Background

Monoclonal antibodies are probably the most versatile and widespread class of reagents used in biology research, diagnostics, and therapy. Although IgG antibodies recovered from hybridoma cells still dominate the field, alternative formats know a constantly increasing success and recombinant Fab, single-chain (scFv) and single-domain (VHH) antibodies have demonstrated their reliability in basic research as well as in clinical applications [1],[2]. In the case of VHHs, their reduced mass is a decisive advantage to obtain faster clearance for in vivo imaging, a better penetration in solid tumors and even the permeation across the blood brain barrier [3]-[5]. The in vitro selection allows for the isolation of binders for toxic or scarcely antigenic targets as well as for epitopes correlated to specific functions. Whole cells have been successfully used for panning antibody fragments that recognize membrane proteins in their native membrane environment and for identifying new biomarkers [6]. Basic molecular biology techniques allows for VHH fusion to tags and larger carriers to obtain application-optimized reagents [7]. Single-domains can be easily reconstituted into the Camelidae IgG-like format by fusion to a Fc domain and Fc moieties with different characteristics can be selected to tune ADCC and CDC effects in different organisms.

In contrast to conventional antibodies, recombinant antibodies are routinely expressed also in prokaryotic systems. Bacteria can be used to display on their surface antibodies of different format for diagnostic applications [8],[9] and to obtain elevated VHH productions in both the periplasm and the cytoplasm [10]-[13]. In contrast, the yields of reconstituted IgG-like molecules and fusions with some valuable tags remain low [14],[15] due to either structural complexity or different redox requirements of the two partner polypeptides. Recently, it has been demonstrated that the cytoplasmic co-expression of disulfide-bond dependent proteins together with sulfhydryl oxidase and a disulfide bond isomerase increased significantly the production of the target proteins [16]. Such approach proved being effective to improve the cytoplasmic accumulation of full-length VHH-SNAP tag fusions [17]. Nevertheless, no proof of antibody functionality was shown in this preliminary communication. Now we demonstrate that several VHH-based constructs as complex as the IgG-like reconstituted VHH-Fc antibodies can be produced in bacterial cytoplasm at elevated yields and preserve their complete functionality. This opportunity represents a time and cost effective alternative to the conventional expression of IgG antibodies from hybridoma cells. Furthermore, it allows the production of fusion molecules such as the VHH-SNAP or VHH-GFP constructs that are difficult to obtain in oxidizing environments.

Results and discussion

The in vitro recovery of recombinant antibodies represents an effective and rapid alternative for isolating binders against any antigen class. Furthermore, the access to the antibody sequence simplifies molecular engineering and opens the possibility to fuse suitable tags to the antibodies to develop them in reagents optimally suited to different applications. Such fusion constructs are often easy to produce in bacteria and we designed a collection of vectors for the parallel expression of application-friendly VHHs production in both bacterial periplasm and cytoplasm (Additional file 1: Figure S1). In a preliminary expression test we noticed that tags could significantly modify the antibody stability and yields. SNAP/CLIP and GFP were poorly folded and were prone to aggregate when expressed in the periplasm whereas the presence of trans disulfide bonds in structurally complex proteins such as alkaline phosphatase, peroxidases, and enzymatic toxins seemed to be compatible only with periplasmic expression. We designed a decision chart with the aim of optimizing the cytoplasmic expression of fusion antibodies that either failed to be expressed in the periplasm or, such as the Fc-fusions, accumulated in low amounts (Additional file 2: Figure S2). Bacterial mutants in which the cytoplasmic reducing metabolism is impaired have been sometimes successfully used to express disulfide-dependent proteins but the results are contradictory specially when molecules with multiple disulfide bonds must be produced [11],[18]. Therefore, we evaluated the promising alternative of inducing the formation of disulfide bonds in the cytoplasm of wild type bacteria in which a recombinant eukaryotic sulfhydryl oxidase is accumulated [16]. The expression of the oxidizing enzyme is triggered by arabinose addition to the culture medium and can be induced independently and before the expression of the antibodies by means of IPTG addition.

By panning a pre-immune library, we isolated several VHHs specific for the ectodomain of the human HER2 receptor (data not shown) and expressed three of them (A10, C8, G3) using both the original periplasmic phagmid vector (pHEN2) which allows for the fusion to a His-myc tag and a cytoplasmic vector (pSNAP) for obtaining a His-SNAP fusion. The constructs were purified by IMAC and successively by gel filtration for separating aggregates and polymerization products (Additional file 3: Figure S3a). The yields of the SNAP-fusions were significantly higher than those of the myc-fusions (Table 1) and the degradation products/aggregates represented a negligible percentage of the affinity-purified antibodies (Figure 1 and Additional file 3: Figure S3a). We then compared the performance of the constructs expressed in the periplasm (His-myc, per) and cytoplasm (His-SNAP, cyt) at the FACS. In a first experiment, the detection was obtained in both cases using an anti-His labeled secondary antibody (indirect labeling). The A10-SNAP construct discriminated the HER2-positive SKBR3 and MCF10A negative cell populations even better than the A10-myc (Figure 1). However, the advantage of the SNAP tag is that it can be covalently labeled before immune detection (FACS or IF) enabling the direct detection of the antigen. The construct A10-SNAP coupled to the chromophore SNAP-Surface 549 successfully identified its antigen with no signal loss in FACS (Figure 1). The A10 clone fused to SNAP showed specificity in cell ELISA and in immunofluorescence when HER2-positive SKBR3 and HER2-negative MCF10A cells were compared (Figure 1). A10 myc and SNAP constructs showed comparable SPR-measured affinities for the purified ectodomain of HER2, a further clear indication that the cytoplasmic expression did not decrease the functionality of the recombinant antibody fused to the SNAP tag (Figure 2a). This first set of results demonstrated that the cytoplasmic expression of VHH-SNAP fusions in the presence of sulfhydryl oxidase enabled to produce functional antibodies the binding capacity of which was at least as good as that of the same VHHs expressed in the periplasm, but with significantly higher yields. Similarly, we successfully expressed, labeled, and validated by FACS a scFv-SNAP construct (anti-claudin-3, Additional file 4: Figure S4a), the A10 VHH fused to the tags CLIP and HALO (Additional file 4: Figure S4b), and produced a VHH-GFP fusion protein that provided a clear signal shift in flow cytometry without the necessity of using primary/secondary commercial antibodies (Figure 2b). Wild type GFP cannot be exported to the periplasm by the SEC pathway in an active form [19] and, although some fluorescent protein variants are able to accumulate in this oxidizing cell compartment necessary for the formation of the antibody disulfide bonds, the choice remains limited to few molecules [20],[21]. Here we demonstrate the feasibility of an approach to produce in the bacterial cytoplasm fluorescent immune reagents that should be not restricted to few specific sequences.

Table 1 Yield comparison of anti-HER2 VHHs fused together to different tags
Full size table
Figure 1
figure 1

Functional validation of the anti-HER2 SNAP-tagged VHH A10 expressed in the bacterial cytoplasm. Cytoplasmic-expressed A10-SNAP fusion protein was eluted at almost homogeneity (E) after a single metal affinity chromatographic (IMAC) step. Both a portion of the fusion protein and SNAP alone accumulated in the pellet (P). FACS analysis (filter band-pass: 564-606 nm) was performed using HER2 negative (MCF10A) and positive (SKBR3) cells and used to compare different A10 constructs and detection methods: i) myc + His-tagged antibodies expressed in bacterial periplasm in combination with anti-His and a secondary antibodies; ii) SNAP + His-tagged antibody expressed in bacterial cytoplasm in combination with anti-His plus secondary antibody; iii) SNAP + His-tagged antibody expressed in bacterial cytoplasm directly linked to the SNAP-Surface 549 (NEB) chromophore. The same cell lines were used in combination with A10-SNAP for cell ELISA and for immunostaining HER2 at the cell membrane of negative (MCF10A) and positive (SKBR3) cells.

Full size image
Figure 2
figure 2

Comparison between antibody constructs expressed in the bacterial cytoplasm and periplasm. a) The affinity of the VHH A10 for its antigen HER2 (purified ectodomain) was measured by Surface Plasmon Resonance. Three constructs were compared: A10 tagged myc + His and expressed in the bacterial periplasm, A10 tagged SNAP + His and A10 tagged SORT + His, both expressed in the bacterial cytoplasm. The graphs correspond to a single experiment representative of at least three repeats. The analyte concentrations were in the range 300-3.5 nM (myc-tag), 100-3.5 nM (SNAP-tag), and 30-0.35 nM (SORT-tag). b) The anti-HER2 antibodies A10 fused to GFP was expressed in the cytoplasm and directly assessed by FACS (filter band-pass: 515-545 nm) using HER2 negative (MCF10A) and positive (SKBR3) cells. c) The anti-HER2 antibodies A10 and C8 were expressed fused to the LPTEG peptide (SORT tag) in both the periplasm and the cytoplasm and the resulting samples were assessed by FACS (filter band-pass: 564-606 nm) using HER2 negative (MCF10A) and positive (SKBR3) cells, and the 6xHis tag for visualization.

Full size image

In these first examples of cytoplasmic antibody expression, no direct comparison between the same construct expressed either as cytoplasmic or secreted protein was possible because we did not manage to recover soluble VHH-GFP and VHH-SNAP fusion proteins from the bacterial periplasm. Therefore, we used another tag that could be expressed in both bacterial cell compartments to obtain comparable samples. The SORT-tag is a short peptide (LPTEG) that allows for the sortase-dependent covalent conjugation to N-terminal available glycine residue(s) [22] and has been used for obtaining fusions between several classes of molecules [23],[24]. Surprisingly, the presence of this short tag instead of the conventional myc strongly decreased the solubility of all three tested anti-HER2 antibodies when they were expressed in the periplasm (Table 1). In contrast, the cytoplasmic yields were elevated and, in terms of molarity, comparable with those obtained using SNAP as a fusion tag (Table 1). The SORT-tagged antibodies produced in the periplasm and in the cytoplasm labeled at similar intensity HER2 pos and HER2 neg cells in FACS experiments, with a reproducible stronger signal for the cytoplasmic constructs (Figure 2c). Unexpectedly, the cytoplasmic A10-SORT construct showed higher SPR-measured affinity for its antigen than the control A10-myc construct recovered from the periplasm (Figure 2a). The difference was totally due to the improved association rate. This result confirmed the binding functionality of the construct expressed in the cytoplasm and suggests that despite having similar overall mass, the relative length and/or folding of the different tags can influence the accessibility and actual binding of the two constructs to the antigen epitope, as already noticed by other authors [25],[26]. We cannot rule out that the small observed differences in terms of antibody binding capacity were due to minimal stability variation of the different constructs. If this is the case, cytoplasmic expression resulted more convenient than the periplasmic production of the same construct because it enabled both higher yields and slightly but repeatedly measured "improved" functionality.

Recombinant antibodies with tags such as SNAP/CLIP/HALO/GFP and SORT are suitable for several attractive biological applications, but still represent a niche in comparison to IgG antibodies. In some cases, introducing new protocols based on non-conventional antibody formats for performing immunological analyses might be demanding for the lab management. Therefore, it can be more practical to reconstitute antibody fragments into IgG-like molecules that can be used and detected as conventional monoclonal antibodies. Consequently, we expressed in the cytoplasm the same anti-HER2 set of antibodies used in the previous experiments but as fusions with a rabbit Fc domain. This tag offers some specific advantages such as the possibility to affinity purify the molecules using Protein A/G, to increase the avidity for the antigen by inducing dimerization, and to perform multiple parallel staining by exploiting Fc domains issued from different organisms [27].

All the constructs were well expressed (Table 1) and highly pure already after IMAC step (Additional file 3: Figure S3b). Size exclusion chromatography (SEC) confirmed that the antibodies were monodispersed (Additional file 3: Figure S3b). The functionality of the bivalent Fc-VHHs was confirmed by cell ELISA and FACS. In this last case, the reconstituted IgG-like molecules were at least as effective as the therapeutic antibody trastuzumab (Figure 3). Although VHHs usually bind to conformational epitopes that are lost after antigen denaturation, C8 recognized its antigen by western blot in a total cell lysate and immunoprecipitated the full-length as well as many of the shedding products [28] of the HER2 ectodomain (Figure 3). These results indicate that the epitope recognized by the binder is probably very basal and that C8 could be useful for evaluating the metal protease-dependent HER2 isoform distribution in different cell populations. The IF staining pattern on HER2 positive and negative cells was identical for the monoclonal trastuzumab, the cytoplasmic produced IgG-like A10-Fc construct, and the monovalent periplasmic produced A10-myc construct (Figure 4).

Figure 3
figure 3

Functional validation of Fc-VHH fusion antibodies. Fc-VHH constructs corresponding to the clones A10 and C8 were expressed in the bacterial cytoplasm, purified, and finally tested by cell ELISA and compared with the monoclonal anti-HER2 therapeutic monoclonal antibody trastuzumab by FACS (filter band-pass: 564-606 nm) using HER2 negative (MCF10A) and positive (SKBR3) cells. C8-Fc was used for HER2 detection by WB and to immunoprecipitate HER2 from SKBR3 cells.

Full size image
Figure 4
figure 4

Identification of the membrane receptor HER2 by immunofluorescence. The IF staining pattern of the VHH A10 fused to either myc (periplasmic expression) or Fc (cytoplasmic expression) was compared with that of trastuzumab in HER2 neg and HER2 pos cells.

Full size image

The measurement of the apparent affinity (avidity) of bivalent constructs confirmed that the tag characteristics can influence the antigen/antibody binding, as previously observed for the monovalent constructs (Additional file 5: Table S1). The avidity effect enabled the construct A10-Fc to bind its antigen one log stronger (Figure 5) than the monovalent constructs (Figure 2c). At the same time, there is a substantial difference between the avidities of the Fc and alkaline phosphatase (AP) fusions (Figure 5). Although expressed in the periplasm, the dimer A10-AP bound HER2 with a K D in the lower nanomolar range, a log worse than the A10-Fc construct produced in the cytoplasm (Figure 5). This result confirms that functional binding capacity is not a simple matter of active domain number [29].

Figure 5
figure 5

Avidity effect of the bivalent Fc-VHH construct. The avidity of the bivalent A10-Fc was compared with that of the bivalent constructs A10-alkaline phosphatase (AP, periplasmic bacterial expression) and trastuzumab (hybridoma expression). The graphs correspond to a single experiment representative of at least three repeats. The analyte concentrations were in the range 1-0.01 nM (myc-tag), 300-3.5 nM (AP-tag), and 1-0.01 nM (SORT-tag).

Full size image

Finally we evaluated the capacity of the IgG-like reconstituted antibodies produced in the bacterial cytoplasm to target a HER2-positive tumor in vivo using a xenografted murine model. C8 was preferred because it was the only of the three characterized antibodies that worked in both WB and IP and, therefore, we expected that it could recognize its antigen in a wider range of structural conformations. Animals were treated with infra-red labeled anti-HER2 C8-Fc and trastuzumab (positive control), as well as with an anti-GFP antibody (negative control). Tumors were recovered after both 3 and 48 hours, sectioned along the median axis to have access to the inner section, and the emitted infrared fluorescence was recorded (Figure 6). The mass (80 kDa) of reconstituted IgG-like Abs impairs direct kidney filtration and the rapid clearence specific of monovalent VHHs (14 kDa) [5],[30]. Consequently, C8-Fc accumulated in the tumor tissues with the same kinetic of the positive control trastuzumab. Although fluorescence does not allow for accurate quantitative comparisons, the recombinant antibodies seem as effective as trastuzumab in concentrating inside the tumor. The tumors treated with the control anti-GFP recombinant antibody did not show any fluorescence signal at both 3 and 48 hours.

Figure 6
figure 6

Antibody accumulation in xenografted tumors. HER2 positive tumors were recovered from treated mice 3 and 48 hours after antibody injection. Tumors were cut in two pieces along their median axis and their infrared fluorescence intensity detected at 770 nm.

Full size image

Conclusions

Single-domain antibodies can be produced at elevated yields and their structural stability allows for the accumulation of functional molecules even in the cytoplasm of wild-type bacteria [13]. Here we show that even formats as complex as Camelidae IgG-like structures can be produced rapidly and cost-effectively in bacteria. Functional IgG recombinant antibodies have been already successfully produced in bacterial periplasm in the past [14] but yields of correctly assembled full-length molecules rarely exceeded 1 mg/L when shake flasks were used. This condition limited antibody discovery programs that rely on the availability of large batches of antibodies. Recently, engineered systems based on mutagenized over-expressing strains and optimized plasmids succeeded in yielding up to 4 mg/L of IgGs [15] and similar yields were obtained expressing scFv-Fc fusions in Leishmania tarantolae[31]. The protocol described in this article shows that it is possible to increase the yields to tens of mg/L and, according to recently published data [13], there is still the possibility to enhance the yields per liter of culture by increasing the cell density using optimized media and fermentation conditions. However, the main achievement of our approach is the demonstration -obtained by means of several independent techniques [32]- that the functionality of the IgG-like constructs is totally preserved when they are purified after expression in the cytoplasm of bacteria co-expressing sulfhydryl oxidase and the bacterial protein disulfide isomerase DsbC. The combined oxidative and isomerase activities apparently prevent the accumulation of non-functional antibodies. When the comparison was possible, the constructs expressed in the cytoplasm showed both lower aggregation and degradation than those measured in the periplasm. This approach, initially proposed by Ruddock's group for producing disulfide-bond dependent secreted proteins [16],[33], perfectly fits to antibody fragments fused to tags with different folding requirements [17],[34]. The bottleneck represented by the saturation of the SEC-translocon [35] would explain the remarkable higher yields obtained when the antibodies were produced in the cytoplasm rather than in the periplasm. Lately we expressed tens of other VHH-Fc constructs using both rabbit and human Fc and clearly remarked yield difference among antibodies. This condition is probably due to the intrinsic stability of the different sequences but the cytoplasmic expression was constantly more productive than the periplasmic.

The present trend in both academic and industrial labs seems to be focused on using single domain antibodies from Camelidae and human origin as well as Fab fragments to identify new reagents and therapeutic molecules [36],[37]. We believe that our approach might represent a break-through technology for researchers who need to produce significant amounts of antibodies and antibody-based reagents for preliminary in vitro and in vivo characterization. We produced the described antibodies in wild type E. coli that cannot provide eukaryotic-like glycosylation but our results should encourage expressing IgG-like constructs in modified bacteria [38] with the aim of obtaining antibodies with native post-translational modifications.

Methods

Plasmid preparation

pET14b-rFc. The rabbit Fc fragment of the pFUSE-rFc2-adapt-scFv vector [39] was amplified by PCR using forward primer GAGGCGGCCGCTAGATCTAGCAAGCCCA CGTG and backward primer GAGATTGGATCCATCATGTCTGGCCAGCTAGC. The PCR product was purified by agarose gel electrophoresis and sub-cloned into pET14b-hFc-multitag between Not I and BamH I. VHHs were then inserted in pET14b-rFc between Nco I and Not I.

pSORTp. The DNA sequence corresponding to GSSGG-LPETG-6xHis was synthesized by Proteogenix (France) and sub-cloned into the pHEN8 [40] vector using Not I and Bsm I. VHHs were then inserted in pSORTp between Nco I and Not I. The sequence of the VHH-GSSGG-LPETG-6xHis in the pSORTp vector was digested with Nco I and BamH I and sub-cloned into pET14b to obtain the cytoplasmic version of the vector (pSORTc).

The vector for the production of VHH and scFv antibodies fused to the SNAP tag used in this work is identical to the one described previously [7], but the lecture frame has been modified by introducing a further base to render it universal. CLIP and HALO sequences were substituted to SNAP sequence to yield the corresponding expression vectors.

Antibody production

Recombinant antibodies were expressed in E. coli BL21 (DE3) strain transformed with a plasmid for the expression of sulfhydryl oxidase and DsbC [16],[17]. Briefly, 2 mL of over-night preculture were used to inoculate 500 mL of LB broth in the presence of the appropriate antibiotics. For small-scale screening purpose, 30 μL were used to inoculate 3 mL of culture medium. Bacteria were grown at 37°C until OD600nm reached 0.4. Sulfhydryl oxidase and DsbC expression was induced by adding 0.5% (g/mL culture) of arabinose and the temperature was lowered to 30°C. After 45 min, 0.05 mM of IPTG were added to induce antibody expression, the bacteria were grown overnight at 20°C, harvested, and frozen. Pellets were resuspended in 20 mL of 100 mM Tris pH8, 500 mM NaCl, 2.5 mM MgCl2. Lysozyme (0,5 mg/mL) and DNase (3U) were added and the lysate was kept 30 min at room temperature. Samples were sonicated and finally centrifuged at 18,000xg for 20 min at 4°C. Lysates were filtered and applied on either a HiTrap TALON® 5 mL column or on a HiTrap MabSelect SuRe 5 mL column in combination with a chromatographic AKTA pure system (GE Healthcare). Analytical [41] and preparative size exclusion chromatographic steps were performed on Superdex™ 75 5/150 and 10/300 GL, respectively (GE Healthcare). Antibody concentration was measured using BCA colorimetric assay. Denaturing SDS-PAGE gels (15%) were Coomassie stained and recorded using a Gel Doc™ EZ System (Bio Rad). In the case of small-scale production, the supernatant obtained after pellet lysis was incubated in the presence of Protein A sepharose beads (GE Healthcare), the beads were washed, resuspended in loading buffer, and the proteins separated by denaturing SDS-PAGE.

Western blot and immunoprecipitation

Cell lysates were separated on a 12% SDS-PAGE and transferred to a nitrocellulose membrane. After 60 min in 5% milk-PBS, the membrane was incubated 1 h with 10 μg/mL of the C8-Fc (IgG-like) antibody specific for the HER2 ectodomain. After 3 washing steps in PBS, 4 μg/mL of anti-myc monoclonal Ab (9E10) were added followed by HRP-conjugated goat anti-mouse antibody (Cat. N. 32430, Pierce). HRP-dependent signal was identified by autoradiography using enhanced chemiluminescence.

For immunoprecipitation (IP), SKBR-3 cells were grown to 90% confluence in 150 mm culture dishes, washed twice with PBS, and their lysis was induced in the presence of 3 mL of 10 mM Tris-HCl, pH 8.0, 150 mM NaCl, 1% NP 40, 1 mM EDTA, protease inhibitor cocktail for each dish. After 1 h incubation at 4μC, the material was harvested by scraping and cell debris was separated from soluble lysate by centrifugation (10 min at 3600xg and 4°C). All the incubation steps were performed rocking the tubes constantly. Cleared cell lysates (5 mL) resuspend in an equal volume of IP buffer (10 mM Tris-HCl, pH 8.0, 150 mM NaCl, 1% NP40) were pre-incubated 1 h at 4°C in the presence of 200 μL of protein G agarose beads (Thermo Fisher) and successively washed 3 times in IP buffer to eliminate unspecific binding. The supernatant was recovered by centrifugation (3 min × 2500 g), mixed with 200 μg of the antibody, and incubated 2 h at 4°C. Finally, 200 μL of washed protein G agarose beads were added and washed after 1 h at 4°C 5 times in 10 mL of IP buffer five times before being resuspended in 50 μL of SDS loading buffer and heated 10 min at 95°C. The protein samples were fractionated on a 12% SDS-PAGE, transferred to a nitrocellulose membrane, and HER2 was identified by chemiluminescence as for the western blot.

Flow cytometry analysis

Specific antibody binding to the HER2 receptor expressed at the cell surface was analyzed by flow cytometry using SKBR3 (positive sample) and MCF10A (negative sample) cells. Cells were first incubated in 96 well plates in the presence of 10% FCS-PBS to prevent unspecific binding and then 2 hours at 4°C cells with monovalent VHHs. Cells were analyzed with FACS-Calibur Flow Cytometer (BD Biosciences) after having incubated them 1 hour at 4°C with either a monoclonal anti-myc (9E10) or an anti-His (Tebu Bio) primary antibody followed by a goat anti-mouse antibody conjugated to phycoerythrin (BD Pharmingen). SNAP-tag was directly labeled using the chromophore SNAP-Surface AlexaFluor 549 (NEB).

The SNAP-Surface AlexaFluor 647 Protein Labeling kit (NEB) was employed to label the scFvH6-SNAP fusion protein according to the manufacturer's instructions. Cell surface claudin-3 specific binding was tested on native unfixed OSPC-2 primary ovarian carcinoma cell line (positive sample) and human leukemia K562 cells (negative control). After detachment with 0.5 mM EDTA, cell viability was evaluated with Trypan Blue exclusion and only samples with more than 80% of viable cells were considered for staining. Membrane integrity of stained samples was assessed with PE Annexin V Apoptosis detection kit (BD Pharmingen) and AnnexinV negative viable cells where identified with an appropriate gating strategy. Approximately 2x105 cells per test were used for each experiment. Cells were washed three times with PSB buffer supplemented with 0.5% BSA and incubated 1 hour at 20°C with 500 ng of scFvH6-Alexa 647. Cells were finally resuspended in PBS and analyzed by flow cytometry using FACS-Calibur and Cell quest Pro Software (BD). No commercial antibody for the claudin-3 ectodomain is available for direct comparison.

ELISA

Assays were performed in 96 well round bottom plates. Wells were coated over-night at 4°C with either 5 μg/mL of recombinant HER2-Fc or 8 μg/mL of rabbit-IgG (Sigma) as a control. Wells were then saturated 2 hours at room temperature with 3% BSA-PBS and recombinant His-tagged VHHs were added at concentrations of 130 (Fc-constructs) and 303 (SNAP-constructs) nM. After 1 hour incubation at room temperature, the specific signal was visualized by incubating the samples 1 hour at room temperature in the presence of anti-His primary antibody (Tebu Bio) followed by a goat anti-mouse conjugated to peroxidase (Pierce). The OD was measured at 450 nm. Cell ELISA with VHH-Fc was performed using the same protocol and 105 cells in suspension/well instead of purified HER2.

Surface plasmon resonance analysis

The affinity and avidity of the anti-HER2 constructs for their substrate was measured at 25°C using a ProteOn XPR36 (BioRad). Fc-HER2 ectodomain produced in mammalian cells (96 kDa) was diluted to 2 μg/mL in sodium acetate buffer (pH 5.0) and immobilized by amine-coupling on a GLC chip (BioRad) at 2000 RU. 100 μL of antibodies were used as analyte and injected at 100 μL/min. The complete kinetic data set for each antibody was collected in a single run and fitted using a 1:1 Langmuir interaction model. Surface regeneration was performed using 10 mM glycine HCl, pH 2.0 (IgG-like format) or 3.0 (VHH format).

Immunofluorescence

MCF10A and SKBR3 cells were seeded on coverslips overnight. The day after, cells were first incubated 15 min at room temperature in 4% PFA-PBS and then 2 hours at room temperature in the presence of the antibodies. Samples were incubated 45 min in the dark in the presence of suitable Cy3-conjugated antibodies and finally mounted on microscope slides by using Mowiol.

Tumor targeting in vivo

Trastuzumab, the C8 single-domain fused to rabbit Fc (C8-Fc), and the anti-GFP control VHH were diluted to 1 mg/mL in PBS and incubated in the presence of CF770 NHS esters (IVIS Xenolight, Caliper) at a 7.2 dye-to-protein molar ratio according to the manufacturer's protocol. Unreacted CF770 dye was removed by gel filtration using a NanoSep vial (IVIS Xenolight, Caliper). Labeled protein samples were stored in the dark at 4°C.

HER2 positive BC111 tumor model was grafted subcutaneously into the interscapular fat pad of female Swiss nude mice under anesthesia. Experimental protocol and animal housing were performed according to institutional and French Ethics Committee guidelines (Agreement B75-05-18, France). Xenografts of 0.6-1 mm developed two months after grafting, mice were anaesthetized with isoflurane and 25 (3 hour experiments) or 100 μg (48 hour experiments) of CF770 labeled antibodies in a total volume of 100 μL were injected intravenously in the tail vein. Infra-red fluorescence images were acquired using IVIS Spectrum equipment and analyzed with Living Image 3.2 software (Caliper Life Sciences).

Additional files