Abstract
Atmospheric pressure plasma (APP) treatment was applied as a pretreatment process to enhance the deposition of printing paste in order to improve the final colour properties of digital ink-jet printed cotton fabrics. Three printing pastes containing natural polymers, i.e. (1) sodium alginate, (2) chitosan and (3) sodium alginate-chitosan mixture, were prepared separately. After APP treatment, cotton fabric was padded with different printing pastes prior to digital ink-jet printing. Experimental results showed that APP pretreatment could increase the colour yield of the digital ink-jet printed cotton fabric significantly even after washing. In addition, other properties such as colour fastness to crocking, colour fastness to laundering, outline sharpness and anti-bacterial properties were also improved when compared with those of the control cotton fabric printed without APP pretreatment. However, the influence of printing paste on the colour properties of the digital ink-jet printed cotton fabrics depended very much on the composition of the printing paste. The scanning electron microscope images evidenced that the APP treatment could enhance the deposition of printing paste on the cotton fabric surface as proved qualitatively by both the contact angle and wetting time measurement as well as quantitatively by both the X-ray photoelectron spectroscopy and carboxyl group/nitrogen content analysis.
Similar content being viewed by others
References
Achwal WB (2002) Textile chemical principles of digital textile printing (DTP). Colourage 49(12):33–34
Aston SO, Provost JR, Masselink H (1997) Jet printing with reactive dyes. J Soc Dyers Colour 109(4):147–152
Bird EW, Weber J, Cox CP, Chen TC (1961) Determination of calcium and magnesium in milk by EDTA titration. J Dairy Sci 44:1036–1046
Chen W, Wang G, Bai Y (2002) Best for wool fabric printing—digital inkjet. Text Asia 33(12):37–39
Chiou MS, Ho PY, Li HY (2004) Adsorption of anionic dyes in acid solutions using chemically cross-linked bead. Dyes Pigm 60(1):69–84
Choi PSR, Yuen CWM, Ku SKA, Kan CW (2005) Digital ink-jet printing for chitosan-treated cotton fabric. Fibers Polym 6(3):229–234
De Geyter N, Morent R, Leys C (2008) Pressure dependence of helium DBD plasma penetration into textile layers. IEEE Trans Plasma Sci 36(4):1308–1309
Fras Zemljic L, Persin Z, Stenius P, Stana Kleinschek K (2008) Carboxyl groups in pre-treated regenerated cellulose fibres. Cellulose 15:681–690
Fras Zemljic L, Persin Z, Stenius P (2009) Improvement of chitosan adsorption onto cellulosic fabrics by plasma treatment. Biomacromolecules 10:1181–1187
Fras L, Stana Kleinschek K, Ribitsch V, Sfiligoj-Smole M, Kreze T (2002) Quantitative determination of carboxyl groups in cellulose by complexometric titration. Lenzinger Berichte 81:80–88
Fras L, Johansson LS, Stenius P, Laine J, Stana-Kleinschek K, Ribitsch V (2005) Analysis of the oxidation of cellulose fibres by titration and XPS. Colloids Surf A Physicochem Eng Asp 260:101–108
Gupta S (2001) Ink-jet printing—a revolutionary ecofriendly technique for textile printing. Indian J Fibre Text Res 26(1&2):156–161
Inbakumar S, Morent R, De Geyter N, Desmet T, Anukaliani A, Dubruel P, Leys C (2010) Chemical and physical analysis of cotton fabrics plasma-treated with a low pressure DC glow discharge. Cellulose 17:417–426
Jocic D, Vilchez S, Topalovic T, Navarro A, Jovancic P, Julia MR, Erra P (2005) Chitosan/acid dye interactions in wool dyeing system. Carbohydr Polym 60(1):51–59
Kan CW, Yuen CWM (2009) Influence of plasma gas on the quality-related properties of wool fabric. IEEE Trans Plasma Sci 37(5):653–658
Lam YL, Kan CW, Yuen CWM (2011) Physical and chemical analysis of plasma-treated cotton fabric subjected to wrinkle-resistant finishing. Cellulose (accepted)
Le HP (1998) Progress and trends in ink-jet printing technology—part 2. J Imaging Sci Technol 41(1):49–62
Lim SH, Hudson SM (2004) Application of a fibre-reactive chitosan derivative to cotton fabric as an antimicrobial textile finish. Carbohydr Polym 56(2):227–234
Morent R, De Geyter N, Verschuren J, Clerck K, Kiekens P, Leys C (2008) Non-thermal plasma treatment of textiles. Surf Coat Technol 202:3427–3449
Qin Y (2004) Novel antimicrobial fibres. Text Mag 31(2):14–17
Schulz G (2002) Textile chemistry of digital printing. Melliand Texilberichte/Int Text Rep (Eng Ed) 83(3):E30–E32
Shahidi S, Rashidi A, Ghoranneviss M, Anvari A, Rahimi MK, Bameni Moghaddam M, Wiener J (2010) Investigation of metal absorption and antibacterial activity on cotton fabric modified by low temperature plasma. Cellulose 17:627–634
Shateri Khalil-Abad M, Yazdanshenas ME, Nateghi MR (2009) Effect of cationization on adsorption of silver nanoparticles on cotton surfaces and its antibacterial activity. Cellulose 16:1147–1157
Shenton MJ, Stevens GC (2001) Surface modification of polymer surfaces: atmospheric plasma versus vacuum plasma treatments. J Phys D Appl Phys 34:2761–2768
Shin Y, Yoo DI, Jang J (2001) Molecular weight effect on antimicrobial activity of chitosan treated cotton fabrics. J Appl Polym Sci 80:2495–2501
Sun D, Stylios GK (2005) Investigating the plasma modification of natural fiber fabrics-the effect on fabric surface and mechanical properties. Text Res J 75:639–644
Tyler DJ (2005) Textile digital printing technologies. Text Progr 37(4):1–64
van Parys M (2002) The future of printing will be digital. Melliand Textilberichte/Int Text Rep (Eng Ed) 83(6):E96
Wang CX, Qiu YP (2007) Two sided modification of wool fabrics by atmospheric pressure plasma jet: influence of processing parameters on plasma penetration. Surf Coat Technol 201:6273–6277
Wang CX, Liu Y, Xu HL, Ren Y, Qiu YP (2005) Influence of atmospheric pressure plasma treatment time on penetration depth of surface modification into fabric. Surf Coat Technol 254(8):2499–2505
Wong KK, Tao XM, Yuen CWM, Yeung KW (1999) Low temperature plasma treatment of linen. Text Res J 69:846–855
Ye W, Leung MF, Xin J, Kwong TL, Lee DKL, Li P (2005) Novel core-shell particles with poly (n-butyl acrylate) cores and chitosan shells as an antibacterial coating for textile. Polymer 46(3):10538–10543
Yuen CWM, Kan CW (2007) A study of the properties of ink-jet printed cotton fabric following low-temperature plasma treatment. Color Technol 123:96–100
Yuen CWM, Ku SKA, Choi PS, Kan CW (2004) The effect of the pretreatment print paste contents on colour yield of an ink-jet printed cotton fabric. Fibers Polym 5(2):117–121
Yuen CWM, Ku SKA, Choi PSR, Kan CW, Tsang SY (2005) Determining functional groups of commercially available ink-jet printing reactive dyes using infrared spectroscopy. Res J Text Appar 9(2):26–38
Yuen CWM, Ku SKA, Kan CW, Choi PS (2007) Enhancing textile ink-jet printing with chitosan. Color Technol 123:267–270
Zhang C, Fang K (2009) Surface modification of polyester fabrics for ink-jet printing with atmospheric-pressure air/Ar plasma. Surf Coat Technol 203:2058–2063
Zhou X, Li Y (2002) Inkjet printing: the easy way to produce textile sample. Int Text Bull 48(3):64–66
Acknowledgments
The work described in this paper was supported by a grant obtained from the Research Grants Council of The Hong Kong Special Administrative Region, China (Project No. PolyU 5192/08E) and a research grant obtained from The Hong Kong Polytechnic University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kan, C.W., Yuen, C.W.M. & Tsoi, W.Y. Using atmospheric pressure plasma for enhancing the deposition of printing paste on cotton fabric for digital ink-jet printing. Cellulose 18, 827–839 (2011). https://doi.org/10.1007/s10570-011-9522-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10570-011-9522-2