Abstract
Objective
The treatment of plant tissue with Agrobacterium tumefaciens is often a critical first step to both stable and transient plant transformation. In both applications bacterial suspensions are oftentimes physically introduced into plant tissues using hand-driven pressure from a needleless syringe. While effective, this approach has several drawbacks that limit reproducibility. Pressure must be provided with the syringe perfectly perpendicular to the tissue surface. The researcher must also attempt to provide even and consistent pressure, both within and between experimental replicates. These factors mean that the procedures do not always translate well between research groups or biological replicates.
Results
We have devised a method to introduce Agrobacterium suspensions into plant leaves with greater reproducibility. Using a decommissioned dissecting microscope as an armature, a syringe body with the bacterial suspension is mounted to the nosepiece. Gentle, even pressure is applied by rotating the focus knob. The treatment force is measured using a basic kitchen scale. The development of the Standardized Pressure Agrobacterium Infiltration Device (SPAID) provides a means to deliver consistent amounts of bacterial suspensions into plant tissues with the goal of increasing reproducibility between replicates and laboratories.
Introduction
The ability to introduce Agrobacterium tumefaciens cells into plant tissues the cornerstone of many transient [1,2,3,4,5] and stable [6] transformation procedures. Agrobacterium executes a genetic exchange with the plant cell it infects, enabling the plant cell, and by extension any tissues arising from it, to express the gene(s) introduced. Agrobacterium-mediated transformation protocols require incubation of plant tissues with bacterial suspensions. The process has been optimized using several methods, including floral dipping [7,8,9], vacuum infiltration [10], sonication [11, 12] air brushes [13], or introduction of bacteria by forcing suspensions into leaves under pressure.
Transient expression in plants like N. benthamiana is a useful way to test the activity of promoters [14], localization [15], or interacting partners [16] for a given protein. This system also allows production of industrial proteins [17, 18] or the effect of a specific introduced gene on a transcriptome [19]. Agrobacterium suspensions are typically introduced using a needleless syringe, the aperture pressed against the abaxial leaf surface and then pressure applied by hand [20]. Successful introduction leads to a media-soaked lesion. The bacteria perform their genetic exchange and express the protein of interest. While crude, the method is effective.
However, as transient assays attempt to resolve more sophisticated questions, the crude ‘push-n-pray’ methods could benefit from standardization. The current protocols have several limitations. A failure to make perfect perpendicular contact between the syringe tip and the leaf surface leads to variation between infiltration events. Too much pressure also can cause physical damage to the leaf surface that can affect results and permit introduction of other pathogens. Whether the end goal is transient expression or stable transformation, a method providing consistent introduction of bacterial suspensions may be helpful.
In this report we describe the Standardized Pressure Agrobacterium Infiltration Device (SPAID). The mechanism is a simple modification of a defunct dissecting microscope used in tandem with an analytical balance. The microscope nosepiece is fit with a permanent syringe plunger (Fig. 1), and bacterial suspensions are loaded into a sterile syringe body. Rotation of the focus knob allows for precise contact and pressure with the leaf surface. This instrument provides a means to standardize pressure and leaf contact angle, significantly reducing variation in the delivery of Agrobacterium solutions into plant tissues. Consistent introduction of bacterial solutions may lead to optimized expression of transient constructs or improved stable transformation rates.
Attributes of the Standardized Pressure Agroinfiltration Device (SPAID). a The following labeled parts: (i) Plastic wrap, (ii) Cable ties holding syringe plunger, (iii) Syringe plunger soaking in 95% ethanol, (iv) Electronic analytical balance (in grams), (v) Metal plate, (vi) Dissecting microscope with coarse adjustment knob. b The syringe plunger mounted to the microscope nosepiece perpendicular to the microscope stage. c Agrobacterium solutions are transferred to a microcentrifuge tube. d Agrobacterium solutions are drawn into a syringe body. e Leaf explants are treated with Agrobacterium solution by rotating the coarse adjustment knob while monitoring reading on electronic scale
Main text
Design and application of the SPAID
Precise, linear control of pressure on the subject was obtained by mounting a syringe plunger to the nosepiece of a decommissioned dissecting microscope (Fig. 1a). The dissecting microscope objectives were removed and a syringe plunger was attached to the nosepiece using cable ties (Fig. 1b). The microscope frame was cleaned with 70% ethanol, and all subsequent procedures were performed in a laminar flow hood. The plunger was oriented in a perfectly vertical position and remained attached to the microscope between trials. It was replaced only after many uses when it failed to create a complete seal within the syringe body.
Syringe bodies were cut to approximately half their original size and stored in 95% ethanol. For each treatment, a syringe body was dried by evaporation in a laminar flow hood and mounted onto the plunger (Fig. 1d). The Agrobacterium suspension is drawn into the syringe by pulling down on the syringe body with sterile forceps while the tip is submerged in culture.
Sterile leaf explants were then treated by rotating the focus knob and touching the tip of the syringe on to the leaf surface. The pressure applied was measured using an analytical balance (Fig. 1e).
Plant materials
All plant materials are common laboratory genotypes used in plant transformation. Strawberry (Fragaria vesca, ‘YW5AF7’) and tobacco (Nicotiana benthamiana) leaf explants were obtained from materials grown in magenta culture containers in ½ × Murashige and Skoog media (pH 5.8) solidified with 0.8% phytoagar (Phytotechnology Laboratories, Shawnee Mission, KS). Individual leaves were excised under a laminar flow hood with sterile forceps, and floated on sterile water. Arabidopsis thaliana leaves were obtained from plants (ecotype Col-0) grown aseptically on the same media in deep petri dishes.
Agrobacterium culture conditions
All Agrobacterium cultures (strain GV3101) containing the plasmid pKWGD7, containing a constitutive promoter fused to green fluorescent protein (GFP), were grown at 29 °C in Luria Broth containing 5 g NaCl/L to 0.8 OD600. The cultures were centrifuged at 3000×g for 10 min and resuspended in ½ × Murashige and Skoog (MS) medium pH 5.6 to a specified density prior to SPAID-mediated inoculation.
Post-infiltration treatment
Explants were moved to solid medium containing plant growth regulators to induce callus formation. Strawberry explants were moved to the media defined in Slovin et al. [21]. Tobacco explants were cultured on “selection medium” [22] and Arabidopsis explants were cultured on Callus Induction Medium [23]. For tobacco and Arabidopsis the media prepared substituted phytoagar (RPI, Mt. Prospect, IL) for solidification. GFP positive calli and foci were counted after 2 weeks.
Tests of culture density
Agrobacterium cultures were applied to strawberry and tobacco leaf explants at different concentrations to test for effect of culture density on transformation at a medium delivery pressure. Agrobacterium cultures were resuspended in 1/2 × MS to obtain final culture densities of 0.1, 0.5, 0.8, or 1.2 OD600. Each suspension was applied to abaxial leaf surfaces at 273 kilopascals (kPa; a reading of 500 g on the balance) for 5 s. The results from strawberry showed no significant difference between culture densities (Table 1). When used on tobacco, 100% of explants featured GFP positive calli and many foci, and results were not significant between treatments (not shown).
Tests of pressure on transformation rate
Agrobacterium cultures (0.5 OD600) were then applied to the abaxial side of leaf explants using various pressures. The pressure applied at the syringe tip was calculated in kPa based on the area of the syringe opening using values obtained from an analytical balance. Forces (kPa) applied to the explants were 54 (100 g), 109 (200 g), 163 (300 g), 218 (400 g), 273 (500 g), 327 (600 g), and 546 (1000 g). Stable transformation was scored as the number of GFP foci 2 weeks after treatment. The results are presented in Table 2. For strawberry, there were significant differences through the mid-range of pressures tested (500–800 kPa). For tobacco, lower and mid-range pressures (< 600 kPa) provided the greatest numbers of GFP-positive calli, and Arabidopsis also showed more explants with stable foci when treated with lower pressures (< 600 kPa). Visible damage to leaves was observed frequently in tobacco and Arabidopsis above 800 kPa (not shown).
Conclusions
In the post-genomics era methods are required to test candidate gene function, localization and protein–protein interaction partners in vivo. While stable transformation is the gold standard, transient expression methods can be relatively rapid, high throughput, yet meaningful. However, these methods are limited in part by the inconsistency between experimental replicates. This may be attributed to the relatively simple means used to introduce the transforming bacteria into plant tissues—simply pressing in culture through a needleless syringe. In our hands, these methods suffer from extreme variability and low reproducibility, and while results are suggestive, there is a need to limit the sources of variation in the assay. The goal of the current work was to control as many variables as possible in the agroinfiltration process, with the goal of decreasing variability inherent in transient assays, as well as optimizing transformation frequencies.
Previous work has examined the roles of culture density, Agrobacterium strain, and various additives (such as ascorbate or acetosyringone) [24]. Many other reports detail introduction of cultures based on a variety of methods from vacuum infiltration to sonication. In all of these delivery methods parameters may be controlled precisely, allowing some control of culture into the subject tissue. However, hand delivery of bacterial suspensions into tissue via a needleless syringe is not as easily controlled for consistency.
The SPAID removes a central issue in syringe-mediated agroinfiltration—the perpendicular introduction of bacterial suspensions to the leaf surface. When performed by hand, imperfect seals or uneven pressure on the leaf surface causes liquid to leak from the leaf-syringe interface, leading to less introduction into the leaf variation in pressure between trials. Moreover, when higher pressures are applied, the edges of the syringe opening can damage the leaf, leading to a necrotic lesion that could affect explant vitality and ultimately transformation and regeneration rates.
Several variables were tested in strawberry, tobacco and Arabidopsis. Different concentrations of Agrobacterium suspension were tested, based upon values that are commonly used in plant transformation. The results show no difference between relatively common levels used, suggesting that culture density is not an important variable and even lower concentrations may be successfully utilized in these experiments.
On the other hand, differences in stable transformation were observed, and were pressure dependent. Strawberry responded best to pressures in the middle of the range tested. Tobacco and Arabidopsis responded best to lower pressures. These findings are important and underscore the utility of the SPAID approach, as less pressure is may be better for balancing bacterial introduction and tissue injury, yet is extremely difficult to accurately achieve with manual application. This approach may be extremely valuable when Agrobacterium cultures are introduced to non-detached leaves, as is the case with many applications in N. benthamiana.
The use of the SPAID approach may be especially useful when RNAseq is being performed on transiently transformed tissues. The report by Bond et al. [19] examines gene expression in leaf cells of M. truncatula and N. benthamiana when infiltrated with Agrobacterium cultures containing a specific MYB-type transcription factor. The results showed expected changes in target genes, but also unveiled discovery of new regulators and feedback mechanisms. Such approaches are clearly effective, and will only improve with standardization through use of consistently applied treatments, such as those enabled with the SPAID.
The work presented here takes on the first step—introducing the transgene at a high rate. This process removes one source of variability and error that ultimately may affect rate-limiting downstream processes, such as regeneration of plantlets. Additional applications in transient gene expression, protein–protein interaction, and protein localization also may benefit from use of this delivery device.
Limitations
As demonstrated in “Main text” section, the optimization must be performed on each type of plant and each type of tissue studied. The device also requires use of a sterile environment such as a laminar flow hood, which may not be accessible to some users.
Abbreviations
- SPAID:
-
Standardized Pressure Agrobacterium Infiltration Device
- GFP:
-
green fluorescent protein
- MS:
-
Murashige and Skoog (medium)
- kPa:
-
Kilopascals, SI unit of pressure
References
Hoffmann T, Kalinowski G, Schwab W. RNAi-induced silencing of gene expression in strawberry fruit (Fragaria × ananassa) by agroinfiltration: a rapid assay for gene function analysis. Plant J. 2006;48(5):818–26.
Härtl K, Kalinowski G, Hoffmann T, Preuss A, Schwab W. RNAi-mediated endogene silencing in strawberry fruit: detection of primary and secondary siRNAs by deep sequencing. Plant Biotechnol J. 2017;15(5):658–68.
Carvalho RF, Carvalho SD, O’Grady K, Folta KM. Agroinfiltration of strawberry fruit—a powerful transient expression system for gene validation. Curr Plant Biol. 2016;6:19–37.
Xu K, Huang X, Wu M, Wang Y, Chang Y, Liu K, et al. A rapid, highly efficient and economical method of Agrobacterium-mediated in planta transient transformation in living onion epidermis. PloS ONE. 2014;9(1):e83556.
Shamloul M, Trusa J, Mett V, Yusibov V. Optimization and utilization of Agrobacterium-mediated transient protein production in Nicotiana. J Vis Exp JoVE. 2014;86:51204.
Wang WC, Menon G, Hansen G. Development of a novel Agrobacterium-mediated transformation method to recover transgenic Brassica napus plants. Plant Cell Rep. 2003;22(4):274–81.
Bastaki NK, Cullis CA. Floral-dip transformation of flax (Linum usitatissimum) to generate transgenic progenies with a high transformation rate. J Vis Exp JoVE. 2014;94:52189.
Zale JM, Agarwal S, Loar S, Steber CM. Evidence for stable transformation of wheat by floral dip in Agrobacterium tumefaciens. Plant Cell Rep. 2009;28(6):903–13.
Clough SJ, Bent AF. Floral dip: a simplified method for Agrobacterium-mediated transformation of Arabidopsis thaliana. Plant J. 1998;16(6):735–43.
Bhaskar PB, Venkateshwaran M, Wu L, Ané J-M, Jiang J. Agrobacterium-mediated transient gene expression and silencing: a rapid tool for functional gene assay in potato. PloS ONE. 2009;4(6):e5812.
Trick HN, Finer JJ. SAAT: sonication-assisted Agrobacterium-mediated transformation. Transgenic Res. 1997;6(5):329–36.
de Oliveira MLP, Febres VJ, Costa MGC, Moore GA, Otoni WC. High-efficiency Agrobacterium-mediated transformation of citrus via sonication and vacuum infiltration. Plant Cell Rep. 2009;28(3):387.
Jin T, Wang J, Zhu X, Xu Y, Zhou X, Yang L. A new transient expression system for large-scale production of recombinant proteins in plants based on air-brushing an Agrobacterium suspension. Biotechnol Rep. 2015;6:36–40.
Hellens RP, Allan AC, Friel EN, Bolitho K, Grafton K, Templeton MD, et al. Transient expression vectors for functional genomics, quantification of promoter activity and RNA silencing in plants. Plant Methods. 2005;1(1):13.
Martin K, Kopperud K, Chakrabarty R, Banerjee R, Brooks R, Goodin MM. Transient expression in Nicotiana benthamiana fluorescent marker lines provides enhanced definition of protein localization, movement and interactions in planta. Plant J. 2009;59(1):150–62.
Tian G, Lu Q, Zhang L, Kohalmi SE, Cui Y. Detection of protein interactions in plant using a gateway compatible bimolecular fluorescence complementation (BiFC) system. J Vis Exp. 2011. https://doi.org/10.3791/3473.
Meng Y, Li N, Tian J, Gao J, Zhang C. Identification and validation of reference genes for gene expression studies in postharvest rose flower (Rosa hybrida). Sci Hortic. 2013;158:16–21.
D’Aoust M-A, Lavoie P-O, Belles-Isles J, Bechtold N, Martel M, Vézina L-P. Transient expression of antibodies in plants using syringe agroinfiltration. In: Faye L, Gomord V, editors. Recombinant proteins from plants: methods and protocols. Totowa: Humana Press; 2009. p. 41–50.
Bond DM, Albert NW, Lee RH, Gillard GB, Brown CM, Hellens RP, et al. Infiltration-RNAseq: transcriptome profiling of Agrobacterium-mediated infiltration of transcription factors to discover gene function and expression networks in plants. Plant Methods. 2016;12(1):41.
Leuzinger K, Dent M, Hurtado J, Stahnke J, Lai H, Zhou X, et al. Efficient agroinfiltration of plants for high-level transient expression of recombinant proteins. J Vis Exp JoVE. 2013;77:50521.
Slovin JP, Schmitt K, Folta KM. An inbred line of the diploid strawberry Fragaria vesca F. semperflorens for testing gene function. BMC Plant Methods. 2009;5:15–25.
Clemente T. Nicotiana (Nicotiana tobaccum, Nicotiana benthamiana). Methods Mol Biol. 2006;343:143–54.
Akama K, Puchta H, Hohn B. Efficient Agrobacterium-mediated transformation of Arabidopsis thaliana using the bar gene as selectable marker. Plant Cell Rep. 1995;14(7):450–4.
Norkunas K, Harding R, Dale J, Dugdale B. Improving agroinfiltration-based transient gene expression in Nicotiana benthamiana. Plant Methods. 2018;14(1):71.
Authors’ contributions
MFMA conducted all experiments, performed statistical tests, maintained tissue cultures, and prepared a draft of the manuscript. KMF conceived design of the SPAID, performed experiments and finalized the manuscript for publication. Both authors read and approved the final manuscript.
Acknowledgements
The authors thank the Government of Malaysia for the graduate assistantship for MFMA.
Competing interests
The authors declare that they have no competing interests.
Availability of data and materials
All data generated or analysed during this study are included in this published article.
Consent for publication
Not applicable.
Ethics approval and consent to participate
Not applicable.
Funding
The research as sponsored by the Government of Malaysia in support of a graduate assistantship and tuition (MFMA). These funds covered the cost of personnel for design, execution, analysis and preparation of the manuscript. All other support was provided from discretionary laboratory funds (KMF) that were used for materials and supplies.
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.
About this article
Cite this article
Mad’ Atari, M.F.b., Folta, K.M. Transformation improvement with the Standardized Pressure Agrobacterium Infiltration Device (SPAID). BMC Res Notes 12, 144 (2019). https://doi.org/10.1186/s13104-019-4117-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1186/s13104-019-4117-3