Collection
Special Issue: Selected and Expanded Papers from the 2015 International Conference (ITSC 2015)
- Submission status
- Closed
Special Issue published in January 2016, Vol. 25, No. 1-2 of Journal of Thermal Spray Technology
Editors
-
Armelle Vardelle
University of Limoges, France
-
Kantesh Balani
Indian Institute of Technology Kanpur, India
-
Giovanni Bolelli
University of Modena and Reggio Emilia, Italy
-
Yuk-Chiu Lau
GE Power and Water (retired), USA
-
André McDonald
University of Alberta, Canada
-
Filofteia-Laura Toma
Fraunhofer Institute—IWS, Germany
-
Erja Turunen
VTT Technical Research Centre of Finland, Finland
-
Christian Widener
South Dakota School of Mines and Technology, USA
Articles (40 in this collection)
-
-
La2NiO4+δ Infiltration of Plasma-Sprayed LSCF Coating for Cathode Performance Improvement
Authors (first, second and last of 7)
- Ying Li
- Shan-Lin Zhang
- Meilin Liu
- Content type: Peer Reviewed
- Published: 18 December 2015
- Pages: 392 - 400
-
Application of High-Pressure Cold Spray for an Internal Bore Repair of a Navy Valve Actuator
Authors (first, second and last of 8)
- C. A. Widener
- M. J. Carter
- T. J. Eden
- Content type: Peer Reviewed
- Published: 15 December 2015
- Pages: 193 - 201
-
Hybrid Co-Cr/W-WC and Ni-W-Cr-B/W-WC Coating Systems
Authors (first, second and last of 6)
- L. Vernhes
- M. Azzi
- J. E. Klemberg-Sapieha
- Content type: Peer Reviewed
- Published: 09 December 2015
- Pages: 346 - 356
-
YSZ-Polyester Abradable Coatings Manufactured by APS
Authors (first, second and last of 7)
- Delphine Aussavy
- Rodolphe Bolot
- Serge Selezneff
- Content type: Peer Reviewed
- Published: 01 December 2015
- Pages: 252 - 263
-
Al2O3/Al Cermets by Plasma Spraying: Optical Response of Experimental and Numerically Represented Materials
Authors (first, second and last of 8)
- D. Toru
- R. Echegut
- L. Bianchi
- Content type: Peer Reviewed
- Published: 23 November 2015
- Pages: 384 - 391
-
Influence of Microstructure on Thermal Properties of Axial Suspension Plasma-Sprayed YSZ Thermal Barrier Coatings
Authors (first, second and last of 7)
- Ashish Ganvir
- Nicholas Curry
- Zdenek Pala
- Content type: Peer Reviewed
- Published: 23 November 2015
- Pages: 202 - 212
-
Plasma-Sprayed Thermal Barrier Coatings with Enhanced Splat Bonding for CMAS and Corrosion Protection
Authors (first, second and last of 6)
- Tao Liu
- Shu-Wei Yao
- Chang-Jiu Li
- Content type: Peer Reviewed
- Published: 16 November 2015
- Pages: 213 - 221
-
The Microstructure Stability of Atmospheric Plasma-Sprayed MnCo2O4 Coating Under Dual-Atmosphere (H2/Air) Exposure
Authors (first, second and last of 6)
- Ying-Zhen Hu
- Cheng-Xin Li
- Chang-Jiu Li
- Content type: Peer Reviewed
- Published: 09 November 2015
- Pages: 301 - 310
-
Effect of Substrate and Its Shape on in-Flight Particle Characteristics in Suspension Plasma Spraying
Authors
- K. Pourang
- C. Moreau
- A. Dolatabadi
- Content type: Peer Reviewed
- Published: 09 November 2015
- Pages: 44 - 54
-
High Heat Insulating Thermal Barrier Coating Designed with Large Two-Dimensional Inter-lamellar Pores
Authors (first, second and last of 6)
- Tao Liu
- Shan-Lin Zhang
- Chang-Jiu Li
- Content type: Peer Reviewed
- Published: 09 November 2015
- Pages: 222 - 230
-
Controlling the Twin Wire Arc Spray Process Using Artificial Neural Networks (ANN)
Authors (first, second and last of 4)
- K. Hartz-Behrend
- J. Schaup
- J. Schein
- Content type: Peer Reviewed
- Published: 03 November 2015
- Pages: 21 - 27
-
Modular Coating for Flexible Gas Turbine Operation
Authors (first, second and last of 6)
- J. R. A. Zimmermann
- J. C. Schab
- C. Leyens
- Content type: Peer Reviewed
- Published: 03 November 2015
- Pages: 273 - 281
-
Multi-Scale-Structured Composite Coatings by Plasma-Transferred Arc for Nuclear Applications
Authors (first, second and last of 6)
- A. Werry
- C. Chazelas
- E. Meillot
- Content type: Peer Reviewed
- Published: 03 November 2015
- Pages: 375 - 383
-
A Novel Plasma-Sprayed Nanostructured Coating with Agglomerated-Unsintered Feedstock
Authors (first, second and last of 4)
- Yang Gao
- Yan Zhao
- Jianyi Gao
- Content type: Peer Reviewed
- Published: 03 November 2015
- Pages: 291 - 300
-
Mechanistic Study and Characterization of Cold-Sprayed Ultra-High Molecular Weight Polyethylene-Nano-ceramic Composite Coating
Authors (first, second and last of 6)
- Kesavan Ravi
- Yuji Ichikawa
- Jean-Yves Cavaille
- Content type: Peer Reviewed
- Published: 27 October 2015
- Pages: 160 - 169
-
Parametric Study of Plasma Torch Operation Using a MHD Model Coupling the Arc and Electrodes
Authors
- M. Alaya
- C. Chazelas
- A. Vardelle
- Content type: Peer Reviewed
- Published: 27 October 2015
- Pages: 36 - 43
-
Mechanization of the Grit Blasting Process for Thermal Spray Coating Applications: A Parameter Study
Authors
- Henry Begg
- Melissa Riley
- Heidi de Villiers Lovelock
- Content type: Peer Reviewed
- Published: 23 October 2015
- Pages: 12 - 20
-
Fatigue Crack Growth in Bodies with Thermally Sprayed Coating
Authors (first, second and last of 8)
- O. KovářÃk
- P. Haušild
- S. Björklund
- Content type: Peer Reviewed
- Published: 22 October 2015
- Pages: 311 - 320
-
Development of Processing Windows for HVOF Carbide-Based Coatings
Authors (first, second and last of 4)
- Andrew Siao Ming Ang
- Hugo Howse
- Christopher C. Berndt
- Content type: Peer Reviewed
- Published: 20 October 2015
- Pages: 28 - 35
-
Wear and Corrosion Resistance of Fe-Based Coatings Reinforced by TiC Particles for Application in Hydraulic Systems
Authors (first, second and last of 4)
- K. Bobzin
- M. Öte
- K. M. Malik
- Content type: Peer Reviewed
- Published: 20 October 2015
- Pages: 365 - 374
-
Fatigue Performance of TBCs on Hastelloy X Substrate During Cyclic Bending
Authors (first, second and last of 10)
- Radek Musalek
- Ondrej Kovarik
- Stefan Bjorklund
- Content type: Peer Reviewed
- Published: 20 October 2015
- Pages: 231 - 243
-
RETRACTED ARTICLE: Structure and Mechanical Properties of Thick Copper Coating Made by Cold Spray
Authors (first, second and last of 6)
- R. Gr. Maev
- V. Leshchynsky
- E. Maeva
- Content type: Peer Reviewed
- Published: 25 September 2015
- Pages: 113 - 122
-
Thermal Gradient Behavior of TBCs Subjected to a Laser Gradient Test Rig: Simulating an Air-to-Air Combat Flight
Authors
- Rogerio S. Lima
- Basil R. Marple
- P. Marcoux
- Content type: Peer Reviewed
- Published: 25 September 2015
- Pages: 282 - 290
-
Effect of Substrate Preheating on Adhesive Strength of SS 316L Cold Spray Coatings
Authors (first, second and last of 6)
- Yingchun Xie
- Marie-Pierre Planche
- Philippe Hervé
- Content type: Peer Reviewed
- Published: 24 September 2015
- Pages: 123 - 130
-
Advanced Microscopic Study of Suspension Plasma-Sprayed Zirconia Coatings with Different Microstructures
Authors (first, second and last of 5)
- Paweł Sokołowski
- Lech Pawłowski
- David Jech
- Content type: Peer Reviewed
- Open Access
- Published: 24 September 2015
- Pages: 94 - 104
-
Joining of Cast ZE41A Mg to Wrought 6061 Al by the Cold Spray Process and Friction Stir Welding
Authors (first, second and last of 6)
- Victor Kenneth Champagne III
- Michael K. West
- Baillie McNally
- Content type: Peer Reviewed
- Published: 24 September 2015
- Pages: 143 - 159
-
Residual Stress Analysis of Cold-Sprayed Copper Coatings by Numerical Simulation
Authors (first, second and last of 4)
- Wenya Li
- Kang Yang
- Xianglin Zhou
- Content type: Peer Reviewed
- Published: 22 September 2015
- Pages: 131 - 142
-
Room Temperature Deformation Mechanisms of Alumina Particles Observed from In Situ Micro-compression and Atomistic Simulations
Authors (first, second and last of 9)
- Pylin Sarobol
- Michael Chandross
- Aaron C. Hall
- Content type: Peer Reviewed
- Published: 22 September 2015
- Pages: 82 - 93
-
Effect of Residual Stress on the Wear Resistance of Thermal Spray Coatings
Authors
- W. Luo
- U. Selvadurai
- W. Tillmann
- Content type: Peer Reviewed
- Published: 22 September 2015
- Pages: 321 - 330
-
A Method for Mechanical Characterization of Cold Spray Sputter Targets in PV Manufacturing
Authors
- Johannes Vlcek
- Kedar Hardikar
- Daniel R. Juliano
- Content type: Peer Reviewed
- Published: 10 September 2015
- Pages: 183 - 192
-
The Effect of Heat Treatment on Mechanical Properties of Thermally Sprayed Sandwich Structure Beams
Authors
- Saeid Salavati
- Thomas W. Coyle
- Javad Mostaghimi
- Content type: Peer Reviewed
- Published: 04 September 2015
- Pages: 105 - 112
-
Influence of Process Parameter on Grit Blasting as a Pretreatment Process for Thermal Spraying
Authors (first, second and last of 5)
- K. Bobzin
- M. Öte
- X. Liao
- Content type: Peer Reviewed
- Published: 04 September 2015
- Pages: 3 - 11
-
A Continuous β-NiAl Layer Forming at the Interface of a MCrAlY and CMSX-4
Authors
- Kang Yuan
- Ru Lin Peng
- Xin-Hai Li
- Content type: Peer Reviewed
- Published: 03 September 2015
- Pages: 244 - 251
-
Microstructure and Properties of Porous Abradable Alumina Coatings Flame-Sprayed with Semi-molten Particles
Authors (first, second and last of 5)
- Chang-Jiu Li
- Jiao Zou
- Guan-Jun Yang
- Content type: Peer Reviewed
- Published: 03 September 2015
- Pages: 264 - 272
-
Studies of Splat Formation of Copper and Copper Aluminium on Ceramic Substrate in Plasma Spray Process
Authors (first, second and last of 4)
- A. T. T. Tran
- M. M. Hyland
- P. Munroe
- Content type: Peer Reviewed
- Published: 03 September 2015
- Pages: 55 - 70
-
Tribological Properties of Hard Metal Coatings Sprayed by High-Velocity Air Fuel Process
Authors (first, second and last of 7)
- C. Lyphout
- K. Sato
- P. Sassatelli
- Content type: Peer Reviewed
- Published: 26 August 2015
- Pages: 331 - 345
-
Lithium Iron Phosphate Powders and Coatings Obtained by Means of Inductively Coupled Thermal Plasma
Authors
- K. Major
- J. Veilleux
- G. Brisard
- Content type: Peer Reviewed
- Published: 22 August 2015
- Pages: 357 - 364
-
Effect of Substrates Temperatures on the Spreading Behavior of Plasma-Sprayed Ni and Ni-20 wt.% Cr Splats
Authors (first, second and last of 4)
- Yongang Zhang
- Margaret Hyland
- Steven Matthews
- Content type: Peer Reviewed
- Published: 15 July 2015
- Pages: 71 - 81
-
Pyramidal Fin Arrays Performance Using Streamwise Anisotropic Materials by Cold Spray Additive Manufacturing
Authors (first, second and last of 4)
- Yannick Cormier
- Philippe Dupuis
- Antoine Corbeil
- Content type: Peer Reviewed
- Published: 03 July 2015
- Pages: 170 - 182