wear monitoring use case

    • Terrin Pulikottil
    • Giovanna Martínez-Arellano
    • Jose Barata

    ORIGINAL ARTICLE Open access 24 April 2024

    

28. Steel surface roughness parameter prediction from laser reflection data using machine learning models

    • Alex Milne
    • Xianghua Xie

    ORIGINAL ARTICLE Open access 24 April 2024

    

29. Correction to: Effect of root pass removal procedures on mechanical and microstructural properties of shielded metal arc welded joints

    • Muhammad Saleem Khan
    • Muhammad Abas
    • Saif Ullah Khalid

    Correction 23 April 2024

    

30. Experimental and numerical investigation of the damage state of Ti-6Al-4V alloy sheet in the tensile test, hydraulic bulging, and hydroforming processes

    • Yusuf Furkan Yapan
    • Habip Gökay Korkmaz
    • Mevlüt Türköz

    ORIGINAL ARTICLE Open access 23 April 2024

    

31. Advancing human–robot collaboration in handcrafted manufacturing: cobot-assisted polishing design boosted by virtual reality and human-in-the-loop

    • Marianna Ciccarelli
    • Matteo Forlini
    • Michele Germani

    ORIGINAL ARTICLE Open access 23 April 2024

    

32. Finish dry turning of DC53 tool steel via modified carbide inserts: a study of machining dynamics

    • Sana Hassan
    • Sarmad Ali Khan
    • Muhammad Umar Farooq

    ORIGINAL ARTICLE 23 April 2024

    

33. Investigation of temperature distribution, microstructure evolution, and weld performance in stir friction welded joints of 6061 aluminum alloys

    • Zhaorui Wang
    • Linchu Yang
    • Jiacheng Yu

    ORIGINAL ARTICLE 23 April 2024

    

34. Surface evolution and subsurface damage mechanism in fixed abrasive lapping of Silicon carbide

    • Zhong-Chen Cao
    • Yang Zhang
    • Zhu Wang

    ORIGINAL ARTICLE 23 April 2024

    

35. Ball-end milling stability and force analysis in the presence of inclination angles through a new algorithm with numerical chip thickness in edge-workpiece engagement

    • Shuiyuan Wu
    • Dongju Chen
    • Yuhang Tang

    ORIGINAL ARTICLE 23 April 2024

    

36. Chatter detection in simulated machining data: a simple refined approach to vibration data

    • Matthew Alberts
    • Sam St. John
    • Jamie Coble

    ORIGINAL ARTICLE Open access 23 April 2024

    

37. Comparison of MRR of different WEDM-machined materials

    • Katerina Mouralova
    • Libor Benes
    • Jiri Fries

    ORIGINAL ARTICLE 22 April 2024

    

38. Effect of mold dwell time on shrinkage defects in investment casting of superalloy turbine blade

    • Daiyin Zhao
    • Donghong Wang
    • Baode Sun

    ORIGINAL ARTICLE 22 April 2024

    

39. Study on magnetohydrodynamic internal cooling mechanism within an aluminium oxide cutting tool

    • John O’Hara
    • Fengzhou Fang

    ORIGINAL ARTICLE Open access 22 April 2024

    

40. Analytical approach to investigate the effects of through-thickness stress on springback in bending of isotropic sheet metal

    • Mohammad Reza Movahedi
    • Mahdi Gerdooei

    Original Article 22 April 2024

    

41. Numerical analysis of static and dynamic heat source model approaches in laser micro spot welding

    • Rigoberto Guzmán-Nogales
    • Erika García-López
    • Alex Elías-Zúñiga

    ORIGINAL ARTICLE 22 April 2024

    

42. Box-Behnken modeling to optimize the engineering response and the energy expenditure in material extrusion additive manufacturing of short carbon fiber reinforced polyamide 6

    • Markos Petousis
    • Mariza Spiridaki
    • Nectarios Vidakis

    ORIGINAL ARTICLE Open access 20 April 2024

    

43. Investigations on material removal mechanism during laser-assisted grinding silicon nitride ceramics

    • Zishan Ding
    • Yikang Teng
    • Steven Y Liang

    ORIGINAL ARTICLE 20 April 2024

    

44. Innovative approaches to eco-friendly precision grinding of VP50 steel

    • Matheus de Souza Rodrigues
    • Guilherme Guerra de Souza
    • José Claudio Lopes

    ORIGINAL ARTICLE 20 April 2024

    

45. Material removal model of magnetoelastic abrasive particles in dual-disk magnetic cutting edge preparation

    • Hongxin Wu
    • Xuefeng Zhao
    • Yong Liu

    ORIGINAL ARTICLE 20 April 2024

    

46. Review of defects and their sources in as-built Ti6Al4V manufactured via powder bed fusion

    • Rodolfo Villa
    • Yingtao Liu
    • Zahed Siddique

    Critical Review 20 April 2024

    

47. Investigating corrosion resistance in Ni–Al₂O₃ composite coatings: a fuzzy logic-based predictive study

    • Imane Rezgui
    • Abderrahim Belloufi
    • Mourad Abdelkrim

    ORIGINAL ARTICLE 20 April 2024

    

48. Unified plastic limit analysis of the cap periphery formation in orbital drilling of titanium alloy

    • Lan Zhou
    • Yun Zhong
    • Zongxiao Zhu

    ORIGINAL ARTICLE 19 April 2024

    

49. Study on the relationship between interface morphology and mechanical properties of explosive welded titanium/duplex stainless steel

    • Minjing Wang
    • Jianian Hu
    • Zhen Chen

    ORIGINAL ARTICLE 19 April 2024

    

50. Influence of micro-textured polycrystalline diamond tools on the machining performance of titanium alloy Ti-6Al-4V in dry turning

    • Ramaswamy Palanivel
    • Isaac Dinaharan
    • Haitham M Alswat

    ORIGINAL ARTICLE 19 April 2024