Abstract
Magnesium is the lightest and one of the most abundant elements in the universe. In addition, magnesium possesses several other benefits like excellent castability, high damping capacity, good electromagnetic shielding, and excellent machinability. These inherent characteristics of magnesium-based materials ensure fuel economy, reduced CO2 emissions, and a greener earth. Furthermore, as magnesium-based materials are almost 35% lighter than aluminum-based materials, a tremendous surge in magnesium demand over the next 5 years is expected. One way in which the engineering capabilities of magnesium and its alloys can further be enhanced is to use composite technology. The addition of nanoparticles, for example, leads to enhanced tensile, compressive, fatigue, creep, dynamic, tribological, and corrosion properties. In addition, amorphous and hollow reinforcements can also enhance targeted mechanical/physical properties. Accordingly, the present study will highlight the key capabilities of magnesium-based composite technology. An attempt is made to summarize on the size effects and type of reinforcements such as metallic or ceramic nanoparticles, and amorphous and hollow reinforcements on the microstructural and mechanical properties of monolithic pure magnesium.
Similar content being viewed by others
References
F. Czerwinski, Magnesium Injection Molding (Boston: Springer, 2008).
F.H. Froes, D. Eliezer, and E. Aghion, JOM 50, 30 (1998).
K.F. Farraro, K.E. Kim, S.L.Y. Woo, J.R. Flowers, and M.B. McCullough, J. Biomech. 47, 1979 (2014).
G. Kumar, M. Hoon, A. Almajid, and M. Gupta, J. Mater. Des. 65, 104 (2015).
F. Moll and K.U. Kainer, Magnesium: Alloys and Technology (Weinheim: Wiley, 2004), pp. 197–217.
H.Z. Ye and X.Y. Liu, J. Mater. Sci. 9, 6153 (2004).
E. Aghion and G. Golub, Friedrich ···Mordike Magnesium Technology (New York, NY: Springer, 1996).
R. Gehrmann, M.M. Frommert, and G. Gottstein, Mater. Sci. Eng. A 395, 338 (2005).
M.A. Thein, L. Lu, and M.O. Lai, Compos. Struct. 75, 206 (2006).
Q.C. Jiang, X.L. Li, and H.Y. Wang, Scr. Mater. 48, 713 (2003).
S.C. Vettivel, N. Selvakumar, R. Narayanasamy, and N. Leema, Mater. Des. 50, 977 (2013).
B.L. Mordike and T. Ebert, Mater. Sci. Eng. A 302, 37 (2001).
W.W.L. Eugene and M. Gupta, Adv. Eng. Mater. 7, 250 (2005).
S.F. Hassan, K.F. Ho, and M. Gupta, Mater. Lett. 58, 2143 (2004).
S.F. Hassan and M. Gupta, J. Alloy. Compd. 345, 246 (2002).
M.G.S.F. Hassan, J. Alloy. Compd. 335, L10 (2002).
D.J. Lloyd, Int. Mater. Rev. 39, 1 (1994).
G. Tagliavia, M. Porfiri, and N. Gupta, Int. J. Solids Struct. 47, 2164 (2010).
S.C. Tjong, Adv. Eng. Mater. 9, 639 (2007).
G.D. Cole, Chem. Eng. News 81, 52 (2003).
S.F. Hassan and M. Gupta, J. Alloy. Compd. 419, 84 (2006).
W.L.E. Wong and M. Gupta, Sol. St. Phen. 111, 91 (2006).
C.E. Wen, M. Mabuchi, Y. Yamada, K. Shimojima, Y. Chino, and T. Asahina, Scr. Mater. 45, 1147 (2001).
J. Subramanian, S. Seetharaman, and M. Gupta, Metals 5, 743 (2015).
M. Gupta, M.O. Lai, and C.Y. Soo, Mater. Res. Bull. 30, 1525 (1995).
M. Gupta and W.L.E. Wong, Mater. Charact. 105, 30 (2015).
M. Gupta and G.K. Meenashisundaram, Insight Into Designing Biocompatible Magnesium Alloys and Composites (Singapore: Springer, 2015), p. 24.
W.W.L. Eugene, M. Gupta, and J. Microw, Power Electromagnetic Energ.: A Publication Int. Microw. Power Inst. 44, 14 (2010).
R.M. German, Sintering Theory Practice (New York: Wiley, 1996).
G.K. Meenashisundaram and M. Gupta, J. Alloy. Compd. 593, 176 (2014).
W.L.E. Wong and M. Gupta, Compos. Sci. Technol. 67, 1541 (2007).
X.L. Zhong, W.L.E. Wong, and M. Gupta, Acta Mater. 55, 6338 (2007).
G.K. Meenashisundaram and M. Gupta, Mater. Sci. Eng. A 627, 306 (2015).
W.L.E. Wong and M. Gupta, Adv. Eng. Mater. 8, 735 (2006).
S. Sankaranarayanan, R.K. Sabat, S. Jayalakshmi, S. Suwas, and M. Gupta, Mater. Des. 56, 428 (2014).
M.K. Habibi, A.S. Hamouda, and M. Gupta, J. Alloy. Compd. 550, 83 (2013).
W.L.E. Wong and M. Gupta, Adv. Eng. Mater. 9, 902 (2007).
G. Meenashisundaram, M. Nai, and M. Gupta, Nanomaterials 5, 1256 (2015).
S. Sankaranarayanan, U. Pranav Nayak, R.K. Sabat, S. Suwas, A. Almajid, and M. Gupta, J. Alloy Compd. 615, 211 (2014).
S.F. Hassan and M. Gupta, J. Compos. Mater. 41, 2533 (2007).
K.S. Tun, W.L.E. Wong, Q.B. Nguyen, and M. Gupta, Materials 6, 1826 (2013).
S.F. Hassan and M. Gupta, J. Alloy. Compd. 429, 176 (2007).
S.F. Hassan, K.S. Tun, and M. Gupta, J. Alloy. Compd. 509, 4341 (2011).
S. Sankaranarayanan, R. Sabat, S. Jayalakshmi, S. Suwas, A. Almajid, and M. Gupta, J. Compos. Mater. 0, 1 (2014).
S. Seetharaman, J. Subramanian, K.S. Tun, A.S. Hamouda, and M. Gupta, Materials 6, 1940 (2013).
S. Sankaranarayanan, M.K. Habibi, S. Jayalakshmi, K. Jia Ai, A. Almajid, and M. Gupta, Mater. Sci. Tech. Ser. 31, 1122 (2015).
G.K. Meenashisundaram, S. Seetharaman, and M. Gupta, Mater. Charact. 94, 178 (2014).
S. Jayalakshmi, S. Sahu, S. Sankaranarayanan, S. Gupta, and M. Gupta, Mater. Des. 53, 849 (2014).
S. Sankaranarayanan, V. Hemanth Shankar, S. Jayalakshmi, N. Quy Bau, and M. Gupta, J. Alloy Compd. 627, 192 (2015).
P.K. Rohatgi, A. Daoud, B.F. Schultz, and T. Puri, Compos. Part A Appl. S 40, 883 (2009).
A. Daoud, M.T. Abou El-Khair, M. Abdel-Aziz, and P. Rohatgi, Compos. Sci. Technol. 67, 1842 (2007).
W. Gale and T. Totemeier, Smithells Metals Reference Book (Atlanta, GA: Elsevier, 2003).
B. Han and D. Dunand, Mater. Sci. Eng. A 277, 297 (2000).
Q. Zhang and D. Chen, Scr. Mater. 51, 863 (2004).
M.A. Meyers and K.K. Chawla, Mechanical Behavior of Materials (Cambridge: Cambridge, 2009).
C. Goh, J. Wei, L. Lee, and M. Gupta, Acta Mater. 55, 5115 (2007).
A. Sanaty-Zadeh, Mater. Sci. Eng. A 531, 112 (2012).
R. Vogt, Z. Zhang, Y. Li, and M. Bonds, Scr. Mater. 61, 1052 (2009).
N. Chawla, U. Habel, Y.-L. Shen, C. Andres, J.W. Jones, and J.E. Allison, Metall. Mater. Trans. A 31, 531 (2000).
N. Chawla, J.W. Jones, C. Andres, and J.E. Allison, Metall. Mater. Trans. A 29, 2843 (1998).
Q. Nguyen, Y. Sim, M. Gupta, and C. Lim, Tribol. Int. 82, 464 (2015).
C. Lim, D. Leo, J. Ang, and M. Gupta, Wear 259, 620 (2005).
B. Selvam and P. Marimuthu, Mater. Des. 58, 475 (2014).
G.K. Meenashisundaram, M.H. Nai, and M. Gupta, Magn. Technol., 413–418 (2015).
R. Del Campo, B. Savoini, A. Muñoz, M.A. Monge, and G. Garcés, J. Mech. Behav. Biomed. 39, 238 (2014).
T.S. Srivatsan, C. Godbole, T. Quick, M. Paramsothy, and M. Gupta, J. Mater. Eng. Perform. 22, 439 (2012).
T. Srivatsan and K. Manigandan, Metals 2, 143 (2012).
T.S. Srivatsan, C. Godbole, M. Paramsothy, and M. Gupta, J. Mater. Sci. 47, 3621 (2011).
Y. Chen, V. Shim, and M. Gupta, Appl. Mech. Mater. 566, 56 (2014).
Acknowledgements
The authors thankfully acknowledge the financial support granted by the Ministry of Education Academic Research Funding (WBS# R-265-000-498-112).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Meenashisundaram, G.K., Gupta, M. Emerging Environment Friendly, Magnesium-Based Composite Technology for Present and Future Generations. JOM 68, 1890–1901 (2016). https://doi.org/10.1007/s11837-016-1823-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11837-016-1823-3