Abstract
Semiconductor quantum rings are topological structures that support fascinating phenomena such as the Aharonov–Bohm effect and persistent current, which are of high relevance in the research of quantum information devices. The annular shape of quantum rings distinguishes them from other low-dimensional materials, and enables topologically induced properties such as geometry-dependent spin manipulation and emission. While optical transition dipole moments (TDMs) in zero to two-dimensional optical emitters have been well investigated, those in quantum rings remain obscure despite their utmost relevance to the quantum photonic applications of quantum rings. Here, we study the dimensionality and orientation of TDMs in CdSe quantum rings. In contrast to those in other two-dimensional optical emitters, we find that TDMs in CdSe quantum rings show a peculiar in-plane linear distribution. Our theoretical modeling reveals that this uniaxial TDM originates from broken rotational symmetry in the quantum ring geometries.
Similar content being viewed by others
Introduction
Optical transition dipole moments are key parameters in determining the interactions between optical emitters and external electromagnetic fields. Controlled orientation and alignment of TDMs have led to optoelectronic1,2 and quantum photonic3,4 devices with unprecedented performance. The properties of TDMs are determined by the emitters’ electronic structures, which are closely related to their compositions, dimensions, and geometries. For instance, TDMs in zero-dimensional semiconductor quantum dots and two-dimensional nanoplatelets and transition-metal dichalcogenides have shown anisotropic two-dimensional distributions5,6,7,8, whereas those in one-dimensional nanorods and nanowires are uniaxial9,10.
In semiconductor quantum rings (QRs), charge carriers are confined in the radial direction. This quantum confinement effect, in combination with the unique ring geometry, has led to the observation of geometry-dependent photon antibunching11 and angular momentum-dependent emission in QRs12, which may enable a new class of quantum photon sources capable of high-density information coding for quantum communication13,14 and quantum imaging techniques15. The Aharonov-Bohm effect in QRs16,17 may also provide a promising avenue for single photon trapping, storage, and release by the use of an electric field18. To explore these intriguing quantum photonic properties of QRs, a critical first step required for their realization and application in quantum information science is a detailed understanding of their intrinsic TDMs. Moreover, the study of TDMs in a topological ring structure is fundamentally interesting as QRs represent a crossover between one- and two-dimensional structures due to their peculiar annular geometry.
Here, we investigate the dimensionality and orientation of the TDMs in CdSe QRs using single particle optical spectroscopy. We find that despite their two-dimensional annular shape, CdSe QRs exhibit an in-plane linear distribution. Our empirical tight binding calculations show that this uniaxial TDM is caused by the broken rotational symmetry in the QR geometries.
Results
Quantum ring geometry and optical spectra
CdSe QRs with emission wavelengths at around 675 nm (Fig. 1a–c) were synthesized following our previously published method19. Their average outer ring diameters (OD1 and OD2) along two perpendicular axes are 13.3 ± 1.1 nm and 9.9 ± 1.0 nm, respectively, with certain degrees of lateral elongation visible (see Supplementary Note 1 for statistics). The corresponding average inner ring diameters, ID1 and ID2, are 6.1 ± 0.9 nm and 3.8 ± 0.7 nm, respectively. Hence, the average thickness of the rings varies from t1 = 3.6 nm along the long axis to t2 = 3.0 nm along the short axis. The average height h of the QRs was around 5.0 nm. Emissive QRs dispersed on substrates were located by raster scanning samples through the focus of a laser beam. Time-dependent measurements of single QR spectra show photoluminescence blinking and spectral shift (Fig. 1e), both of which are characteristic of single quantum emitters and often attributed to charge carrier trapping at surface states20,21,22.
Ensemble and single particle characterization of CdSe quantum rings. a, b TEM images of the CdSe QRs. Scale bars in a and b represent 50 nm and 5 nm, respectively. c Absorption and emission spectra of CdSe QR ensembles. The vertical dashed line indicates the excitation wavelength for the single particle measurements. The inset is a schematic of the ring geometry. d A scanning photoluminescence image of single QRs. Scale bar: 1 µm. e A representative time-dependent spectral sequence of a single QR
Angle-resolved photoluminescence spectroscopy
Since the interaction strength of optical emitters with light is indicative of their intrinsic TDMs, we apply two independent imaging approaches to reveal the TDMs of the CdSe QRs. In both approaches, isolated CdSe QRs with random azimuthal orientations are dispersed on substrates and loaded onto home-built confocal laser microscopes. We excite the CdSe QRs at a wavelength of 633 nm to ensure that only band-edge optical transitions are involved. We first investigate the QRs utilizing angle-resolved photoluminescence spectroscopy on a Fourier imaging system (Fig. 2c. See Supplementary Note 2 for a detailed description of the setup). This technique allows direct imaging of k-vector resolved emission projections containing information about the orientations of the TDMs23,24. It is essential that a high numerical aperture (NA = 1.4) objective is used to focus the laser beam onto a single QR at a time and collect the corresponding emission. Intensity distributions of the QR emission at the back focal plane of the objective are recorded by a charge-coupled device. Our numerical simulations (see Supplementary Note 2 for details) show that the k-vector resolved emission pattern of a uniaxial TDM lying horizontally on a sample surface forms two bright lobes, whereas that of a uniaxial TDM lying vertically to the sample surface form a circular ring with an intensity nearly isotropic in the azimuthal angle (Fig. 2a, b). The distinct boundary between an inner and an outer region in the momentum space corresponds to the critical angle (θC) of total internal reflection at the glass-air interface, and radiation emits predominantly at angles larger than the critical angle into the high refractive index medium. The outer circle is defined by the maximum collection angle of the objective used in the measurements (θNA). Figure 2d, e show representative k-vector resolved radiation patterns measured from single CdSe QRs. Calculated radiation patterns of in-plane uniaxial dipoles with their azimuthal orientations adjusted to match the experimentally measured patterns are shown in Fig. 2g, h. Good agreement between the experimentally measured and theoretically simulated radiation patterns can be observed. This is further confirmed by comparing the k-vector resolved emission profile cuts from the experiments and calculations (Fig. 2i). Additional k-vector resolved cross sections parallel and perpendicular to the dipole axes shown in Fig. 2d, e are presented in Supplementary Note 2, and they show good agreement with the simulated profiles extracted from Fig. 2g, h. This infers that the TDMs in CdSe QRs are in-plane and uniaxial.
k-vector resolved Fourier imaging of single CdSe quantum rings. a, b Calculated k-vector resolved emission pattern of a TDM lying vertically a and horizontally b on a sample plane. The critical angle (θC) and the angle determined by the numerical aperture (θNA) are indicated. c Schematic of angle-resolved photoluminescence spectroscopy on a Fourier imaging system. d, e Measured radiation patterns of QRs highlighted in f. f A scanning photoluminescence image used to locate single QRs. Scale bar: 2 µm. g, h Calculated radiation patterns of QRs with their azimuthal angles adjusted to match those in d and e. i k-vector resolved emission profiles from experimentally measured (dots) and calculated (curve) radiation patterns
Higher-order laser scanning microscopy
To consolidate our conclusion of the uniaxial, in-plane nature of the TDMs in CdSe QRs, we apply a second approach based on higher-order laser scanning microscopy to study the absorption in QRs. This approach has been used to study TDMs of organic molecules25, and semiconductor8,26 and metallic nanoparticles27. When an individual particle is raster scanned through the focus of a higher-order Bessel–Gauss laser beam, its excitation pattern is characteristic of its TDMs at the excitation wavelength. Figure 3a, b shows the calculated transverse and longitudinal field components within the focal region of a radially polarized laser beam according to the parameters used in our experiment. The corresponding field intensity profiles are shown in Fig. 3c, d. When a uniaxial TDM lies horizontally in the sample plane, it interacts mainly with the transverse component of the radially polarized laser beam, leading to an excitation pattern consisting of two bright off-axis lobes (Fig. 3e). In the case that the uniaxial dipole lies perpendicularly to the sample plane, primarily the longitudinal component of the radially polarized laser beam interacts with the dipole, giving rise to an intense spot in the center. The relatively weak interaction between the transverse component of the laser beam and the vertical dipole results in a weak ring around the intense spot (Fig. 3f). Comparison between the calculated and experimentally measured excitation patterns enables the determination of the dimensionalities and orientations of the TDMs. Excitation patterns of individual CdSe QRs scanned through radially polarized laser beams exclusively show two bright off-axis lobes (Fig. 3g). The intensity profiles from the experimentally measured patterns and calculated patterns of a horizontally lying uniaxial dipole show a reasonable agreement (Fig. 3h). These results confirm our conclusion about the uniaxial, in-plane nature of the TDMs in CdSe QRs. We note that the TDMs studied here are the intrinsic properties of the QRs given their specific composition and geometry, while their emission polarization may not be uniaxial due to the renormalization effect caused by the differences in the dielectric constants of the QRs and their surrounding environment8,28,29.
Higher-order laser mode scanning microscopy of single CdSe quantum rings. a, b Numerically simulated transverse and longitudinal components of a radially polarized Bessel-Gauss laser beam. c, d The corresponding intensity profiles of the transverse c and longitudinal d electromagnetic components. e, f Calculated excitation patterns of a uniaxial TDM lying horizontally e or vertically f on the sample plane. g Experimentally measured excitation patterns of individual CdSe QRs. h Calculated intensity profiles of a horizontally lying uniaxial TDM (curve) and measured intensity profiles from the excitation patterns of a single CdSe QR (dot). The dimensions of a, b, e, f are 1.27 × 1.27 µm2. The dimensions of c, d are 2.53 × 2.53 µm2. The scale bars in g are 1 µm
Calculations of wavefunctions
In bulk zinc blend CdSe, the heavy-hole and light-hole bands are degenerate. However, in a quasi-two-dimensional zinc blend CdSe nanoplatelet, the quantum confinement in the z ([001]) direction leads to a lifted heavy-hole band which possesses a mixed px and py symmetry with no pz contributions7. Here, x and y are in-plane directions. Thus, an optical transition between the conduction band edge state, which has a s-like symmetry, and heavy-hole band forms an isotropically distributed in-plane TDM. CdSe QRs could be considered as two-dimensional topological structures that are warped analogs of quantum wires. However, in stark contrast to CdSe nanoplatelets7,8 and other two-dimensional optical emitters such as transition-metal dichalcogenides6 which possess isotropic two-dimensional TDMs, QRs are found here to show TDMs with properties similar to that of one-dimensional structures9. It appears that topology plays a significant role in determining their TDMs. To understand this finding, we calculate the electronic energy levels and wavefunctions of the CdSe QRs that determine their TDMs. We start by looking at the solutions of two-dimensional infinite ring well potentials. The potentials are defined by the ring outer diameters along the x and y axes to the center of the ring (OD1 and OD2) and the corresponding inner diameters (ID1 and ID2). The ring thicknesses t1 and t2 along the x and y axes are defined as: t1 = \(\frac{1}{2}\)(OD1−ID1) and t2 = \(\frac{1}{2}\)(OD2−ID2). Within the ring, the potential is set to zero, whereas outside of the ring, the potential is infinite. When OD1 = OD2 = 13.3 nm and t1 = t2 = 3.6 nm (Fig. 4a, b), the ring is circular with a continuous rotational symmetry. We use the discrete variable representation to solve this system30. Solutions to the Schrödinger equation with this potential admit an s-type orbital, where the wavefunction shows a symmetric distribution through the ring, as the ground state, and p-type orbitals, where there are two lobes along different axes, as the second lowest state. Due to the continuous rotational symmetry, these solutions are not unique. A rotation of any amount of the p-type orbitals would also be a solution. However, when one of the axes is longer than the other (OD1 = 13.3 nm, OD2 = 9.9 nm) while the ring thickness is kept constant (t1 = t2 = 3.6 nm), breaking of the continuous rotational symmetry leads to the lifting of the p- and d-type orbitals as the two lowest states, which now show a preferential location for the wavefunction lobes (Fig. 4e, f). In this case, there is a preferred direction for a uniaxial dipole excitation between the two. Further adoption of the experimental geometry of OD1 = 13.3 nm, OD2 = 9.9 nm, and t1 = 3.6 nm, t2 = 3.0 nm gives similar wavefunction distributions and uniaxial dipole orientations (Fig. 4i, j).
Calculations of the electronic structures of CdSe quantum rings. a, b Calculated wavefunctions of the two lowest states of two-dimensional infinite well potentials with OD1 = OD2 = 13.3 nm, ID1 = ID2 = 6.1 nm, and t1 = t2 = 3.6 nm. c, d 2D slices of wavefunctions of a CdSe QR (OD1 = OD2 = 13.3 nm, ID1 = ID2 = 6.1 nm, t1 = t2 = 3.6 nm, and h = 5.0 nm) corresponding to the conduction band (CB) minimum c and the valence band (VB) maximum d calculated using an empirical tight-binding method. The slices are in the xy plane and cut through the center of the rings. e, f Calculated wavefunctions of the two lowest states of two-dimensional infinite ring well potentials with OD1 = 13.3 nm, OD2 = 9.9 nm, and ID1 = 6.1 nm, ID2 = 2.7 nm, and t1 = t2 = 3.6 nm. Breaking of the continuous rotational symmetry leads to the lifting of the p- and d- type orbitals as the two lowest states. An optical transition between these two orbitals has a uniaxial transition dipole. g, h 2D slices of wavefunctions of a CdSe QR (OD1 = 13.3 nm, OD2 = 9.9 nm, and ID1 = 6.1 nm, ID2 = 2.7 nm, t1 = t2 = 3.6 nm, and h = 5.0 nm) corresponding to the conduction band minimum g and the valence band maximum h calculated using an empirical tight-binding method. i, j Wavefunctions of the two lowest states of two-dimensional infinite ring well potentials with OD1 = 13.3 nm, OD2 = 9.9 nm, ID1 = 6.1 nm, ID2 = 3.8 nm, t1 = 3.6 nm, and t2 = 3.0 nm. k, l 2D slices of wavefunctions of a CdSe QR (OD1 = 13.3 nm, OD2 = 9.9 nm, and ID1 = 6.1 nm, ID2 = 3.8 nm, t1 = 3.6 nm, t2 = 3.0 nm, and h = 5.0 nm) corresponding to the conduction band minimum k and the valence band maximum l calculated using an empirical tight-binding method. Localization of the band edge states due to broken rotational symmetry can be observed. Scale bars: 5 nm
To simulate the QR structures with realistic potentials, we solve for the band-edge states using an empirical tight-binding method utilizing the QNANO computational platform (see Methods for details)31,32. Since we focus on band edge single particle energy states, we do not directly take into account exchange splitting. However, we expect this effect to be small as magnitudes of anisotropic exchange splitting in CdSe nanostructures33,34,35 is much smaller than the thermal energies in our experiments. These calculations show that in realistic QRs, though the pure geometry is still a factor, a three-dimensional, atomistic ring adds additional complexity to the electronic structure. This is because the discrete nature of the atomic positions breaks the continuous rotational symmetry present in the infinite ring potential, even in the case of OD1 = OD2 = 13.3 nm, t1 = t2 = 3.6 nm, and h = 5.0 nm (Fig. 4c, d) (see Supplementary Note 3 for vertical cross sections). Here, the wavefunction of the lowest conduction band level (Fig. 4c) is no longer perfectly symmetric as was observed for the infinite well potentials, although it is still generally delocalized around the ring and keeps the s-type character. The overlap of the electron (Fig. 4c) and hole (Fig. 4d) wavefunctions results in a two-dimensional optical transition dipole moment with components along both the x and y axes. For CdSe QRs with OD1 = 13.3 nm, OD2 = 9.9 nm, t1 = t2 = 3.6 nm, and h = 5.0 nm (Fig. 4g, h), both the oval nature of the quantum ring and the atomic structure break the rotational symmetry. In this case, the elongation of the QR leads to the localization of wavefunctions in the thick end of the oval-shaped rings for both band edge states (Fig. 4g, h), although the wavefunctions are still mostly delocalized around the whole ring, and hence has a two-dimensional transition dipole. There are still some effects from the local atomic structures, which break the symmetry between the left and right lobes, although the effects are less significant compared to these in QRs with a smaller thickness (see Supplementary Note 4 and 5 for ring thickness dependent atomic structure effects). For the ring geometry that most closely represents our experimentally measured QR samples, the differential thickness (t1 = 3.6 nm, t2 = 3.0 nm) further breaks the rotational symmetry and causes additional localization of the wavefunctions in the thick end of the ring, as shown in Fig. 4k, l. This strong, geometry-induced localization leads to a uniaxial, in-plane dipole, as was observed in our experimental measurements. We note that even though the rings vary slightly in size and shape, they are essentially ovals with certain thickness variations (Supplementary Note 1). As shown in Fig. 4k, l and Supplementary Note 3–7, this geometry, over a wide range of possible parameters, gives rise to mostly uniaxial dipoles. Our simulations also show that the specific symmetry breaking between the different wavefunction lobes varies for QRs with various crystallographic orientations (Supplementary Note 6), but their TDMs still remain uniaxial and in-plane. Moreover, the calculated energy difference between the two band edge states of 1.84 eV matches very well with the experimentally observed band edge absorption and emission wavelengths (Fig. 1c).
Discussion
In summary, we find that the symmetry-related electronic properties of nanostructures are highly susceptible to both geometrical variations and the local atomic structures. In our QR structure, the combination of these two effects leads to a localization of the wavefunctions and consequently, a uniaxial transition dipole moment in a two-dimensional QR structure. Our finding not only has important implications for the quantum photonic applications of QRs11,17,18, but may also enable the development of a new class of quantum materials. Specifically, the introduction of optical spin-orbit coupling through an asymmetric ring geometry may enable the occurrence of an optical Berry phase for photon manipulation and the examination of non-trivial topological effects36. The spatial asymmetry-caused Rashba effect could be utilized to obtain a long spin coherence time37. These features, together with the high spin stability in QRs38, make them attractive as spin qubits and for applications in spin field-effect transistors.
Methods
Synthesis of CdSe quantum rings
CdSe QRs were synthesized following a previously published method19. CdSe nanoplatelets were first synthesized at 240 °C from Cd myristate, Cd acetate, and Se power in 1-octadecene. They were then precipitated with ethanol and re-dispersed in a mixture of 1-octadecene and oleylamine in a three-neck flask. A suspension of Se in oleylamine was added into the flask as well. The contents of the flask were then degassed at room temperature for 10 min, heated up to 140 °C under nitrogen and maintained in this condition for 10 min. After injecting a certain amount of tributylphosphine into the flask, the temperature of the mixture was increased to 220 °C. The solution was then allowed to cool to 37 °C. Finally, ground Cd formate was added to the mixture and it was stirred for an hour.
Transmission electron microscopy of the samples were performed using a 300 kV FEI Tecnai F30 microscope. Absorption and emission spectra of the solutions were collected using a Cary 5000 UV-Vis-NIR spectrometer and FluoroMax-4 spectrofluoremeter, respectively.
Single quantum ring optical spectroscopy and imaging
To prepare samples for single particle optical measurements, the stock solutions of QRs were diluted by hexane and spin coated onto quartz or glass cover slips. Optical measurements of single QRs were performed on home-built confocal laser scanning microscopes at room temperature. The angle-resolved photoluminescence spectroscopy was performed on a Fourier imaging system (see Supplementary Note 2). In this method, to inhibit photoluminescence blinking of the QRs, a layer of polystyrene was deposited onto the QRs. This was considered within the dipole distribution simulations by adjusting the refractive index of the upper half-space to n1 = 1.1, since the presence of the polystyrene thin film will increase the effective refractive index experienced by the QRs. The lower half-space refractive index n2 was defined by the glass cover slide, index matching oil and objective and given with n2 = 1.52. A continuous wave HeNe laser with a wavelength of 633 nm was focused by a microscope objective (NA = 1.4) to excite the samples. Emission from the QRs was collected by the same objective and sent to a cooled charge-coupled device (CCD) after spectral filtering. A Bertrand lens was used to form an image of the back focal plane on the CCD. The higher-order laser scanning microscopy of the QRs were performed using similar excitation conditions, except that the Gaussian laser beam was converted into a higher-order radially polarized beam and a microscope objective with NA = 1.49 was used. Emission from the QRs collected by the objective was focused onto an avalanche photon diode to form confocally scanned images.
Theoretical modeling of quantum rings
The two-dimensional infinite potential well calculations were performed using a discrete variable representation with a sinc basis30. Two ovals, defined by the parameters OD1, OD2, ID1, and ID2 (see Fig. 1c), were defined. Any points in the discretized space in between these two ovals had a potential of zero; any point outside had a potential set arbitrarily high, defining a Hamiltonian matrix. This matrix was diagonalized using the parallel eigenvalue solver package SLEPc39 for the eigenstates with eigenvalues closest to zero.
To calculate the energy levels and wavefunctions of the CdSe QRs, we started with a large supercell of zinc-blend CdSe atoms with lattice constant 6.052 Å. We then defined an ideal three-dimensional generalized torus, where any slice along z was defined by two ovals in the x, y plane. In the middle of the ring along the z dimension, these two ovals were defined by the parameters OD1, OD2, ID1, and ID2. Towards the edges of the ring in the z plane (defined by the height of the ring, h), the parameters of the two ovals changed such that a slice along the x or y planes results in an oval. Any atom which fell inside of this three-dimensional geometry was kept; any atom outside of the ring was discarded. After cutting out the ring, we iteratively looped through all atoms and removed any atoms which had only a single bond until all atoms had at least two bonds. This may result in unequal numbers of Cd and Se in the QRs, but since we are not doing total energy calculations, a slight nonstoichiometry should not alter our calculation results. Using this set of atoms, we solved for the band-edge states using the empirical tight-binding method within the code QNANO31,32. Within the empirical tight-binding method, a set of orbitals was defined for each atom. The parameters of these orbitals were fit to density functional theory calculations of bulk systems. The method solved for the eigenstates near the band-edge using the basis of these parameterized orbitals.
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Jurow, M. J. et al. Understanding and predicting the orientation of heteroleptic phosphors in organic light-emitting materials. Nat. Mater. 15, 85–91 (2016).
Wu, T.-L. et al. Diboron compound-based organic light-emitting diodes with high efficiency and reduced efficiency roll-off. Nat. Photon. 12, 235–240 (2018).
Akselrod, G. M. et al. Probing the mechanisms of large Purcell enhancement in plasmonic nanoantennas. Nat. Photon. 8, 835–840 (2014).
Chikkaraddy, R. et al. Single-molecule strong coupling at room temperature in plasmonic nanocavities. Nature 535, 127–130 (2016).
Empedocles, S. A., Neuhauser, R. & Bawendi, M. G. Three-dimensional orientation measurements of symmetric single chromophores using polarization microscopy. Nature 399, 126–130 (1999).
Schuller, J. A. et al. Orientation of luminescent excitons in layered nanomaterials. Nat. Nanotechnol. 8, 271–276 (2013).
Scott, R. et al. Directed emission of CdSe nanoplatelets originating from strongly anisotropic 2D electronic structure. Nat. Nanotechnol. 12, 1155–1160 (2017).
Ma, X. et al. Anisotropic photoluminescence from isotropic optical transition dipoles in semiconductor nanoplatelets. Nano Lett. 18, 4647–4652 (2018).
Shabaev, A. & Efros, Al. L. 1D exciton spectroscopy of semiconductor nanorods. Nano Lett. 4, 1821–1825 (2004).
Hartmann, N. et al. Launching propagating surface plasmon polaritons by a single carbon nanotube dipolar emitter. Nano Lett. 12, 177–181 (2012).
Abbarchi, M. et al. Photon antibunching in double quantum ring structures. Phys. Rev. B 79, 085308 (2009).
Lorke, A. et al. Spectroscopy of nanoscopic semiconductor rings. Phys. Rev. Lett. 84, 2223–2226 (2000).
Wang, J. et al. Terabit free-space data transmission employing orbital angular momentum multiplexing. Nat. Photon. 6, 488–496 (2012).
Wang, X.-L. et al. Quantum teleportation of multiple degrees of freedom of a single photon. Nature 518, 516–519 (2015).
Uribe-Patarroyo, N., Fraine, A., Simon, D. S., Minaeva, O. & Sergienko, A. V. Object identification using correlated orbital angular momentum states. Phys. Rev. Lett. 110, 043601 (2013).
Bayer, M. et al. Optical detection of the Aharonov-Bohm effect on a charged particle in a nanoscale quantum ring. Phys. Rev. Lett. 90, 186801 (2003).
Giesbers, A. J. M. et al. Correlation-induced single-flux-quantum penetration in quantum rings. Nat. Phys. 6, 173–177 (2010).
Fischer, A. M., Campo, V. L. Jr., Portnoi, M. E. & Römer, R. A. Exciton storage in a nanoscale Aharonov-Bohm ring with electric field tuning. Phys. Rev. Lett. 102, 096405 (2009).
Fedin, I. & Talapin, D. V. Colloidal CdSe quantum rings. J. Am. Chem. Soc. 138, 9771–9774 (2016).
Efros, Al. L. & Nesbitt, D. J. Origin and control of blinking in quantum dots. Nat. Nanotechnol. 11, 661–671 (2016).
Frantsuzov, P., Kuno, M., Janko, B. & Marcus, R. A. Universal emission intermittency in quantum dots, nanorods and nanowires. Nat. Phys. 4, 519–522 (2008).
Ma, X. et al. Size-dependent biexciton quantum yields and carrier dynamics of quasi-two-dimensional core/shell nanoplatelets. ACS Nano 11, 9119–9127 (2017).
Lieb, M. A., Zavislan, J. M. & Novotny, L. Single-molecule orientations determined by direct emission pattern imaging. J. Opt. Soc. Am. B 21, 1210–1215 (2004).
Curto, A. G. et al. Unidirectional emission of a quantum dot coupled to a nanoantenna. Science 329, 930–933 (2010).
Novotny, L., Beversluis, M. R., Youngworth, K. S. & Brown, T. G. Longitudinal field modes probed by single molecules. Phys. Rev. Lett. 86, 5251–5254 (2001).
Chizhik, A. I., Chizhik, A. M., Khoptyar, D., Bär, S. & Meixner, A. J. Excitation isotropy of single CdSe/ZnS nanocrystals. Nano Lett. 11, 1131–1135 (2011).
Failla, A. V., Qian, H., Qian, H., Hartschuh, A. & Meixner, A. J. Orientational imaging of subwavelength Au particles with higher order laser modes. Nano Lett. 6, 1374–1378 (2006).
Rodina, A. V. & Efros, Al. L. Effect of dielectric confinement on optical properties of colloidal nanostructures. J. Exp. Theor. Phys. 122, 554–566 (2016).
Feng, F. et al. Consequence of shape elongation on emission asymmetry for colloidal CdSe/CdS nanoplatelets. Nano Res. 11, 3593–3602 (2018).
Colbert, D. T. & Miller, W. H. A novel discrete variable representation for quantum mechanical reactive scattering via the S‐matrix Kohn method. J. Chem. Phys. 96, 1982–1991 (1992).
Zielinski, M., Korkusinski, M. & Hawrylak, P. Atomistic tight-binding theory of multi-exciton complexes in a self-assembled InAs quantum dot. Phys. Rev. B 81, 085301 (2010).
Korkusinski, M., Voznyy, O. & Hawrylak, P. Fine structure and size dependence of exciton and bi-exciton optical spectra in CdSe nanocrystals. Phys. Rev. B 82, 245304 (2010).
Furis, M. et al. Bright-exciton fine structure and anisotropic exchange in CdSe nanocrystal quantum dots. Phys. Rev. B 73, 241313 (2006).
Thomas, N. et al. Exciton fine structure in single CdSe nanorods. Phys. Rev. Lett. 94, 016803 (2005).
Fu, H., Wang, L.-W. & Zunger, A. Excitonic exchange splitting in bulk semiconductors. Phys. Rev. B 59, 5568 (1999).
Ma, L. B. et al. Spin–orbit coupling of light in asymmetric microcavities. Nat. Commun. 7, 10983 (2016).
Schliemann, J., Carlos Egues, J. & Loss, D. Nonballistic spin-field-effect transistor. Phys. Rev. Lett. 90, 146801 (2003).
Zipper, E., Kurpas, M., Sadowski, J. & Maśka, M. M. Spin relaxation in semiconductor quantum rings and dots—a comparative study. J. Phys. Condens. Matter 23, 115302 (2011).
Hernandez, V., Roman, J. E. & Vidal, V. SLEPc: a scalable and flexible toolkit for the solution of eigenvalue problems. ACM Trans. Math. Softw. 31, 351–362 (2005).
Acknowledgements
This work was performed, in part, at the Center for Nanoscale Materials, a U.S. Department of Energy Office of Science User Facility, and supported by the U.S. Department of Energy, Office of Science, under Contract No. DE-AC02-06CH11357. Financial support by the Deutsche Forschungsgemeinschaft (DFG) through the Nanosystems Initiative Munich (NIM) is gratefully acknowledged. P. H. and M. C. thank NSERC and University of Ottawa Chair in Quantum Theory of Materials for support. M. C. thanks Feodor Lynen Humboldt Fellowship.
Author information
Authors and Affiliations
Contributions
N.F.H. performed the optical measurements. I.F. and D.T. synthesized the quantum rings. M.O., M.C., P.H., M.K., and S.G. carried out the theoretical calculations. X.M. and A.H. initiated and supervised the project. All authors contributed to the data analysis and co-wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information: Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work.
Publisher’s note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Hartmann, N.F., Otten, M., Fedin, I. et al. Uniaxial transition dipole moments in semiconductor quantum rings caused by broken rotational symmetry. Nat Commun 10, 3253 (2019). https://doi.org/10.1038/s41467-019-11225-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-019-11225-6
- Springer Nature Limited
This article is cited by
-
Optical anisotropy of CsPbBr3 perovskite nanoplatelets
Nano Convergence (2023)
-
Quantum effects on modulational amplification in ion-implanted semiconductor magnetoplasmas
Pramana (2023)
-
Quantum Effects on Modulational Amplification Characteristics of Semiconductor Magneto-Plasmas
Iranian Journal of Science and Technology, Transactions A: Science (2022)