Skip to main content
SpringerLink
Log in

An experimental investigation on the durability of railway ballast material by magnesium sulfate soundness

  • Original Paper
  • Published:
Granular Matter Aims and scope Submit manuscript

Abstract

In this study, the durability of railway ballast material is investigated by magnesium sulfate soundness tests. Two types of ballast aggregates, which are produced from basaltic rocks and currently used as railway ballast in such high speed railway routes in Turkey, are investigated regarding their resistance against freezing–thawing (FT) and traffic loads. Firstly, the mineralogical and physico-mechanical properties of rocks are determined. Then the degradation of investigated ballast aggregates is determined by magnesium sulfate soundness and Los Angeles abrasion (LAA) tests. The natural FT effects are simulated by magnesium sulfate soundness tests up to 40 cycles, whereas the traffic loads are represented by LAA tests up to 3000 revolutions. The ballast fouling that leads to such problems are also investigated within the scope in the present study. The degree of ballast fouling is quantified as fouling index (FI) which is determined using the crushed particles generated after LAA tests. It is concluded from laboratory studies that rock properties considered are considerably influenced by simulated FT cycles. It is also achieved from the laboratory studies that magnesium sulfate soundness and Los Angeles abrasion tests are good indicators to clarify the fragmentation mechanism of the ballast aggregate in laboratory scale. In conclusion several empirical formulas are developed to predict LAA and FI for each rock type. The proposed empirical formulas could be utilized as a pre-design tool for new railway routes in design stage provided that the investigated ballast aggregates are considered.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1

(Modified after [5])

Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. UIC/ETF Rail Transport and Environment: Facts and Figures. Paris, p. 68 (2015)

  2. Profillidis, V.A.: Railway Management and Engineering, 4th edn. Ashgate Publishing, Aldershot (2014)

    Google Scholar 

  3. Li, D., Hyslip, J., Sussmann, T., Chrismer, S.: Railway Geotechnics. CRC Press, Boca Raton (2016)

    Google Scholar 

  4. Knutson, R.M., Thompson, M.R.: Permanent-deformation behavior of railway ballast. Transp. Res. Rec. 694, 47–53 (1978)

    Google Scholar 

  5. Selig, E.T., Waters, J.M.: Track Geotechnology and Substructure Management. Thomas Telford Services Ltd., London (1994)

    Book  Google Scholar 

  6. Li, D., Selig, E. T.: Evaluation of Railway Subgrade Problems. Transp. Res. Rec. 1489. National Research Council, Washington, DC, pp. 17–25 (1995)

  7. Feldman, F., Nissen, D.: Alternative testing method for the measurement of ballast fouling: percentage void contamination. In: Proceedings of the Conference on Railway Engineering, Wollongong, Australia. Railway Technical Society of Australia, Canberra, Australia, pp. 101–109 (2002)

  8. Al-Qadi, I., Xie, W., Roberts, R.: Scattering analysis of ground-penetrating radar data to quantify railroad ballast contamination. NDT E Int. 41(6), 441–447 (2008). https://doi.org/10.1016/j.ndteint.2008.03.004

    Article  Google Scholar 

  9. Dombrow, W., Huang, H., Tutumluer, E.: Comparison of coal dust fouled railroad ballast behavior—granite versus limestone. In: Bearing Capacity of Roads, Railways and Airfields, Proceedings of 8th International Conference (BCR2A’09). Taylor & Francis, London, pp. 1349–1357 (2009)

  10. Paiva, C., Ferreira, M., Ferreira, A.: Ballast drainage in Brazilian railway infrastructures. Constr. Build. Mater. 92, 58–63 (2015). https://doi.org/10.1016/j.conbuildmat.2014.06.006

    Article  Google Scholar 

  11. Lakušic, S., Ahac, M., Haladin, I.: Experimental investigation of railway track with under sleeper pad. In: 10th Slovenian Road Transp. Cong. Portoroz, Slovenija, pp. 386–393 (2010)

  12. Koohmishi, M., Palassi, M.: Evaluation of the strength of railway ballast using point load test for various size fractions and particle shapes. Rock Mech. Rock Eng. 49, 2655–2664 (2016). https://doi.org/10.1007/s00603-016-0914-3

    Article  ADS  Google Scholar 

  13. Köken, E., Özarslan, A.: Development of proposals for utilization of point load strength to estimate the strength of ballast material. In: 8th International, Agg. Symp, Kutahya, Turkey, pp. 73–83 (2016)

  14. Aursudkij, B.: A laboratory study of railway ballast behaviour under traffic loading and tamping maintenance. Ph.D. Thesis (unpublished), University of Nottingham, p. 215 (2007)

  15. Rangaraju, P.R., Edlinski, J.: Comparative evaluation of micro-deval abrasion test with other toughness/abrasion resistance and soundness tests. J. Mater. Civ. Eng. 20(5), 343–351 (2008). https://doi.org/10.1061/(ASCE)0899-1561(2008)20:5(343)

    Article  Google Scholar 

  16. Han, X., Selig, E.T.: Effects of fouling on ballast settlement. In: Proceedings of 6th International Heavy Haul Railway Conference, Cape Town, South Africa, pp. 257–268 (1997)

  17. Moaveni, M., Qian, Y.H., Boler, H. Mishra, D., Tutumluer E.: Investigation of ballast degradation and fouling trends using image analysis. In: Proceedings of 2nd International Conference on Railway Tech. Res. Develop. Main. (Pombo, J. (ed.)). Civil-Comp Press, Stirlingshire, UK, Paper 123 (2014). https://doi.org/10.4203/ccp.104.123

  18. Koohmishi, M., Palassi, M.: Effect of particle size distribution and subgrade condition on degradation of railway ballast under impact loads. Granul. Matter 19, 63 (2017). https://doi.org/10.1007/s10035-017-0747-0

    Article  Google Scholar 

  19. Wnek, M.: Investigation of aggregate properties influencing railroad ballast performance. M.Sc. thesis (unpublished) in Civil Engineering, University of Illinois, p. 235 (2013)

  20. Qian, Y., Boler, H., Moaveni, M., Tutumluer, E., Hashash, Y.M.A., Ghaboussi, J.: Characterizing ballast degradation through Los Angeles abrasion test and image analysis. Transp. Res. Rec. 2448, 126–135 (2014)

    Article  Google Scholar 

  21. Huang, H., Tutumluer, E., Dombrow, W.: Laboratory characterization of fouled railroad ballast behavior. Transp. Res. Rec. 2117, 93–101 (2009). https://doi.org/10.3141/2117-12

    Article  Google Scholar 

  22. Parsons,R., Rahman, A.J., Han, J.: Properties of fouled railroad ballast (Phase 1), Final report (Report no: 25-1121-0001-465), Mid-America, Transp. Center, p. 55 (2012)

  23. Tennakoon, N., Indraratna, B., Rujikiatkamjorn, C., Nimbalkar, S., Neville, T.: The role of ballast fouling characteristics on the drainage capacity of rail substructure. Geotech. Test. J. 35(4), 629–640 (2012). https://doi.org/10.1520/GTJ104107

    Article  Google Scholar 

  24. ISRM: The complete ISRM suggested methods for rock characterization, testing and monitoring: 1974–2006. In: Ulusay R, Hudson JA (eds) Suggested methods prepared by the commission on testing methods. Int. Soc. Rock Mech. (ISRM), Ankara, Turkey (2007)

  25. TS EN 1097-6: Tests for mechanical and physical properties of aggregates—Part 6: determination of particle density and water absorption, p. 51 (2013)

  26. TS EN 1097-2: Tests for mechanical and physical properties of aggregates—Part 2: methods for the determination of resistance to fragmentation, p. 36 (2010)

  27. TS EN 1367-2: Tests for thermal and weathering properties of aggregates. Magnesium sulfate test, p. 8 (2009)

  28. Anon: Classification of rocks and soils for engineering geological mapping, Part 1: rock and soil materials. Bull. Int. Eng. Geol. 19, 364–371 (1979)

  29. Bieniawski, Z.T.: The point load test in geotechnical practice. Eng. Geol. 9, 1–11 (1975)

    Article  Google Scholar 

  30. BS EN 13450: Aggregates for railway ballast, p. 38 (2002)

Download references

Acknowledgements

The authors gratefully acknowledge and appreciate the constructive comments and suggestions of the reviewers and the financial support (Project No: 2016-98150330-01) provided by Bülent Ecevit University.

Author information

Authors and Affiliations

  1. Mining Engineering Department, Bulent Ecevit University, Zonguldak, Turkey

    Ekin Köken & Ahmet Özarslan

  2. Geological Engineering Department, Bulent Ecevit University, Zonguldak, Turkey

    Gürkan Bacak

Authors
  1. Ekin Köken
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Ahmet Özarslan
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Gürkan Bacak
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Ekin Köken.

Ethics declarations

Conflict of interest

The authors declare that they have no conflict of interest.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Köken, E., Özarslan, A. & Bacak, G. An experimental investigation on the durability of railway ballast material by magnesium sulfate soundness. Granular Matter 20, 29 (2018). https://doi.org/10.1007/s10035-018-0804-3

Download citation

  • Received:

  • Published:

  • DOI: https://doi.org/10.1007/s10035-018-0804-3

Keywords

Search

Navigation